Database Develop

[KERNEL] DookMatt 2.2.2 kernel with optimized OC and LG Lagfix

This is my kernel based on 2.2.2 kernel released by LG! This kernel has LG touchscreen fix and I've added OC from HERE, ext4 and btrfs support (btrfs is experimental) and VPN support (tun.ko module).
If you would like to use this kernel: http://www.multiupload.com/H3HQT7WMSY
Do not forget to make nandroid backup first.
Packaged in koush's anykernel for compatibility with any rom.
PS: Thanks to Mik_os for his patience
PPS: With my kernel I managed to use 806Mhz and it's works very well and it's stable for my phone.

Could you define optimised OC? How is it different from the OC supported by other kernels.
Thanks.
Sent from my LG-P500 using XDA App

socialdistortion said:
Could you define optimised OC? How is it different from the OC supported by other kernels.
Thanks.
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
I used a new patch and this one, modify only 2 kernel files!

I can go up to 806MHz, which is really the top frequency my phone can handle. And amazingly enough, the cpu spike isn't there What changes did you make?

Work like a charm, but lack insteractive mode in setcpu and when you put it in power mode it stay at max freq. Thanks for your work buddy.

hope you include this on your next ROM release.... more power to you sir!

Dook - is it the same updated OC code that Mik used in his latest 2 builds ?

bluviper said:
hope you include this on your next ROM release.... more power to you sir!
Click to expand...
Click to collapse
#fenice mount this kernel!
Zerobarat1 said:
Dook - is it the same updated OC code that Mik used in his latest 2 builds ?
Click to expand...
Click to collapse
Oh yes!

Can not be used in the ROM 2.3.3 Mik_os?

segyto said:
Can not be used in the ROM 2.3.3 Mik_os?
Click to expand...
Click to collapse
Arrrrgh this does not contain any of the patches needed by Gingerbread to function at least remotely fine .

Tried this kernel with LOLv1.2(froyo2.2) ROM,,Doesnt even stand up to SIppolo's super optimised kernel..After flashing this rom,phone got a little slower but like u said no more cpu spikes !!! THnx for posting

With my kernel I managed to use 806Mhz and it's works very well and it's stable for my phone.

so this actually worked? would flash and and test it on some games. and would post my feedback after. Thnx!

peacekeeper05 said:
so this actually worked? would flash and and test it on some games. and would post my feedback after. Thnx!
Click to expand...
Click to collapse
Anyway, i prefer use my phone at 729MHz or 768MHz!

yep.
confirmed, cpu spike is not there.
thanks!

Can you define which is the LG touch fix? I thought that LG never released a fix for the touch bug...

yelo3 said:
Can you define which is the LG touch fix? I thought that LG never released a fix for the touch bug...
Click to expand...
Click to collapse
in 2.2.2 v10R kernel LG released a fix for the touch bug!

sarfaraz1989 said:
Tried this kernel with LOLv1.2(froyo2.2) ROM,,Doesnt even stand up to SIppolo's super optimised kernel..After flashing this rom,phone got a little slower but like u said no more cpu spikes !!! THnx for posting
Click to expand...
Click to collapse
can anyone confirm this?
is it just for 2.2 or is 2.2.2 affected?

Can I flash this kernel into my AmberHome ROM (2.2)?

it has so small transitions in speed like from 600Mhz u cud scale upto 645Mhz..I like this
EDIT: yes u can check it out on any rom..It will work on any rom as it is packages like koush's style

[Q] what is the fastest ?

am just asking for the fastest & stable ... dont give me an answer that tells you have to try & what am i looking for bla bla bla
what is the fastest stable rom ?
Kernel ?
I/O Scheduler ?
Governor ?
Voltage ?
any other setting or apps that will help ?
PLZ PLZ
just give me the fastest & stable no need to tell me more ... simple & thakns

Recommend. Miui!!!!! ( made in China )

jaln1987 said:
Recommend. Miui!!!!! ( made in China )
Click to expand...
Click to collapse
whats that got to do with my question ?

Slim 3.6
Semaphore 1.1.1sbm
smartass v2/sio
LMK 75mb
sd card cache 1024mb
network tweak
chainfire sensitivity
deep idle ON
remove unwanted apps
Option to OC (i use 1.1ghz) but its not really needed
Sent using TCP/IP

gsw5700 said:
Slim 3.6
Semaphore 1.1.1sbm
smartass v2/sio
LMK 75mb
sd card cache 1024mb
network tweak
chainfire sensitivity
deep idle ON
remove unwanted apps
Option to OC (i use 1.1ghz) but its not really needed
Sent using TCP/IP
Click to expand...
Click to collapse
keep on restarting & force closing
although i wipe everything before installing ..... ???
any idea ?
& i cant find SIO ... only noop & deadline & simple I/O
same is for the LMK

gsw5700 said:
Slim 3.6
Semaphore 1.1.1sbm
smartass v2/sio
LMK 75mb
sd card cache 1024mb
network tweak
chainfire sensitivity
deep idle ON
remove unwanted apps
Option to OC (i use 1.1ghz) but its not really needed
Sent using TCP/IP
Click to expand...
Click to collapse
aha ok i see
i did them all but still no sio ... installed scripts but no sio
should i uninstall the original script ?

Not sure but i remember something about lmk causing issues. Could be wrong but maybe try that on default.
I'm running slim ics 3.6, semaphore 1.1.1sbm but with everything default and am happy. Been using semaphore/slim ics combo for a month or so with no force closes at all.
Sent from my GT-P7500 using Tapatalk 2

You know, that question is a bit like asking "what is the healthiest dinner?" and expect to get to same answer from everyone.
Different roms are more stable for certain usage. That said, AOKP roms are most stable for me, I've had no issues at all on infinitum.
Non ics roms would be Darky 9.5, rock solid with working call recording. This is pretty widely recognized as a very stable rom.
Sent from my GT-I9000 using Tapatalk 2

asoom69 said:
aha ok i see
i did them all but still no sio ... installed scripts but no sio
should i uninstall the original script ?
Click to expand...
Click to collapse
you set smartass and sio using semaphore app. set min memory using ASS app from settings.
Sent using TCP/IP

I am using the Doc's Master Rom V11. So far I have no major problem. Only 1 issue, It always prompted me that i have Low On Space where in fact. I still have 1GB of phone memory..

adytum said:
You know, that question is a bit like asking "what is the healthiest dinner?" and expect to get to same answer from everyone.
Different roms are more stable for certain usage. That said, AOKP roms are most stable for me, I've had no issues at all on infinitum.
Non ics roms would be Darky 9.5, rock solid with working call recording. This is pretty widely recognized as a very stable rom.
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
infinitum is great but in some games & apps its slow
thats why am looking for a very fast rom & kernel >>>>>

gsw5700 said:
you set smartass and sio using semaphore app. set min memory using ASS app from settings.
Sent using TCP/IP
Click to expand...
Click to collapse
i set it to smartass but still no sio ... not a big deal ok ...
but all these is from smerphone app ... when you go to nstools there is much less option & the highest cpu is 1000mhz
mean while in smerphone you can get it up to 1300 mhz but as soon you leave the apps it goes back to 1000 ... but every other setting stay as i choose ... & when you try to make the profile default as your profile the phone completely shut down
so i did as most of people think which is the fastest ... but still 2 things i cant do
sio
highest cpu ( 1300 ) am stuck with (1000 )

scubadude said:
Not sure but i remember something about lmk causing issues. Could be wrong but maybe try that on default.
I'm running slim ics 3.6, semaphore 1.1.1sbm but with everything default and am happy. Been using semaphore/slim ics combo for a month or so with no force closes at all.
Sent from my GT-P7500 using Tapatalk 2
Click to expand...
Click to collapse
i didnt say it was from lmk ... i was saying i didnt find lmk ... after i install the extra scripts i find it

Calient_Boy said:
I am using the Doc's Master Rom V11. So far I have no major problem. Only 1 issue, It always prompted me that i have Low On Space where in fact. I still have 1GB of phone memory..
Click to expand...
Click to collapse
i am on same rom and it never gives that issue, you may try low space warning msg fix.
Sent using i9000 running Doc's Master 4.0.4

asoom69 said:
i didnt say it was from lmk ... i was saying i didnt find lmk ... after i install the extra scripts i find it
Click to expand...
Click to collapse
goto ass>performance>free memory> you can use it as lmk
Sent using i9000 running Doc's Master 4.0.4

[Q] Sleep of dead on CM 7.2.0 stable

my P990 with MIUI 2.4.13 with out any problem. When I flash the CM 7.2.0 stable (wiped data and cache), everything is good and very fast ( i really love the speed of CM ), it can't wakeup..........
Sorry for my bad English and could anyone please tell me what problem and how to solve? Many Thanks.

manshum said:
my P990 with MIUI 2.4.13 with out any problem. When I flash the CM 7.2.0 stable (wiped data and cache), everything is good and very fast ( i really love the speed of CM ), it can't wakeup..........
Sorry for my bad English and could anyone please tell me what problem and how to solve? Many Thanks.
Click to expand...
Click to collapse
In cm settings - performance raise the min frequency from 216 to 316 or 324 mhz.
Maybe this will help you.
Sent from my LG-P990 using XDA

Well if you are using the oficial CM7.2 Stable, unfortunatly you cannot edit the CPU governors nor u can OC/UV.
Maybe reinstall the CM7.2 Stable with full wipe (dalvik included) don't forget BACKUP before anything else

I.m.Tuga said:
Well if you are using the oficial CM7.2 Stable, unfortunatly you cannot edit the CPU governors nor u can OC/UV.
Maybe reinstall the CM7.2 Stable with full wipe (dalvik included) don't forget BACKUP before anything else
Click to expand...
Click to collapse
im using cm 7.2 stable and i was able to change the min frequency to 300 mhz using antutu cpu master

lopiop said:
im using cm 7.2 stable and i was able to change the min frequency to 300 mhz using antutu cpu master
Click to expand...
Click to collapse
Indeed you are right! didn't thought about Antutu!!
Neither way i would try to reflash....
that issue is not normal, if you like good batery performances like me than increasing minimum CPU frequencys is not the way to go....just sayin'

thx for all reply
I try a full wipe with wipe dalvik, reflash the cm and set the min cpu speed to 456 but no luck... my P990 still sleep of dead...

manshum said:
thx for all reply
I try a full wipe with wipe dalvik, reflash the cm and set the min cpu speed to 456 but no luck... my P990 still sleep of dead...
Click to expand...
Click to collapse
i suggest u send ur phone to lg if its still in warranty or maybe go back to stock rom

same here
i had this too. but only one time and without doing anything it is gone

I.m.Tuga said:
Well if you are using the oficial CM7.2 Stable, unfortunatly you cannot edit the CPU governors nor u can OC/UV.
Maybe reinstall the CM7.2 Stable with full wipe (dalvik included) don't forget BACKUP before anything else
Click to expand...
Click to collapse
I'm not using cm7 anymore but are you sure?
If I remember correctly then it was possible to raise values. It's just not possible to overclock with the default kernel.
@op: try the Etana 2.6 kernel from vadonka. Maybe it will work better on your phone, worth a try.
If it's still problematic you could try to give each mhz step +25mV.
Sent from my LG-P990 using XDA

I can't find the old ETaNa 2.6 kernel so I flash the latest ETaNa v3.0.35 OTF-OC-1504MHz kernel with CM7.2 but my P990 still sleep of dead.
after the try of flash CM7.2, I try to flash the MIUI 2.4.6 (kernel 2.6.32-45), it work and no sleep of dead and than I flash the ETaNa v.3.0.35 kernel, it sleep of dead again......
anyway, Many Thanks of all help on me. I think my P990 need to stick on MIUI and wait for CM9 with video acceleration ( i need PPSteam )
updated: I flashed this two rom "[ROM] Rebuild of V20S Gingerbread Update + Tweak Pack V1.1" (kernel 2.6.32) and "[ROM][CM9][JUN14-Build78] Dominationand", the P990 sleep of dead, only MIUI not sleep of dead on my device.... what MIUI do something on my P990?.... so funny...

manshum said:
I can't find the old ETaNa 2.6 kernel so I flash the latest ETaNa v3.0.35 OTF-OC-1504MHz kernel with CM7.2 but my P990 still sleep of dead.
after the try of flash CM7.2, I try to flash the MIUI 2.4.6 (kernel 2.6.32-45), it work and no sleep of dead and than I flash the ETaNa v.3.0.35 kernel, it sleep of dead again......
anyway, Many Thanks of all help on me. I think my P990 need to stick on MIUI and wait for CM9 with video acceleration ( i need PPSteam )
updated: I flashed this two rom "[ROM] Rebuild of V20S Gingerbread Update + Tweak Pack V1.1" (kernel 2.6.32) and "[ROM][CM9][JUN14-Build78] Dominationand", the P990 sleep of dead, only MIUI not sleep of dead on my device.... what MIUI do something on my P990?.... so funny...
Click to expand...
Click to collapse
It's here: http://etana.donka.hu/?dir=kernel/2.6.32.y
Vadonka has the 2.6 kernel in the third post of his thread.
I would recommend the 1204021107-ETaNa_LOC_LITE_OTF.zip one.
As I said a +25mV could help you, if the bsods are voltage related.

i flash the 1204021107-ETaNa_LOC_LITE_OTF.zip and try to add the voltage but the antutu just let me -25mV ( can't +25mV)... anyway, same result, my P990 still sleep of dead :silly:
after clean install the MIUI, it run so fast, so i will stik with MIUI and wait the official LG android 4.0 release ( maybe next next next ... years )
Many Thanks

manshum said:
i flash the 1204021107-ETaNa_LOC_LITE_OTF.zip and try to add the voltage but the antutu just let me -25mV ( can't +25mV)... anyway, same result, my P990 still sleep of dead :silly:
after clean install the MIUI, it run so fast, so i will stik with MIUI and wait the official LG android 4.0 release ( maybe next next next ... years )
Many Thanks
Click to expand...
Click to collapse
System Tuner from the market can +mV
Sent from my LG-P990 using XDA

I try to flash the V20F KDZ and the P990 still sleep of dead...
finally, i take my P990 to LG service center and the engineer replace the main board ( the phone warranty will expire on 17 July, very lucky )
now the P990 with V20F stock rom so far so good
Many Thanks again for all

[KERNEL] vta2-kernel for Nexus S Jelly Bean #130

I built this kernel for my daily use, now i decided to share it here!
Work with Nexus World Wide Version (i9023/i9020t).
※ Basically it is made for Official Stock ROM (JRO03E/JZO54K). it may NOT work with other ROMs.
Not working with CyanogenMod!
Main features of this kernel:
1.25GHz
Based on Linux Kernel 3.0.73
Based on AOSP
Touchwake ADVANCED (allowing you wake up your phone by touching screen when you got a notification ) (based on Ezekeel's work)
10-point multitouch
Force AC charging by chad0989
UKSM (Ultra Kernel Samepage Merging)
MTP (thanks to bedalus and Krarvind!)
High Bigmem
BLN by Ezekeel
BLD by Ezekeel
Powerkey Presses Counter
init.d support
Optimized CRC32 algorithm
SLUB
Custom Voltage by Ezekeel
mount dalvik-cache to /cache
undervolted
RCU Boost
Voodoo by supercurio
included busybox
USB OTG v5 by sztupy Read this. (not sure if this work on Jelly Bean)
CRT-off animation fix from CyanogenMod team.
PM_FAST
...
Default: interactive / sio
Thanks to all contributors of this kernel!
And welcome to fork it on my github.
Download vta2-kernel / Changelog
TODO:
Bluetooth battery drain fix.
ROW I/O scheduler ( kernel module )
...
Any Suggestion? Tell me here

hi crt is fix ?

leap_ahead said:
hi crt is fix ?
Click to expand...
Click to collapse
yes.

Thanks for the share.. works great.

krfoy said:
I built this kernel for my daily use, now i decided to share it here!
Tested on my Nexus S i9023 and it should also works on i9020.
Main features of this kernel:
1.24GHz
Based on Linux Kernel 3.0.38
Based on AOSP
for Nexus S JRO03E stock ROM
Bigmem
Touchwake
BLN
BLD
init.d support
Optimized CRC32 algorithm
SLUB
Custom Voltage
mount dalvik-cache to /cache
undervolt
Deep Idle
RCU Boost
Voodoo
included busybox
USB OTG v5
FSync control
CRT-off animation fix from CyanogenMod team.
This kernel uses smartassV2 and SIO as default governor and I/O schedulers.
Thanks to all contributors of this kernel!
And welcome to fork it on my github.
Download vta2-kernel #11 here.
Click to expand...
Click to collapse
Can you make a version with also fast charge? Anyway working great
Inviato dal mio Nexus S con Tapatalk 2

I'd like to see more feedback about this kernel as it looks promising. Thank you
Sent from my Nexus S using xda app-developers app

Kernel is good.. snappy.. nice performance..
There is no 1000mhz on the clock, so it's always on 1.24ghz ..
Pls add interactive governor.. I can't change the governor, only shows smartassv2 ...
Battery life not gr8.. But runs well.. power hungry games are smooth.. good overall..
Sent from my Nexus S using xda app-developers app

spupuz said:
Can you make a version with also fast charge? Anyway working great
Inviato dal mio Nexus S con Tapatalk 2
Click to expand...
Click to collapse
may be included in next stable release.

siddhesh.raikar said:
Kernel is good.. snappy.. nice performance..
There is no 1000mhz on the clock, so it's always on 1.24ghz ..
Click to expand...
Click to collapse
This is inspired by SAMSUNG Infuse 4G, which use the same CPU and do not have 1.0GHz step in its stock kernel.
when there are both 1.24 and 1.0GHz, the governor will prefer to use 1.24GHz. And i thought it may help governor switch between steps faster.
so it won't eat more battery in this case.
siddhesh.raikar said:
Pls add interactive governor.. I can't change the governor, only shows smartassv2 ...
Click to expand...
Click to collapse
I only built smartassV2(tweaked) into kernel. because it balance between battery life and performance.
There are also include kernel module of ondemand and conservative, you could load them by insmod if you like.

Thank you very much and must try it .

krfoy said:
This is inspired by SAMSUNG Infuse 4G, which use the same CPU and do not have 1.0GHz step in its stock kernel.
when there are both 1.24 and 1.0GHz, the governor will prefer to use 1.24GHz. And i thought it may help governor switch between steps faster.
so it won't eat more battery in this case.
I only built smartassV2(tweaked) into kernel. because it balance between battery life and performance.
There are also include kernel module of ondemand and conservative, you could load them by insmod if you like.
Click to expand...
Click to collapse
Thanks... Pls try and include HighBigMem in the next version...

thanks for your kernel! i will try it now and report back
EDIT: unfortunately kernel doesn't work for me - i use it with paranoidandroid and rom was really sluggish at first (maybe cache-related...). then i startet setcpu for adjustments and the phone stopped responding with "colorful snow" on the screen. i pulled battery to reboot. - maybe my 9023 doesn't like 1,24 ghz (it is a bit picky, but 1,2 ghz at stock vol was never a problem).

invd said:
thanks for your kernel! i will try it now and report back
EDIT: unfortunately kernel doesn't work for me - i use it with paranoidandroid and rom was really sluggish at first (maybe cache-related...). then i startet setcpu for adjustments and the phone stopped responding with "colorful snow" on the screen. i pulled battery to reboot. - maybe my 9023 doesn't like 1,24 ghz (it is a bit picky, but 1,2 ghz at stock vol was never a problem).
Click to expand...
Click to collapse
Not so sluggish at my side.

invd said:
thanks for your kernel! i will try it now and report back
EDIT:i startet setcpu for adjustments and the phone stopped responding with "colorful snow" on the screen. i pulled battery to reboot. - maybe my 9023 doesn't like 1,24 ghz (it is a bit picky, but 1,2 ghz at stock vol was never a problem).
Click to expand...
Click to collapse
same here with nstools

@OP or @DaXmax: Is there anything I can do to help at finding the problem? logcat? or is it just my phone being picky?

Deep idle? Are u sure it's fully working?
Sent from my Nexus S using xda app-developers app

ioplkj13 said:
Deep idle? Are u sure it's fully working?
Sent from my Nexus S using xda app-developers app
Click to expand...
Click to collapse
Its working.
I may replace deep idle with CPUidle or IDLE2 by _thalamus in the future.

invd said:
@OP or @DaXmax: Is there anything I can do to help at finding the problem? logcat? or is it just my phone being picky?
Click to expand...
Click to collapse
try stock kernel or raise up voltage?

krfoy said:
try stock kernel or raise up voltage?
Click to expand...
Click to collapse
can you update OP with to do list feature that are you going to add?

krfoy said:
try stock kernel or raise up voltage?
Click to expand...
Click to collapse
yea, well, with stock kernel (and thalamus and matr1x and air kernel) everything runs fine, but i wanted to know, if there is a way to find out what exactly causes the problem with your kernel and my phone (which also might help somebody else). - raising the vol does not help that much, still some freezes from time to time (even though i'm above stock vols).

why thread closed of Nemesis X rom

whats the matter?
y its closed?
y development stopped?

AW: why thread closed of Nemesis X rom
read the last post
http://forum.xda-developers.com/showthread.php?t=2059092
thread closed as the development stopped
Gesendet von meinem LG-P970 mit Tapatalk 2

look guys , because everyone is asking about this ,, im currently finished all the rom stuff except for the kernel ,, i cant find a stable kernel to use ,, everyone is used drains battery while device is on\suspend ,, if u want a good rom just wait till i get a good kernel

rrgrrg said:
look guys , because everyone is asking about this ,, im currently finished all the rom stuff except for the kernel ,, i cant find a stable kernel to use ,, everyone is used drains battery while device is on\suspend ,, if u want a good rom just wait till i get a good kernel
Click to expand...
Click to collapse
Why not use StrongAccrod? It is sooo stable!

WIIstpM said:
Why not use StrongAccrod? It is sooo stable!
Click to expand...
Click to collapse
what version to be exact and send me a link for it

rrgrrg said:
what version to be exact and send me a link for it
Click to expand...
Click to collapse
Toccata Version 0.2 - http://d-h.st/Xdh
for a good balance between performance and battery life use smartassv2/ sio
you can ask Hellmanor for more informations

glückspilz said:
Toccata Version 0.2 - http://d-h.st/Xdh
for a good balance between performance and battery life use smartassv2/ sio
you can ask Hellmanor for more informations
Click to expand...
Click to collapse
I probably would not go for this older version, OK it has higher OC and so runns probably faster if it runs at all.
If you really want to take a OC kernel from Hellmanor I would go for one of those:
Download Adagio 0.1a - Stable version - http://d-h.st/cCW or/and
Download Adagio 0.1a - Stable version HIGH VOLTAGE - http://d-h.st/Uck
There is just this problem when somebody makes a ROM he probably wants a lot of ppl to use it and when you use a OC kernel that some ppl can't even get to run it's not to good. But yes speek with Hellmanor maybe he makes a version of his kernel with no or lower OC for the ROM and when that works they can always try a other version with higher OC.

SaschaKH said:
I probably would not go for this older version, OK it has higher OC and so runns probably faster if it runs at all.
If you really want to take a OC kernel from Hellmanor I would go for one of those:
There is just this problem when somebody makes a ROM he probably wants a lot of ppl to use it and when you use a OC kernel that some ppl can't even get to run it's not to good. But yes speek with Hellmanor maybe he makes a version of his kernel with no or lower OC for the ROM and when that works they can always try a other version with higher OC.
Click to expand...
Click to collapse
i contacted him for a special kernel with only gpu oc and some stuff regarding battery and ondemand govenor ,, if it gets well i will post my rom asap ,, if not i will use gabwerkz's echlon kernel ,, i know some of u will have gps problems but i will try to fix it :laugh: ,,but thats if hellmanor's kernel isnt good which is 99.9% not gonna happen

Well I am using Toccata 0.3 and it is unbelievably smooth and very battery efficient (phone goes in deep sleep after 5secs) also the governors he implemented and the freq table used are good too!
I recommend you try Adagio 0.1a High Voltage
Sent from my LG-P970 using Tapatalk 2

I will try with that kernel ...
Sent from my LG-P970 using Tapatalk 2

Go ahead release it with any working kernel
@rrgrrg
We can try different kernels available (StrongAccord, ZG or whatever). Later we can feedback which one works best. Later you can release a patch if you want.
By the way, there is a new V30c released by LG. Feedback is good, see if you can integrate...Thanks

ok now hellmanor made me a kernel with these specs based on v30c
-Ondemand tweaked for more battery
-some battery tweaks
-gpu OC to 280mhz
-leds are only white ,,its better for the ui :fingers-crossed:
Click to expand...
Click to collapse
im testing it now ,, if it goes well i will publish my rom ,, if not i will use Adagio 0.1a High Voltage

rrgrrg said:
ok now hellmanor made me a kernel with these specs based on v30c
im testing it now ,, if it goes well i will publish my rom ,, if not i will use Adagio 0.1a High Voltage
Click to expand...
Click to collapse
And please use a dark theme. White is too bright and annoying. Ics is supposed to be dark.
Sent from my LG-P970 using Tapatalk 2

Personall I like white UI :/ It's what makes Lg stad out somehow in terms of ICS
Btw having smartassv2 and conservative in the kernel would be great! conservative for screen off (set in setcpu) and smartassv2 is more battery efficient than ondemand... And why no blue leds I don't really mind but... it makes our OB looks like any other Android phones lol

ykumar00 said:
And please use a dark theme. White is too bright and annoying. Ics is supposed to be dark.
Sent from my LG-P970 using Tapatalk 2
Click to expand...
Click to collapse
Why dark theme? I really like the white theme, it is very nice. Keep it in the next ROM please :good:

Go with the majority I guess

ykumar00 said:
Go with the majority I guess
Click to expand...
Click to collapse
Your white optimus black would look fabulous with a white Ui

WIIstpM said:
Your white optimus black would look fabulous with a white Ui
Click to expand...
Click to collapse
Haha I didn't think of that! Maybe it will. We'll see. XD

rrgrrg said:
ok now hellmanor made me a kernel with these specs based on v30c
im testing it now ,, if it goes well i will publish my rom ,, if not i will use Adagio 0.1a High Voltage
Click to expand...
Click to collapse
and ... how is the new kernel?`are you satisfied with it or are you going to use another kernel?

glückspilz said:
and ... how is the new kernel?`are you satisfied with it or are you going to use another kernel?
Click to expand...
Click to collapse
hellmanor is working now on fixing the viperx kernel :good: