Related
Hai guys I need help badly , here's the story, I bought my Samsung Galaxy S few weeks ago and I love it, few days ago I connected my Galaxy S and opened the Samsung Kies and it said there's update available for the firmware, so i went on and click it, then the whole upgrading firmware started. Then i checked the firmware, it is android version 2.2 aka Froyo. I was happy at first , but then i realise my phone lag badly! i cant pull down notification drawer, the drawer will stuck and in order to use my phone, i have to click the back button, so that the stucked drawer will close, and i cant type properly, lag lag and lagggs! WHAT ACTUALLY HAPPENED GUYS? CAN ANYONE ANSWER ME PLEASE? IS THERE ANY WAY TO FIX THESE LAGS? should'nt Froyo be faster and better? please please i need help... should I use Anvanced task killer or anything?
p/s: im from Malaysia anyway, anybody from Malaysia had the same problem? please anyone help me please
maybe boot into recovery and clear cache/dalvich cache and factory reset.
Just instal a lag fix like voodoo 5
Connect and Share
http://twitter.com/gadgetcheck
Sent from my GT-I9000 using XDA App
First thing you should do is a complete factory/data reset. The upgrade process isn't very good
@tragusman: erm how to boot into recovery, sorry im clueless ...
nwsk said:
First thing you should do is a complete factory/data reset. The upgrade process isn't very good
Click to expand...
Click to collapse
Hai, so if i reset the phone it'll go back to Eclair? and then connect again to Kies and update to Froyo again?
@ gadget check: Hai erm is that available in the market? the voodoo 5?
Just search for it on XDA and u will get all the steps to speed up ur SGS
Connect and Share
http://twitter.com/gadgetcheck
Sent from my GT-I9000 using XDA App
I think the things he is experiancing is more than lag its as above mentioned upgrading can leave things slow and reseting clearing cache etc is recomended.
Turn phone off then hold down power volume up and the middle button till it goes into recovery also you could use quick boot from the market its free and it will boot into recovery if the 3 button mode doesnt work.
No it wont put you back to 2.1 but may wipe contacts apps etc but the plus is a clean start.
@Gadget Check: alright thanks I shall search it up ...
@Tragusman: ok ok, thanks alot ! shall search up quick boot from android mart ...
I tried servel time to burn the froyomod 2.2.0 or the cm 6.1 rom and everything go o.k until the first boot up I get a message that com.android.process has stopped and this repat every 5 sec and I have no signal ,I tried like burn over ,wipes ,try diffrent rom's nothing work and something interest is that when I set filght mod everything work's great , I think the phone cannot connet to my opreator(cellcom, isreal) and that's why this happning ,please help me solve this issue.
happy new year everybody and thx
no one cant help, I really freak out to solve this issue
Hi matanamos,
have you wiped data/cache before flashing?
For 2.2 ROM's it might be recommended, to install one of the full G.O.T. 2.2.1 SBF images with RSDlite first.
Hope this helps!
Cheers,
scholbert
I tried everything you said and nothing work.
I really want to move from 2.1
BTW THX
nobody cant help me??
matanamos said:
nobody cant help me??
Click to expand...
Click to collapse
Did you really try to flash the G.O.T. 2.2.1 SBF image with RSDlite?
What happened afterwards?
We should try to break the problem down to pieces, so anyone could follow
Regards,
scholbrt
matanamos said:
I tried servel time to burn the froyomod 2.2.0 or the cm 6.1 rom and everything go o.k until the first boot up I get a message that com.android.process has stopped and this repat every 5 sec and I have no signal ,I tried like burn over ,wipes ,try diffrent rom's nothing work and something interest is that when I set filght mod everything work's great , I think the phone cannot connet to my opreator(cellcom, isreal) and that's why this happning ,please help me solve this issue.
happy new year everybody and thx
Click to expand...
Click to collapse
Did you install the correct baseband files?
For example, the ROM you installed could be using Europe 3G and your operator could be running North American 3G (no idea what your provider uses, but you should look it up).
Once you know, you could choose the appropriate baseband in either GOT Open Recobery or Androidiani OR.
There are some manual ways (file copying) to do this, but it is more complicated to do then through OR (especially if you already flashed).
I do what you say with the OR Androidiani and I set Basehane Israel-Cellcome (the one I use) and nothing help the phone keep send me the erorr ,
I dont know what to do anymore!
matanamos said:
I do what you say with the OR Androidiani and I set Basehane Israel-Cellcome (the one I use) and nothing help the phone keep send me the erorr ,
I dont know what to do anymore!
Click to expand...
Click to collapse
try this
go to the open recovery menu wipe the cache and dalvik cache and then change the baseband and wipe the dalvik cache and cache again
if still can't then try using RSD lite to flash the GOT 2.2.1 SBF then wipe the cache and dalvik cache
let us know what happens next
First of all thx for your comment,
When I burn firstly the G.O.T 2.2.1 the Rom works(he recognize my opreator(cellcom)) great and after I burn the ROM I want like Froyomod or MIUI I still get the Erorr!
please andybody?!?!?
I had the same issue. This is what I did.
Flash the original sbf using rsd lite. Flash vulnerable recovery using rsd lite. Flash CM using OR. Then do a dalvik, cache and full system wipe. Reboot.
This solved my issue. But remember, whenever ur flashing the original sbf and the bootloader, do not boot into android. Keep the Direction Pad up key pressed so you always boot into the bootloader when Rsd lite reboots ur phone.
Try that and pm me if you still have issues.
I must use the CM ROM or I can use the FROYOMOD instead!?
and I dont understand what I have to do after I Flshe the Rom By the RSD LITE , you mean after the RSD LITE flash my SBF and restart my phone I need AUTO get into bootloader agian1?
and what you mean by the "Original Sbf"?
The yellow sim is cause to the Force Close problam.
hhhh LOLLL matan?!?! XD i recogenize you XD
Some ROMs overclock by default ( i believe most do by now).
This makes you phone faster, but potentially less stable with some (rare) milestones. You be may unlucky with you phone.
You should check to see if this is the case.
Either edit the 10overclock file manually from a shell in your recovery if use a recovery that supports overclock and disable it (set it back to stock 550).
Another option, if you really want to overclock, is to up the max vsel to gain stability. But as this requires trial and error, i would test the stock speeds first to confirm that this is indeed the problem.
It may not be overclocking, but it sure sounds like what happens when you have just enough vsel to boot but not enough to be stable.
Sent from my Milestone using XDA App
Im cant belive that the oc cause the fc.
The new yellow usim in cellcom--israel.
The kernal of 2.2 are not giving fc error. After rom installing the the fc popping up.
When i inserted the old sim (the purple one) the FC stopped to poping up.
I will try it. Update in a few hours!
TNX all!!!
Sent from my Milestone using XDA App
Pls anybody can try to help us out of this big issue
I dont know that to do anymore!
Thx to everybody that try to help us !!!!!!
matanamos said:
Pls anybody can try to help us out of this big issue
I dont know that to do anymore!
Thx to everybody that try to help us !!!!!!
Click to expand...
Click to collapse
I would try to do all three wipes from open recovery (cache partition, dalvik and full wipe) than apply update with the custom rom .zip and (very important!) set baseband frequencies for you country in open recovery.
First of all TNX alot!
I tried to do that (wipes, than install rom and baseband, RR than reboot.)
But it didnt work =/
Maby the KERNAL (got release) cause to the FC??
Sent from my Milestone using XDA App
plzz I tried everything and nothing help ,like Burn without sim ect
pllz anyone!
I've got a problem with my Galaxy tab. The problems are:
1. Whenever the device is turned off all the files are deleted - like a factory reset.
2. The language always reverts back to Chinese or something like that when turned off and on - I always need to change it back to English.
2. Recorded videos show unsupported file format when attempting to playback.
3. Doesn't charge using the wall charger when it is on but when it is off it's ok.
I've tried some TS like:
1. Factory Reset / Wipe Cache and anything I could see at Recovery.
2. Reflash Gingerbread
3. Tried downgrade to 2.2 - I haven't succeeded yet since I need some files to DL.
If anyone has an idea on how to solve it or encountered the problem pls share some thought.
The main problem I'm really frustrated is regarding the memory problem whereas I can't save any files nor store anything on the 16GB internal memory.
BTW, I'm running on 2.3.3 GB
BB: P1000DXJPD
Thank You.
this is wired ... can u tell us what is your Tab old firmware ?
and did you tried to back into froyo and back again to flash the gingerbread ?
k0sh said:
this is wired ... can u tell us what is your Tab old firmware ?
and did you tried to back into froyo and back again to flash the gingerbread ?
Click to expand...
Click to collapse
I can't really say what's the old firmware since my mom just gave it to me.
I'll be trying to flash it back to froyo later though I'm still trying to figure out what Firmware I should download since the last time I tried it, the tab only goes to a constant boot loop.
I can't really figure out what's the problem with this tab. It seems like it's using deepfreeze (PC App) Since, the prior files saved are still present even after turning it off. I even tried deleting those files but to no avail after reboot it returns.
So, I'll try flashing froyo and let's see.
Thanks.
what is your tab ? GSM , CDMA ?
k0sh said:
what is your tab ? GSM , CDMA ?
Click to expand...
Click to collapse
It's GSM, I've managed to flashed 2.2 now and the charging issue seems to be solved, could charge it now using the wall charger and via usb.
But the memory problem is still the same.
Let me expand on it a little more.
The internal memory which is 12.82 GB (12.80 Avail) and Internal Device Storage (1.85 GB) seems to be detected by the TAB, the problem is whenever I save a file or anything on it after reboot it's gone but some files (Pics) even though I delete it after reboot it comes back. It seems like the memory is froze or something.
Thanks.
craphack said:
It's GSM, I've managed to flashed 2.2 now and the charging issue seems to be solved, could charge it now using the wall charger and via usb.
But the memory problem is still the same.
Let me expand on it a little more.
The internal memory which is 12.82 GB (12.80 Avail) and Internal Device Storage (1.85 GB) seems to be detected by the TAB, the problem is whenever I save a file or anything on it after reboot it's gone but some files (Pics) even though I delete it after reboot it comes back. It seems like the memory is froze or something.
Thanks.
Click to expand...
Click to collapse
Did u use pit when u flashed the rom¿
Can u reflash and use pit and after that go to recovery and wipe data and factory reset and check whether it works or no . If not this is totally a freak and wirdo thing lol
Sent From Hell To Take Your Soul
k0sh said:
Did u use pit when u flashed the rom¿
Can u reflash and use pit and after that go to recovery and wipe data and factory reset and check whether it works or no . If not this is totally a freak and wirdo thing lol
Sent From Hell To Take Your Soul
Click to expand...
Click to collapse
Yes I've used a PIT file. I've successfully flashed it now with the ROM on this thread http://forum.xda-developers.com/showthread.php?t=939360.
Still the same so it seems like this is most probably a hardware problem.
I've noticed that when I connect the Tab to my pc as a media storage, I could see the files on the internal memory. I've tried deleting it manually and quick format it. But after disconnecting it the same files returns.
I'm now trying to format it the long way, not the quick format.
I have the EXACT same problem with my Galaxy Tab 7 inch Sprint. My internal memory boots up as read only and resets itself every time I boot the device.
I've been looking for days to figure out what I can do solve this but it really doens't seem promising.
I was able to make the internal memory read writable through adb shell with:
mount -o remount, rw /
The problem is, when I reboot. All the changes are gone. If anybody has a clue please post here or PM me. Thanks!
jrhsu529 said:
I have the EXACT same problem with my Galaxy Tab 7 inch Sprint. My internal memory boots up as read only and resets itself every time I boot the device.
I've been looking for days to figure out what I can do solve this but it really doens't seem promising.
I was able to make the internal memory read writable through adb shell with:
mount -o remount, rw /
The problem is, when I reboot. All the changes are gone. If anybody has a clue please post here or PM me. Thanks!
Click to expand...
Click to collapse
i didn't even root mine and i am having the same issue with a Verizon Galaxy Tab (CDMA)
u can try by flashing different firmware..i means if now u r using jqx1..try flash another that
Sent from my GT-P1000 using xda premium
Hi,
I've been on Spice default GB fw (downloaded from Spice India) site for quite some time and been living with the screen lag issues (i.e., whenever one switches on the phone, there is a substantial delay in the screen and the unlock pattern screen actually coming up).
Given to reviews that the Wellcom A99 318E firmware was the latest one and without this issue, I tried the same for the past week with smooth functioning and no screen lag. I rooted the same and tried removing some of the default apps in the same to lighten the memory hogging but there were some issues and I had to do reset. Post reset, there was a continuous phone restart problem because of which I had to use SUT L3 to again install the Wellcom A99 fw.
Now after the new installation, I'm facing the screen lag issue again. Any help or ideas?
Regards
Sandy
srawat_itpro said:
Hi,
I've been on Spice default GB fw (downloaded from Spice India) site for quite some time and been living with the screen lag issues (i.e., whenever one switches on the phone, there is a substantial delay in the screen and the unlock pattern screen actually coming up).
Now after the new installation, I'm facing the screen lag issue again. Any help or ideas?
Regards
Sandy
Click to expand...
Click to collapse
hi
try 318D take it from the below link this should not give u the lag problem
link : http://dl.dropbox.com/u/10031257/Mi410/Mi410GB13D.rar
haree said:
hi
try 318D take it from the below link this should not give u the lag problem
link :
Click to expand...
Click to collapse
Thanks for the response Haree,
Isn't this the one made available by Spice India... I think this was the original one that I tried earlier.
Regards
Sandy
hello srawat_itpro,
The best is to wipe all your cache and dalivk cache and plus wipe data back to Factory reset and install a custom rom. i guess that will resolve all your issues and make your phone awesome!.
srawat_itpro said:
Thanks for the response Haree,
Isn't this the one made available by Spice India... I think this was the original one that I tried earlier.
Regards
Sandy
Click to expand...
Click to collapse
hi
no 318E is india this is 318D this is also a CLS Rom dont rem were i got it
but this one is good and may be wont give u the screen lag try it
infact im using the 318E and now and im not getting screen lag which was their a long time back its kind a funny the way this phone of ours reacts
FYI see this my post if u want : http://forum.xda-developers.com/showthread.php?t=1365989
Thanks a lot Haree. I stuck to the 318E, only did a reset and restored back all the data and now except for one time there haven't been any screen lag issues. I believe the main issue is because of apps.
Another problem that I see now is the phone freezing and the random reboot issues. As I said earlier, I've used SUT L3 to go back to 318E and do not have the CWM recovery any longer. I guess I'll backup my data, put CWM and then after doing all the data / cache and dalvik cache wipe, would try out the stock 318E again. I liked the idea of Mac Lite FB rom but as I understand - there are several things removed from it for making it lightweight which are essential to me - such as FB sync and Google maps.
Will put this plan in action over the weekend as kinda swamped with work. Thanks for the help.
Rgds
Sandy
I have screen lag issues whenever I install Go Launcher and ProxyDroid together. Can others verify. This was on both the CherryMobile A01/A03 ROMs and the CSL Spice 318B/318D ROMs.
anandjm said:
I have screen lag issues whenever I install Go Launcher and ProxyDroid together. Can others verify. This was on both the CherryMobile A01/A03 ROMs and the CSL Spice 318B/318D ROMs.
Click to expand...
Click to collapse
hi
go launcher its ok i did not have any screen lag i dont know what proxydroid is for and i have not used it but i felt that the launhcer drained my battery very fast so i went back to zeam launcher
Go launcher is okay except that within a few days of installing it, I would start suffering from screen lag issues. Till then my phone was mostly stable. Anyway started using ADW Launcher EX which I bought of $0.10/INR5 during the timed promotion.
Look guys in ram we have the android system works
in my case when the ram fulled the system remove some apps to clear some space in my case the system remove itself so the screen stopped and hanged and the system restart without anything on the screen(last thing you used is still on the screen without responding) then the look screen appears after 1-2 minutes and then it start reading the sd card and the sim card(as any restart operation)
so why the system remove itself???!!!
Please Help me!!!!!
if you have problem with RAM use AUTO MEMORY MANAGER in aggressive Mode,it works very well!
Anyway...what kind of Rom are you using,kernel, governor,... we need more information!
In fact i don't know but I will look for them now
*-* But in my previous phone when the ram fulled it colsed the another apps not the system itself!!!so why this one??
@hemo-ali: Please respond interdan question for better help.
I remember, that you have stock rom (version ?). In this cases help a factory reset. It isn't normal that the OB will reboot.
Another solution is to make a rom update via LG-Updater (see LGs P970 page).
And how navigation?
okay look to the attachment
about factory reset I don't think it will help also i don't like to do that
update ?? i will look to it but which page do you mean official??
navigation the version 5.7 works good but I didn't try it yet
thnx
Official LG-site: lge.com and browse to the OB, there you can download de update-tool. If I remember correct it will erase all your things (apps, private data etc.) Also make a backup with LG-suite (also aviable in lg´s page).
I remember, that in some countries, google dosen`t offer navigation!
Regards!
No another solution ??!!
Nothing what you want do.
Regards!
Ah I forgot to tell you
my friend also have the same mobile and the same problem it may caused by our firmware which used in our country KSA but I can't flash any other one because I want Arabic language
hemo-ali said:
Ah I forgot to tell you
my friend also have the same mobile and the same problem it may caused by our firmware which used in our country KSA but I can't flash any other one because I want Arabic language
Click to expand...
Click to collapse
Have you tried v6 supercharger?
What is this??
hemo-ali said:
What is this??
Click to expand...
Click to collapse
This http://forum.xda-developers.com/showthread.php?t=991276
Ever you try to fix permission from CWM?
@slurpdroid: hemo-ali don´t want to root, don´t want make factory reset, he don´t want to update to stock v20.
hemo-ali: If you buyed your tlf. in an arabic speaking country, you can count with support of arabic letters in the update.
Regards.
Yeah i will try to update now but the b2capp hanged in installing in the third dash I will try again