Database Develop

Samsung i9000 stuck at boot screen no matter what i flash it to

I have tried everything, flashing with odin does not seem to work every time my phone starts up it just stays on the Samsung bootup screen then turns off for a split second and comes back on to that screen again. I have tried everything. I AM able to get in download mode so i can flash my phone but that is IT as recovery mode doesnt work, as i have tried all the methods.
-my phone was rooted and flashed and lagfix was applied.
Any1 know what i can do?
help would be greatly appreciated as my phone doesnt have wanrranty from Bell

( mutters)
ohhh
u should always disable a lagfix beforw installing a.rom.
( iv been with an android for a year and i know this?? lol) anyway try getting into download mode and factory reseting. if that doesnt work try connwcting to kies or if thoses dont work.....
CONGRATUALATIONS YOUR PHONE IS OFFICIALY BRICKED!!!!!
THE ONLY THING U HAVE TO SAVE U IS YOUR WARRENTY
HAVE A NICE DAY

how do i factory reset if i cant get into recovery mode or anything? i can only get into download mode. Is there a way to factory reset with kies or odin

Try the 3 button fix and see if u can get into recovery mode after that
http://forum.xda-developers.com/showthread.php?t=785201

i tried it, im only able to get download mode. Am I SOL? or is there a way i can enter recovery mode

You sure u did it corrently? pressed volume up + power + home and when the i9000 logo appeared released power
If not find some guide on going into recovery mode using adb
http://forum.xda-developers.com/showthread.php?t=723596

paulcordi said:
how do i factory reset if i cant get into recovery mode or anything? i can only get into download mode. Is there a way to factory reset with kies or odin
Click to expand...
Click to collapse
yes there is!!!
but with odin though( which is unfortunatley the hard way )
but before i tell you the odin way..............
feast your eyes on this: http://www.youtube.com/watch?v=eLYkMk16la8

first flash xwjm8 with odin
Then flash your region's eclair firmware. From there you know the route.
Wish you all the best.

thank you, i shall give it a try right now

Need to get a firmware with 4 files (pit, phone, modem, csc) then flash with odin and repartition. Should work now.
Sent from my GT-I9000 using XDA App

blockbusta said:
Need to get a firmware with 4 files (pit, phone, modem, csc) then flash with odin and repartition. Should work now.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
There is one: http://forum.xda-developers.com/showthread.php?p=11003642#post11003642
Repartition first, then flash the three files and everything should be OK then...

How can i get adb to see my device? i can get into download mode but that is it. Adb says device not found. I cant turn on the phone therefore i cant also get into usb debugging mode. Is that a problem? how can i get it to read my device?

paulcordi said:
How can i get adb to see my device? i can get into download mode but that is it. Adb says device not found. I cant turn on the phone therefore i cant also get into usb debugging mode. Is that a problem? how can i get it to read my device?
Click to expand...
Click to collapse
oh well u didnt turned on ur debug mode u adb wouldnt read ur phone, the best treatment for that is to flash ur phone with Official Roms, theres nothing to worry about if u can still go to download mode and if odin can detect ur phone

whats bells firmware called?

help bricked phone

Hi everyone. Im not normally in this section as i have an x8 but my friend has seen all the roms,mods and updates ive done so he tried to do it to his galaxy s i9000 without rooting or unlocking his bootloader. I asked him what he did he said he just tried to update software with keis but now it wont turn on just white screen with a red triangle in the middle i hope its download mode as i dont have a galaxy i dont really no but the battery has died and it wont charge im guessing hes damaged the bootloader am i right and if so whats the best corse of action to tepair it. Thanks.

You can check if it is in download mode by pluggin it in pc with odin. See the wiki page what it says about soft brick.
Soft-Bricked
After flashing a rom you might not be able to enter the Download Mode by pressing Volume Down + Home + Power. In this case a so called 'JIG' would be helpfull.
You could build it on your own: [HOWTO] [REF] Get Download Mode without 3-button combo using homemade JIG
... or buy a preassembled one on a well known marketplace.Hint: There is no difference between a JIG for Samsung S/S2 or S-Plus.

See if you can go into d0wnload mode with vol down home and power. If that works go and try to find the stock firmware for the phone and download and extract. Download odin and put csc pda and phone/modem in there rightful places. 512 pit in pit section. Pit usually comes with odin download. If not find it somewhere. Repartition checked and hit start. It should reboot when done. It will problaby take a couple of min to boot but be patient. If it starts to go into boot loop put back into download mode again and reflash. Its very hard to mess up the phone to where you cant fix it. So relax and watch tuts or whatever helps you best. I know of a link i that i will find and post for you when i do.
Sent from my GT-I9000 using XDA

http://forum.xda-developers.com/showthread.php?t=1102881
Sent from my GT-I9000 using XDA

DEAD bricked phone
So, my friend's phone (hopefully she'll stay my friend after this) was turning itself on and off all on it's own. So I (no good deed goes unpunished) suggested that I will upgrade her firmware for her. She had 2.3.3 firmware. I downloaded the odin1.7 as well as a package of all the info for 2.3.5 firmware upgrade. I flashed the phone- originally only using the PDA option with a file called: CODE_I9000XXJVS_CL565837_REV03_user_low_ship
It worked, the phone restarted and showed the firmware as being 2.3.5.
I don't know why, but I thought it would be a good idea to update the CSC and the pit and the modem as well- so I did that. when this was finished - though odin said that the flashing was successful the phone is completely unresponsive. The computer doesn't recognize it, it doesn't show any signs of life at all- like it's in the dark ages and there is no electricity in it.
HELP!!!
First question: do you think a jig will work? how dangerous is it?
second question: is there any other option to try that I haven't come across other than changing the motherboard, and if there isn't do you know where I can get one, bear in mind I live in Israel.
Please e-mail me a copy of the response to [email protected] if you can...

Odin dosnt pick it up atall plus the batteries dead aswell now and the stupid thing wont charge so i cant evan try any thing till i find away or some one to charge it but thanks for the tips.

gavster26 said:
Hi everyone. Im not normally in this section as i have an x8 but my friend has seen all the roms,mods and updates ive done so he tried to do it to his galaxy s i9000 without rooting or unlocking his bootloader. I asked him what he did he said he just tried to update software with keis but now it wont turn on just white screen with a red triangle in the middle i hope its download mode as i dont have a galaxy i dont really no but the battery has died and it wont charge im guessing hes damaged the bootloader am i right and if so whats the best corse of action to tepair it. Thanks.
Click to expand...
Click to collapse
Try to recharge the battery from other phone or use another battery.
Check whether you have the download mode working. (Home+Power+Volume down)
If yes, put phone in download mode and flash Darky RE or any other Rom via ODIN. Try to get the recovery mod after rooting and then try ROMs.
Or try restarting the phone it may work without update also. Long press power in download mode restarts the phone. However be careful.

What is the status of the device can you go to download mode
Post your firmware files name and how you choose in the odin flasher.
Dont try anything crazy you will bricked your device more:banghead:
Sent from my GT-P1000 using XDA

Alternate way to Download mode
Hi gavster26
I have been there with a buddy's phone... not a nice place.
Found a link showing this other trick ... but you have to trial and error this one on the different combos:
1. Phone off
2. USB cable pluged in
3. Odin running
4. Down (or Up - test both) Volume button + Home button + plug in the USB cable.
This booted my dead "bricked" phone into download mode.
Try it.

hard bricked, any advice before i use usb jig

soooooooo. I have a i9000m and i wanted to flash it using odin because cwm wasn't working and i googled for vibrant. so i didn't really pay attention to the title when it said ``captivate only`` http://forum.xda-developers.com/showthread.php?t=731989 it went through the odin process but phone didn't restart. it just turned off and stayed off so I unplugged and now, it just shows the at&t world phone white background screen. and keeps restarting. cant get to recovery or download mode. odin doesn't see it either. I read many forums and I think Im going to have to go with the usb jig but before I do Im just wondering if there's another method to get into download mode or some program or adb that can find the phone. thanks

pankajs37 said:
but before I do Im just wondering if there's another method to get into download mode or some program or adb that can find the phone. thanks
Click to expand...
Click to collapse
If you click the link below ( My Android Collections), you can try Easy Reboot Recovery..using ADB or the Android Recovery Tools, they have options for various functions, preset by developers

yeah....using adb is the only possibility i would take into consideration too

xsenman said:
If you click the link below ( My Android Collections), you can try Easy Reboot Recovery..using ADB or the Android Recovery Tools, they have options for various functions, preset by developers
Click to expand...
Click to collapse
thanks

pankajs37 said:
soooooooo. I have a i9000m and i wanted to flash it using odin because cwm wasn't working and i googled for vibrant. so i didn't really pay attention to the title when it said ``captivate only`` http://forum.xda-developers.com/showthread.php?t=731989 it went through the odin process but phone didn't restart. it just turned off and stayed off so I unplugged and now, it just shows the at&t world phone white background screen. and keeps restarting. cant get to recovery or download mode. odin doesn't see it either. I read many forums and I think Im going to have to go with the usb jig but before I do Im just wondering if there's another method to get into download mode or some program or adb that can find the phone. thanks
Click to expand...
Click to collapse
I accidentally Flashed a vibrant rom on my i9000. When I finally did get it into download mode with the JIG, I flashed back to stock firmware with ODIN and It totally ruined my phone.... The screen went all crazy and it kept rebooting faster than odin could do anything to it.
Just be careful. Im really not sure what happened But its pooched now for sure. JTAG is my only option on that one

if u dont own JIG or u dont know how to use ADB . the other way is
remove battery from phone /sim card / sd card
take the USB connect with ur Laptop or PC ( dont use it with charger it will not work)
connect with ur phone , then u will see the black screen being lil bit lighter
pres the 3 combos button to enter download mode and then flash ur ROM
this always worked for me , i hard bricked 4 times already my phone :/

Phone in download mode but computer not detect the phone

hi everyone
I have a samsung cappy ATT with CM10 before and it was not detecting my sim card so i decided to flash it back to stock so i can use it with sim.
I was so noob and went to CWM and wipe out everything (whatever i see on the menu that i see i can delete, i deleted them). Then now my phone it stucks in ATT logo when i turn on and my pc wont detect even in download mode. I am not able to boot to CWM so I can't flash with zip file. I did some research here and tried 3 different USB cable and 3 different desktop(XP and vista) and none of them detect my phone :crying:.
Just want to see if any expert here know the solution and help me out. My model is 1007 so i dont need a JIG to go download mode. I love my cappy and really it to back to life.
Please help

Odin

Im having trouble with odin. It will not recognize my phone while in download mode but it will recognize it any other time . I need some help im 90% on my way to kitkat and odin is actin stupid .help? Edit... never mind i figured it out . If someone has this issue the put the phone in download mode then plug it in a differant usb port and let it install whatever it installs then it should work .
Sent from my SAMSUNG-SM-N900A