Ugly fingerprints inside NEW and SEALED N7 right out of the box - Nexus 7 General

Ugly fingerprints on the back cover:
Dirt on the NFC antenna:
Device came to me today. It was ordered on Google Play in the UK. "Batch" C70.
This is the legendary "ASUS quality". Workers in fab doesn't even have gloves. Shame on you Asus.

radkor said:
Ugly fingerprints on the back cover:
Dirt on the NFC antenna:
Device came to me today. It was ordered on Google Play in the UK. "Batch" C70.
This is the legendary "ASUS quality". Workers in fab doesn't even have gloves. Shame on you Asus.
Click to expand...
Click to collapse
You'll find those finger prints on almost every device, it's probably from assembly.

You're actually that bothered about a few fingermarks?

No, I'm bothered by poor production process and quality, but for now I can only complain, nothing more.
Never saw a bit of any dust or fingerprint inside any other device.

radkor said:
No, I'm bothered by poor production process and quality, but for now I can only complain, nothing more.
Never saw a bit of any dust or fingerprint inside any other device.
Click to expand...
Click to collapse
4 of the 5 devices I've had have had the finger prints on the metallic piece.

I can confirm this too on my multiple N7's. When I saw them, my mind instantly went the pictures of the foxconn apple ipad factories. Gloves and gowns. Guess ASUS doesn't care about it.
Oh... but on a side note.. a least we can tell they didn't make little kids build our N7's!! They have all been adult sized prints!

Maybe we can use these fingerprints to identify people who lifted our screens? Haha, it's just a joke.

radkor said:
Maybe we can use these fingerprints to identify people who lifted our screens? Haha, it's just a joke.
Click to expand...
Click to collapse
I called the FBI to run the prints. We should have those bastards arrested in no time for putting fingerprints on our golden N7. LOLOLOLOL

OK, as now I know that these fingerprints are usual in our Nexuses this thread can be closed.

closed at request of OP...

Related

Custom Easecases now up on eBay

Had one of these made for my HD2, its very nice. They are now available for the Streak! Here is an example.
http://cgi.ebay.co.uk/E2-Custom-Mad..._MobilePhonesCasesPouches&hash=item563db6019b
I am considering that case and also thinking about using the shield, but we shouldn't need anything for the screen? It's Gorilla Glass! Anyone try pounding on it with their pen? HAHA .. Besides 5" screen that was one of their main selling points?
I had a leather case for my iphone and once I decided I was keeping it, not going to eBay it, I sometimes let it just drop naked into my purse in one of the zipper compartments. With the Streak it should be able to take a beating, but it is too new to keep out of a case .. I feel obligated to wrap it in something ... Mink maybe !!
Gorilla glass isnt unscratchable, its just harder to scratch. A rough edged metal thing will scratch it if pressure is applied to it. Its toughened though so shouldn't shatter.
I wont be using a screen protector, but i will get a case. Rumour has it that the iPhone 4 has a form of Gorilla glass on the front (of course not real gorilla glass apple wont pay for it, they steal the patent instead), and regular glass on the back. The back certainly breaks first when dropped.
rovex said:
but i will get a case.
Click to expand...
Click to collapse
Are you going to get the case from the link in the first post? The Streak is going to be a bit difficult to pocket with that case on don't you think? Unless it goes in a brief case or suit, two things which are rarely on me. Anyway, if you get the case could you please do a write up on it? I haven't gotten my Streak yet but am going to baby the thing as long as I can. I really do not want a scratch.
rovex said:
apple wont pay for it, they steal the patent instead
Click to expand...
Click to collapse
Wow, what a tool of a company. I heard they are currently sueing HTC on numerous so called 'stolen patenet' like finger swipe to unlock ect.
.
I dont know exactly what case ill get yet, im wait for a few more to appear.
Yes Apple are Suing HTC, and being sued back, but when Apple sues its usually on lame concepts rather than material objects. Apple are being sued now by Nokia, Kodak, HTC, Élan microcomputer systems, Cisco.. the list goes on..
Muo said:
..
Wow, what a tool of a company. I heard they are currently sueing HTC on numerous so called 'stolen patenet' like finger swipe to unlock ect.
.
Click to expand...
Click to collapse
and HTC are counter sueing Apple for stealing contacts management and some other stuff
badaas said:
and HTC are counter sueing Apple for stealing contacts management and some other stuff
Click to expand...
Click to collapse
Yes, thats purely a defensive action. Apple are the aggressors, but they are going down..

REVIEW: Realook 3D Form Screen Protector

What we dry screen protector users have been waiting for!!!!!!
All the Dry screen protectors until now have been cutting it short around the edges due to the
curved screen of the glass. NOT ANYMORE!!! LOL!
The Realooks 3D curve SP gets pretty darn close to the edges. Not so much that you can't use a case
The only cut outs are for the home button and speaker up top.
Take a look at the pictures below!!!!
I'm pretty damn satisfied with the product. T
I've been using the phone with the S-pen and haven't noticed much scratching at all.
Since the GN2 utilizes the s-pen, I don't like to use wet screen protectors as they leave marks.
The screen protector is optically clear and I didn't notice any rainbow effect.
Finger prints yes, but any clear SP will leave fingerprints. But easily wiped off.
The SP is up for pre-order and should be shipping out by this weekend.
I searched amazon and looks like pre-orders are going on now.
http://www.amazon.com/gp/product/B00B1UT84W
Looks good but the tech Armor sp I had also fit like these. As soon as I put on the diztronic tpu it peeled right up. Not case friendly.
Sent from my A500 using Tapatalk HD
I really really like this. Can't wait to see the reviews pour in.
Sent from my SPH-L900 using xda app-developers app
Whats the difference between that and this?
http://www.ebay.com/itm/REALOOK-Sam...046765?pt=PDA_Accessories&hash=item3a7bea296d
McLaren__F1 said:
Whats the difference between that and this?
http://www.ebay.com/itm/REALOOK-Sam...046765?pt=PDA_Accessories&hash=item3a7bea296d
Click to expand...
Click to collapse
For one thing it says : PLEASE NOTE: This is a PET material Crystal Clear screen protector that is designed to protect flat part of Galaxy Note 2 / II screen - smaller than entire screen.
So it doesn't cover your ENTIRE screen. Only a portion of it (the flat part).
While the 3D one in the OP states that it molds to the screen (+/-)
McLaren__F1 said:
Whats the difference between that and this?
http://www.ebay.com/itm/REALOOK-Sam...046765?pt=PDA_Accessories&hash=item3a7bea296d
Click to expand...
Click to collapse
The difference is that the curved 3d covers more of the screen. Closer to the edge of the screen.
I'll put up Better pictures soon.
Sent from my SGH-T889 using xda app-developers app
predation said:
What we dry screen protector users have been waiting for!!!!!!
All the Dry screen protectors until now have been cutting it short around the edges due to the
curved screen of the glass. NOT ANYMORE!!! LOL!
The Realooks 3D curve SP gets pretty darn close to the edges. Not so much that you can't use a case
The only cut outs are for the home button and speaker up top.
Take a look at the pictures below!!!!
I'm pretty damn satisfied with the product. T
I've been using the phone with the S-pen and haven't noticed much scratching at all.
Since the GN2 utilizes the s-pen, I don't like to use wet screen protectors as they leave marks.
The screen protector is optically clear and I didn't notice any rainbow effect.
Finger prints yes, but any clear SP will leave fingerprints. But easily wiped off.
The SP is up for pre-order and should be shipping out by this weekend.
I searched amazon and looks like pre-orders are going on now.
http://www.amazon.com/gp/product/B00B1UT84W
Click to expand...
Click to collapse
So this review is the exact same review on the Amazon site. You are the vendor, no? It sure looks that way by the review name used on Amazon. I don't mind a vendor hawking their wares on XDA, but I DO mind not saying as much in the post (making it look as though you are a regular user that is excited about the product or another satisfied user).
If I am wrong about you being affiliated with the company, please say so.
Looks nice. What is the hardness scale? Any proximity sensor issues since it covers them?
Sent from my SGNII
meatlocker said:
So this review is the exact same review on the Amazon site. You are the vendor, no? It sure looks that way by the review name used on Amazon. I don't mind a vendor hawking their wares on XDA, but I DO mind not saying as much in the post (making it look as though you are a regular user that is excited about the product or another satisfied user).
If I am wrong about you being affiliated with the company, please say so.
Click to expand...
Click to collapse
no i am not a vendor.
I am in no way making money off of this.
I do reviews and like any other reviewer and we get to a point that allows us to receive items beforehand.
I'm a total OCD gadget freak and if i get a product that I love, then i have no problem sharing with friends on XDA.
If i get a product that I don't like, then i'll share my feelings.
I've been really happy with this company. That is all. If i was the vendor, i would follow the rules on XDA regarding that.
I've been a member of xda with almost 500 posts since i got my galaxy nexus back when it first dropped internationally.
Anyways, I do understand your concern :good: . But back to the topic at hand!
i am also an AVID amazon shopper and i like to help people on Amazon as well... I got lazy and just copy and pasted..
I'm actually thinking of jumping in the pool with the other 90,384,579,034,857 of reviewers on youtube and creating my own channel.
But again, I'm not in anyway affiliated with the vendor nor do i make any money on these types of things.
as far as proximity sensors being affected, i have not noticed any proximity sensor issues.
when i go outside, screen brightens up. when i make a call and bring it up to my head, screen goes dark.
as far as hardness scale, i have no way of testing that. lol
crzycrkr said:
What is the hardness scale?
Click to expand...
Click to collapse
I guess this quote from the Amazon page may answer your question - The surface strength 3H coating will prevent everyday scratches to the LCD screen. I presume that refers to the hardness.
predation said:
no i am not a vendor.
I am in no way making money off of this.
I do reviews and like any other reviewer and we get to a point that allows us to receive items beforehand.
I'm a total OCD gadget freak and if i get a product that I love, then i have no problem sharing with friends on XDA.
If i get a product that I don't like, then i'll share my feelings.
I've been really happy with this company. That is all. If i was the vendor, i would follow the rules on XDA regarding that.
I've been a member of xda with almost 500 posts since i got my galaxy nexus back when it first dropped internationally.
Anyways, I do understand your concern :good: . But back to the topic at hand!
i am also an AVID amazon shopper and i like to help people on Amazon as well... I got lazy and just copy and pasted..
I'm actually thinking of jumping in the pool with the other 90,384,579,034,857 of reviewers on youtube and creating my own channel.
But again, I'm not in anyway affiliated with the vendor nor do i make any money on these types of things.
Click to expand...
Click to collapse
I appreciate the response, however I do note that you clearly have reviewed a number of this company's products on Amazon, and you are now offering this review of a product that hasn't even been released yet. So your relationship is one that allows you to get special perks, such as free stuff to review. I don't mean to beat a dead horse, but you have incentive to give a positive review through this relationship, and therefore, it is biased.
I prefer unbiased reviews myself.
Understand your concerns.
Everyone enitled to their opinions.
Sent from my SGH-T889 using xda app-developers app
meatlocker said:
I appreciate the response, however I do note that you clearly have reviewed a number of this company's products on Amazon, and you are now offering this review of a product that hasn't even been released yet. So your relationship is one that allows you to get special perks, such as free stuff to review. I don't mean to beat a dead horse, but you have incentive to give a positive review through this relationship, and therefore, it is biased.
I prefer unbiased reviews myself.
Click to expand...
Click to collapse
predation said:
Understand your concerns.
Everyone enitled to their opinions.
Click to expand...
Click to collapse
Biased or not, any viewpoint may be better than no viewpoint.
I'll give this one a shot when it comes out. I wasn't a glass protector, but been reading sometimes the adhesive makes them impossible to remove without lifting the screen. I love the feel of my SGP, but hate how small it is compared to the screen
Sent from my SGNII
I'll probably buy this. I've used Realook in the past on various phones and I've been very happy with the results. My last phone had the same one on it for over 2 years, and it looked absolutely gorgeous like the first day I put it on.
Spigen for me. I'm not sure if I like the protector covering the sensors/camera, case curling it, etc.
Just my thoughts.
jyokota said:
Spigen for me. I'm not sure if I like the protector covering the sensors/camera, case curling it, etc.
Just my thoughts.
Click to expand...
Click to collapse
hopefully someone who gets the SP and uses a case can chime in.
i have a case at home, but ever since i put a skin on my phone, can't use a case.
Rocking it NEKKED! well sort of. lol
meatlocker said:
I appreciate the response, however I do note that you clearly have reviewed a number of this company's products on Amazon, and you are now offering this review of a product that hasn't even been released yet. So your relationship is one that allows you to get special perks, such as free stuff to review. I don't mean to beat a dead horse, but you have incentive to give a positive review through this relationship, and therefore, it is biased.
I prefer unbiased reviews myself.
Click to expand...
Click to collapse
For god's sake it's a screen protector. Relax.
mitchellvii said:
For god's sake it's a screen protector. Relax.
Click to expand...
Click to collapse
Thoughtful and well-reasoned. LOL.
updated with more pics. took them with a better camera this time.

Replacement back for Mix?

Hi All,
Has anyone been able to track down somewhere that is selling a replacement back for the Mix? Mine is scratched quite heavily (likely from using a fairly tight sleeve) and I would really like to replace it....Or for any poor soul out there who has damaged their Mix and would like to sell the back. The irony is the sides of the phone are pristine and not a scratch, not so much on the back.
Thanks in advance
imapfsr said:
Hi All,
Has anyone been able to track down somewhere that is selling a replacement back for the Mix? Mine is scratched quite heavily (likely from using a fairly tight sleeve) and I would really like to replace it....Or for any poor soul out there who has damaged their Mix and would like to sell the back. The irony is the sides of the phone are pristine and not a scratch, not so much on the back.
Thanks in advance
Click to expand...
Click to collapse
And here's me thinking it was virtually impossible to scratch.
jazz452 said:
And here's me thinking it was virtually impossible to scratch.
Click to expand...
Click to collapse
You are wrong.It is made in China.Enough said.Looks good but who cares about quailty.It is NOT CERAMIC but made to looks like it.
I had it and my suggestion is save money for Galaxy S8+ or something more valuable.
I had to take the pictures with my Galaxy tablet so not the best quality but you get the picture. This is with normal day to day use as well, nothing extreme. I even had the Best Buy film on the back for a few months but got tired of the sharp edges from the film every time i unlocked with the finger print sensor. I am wondering if the chemicals from the glue combined with peeling of the film stripped some of the finish somehow as this is supposed to be so scratch resistant. Maybe just one with a faulty finish.
imapfsr said:
I had to take the pictures with my Galaxy tablet so not the best quality but you get the picture. This is with normal day to day use as well, nothing extreme. I even had the Best Buy film on the back for a few months but got tired of the sharp edges from the film every time i unlocked with the finger print sensor. I am wondering if the chemicals from the glue combined with peeling of the film stripped some of the finish somehow as this is supposed to be so scratch resistant. Maybe just one with a faulty finish.
Click to expand...
Click to collapse
So the YouTube video is fake or is it your phone, it's been tested against scratches with a hardness of 7, second to none, don't get it. Not one other person complaining I dropped mine when it slipped off a table on it's own while i was in another room,, expecting the worse but not even a mark.
jazz452 said:
So the YouTube video is fake or is it your phone, it's been tested against scratches with a hardness of 7, second to none, don't get it. Not one other person complaining I dropped mine when it slipped off a table on it's own while i was in another room,, expecting the worse but not even a mark.
Click to expand...
Click to collapse
Sorry, I am not sure what your point is. I am certainly not making it up as per the pictures. I was only asking if anyone had seen the replacement backs anywhere. I absolutely love his phone but have been disappointed how much is has scratched on the back, not questioning the online videos etc.
By the way, what was the purpose of your post? If you have nothing to contribute to solving the question at hand why say anything?
imapfsr said:
Sorry, I am not sure what your point is. I am certainly not making it up as per the pictures. I was only asking if anyone had seen the replacement backs anywhere. I absolutely love his phone but have been disappointed how much is has scratched on the back, not questioning the online videos etc.
By the way, what was the purpose of your post? If you have nothing to contribute to solving the question at hand why say anything?
Click to expand...
Click to collapse
Suppose my point was because of shortage of the ceramic maybe they sent some out with different materials.
Mine is just fine after a while of use, both in and out of a protective case, side note mine also doesn't have the "cottage" cheese looking blemishes yours seems to have in the pictures. Its possible to have received a "repaired" one instead of a legit one ... especially if it came from a reseller. There are mentions of this on the xiaomi reddit and other places. its extremely scratch resistant, as much so as any Samsung or other device out there that I have dealt with [and I do service work on phones so I have seen plenty of damaged devices - HUGE number of sub standard Samsung's btw - for the value guy ]
Good luck on finding a part supplier, you MAY find one on Aliexpress ... but there more than likely not going to be genuine parts. Vopmart.com
Thanks to everyone for their feedback. I hope I didnt get a refurb etc, that would suck.
imapfsr said:
Thanks to everyone for their feedback. I hope I didnt get a refurb etc, that would suck.
Click to expand...
Click to collapse
Had a look about couldn't see any anywhere, don't know what the solution is, hope you come up with something.
Nicolfa said:
Mine is just fine after a while of use, both in and out of a protective case, side note mine also doesn't have the "cottage" cheese looking blemishes yours seems to have in the pictures.
Click to expand...
Click to collapse
I think that is a reflection of the popcorn finish from the roof in my bedroom
imapfsr said:
I think that is a reflection of the popcorn finish from the roof in my bedroom
Click to expand...
Click to collapse
Could you not sell your house buy another and take fresh picture to rule that out
I'm on it! ?
Lol is possible . I also hope you didn't get a refurbished​ one.
jazz452 said:
Suppose my point was because of shortage of the ceramic maybe they sent some out with different materials.
Click to expand...
Click to collapse
It's not the point of this discussion but I also have tiny scratches beside the lenses​ and fingerprint...
It's not unscratchable...
Nothing is unscratchable :_)

screen protector in a bottle

I just did a video review of liquid screen protectors.
No you didn't. A review would have actually used the product and presented some sort of conclusion on it's value or utility.
I'm not a physicist, but I have my doubts that this kind of product can provide any impact protection. Possibly it can help protect the glass from scratches as a sacrificial layer, but in order to provide long-term benefits there needs to be a way to remove and reapply the coating when scratches or scuffs occur, and I see nothing to explain how this can be done.
bumpintheroad said:
No you didn't. A review would have actually used the product and presented some sort of conclusion on it's value or utility.
I'm not a physicist, but I have my doubts that this kind of product can provide any impact protection. Possibly it can help protect the glass from scratches as a sacrificial layer, but in order to provide long-term benefits there needs to be a way to remove and reapply the coating when scratches or scuffs occur, and I see nothing to explain how this can be done.
Click to expand...
Click to collapse
My thoughts exactly. This stuff actually function like a ceramic coating that's used in vehicle paint (I'm a pro detailer). That's exactly what we call those coatings, "a sacrificial layer." Vehicle speaking, a rock could hit the paint coating and not damage the paint but the impact could still leave a dent or slight impression in the metal. This screen coating will probably be good to protect against minor scratching but the right impact could still break the screen.
It's tough it here. We spend all these hard earned dollars (it whatever for various countries) for the devices and expect superior protecting for them. I just don't think it exists yet.
Here's to being careful. Cheers!
Sent from my SM-N950U using Tapatalk
Howard the Magic Tech Guy?!? Well he sure did a neat vanishing trick from this thread lol
Sorry, I really should not laugh but come on!
chippyuk said:
Howard the Magic Tech Guy?!? Well he sure did a neat vanishing trick from this thread lol
Sorry, I really should not laugh but come on!
Click to expand...
Click to collapse
I'm back... Firstly, I did put it on my old note 4 and it did not work at all.. But I no longer have that note 4... Like all of us we are all looking for the perfect screen protector and as I said in my review I didn't know if it worked. Sorry guys, not I don't have the resources to scratch test the phone at a 1000 per pop.
But I witnessed 1000s of people having this type of liquid on their phones at $30 a go.. My objective was at least to let potential customers do more research.. And as I mentioned on other forums the claims are a complete mixed bag some say they have fine scratches some don't even on amazon ... I just don't know... Maybe one of you can do a scientific scratch test.
Is it bird poo stain proof?
Sent from my SM-N950U using Tapatalk
Reminds me of products like spray on hair or spray on grip tape for skateboards. Lol
shouren04 said:
Reminds me of products like spray on hair or spray on grip tape for skateboards. Lol
Click to expand...
Click to collapse
I remember that spray on grip tape... It sucked wasn't worth the can it was in:good::good::good:
I have wondered what people think of these chemical type liquid applications The cricket store here tries to get me to 40$ a pop and guaranties my screen not to break or they will replace it....
Im like yea noooo....
Im sure it will still break and Im sure when the time comes you will hassle me on whatever guaranty you have made
magichoward said:
I'm back... Firstly, I did put it on my old note 4 and it did not work at all.. But I no longer have that note 4... Like all of us we are all looking for the perfect screen protector and as I said in my review I didn't know if it worked. Sorry guys, not I don't have the resources to scratch test the phone at a 1000 per pop.
But I witnessed 1000s of people having this type of liquid on their phones at $30 a go.. My objective was at least to let potential customers do more research.. And as I mentioned on other forums the claims are a complete mixed bag some say they have fine scratches some don't even on amazon ... I just don't know... Maybe one of you can do a scientific scratch test.
Click to expand...
Click to collapse
Not on a nearly 300$ plus screen no scratch tests for me
TheMadScientist said:
I remember that spray on grip tape... It sucked wasn't worth the can it was in:good::good::good:
I have wondered what people think of these chemical type liquid applications The cricket store here tries to get me to 40$ a pop and guaranties my screen not to break or they will replace it....
Im like yea noooo....
Im sure it will still break and Im sure when the time comes you will hassle me on whatever guaranty you have made
Click to expand...
Click to collapse
Yup I hear ya, I rather go with a cheap plain ol PET screen protector anyday over gimmics like this one posted. What a joke. Actually that's what I'm using on my Note 8, no fancy glass screen protector due to the curved screen & case compatibility.

Question Pixel 5a coating worn out. Google refused replacement.

Only used it for a couple of days. The coating on the right side is already worn out. There is no damage at all (any kinds).
I have contacted Google though Chat on the website. I was told "this is cosmetic damage, it shouldn't affect the device functionality". They will not issue a replacement.
This is probably my last Google purchase for a while. Do your Pixel 5as have the similar problem?
due to the nature of the covering it is susceptible to discoloration. try cleaning it with a quality cleaning agent on a soft cloth. a mild bleach water solution, or something similar.
Zedicus said:
due to the nature of the covering it is susceptible to discoloration. try cleaning it with a quality cleaning agent on a soft cloth. a mild bleach water solution, or something similar.
Click to expand...
Click to collapse
I tried to clean it.
It seems to be a common issue.
https://www.reddit.com/r/GooglePixel/comments/peq1j6
jlduan said:
I tried to clean it.
It seems to be a common issue.
https://www.reddit.com/r/GooglePixel/comments/peq1j6
Click to expand...
Click to collapse
it is and will continue to be. put a case on it or get used to it.
Zedicus said:
it is and will continue to be. put a case on it or get used to it.
Click to expand...
Click to collapse
I don't know whether it would deteriorate or not.
If we all choose to be 'nice' customers to big corporations, they may never improve their QC or manufacturing, don’t you think?
When I wet my phone with 75% rubbing alcohol to clean it I can definitely see the grips from the machine that was holding the case to transport it through the coating solution. Pictures below. There are some circles and straight lines, which to me look like marks from the gripper. They are not visible when the case is dry.
There are two areas on mine that are somewhat shiny and look like grease. I tried to return it but was told I can only get a refurbished phone. The other option is to return it entirely and order a new one. However, I found out that they charge you a $30 restocking fee.
For now I can live with it. It's definitely a manufacturing issue with their coating process that leaves us customers unsatisfied. I think the coating is fine, it's just not uniform.
jlduan, if you look at the second image you can see the same lines you observe, even with it's double line.
In summary, I believe this has more to do with the coating process than the battery.
cheers
derausgewanderte said:
When I wet my phone with 75% rubbing alcohol to clean it I can definitely see the grips from the machine that was holding the case to transport it through the coating solution. Pictures below. There are some circles and straight lines, which to me look like marks from the gripper. They are not visible when the case is dry.
There are two areas on mine that are somewhat shiny and look like grease. I tried to return it but was told I can only get a refurbished phone. The other option is to return it entirely and order a new one. However, I found out that they charge you a $30 restocking fee.
For now I can live with it.
In summary, I believe this has more to do with the coating process than the battery.
cheersView attachment 5408923View attachment 5408925View attachment 5408929
Click to expand...
Click to collapse
Thanks for the photos. I just wiped mine with water. I don't have those circles. I really hope it is just the coating, not some consistent heat distribution problem.
jlduan said:
Thanks for the photos. I just wiped mine with water. I don't have those circles. I really hope it is just the coating, not some consistent heat distribution problem.
Click to expand...
Click to collapse
yeah, even in yours you can tell it's the coating. Wetting is affected by the direction and the very coating roughness.
You do have one of the circles though towards the left of your fingerprint reader.
cheers
PS: seeing that the battery cover is available for the Pixel 5 (https://www.ebay.com/itm/1541683815...1291&msclkid=f3019a2da8fd19bc6aedfb1235325eb1), there will likely be some available for the 5a in the future to change it or even to change the color. I like to tinker...
PSS: actually aliexpress already has it
https://www.aliexpress.com/item/1005003282679401.html?spm=a2g0o.productlist.0.0.60235233Kmb7KF&algo_pvid=d675d96e-627a-4515-8f1e-d1910e22a881&algo_exp_id=d675d96e-627a-4515-8f1e-d1910e22a881-0&pdp_ext_f=%7B%22sku_id%22%3A%2212000025009231411%22%7D
derausgewanderte said:
yeah, even in yours you can tell it's the coating. Wetting is affected by the direction and the very coating roughness.
You do have one of the circles though towards the left of your fingerprint reader.
cheers
PS: seeing that the battery cover is available for the Pixel 5 (https://www.ebay.com/itm/1541683815...1291&msclkid=f3019a2da8fd19bc6aedfb1235325eb1), there will likely be some available for the 5a in the future to change it or even to change the color. I like to tinker...
PSS: actually aliexpress already has it
https://www.aliexpress.com/item/1005003282679401.html?spm=a2g0o.productlist.0.0.60235233Kmb7KF&algo_pvid=d675d96e-627a-4515-8f1e-d1910e22a881&algo_exp_id=d675d96e-627a-4515-8f1e-d1910e22a881-0&pdp_ext_f=%7B%22sku_id%22%3A%2212000025009231411%22%7D
Click to expand...
Click to collapse
If you don't mind ruining your waterproof rating, I guess this works as a potential solution. I'm not sure what coating is being discussed in this thread, but if they apply some chemical (maybe oleophobic coating) then you're not going to have that on a replacement back.
derausgewanderte said:
yeah, even in yours you can tell it's the coating. Wetting is affected by the direction and the very coating roughness.
You do have one of the circles though towards the left of your fingerprint reader.
cheers
PS: seeing that the battery cover is available for the Pixel 5 (https://www.ebay.com/itm/1541683815...1291&msclkid=f3019a2da8fd19bc6aedfb1235325eb1), there will likely be some available for the 5a in the future to change it or even to change the color. I like to tinker...
PSS: actually aliexpress already has it
https://www.aliexpress.com/item/1005003282679401.html?spm=a2g0o.productlist.0.0.60235233Kmb7KF&algo_pvid=d675d96e-627a-4515-8f1e-d1910e22a881&algo_exp_id=d675d96e-627a-4515-8f1e-d1910e22a881-0&pdp_ext_f=%7B%22sku_id%22%3A%2212000025009231411%22%7D
Click to expand...
Click to collapse
Thanks for these links.
It is nice to know there are already replacement battery cover ready! It will be my last resort. Right now, water resistant is kinda more important
luciferin said:
If you don't mind ruining your waterproof rating, I guess this works as a potential solution. I'm not sure what coating is being discussed in this thread, but if they apply some chemical (maybe oleophobic coating) then you're not going to have that on a replacement back.
Click to expand...
Click to collapse
of course that will go out the window. The coating is a thin polymeric coat on top of aluminum.
Not to be rude, but this seems like a petty complaint. You really should get a case anyway. Problem solved.
edufur said:
Not to be rude, but this seems like a petty complaint. You really should get a case anyway. Problem solved.
Click to expand...
Click to collapse
A $450 device shouldn't be discoloring itself in less than a month of use.
I remember $400 on a Nexus 5 for my wife back in 2013 and I was impressed with what I got for the price. Back then, flagship phones didn't really exist like they do now. People need to realize manufacturers are going to cut corners to keep prices down with what average person can actually afford. Considering the $450 I spent on my Pixel 5a I am extremely impressed with the build quality. Even still, a Spigen case was ordered and put on the phone immediately after I removed it from the box. Anyone that wants a pretty phone with glass or aluminum to show off without using a protective case should probably buy another phone? I bought the 5a mainly for the software experience.
Mine has the same color issue I noticed it the first day in sun. I'm have a black moss google case due any day now. I was wondering if it was just my pixel changing color. I wiped it off and it disappears for a bit then comes back. I'm not sure why they are that way.
Will this phone has coating chipped out like Pixel 5 ?
(not my photo.)
I think the coating on the 5a is a new process not done on prior Pixels as far as I understand. You might still get scratches, but I don't think it will flake off like in the picture. It's very thin polymer coat fused with the Aluminum.
jlduan said:
Only used it for a couple of days. The coating on the right side is already worn out. There is no damage at all (any kinds).
I have contacted Google though Chat on the website. I was told "this is cosmetic damage, it shouldn't affect the device functionality". They will not issue a replacement.
This is probably my last Google purchase for a while. Do your Pixel 5as have the similar problem?
Click to expand...
Click to collapse
The device has a plastic-coated back. This is not a flagship glass back or aluminum/metal phone. Yes, plastic, even plastic coatings, will show wear, it will scratch. You bought a budget device, this is one of the drawbacks you have to live with. I'd go even as far as to say be happy it is actually an aluminum back with a plastic coating instead of straight up plastic. Putting it in your pocket will show wear on plastic just from the friction of sliding it in and out of your pocket.
liberatorx3 said:
A $450 device shouldn't be discoloring itself in less than a month of use.
Click to expand...
Click to collapse
These days a $450 device is a budget to midrange phone. Your comment makes it seem like it is a $1k flagship which needs to have zero imperfections.
undivide said:
I remember $400 on a Nexus 5 for my wife back in 2013 and I was impressed with what I got for the price. Back then, flagship phones didn't really exist like they do now. People need to realize manufacturers are going to cut corners to keep prices down with what average person can actually afford. Considering the $450 I spent on my Pixel 5a I am extremely impressed with the build quality. Even still, a Spigen case was ordered and put on the phone immediately after I removed it from the box. Anyone that wants a pretty phone with glass or aluminum to show off without using a protective case should probably buy another phone? I bought the 5a mainly for the software experience.
Click to expand...
Click to collapse
The Nexus 5 was a plastic back phone. I still have one in a drawer somewhere. This one has an aluminum back with plastic coating. I would say the Pixel 5A is just as good of a deal if not better. Especially if you account for inflation. As for flagships, yes they were definitely a thing then. That was exactly the time the flagship killer came out, the OnePlus One. It was marketed as the flagship killer. And... For $350 it was plastic backed and had zero water resistance.... Just like the Nexus 5. Lets not forget that both of these devices did not even have stereo speakers.
I don't want to defend Google, a giant, super rich corporation, but come on people, have some common sense. This isn't a Pixel 6. You bought it because it was relatively cheap for decent hardware and great software support. The back is plastic coated, that will wear of super duper easy no matter what and that should have been super obvious. Get a case. Stop caring about superficial imperfections and enjoy your phone for what it is, a good, affordable phone with good specs and great software.
Cheesethief, this is not wear though. It's a manufacturing inconsistency. I get your point.
derausgewanderte said:
Cheesethief, this is not wear though. It's a manufacturing inconsistency. I get your point.
Click to expand...
Click to collapse
It was more in reply to the OP who said his issue appeared after a few days of use. A few days is all it takes for plastic I see your point about manufacturing defects/inconsistencies too though.

Categories

Resources