Related
Hi, I cleaned the screen of my HTC Diamond with a bit of alcohol and a pice of tissue and it seems that the alcohol got inside of the Power button. Now, every time I try to turn the screen on by touching the power button, it turns the screen on but it dispays a message that says: "Warning: Power will be turned off and you may lose data if you have not saved them. Do you want to continue?"
If I click YES, it reboots the phone, If I click NO, then its ok. That is fine, but the problem is when I want to turn the phone off. It's impossible. It will keep trying to reboot.
Does anybody know what can I do? I am really worried.
One solution could be to make some other button from the phone to act as the power button (like the Home button that is rarely used). How can I do that?
Please help!!!!
Thank you
Hi,
I have the same problem.
Did you already find an answer ?
No, I didnt find the solution. I tried to fix the hardware but didnt succeed. So, I created a dummy file to emulate the poweroffwarning.exe that pops up when you long press the power button.
Solution
Hello, I have one AT&T TITL 8925 that upgraded to Windows Mobile 6.5
After the new software was loaded I saw same behavior on my phone.
When the phone is ON and I pressed the power button sometimes it do not respond, and others I received the warning message "power will be turned off and you may lose data if you have not saved them..." My first tought was that it is because the processor is slow to this new software release, or maybe my phone is damaged. I was working perfectly with previous (light version) release so my final guess is that this sw requires more uses of the processos.
Anyways what I have been doing is before turing it off I press the red button or hang up button, and after this if I press the power button it works fine (No more warnings). I have some theories but I will keep doing the same
Hope this partial solution helps you as it does for me.
Regards
Jerry
this is not working for me :| the problem is i can't use my power button not even to open my display when it goes to sleep :|:| i don't know what to do guys please help me
You can use the Stylus to awake the phone, instead of using the power button. You can also use TouchLockPro, to suspend the device, so you do not need the power button for that too.
Also you can set the phone to awake on pressing any key (Windows Mobile Setting), but be sure to have a good locking tool, which makes sure you do not have bogus calls and it goes to sleep again fast enough, otherwise it will drain battery.
I have the same problem.
Anyone solved this one?
I have the same issue and this is not a hardware problem. Strange since even updates/changes of the rom do not correct the issue. Did anybody find a solution for this...?
Well.. ive had this problem just ones.. I was walking downtown with my diamond in the frontpocket of my jeans (face down), after about 3min. of walk, it started to rain (big drops), and my clothes got completely wet, i turned around emidietly, to walk back to home. When i got home after 3 more min. i layed the phone on the table, and then i could hear there were somethibg wrong.. The "turn off" sound came, and the notification kept on coming up, even though i pressed No, as if i were just holding the power button down.. Then i began to press the power button continuesly for about a 100 times, and to my surprise then it stopped and have functioned perfectly for about 2 month now.. Something tells me theres some serius promlem with the smallest kind of moisture near the power button on this phone..
Yes this is hardware related.
If you take a look at the inside of the powerbutton, there are 2 points making contact when you press the button.
If you press it, the software will recognize this and the screen will turn off.
If you press it long enough you'll get the "Do you want to turn off your device" message.
But, if water gets underneath the button, the 2 points may be making contact, because water/alcohol conducts.
In this way you'll get that message.
The button is very weak. Due to this, it may not properly work if you have used it for a long time.
I think that could also be a reason why you constantly get that message.
[ElCondor] said:
Yes this is hardware related.
If you take a look at the inside of the powerbutton, there are 2 points making contact when you press the button.
If you press it, the software will recognize this and the screen will turn off.
If you press it long enough you'll get the "Do you want to turn off your device" message.
But, if water gets underneath the button, the 2 points may be making contact, because water/alcohol conducts.
In this way you'll get that message.
The button is very weak. Due to this, it may not properly work if you have used it for a long time.
I think that could also be a reason why you constantly get that message.
Click to expand...
Click to collapse
Hi! on one of my diamond, the power button off from the board. So the black little board with the button itself is not part of the complete circuit anymore... if someone know the hw testpoint for that it would great please.... i see a few TP around, but if i just start sorting them i just going to kill it...I use to flash phones with TP so is not new for me , but i find nothing for diamond.
I have a similar issue. Mine seems like it is almost stuck on, so it wakes its self up all the time, meaning a full charge lasts an hour or two. Then when it runs out of battery it tries to switch itself back on, so goes through a continuous cycle of vibrating and beeping until the battery is removed. The gf finds it very annoying at 3am lol.
Don't recall mine getting wet, but it's possible it could have got damp at some point, but it's been doing this now for about 3 weeks.
Tried a hard reset with no luck.
[ElCondor] said:
Yes this is hardware related.
If you take a look at the inside of the powerbutton, there are 2 points making contact when you press the button.
If you press it, the software will recognize this and the screen will turn off.
If you press it long enough you'll get the "Do you want to turn off your device" message.
But, if water gets underneath the button, the 2 points may be making contact, because water/alcohol conducts.
In this way you'll get that message.
The button is very weak. Due to this, it may not properly work if you have used it for a long time.
I think that could also be a reason why you constantly get that message.
Click to expand...
Click to collapse
I can see that how to remove the power button from the video showing how to replace the screen. Any idea if once removed the button can be fixed, if not can you get replacements?
2004mark said:
I can see that how to remove the power button from the video showing how to replace the screen. Any idea if once removed the button can be fixed, if not can you get replacements?
Click to expand...
Click to collapse
I think I should send it to HTC, and ask them to do it. Or go to a repair centre. But I should not try it myself, because it can be dangerous for the diamond.
Also try searching on ebay, there might be the parts you could use.
Good luck!
is there a way to remap the power button?
my diamond face same problem since this afternoon, arrrrgghhhh!!!
- blocking hwbutton1, hwbutton2, hwbutton3, hwbutton4, hwbutton5, hwbutton6, hwbutton7 >>>> NO LUCK
- hard reset >>> NO LUCK
guys, any of you solved the problem yet
youtube.com/watch?v=Q4SEQ6AUFOI
My Sony X1 have some strange problems with the power button. When it goes into sleep mode, I can not wake it up with the power button, all I can do is to soft reset. Sometimes it does not go into sleep mode either , it just "wake up" all the time. I don't know what's wrong with it, tried Hard reset but no use .
ANyone had this problems before?
@
The only way to solve this is to leave the phone near your laptop heat vent ( fan) . hot air from it might help you to get the power button up and running. But if that to doesn't work then i'm afraid thats bad.
Current sol :
1. download SU2U ( search threads )
2. go to the settings and make the " lock when stylus inserted" option ON
3. Change the screen turn off time to 5 secs..
So , to unlock , remove stylus , to lock -> insert it back ( its turns off the back light within 5 sec )
Less annoying
elektros said:
youtube.com/watch?v=Q4SEQ6AUFOI
Click to expand...
Click to collapse
thanks for this link, i accidentally tear off my power button flex. now i could turn it on again. Thanks elektros
My power button on my Kaiser is ridiculously sensitive. I barely touch it and it turns the screen off. It started doing this after I flashed to a rom on here. I've flashed many times before that and never had a problem. Is there's a registry setting or some system setting that can make the power button less sensitive?
It doesn't sound like software issue to me. I mean, button has mechanical contacts that need to be pressed, even if you do not have the ROM on the pda, it will work with the same sensitivity. Try maybe it got stuck almost pressed or something.
Any dust/dirt blocking its proper function? Maybe worth opening up the case for a look.
I opened the back cover and blew it out. I noticed that when I press the button harder, it doesnt do it sometimes. I've been pressing it firmly all day and it seems to have worked, so like mentioned before, there was probably some dust in there. Thanks guys.
okay so when my n1 is in sleep, it takes like 3 tries to wake it up. The first time I press the unlock button the unlock screen comes and then goes back to sleep instantly. The second time the lights for the back menu home and search light up and that's it. the third time it works. I'm on froyo. anyone else with this problem?
I have a similar issue.
Sometimes just the capacitive buttons light up and not the screen. I have to make 2 or 3 tries to get it to turn on. Its rare, but its there. It only happened on 2.2.
ok good, me too!
was just looking for this topic.
mine doesnt always turn anything on at all. sometimes the light go on, others nothing. Also trying to turn off the phone is hard as it sleeps straight away with out opening up the power menu.
I have a stock N1, which recently updated to Froyo, with the same problem.
any ideas would be great!
cheers,
lorin.bute said:
I have a similar issue.
Sometimes just the capacitive buttons light up and not the screen. I have to make 2 or 3 tries to get it to turn on. Its rare, but its there. It only happened on 2.2.
Click to expand...
Click to collapse
Also happens on CM 5.0.7.1.
i think it may be a hardware button issue.
I have tried turning mine off (had to pull the battery out) and then to turn it on.
It should turn on readily as it has nothing to do with the OS at that point.
any ideas?
No HW button issue described. HW button works - if it didn't, lights wouldn't go on. It's a wrong reaction on the button, at least that's what OP describes (and me too).
Your N1's power button is dying, it's a known HARDWARE issue. I experienced all of that what you may think a software bug, nut dear friends, prepare to meet HTC or Google for warranty. My N1's power button is dead, I couldn't swap for a new one because I bought it in my country where no official distributor for N1 yet. Sad!
ps: you may try to search for "N1 power button" and see there are more and more reports about this problem.
I've read more than one or two threads on power button issues, and I know what I'm talking about. My power button DOES power up the phone when the battery is taken off the first shot, it DOES wake the phone from standby, it DOES register long presses - there was even one time when a second press was long, and suddenly the screen woke up with power menu, while the first press left it dark with touch button light going on.
Doesn't look even a bit like HW to me. HW would leave the phone dead, non-responsive to touches, or create a loose touch which would translate into several touches - none of those would EVER turn into a phone being on with screen off, and suddenly snapping back to screen on when the SCREEN is touched several times.
Could be your cpu was too busy to accept any inputs.
I have a thread about it here:
http://forum.xda-developers.com/showthread.php?t=692874
Take your time! As for me, I'm using my N1 for 3 months now for the power button to completely dead with everyday use (I didn't use any app to trackball-wake).
As I said, all the things you are yelling I have been through. And I, too, thought it was software problem.
I tried both MCR and Cya with no hope.
Good luck!
ps: One of my friend just told me about his N1's power button issue right after hearing me telling about mine.
This sucks
anyone know where i can buy a new button??
Corrupt SD Card
I had the same issue. I'd press the power button, the bottom four buttons would light up but no screen wake. Only way to get out of it was to pull the battery. It would happen maybe 30-40% of the time. (Nexus One Froyo FRF72)
I think it was due to a corrupt MicroSD card. I recently installed a 32gb card and put some music on it using songbird and possibly didn't safely remove. That's when I started getting issues. Removed the SD card completely and it worked fine. Changed back to the old card and no issues. Then formatted the 32gb and tried again, worked fine. Then I tried to transfer more music, there was an error and I got the same problem. (Cheap ebay card from Hong Kong, that'll teach me).
Anyway, I'd be interested to know if that solved anyone else's problem, because all I see on forums are that it's a faulty power button, but that didn't seem to be the case in my situation.
Cheers,
Dylan
-Witty esoteric statement about science/technology.
Mine is doing kinda the same weird thing but a little different.
When I push the power button the screen comes on but is unresponsive to touch. If I press the power button again the screen dims and then turns off, the home keys light up and then the trackball glows white. The phone then does not respond to the power button for around 10 secs and repeats this behavior 4 or 5 times until it actually starts working correctly and I can swipe my finger to get to the home screen.
It usually does this after being inactive for a period of time, like after sitting overnight.
FRF91
LancherPro Beta 0.6.7.2(maybe the problem?)
jimbobalu said:
Mine is doing kinda the same weird thing but a little different.
When I push the power button the screen comes on but is unresponsive to touch. If I press the power button again the screen dims and then turns off, the home keys light up and then the trackball glows white. The phone then does not respond to the power button for around 10 secs and repeats this behavior 4 or 5 times until it actually starts working correctly and I can swipe my finger to get to the home screen.
It usually does this after being inactive for a period of time, like after sitting overnight.
FRF91
LancherPro Beta 0.6.7.2(maybe the problem?)
Click to expand...
Click to collapse
i have almost the same issue, although mine happened twice when i was on EPE54B but it's been far more common on FRF91
the only difference is my power will continue to turn the back light on and off no matter if the screen has already timed out or not
kobecamp2009 said:
okay so when my n1 is in sleep, it takes like 3 tries to wake it up. The first time I press the unlock button the unlock screen comes and then goes back to sleep instantly. The second time the lights for the back menu home and search light up and that's it. the third time it works. I'm on froyo. anyone else with this problem?
Click to expand...
Click to collapse
I have exactly the same issue. Over in the general forum, there's another thread on this issue. Many, myself included, are reporting that this problem started after the FRF91 update. Can you confirm?
rtx101 said:
Your N1's power button is dying, it's a known HARDWARE issue. I experienced all of that what you may think a software bug, nut dear friends, prepare to meet HTC or Google for warranty. My N1's power button is dead, I couldn't swap for a new one because I bought it in my country where no official distributor for N1 yet. Sad!
ps: you may try to search for "N1 power button" and see there are more and more reports about this problem.
Click to expand...
Click to collapse
Read again carefully. Are you sure your hardware problem was identical to what the OP described? I've noticed a lot of people with obvious hardware problems (i.e., the power button is completely unresponsive) posting on threads like this when they actually have a different problem. It's very confusing.
britoso said:
Could be your cpu was too busy to accept any inputs.
I have a thread about it here:
http://forum.xda-developers.com/showthread.php?t=692874
Click to expand...
Click to collapse
This sounds VERY promising -- thank you britoso!
PS: Are you guys getting the unresponsive unlock slider like britoso describes?
I had this problem when I first flashed CM6 yesterday. Even after wiping and reflashing it was the same. Only way to get out of the black screen was to do a soft reset, power + vol down + trackball. I finally found out that my SD card malfunctioned and was corrupt. I tried reformatting the sd card in an microsd card reader but windows said it could not be reformatted. I finally switched back to another microsd card that was working, wipe and reflashed cm6 and the problem went away. Try backing up all the data on your microsd onto your computer then reformat it and wipe then reflash to see if it works
Edit: ughhhh it just happened again, but not as bad as before, turns back on after second try... maybe i didnt press the trackball hard enough
Hello all,
I got my phone when they first came out on Jan 5th and have just ran into my first issue. It seems that the power button has become really hard to press (like it is lower than it used to be). I have to press down just right to get it to register. I know that others have been having power button issues and was wondering if anyone has ran into this? Any suggestions on actions to take? What were others peoples power button issues?
Thanks
Yea, I started to use No lock from the market its free. With this program you can use the trackball to unlock you phone or bring it from sleep mode you will not have to use the power button as often.
Hope this helps
Is your button hard to press or just not registering?
Sometimes I would have to push it more then once. So I don't believe its really hard to push but, more so just not registering all the time.
It's not to often I had that problem. but, I did notice you have to use the button alot so I didn't want to wear it down.
Mine used to be like that and then eventually it became extremely hard to press. Practically took 10-15 tries using force to get it to turn on. I sent it back to HTC and now it's more responsive than when I first got it. Took about 4 days total.
Leo Laport's nexus's power button broke. Just send it back.
It could be just dust under the power button. I just took off the back cover and blew at the space under the power button. It's working every time now. Worth a shot before you send it in anways.
I have the same issue, hard to press and sometimes not registering at all.
Unfortunately trackball wake is not available for froyo yet. This would be a fine workaround for me.
I was having problems with the power button not working well, but it seems to be much better under the new FRF72 Froyo build.
SBS_ said:
It could be just dust under the power button. I just took off the back cover and blew at the space under the power button. It's working every time now. Worth a shot before you send it in anways.
Click to expand...
Click to collapse
Good idea!
SBS_ said:
It could be just dust under the power button. I just took off the back cover and blew at the space under the power button. It's working every time now. Worth a shot before you send it in anways.
Click to expand...
Click to collapse
+1 on the excellent suggestion.
The rear battery cover is integral to the power button assembly. It keeps it aligned on the fore aft axis. So dust and crap therein seems to restrict it at times. If you have power button issues, at very least remove the battery cover to see if releasing the friction it creates improves things. The power button becomes somewhat wobbly and loose with the rear cover off.
I just rooted my turbo with Moforoot and it's been O.K. yesterday except the fact that i couldn't install xposed after hours upon hours. I was tired and decided to sleep and my phone fell off my bed and this morning it was dead although the battery was alright. I have a case on my phone and i've dropped it other times. It is also noteworthy saying that today i FELT as if my power button was sort of permanently jammed in my phone - it feels like the power button doesn't come out as much as it should- .
Main concern: my phone has been freezing every so 7-10 minutes after turning it back on, even after deleting and undoing everything that I had done since the day I rooted my droid.
Second Concern: I'm not sure whether my droid's power button normally came with a somewhat deep power button. If anyone can, can you check to see if, when you push in your power button, whether or not the button gets pushed PASSED the phone as in it gets pushed into the phone, unlike the volume buttons. Thanks guys. This problem has made my weekend quite hectic.
It is also worth noting that my phone has had no problems before, so it is fair to conclude that this problem is either due to the rooting, the tampering, or the dropping of the phone.
If anyone would be so generous and would post a video of them pushing their power button, that would be of great help too. Thanks everyone.
-Qarie
Hey - saw your post - I also rooted recently. Separately, was also critical of the right side buttons on a naked XT1254. They are too easily engaged, pocket-pressed or could be "over-pushed" or jarred in a drop.
Buttons: Put your naked phone in a good case that has its own buttons that overlay those on the phone. I use a Tudia hard case. It's bit thick & heavy but the Tudia's buttons take some pressure to push & cannot be pocket-pushed. The case's buttons balance the too-soft touch on phone's buttons nicely. Totally solved over-pushing and no more pocket-pushes.
Root:
I had a couple of crashes post-root too, but tracked it down to a SU conflict between AirPlay and AirAudio BT streaming music or vids from GMusic or DoubleTwist on android>Apple TV>hifi system. Problem solved, gave SU access to AirAudio and took it away from AirPlay and all's right since. Be cautious which apps get SU access and which do not. If your phone crashes, besides a regular restart w/ power button, consider a hard restart pressing screen + both volume buttons at same time. See if the ensuing rooted restart makes the phone behave. It did for me and I've had no probs since. Root freedom has its price! Good luck.
--------------------------------
It is also worth noting that my phone has had no problems before, so it is fair to conclude that this problem is either due to the rooting, the tampering, or the dropping of the phone.
If anyone would be so generous and would post a video of them pushing their power button, that would be of great help too. Thanks everyone.
-Qarie[/QUOTE]
bookman888 said:
Hey - saw your post - I also rooted recently. Separately, was also critical of the right side buttons on a naked XT1254. They are too easily engaged, pocket-pressed or could be "over-pushed" or jarred in a drop.
If your phone crashes, besides a regular restart w/ power button, consider a hard restart pressing screen + both volume buttons at same time.
-Qarie
Click to expand...
Click to collapse
[/QUOTE]
Unfortunately, my power button was "over-pushed" in a drop (putting phone in pocket with gloves on, missed the pocket...oops phone managed to land precisely on the power button) and no longer works. The button is now limp/loose and no longer makes any "clicking" tactile response when pressed. Obviously it does not control the power anymore. I have been afraid to take it into Verizon as there is some clear physical damage near the power button and I am sure I will need to pay to have it warrantied. I wish I would have seen your advice to put it in a case that protected the buttons before it was too late!!
I just wanted to reiterate your point and also ask a follow-up question about your hard restart advice? I have never heard of this method before (pressing screen/both volume buttons). I am a habitual resetter of my devices as I feel like starting with a clean slate always makes them run faster, but unfortunately can't do this anymore unless I let the phone run out of battery completely (which is pretty much impossible with this unit LOL).
Thanks in advance.
I just wanted to reiterate your point and also ask a follow-up question about your hard restart advice? I have never heard of this method before (pressing screen/both volume buttons). I am a habitual resetter of my devices as I feel like starting with a clean slate always makes them run faster, but unfortunately can't do this anymore unless I let the phone run out of battery completely (which is pretty much impossible with this unit LOL).
Thanks in advance.[/QUOTE]
I'm not sure what your question is. I discovered 3 button method of reset and found it worked. Had a few crashes the first days post root but since all's well. Zero crashes in 2 weeks. . Not expert enough to tell you why is works, it just did in my case. If you're apprehensive about verizon repair, find a local phone tech, it shouldn't be that tough or costly to replace a power-on button. Then buy a good case!
bookman888 said:
I'm not sure what your question is. I discovered 3 button method of reset and found it worked. Had a few crashes the first days post root but since all's well. Zero crashes in 2 weeks. . Not expert enough to tell you why is works, it just did in my case. If you're apprehensive about verizon repair, find a local phone tech, it shouldn't be that tough or costly to replace a power-on button. Then buy a good case!
Click to expand...
Click to collapse
I am wondering what exactly this three button method is? I am not rooted so it might not work for me (scared to root with the broken power button! thanks for the advice re: local phone tech, I will look into that), but how does it work? Where do I press on the screen, etc? If you could give me a step by step it could prove very helpful.
Thanks.
jfrostad said:
I am wondering what exactly this three button method is? I am not rooted so it might not work for me (scared to root with the broken power button! thanks for the advice re: local phone tech, I will look into that), but how does it work? Where do I press on the screen, etc? If you could give me a step by step it could prove very helpful.
Thanks.
Click to expand...
Click to collapse
=====================
If your power button is toast, then this is not going to work, but if the power button is functional...
In any screen, just hold down Power + VolUp + VolDown simultaneously for about 3 to 5 seconds or until the phone goes dark.
Then release all 3 buttons and the phone will restart itself in a few seconds with the usual DROID animation screen. No need to press Power-on again.
I'm not a tech but suspect this kind of restart clears a few caches and the phone should run normally on restart, rooted or not. I've done this about 4 or 5 times with no issues. This method will also work if an app "freezes" the phone. It's just another way to restart. Let me know if it works out for u.
bookman888 said:
=====================
If your power button is toast, then this is not going to work, but if the power button is functional...
In any screen, just hold down Power + VolUp + VolDown simultaneously for about 3 to 5 seconds or until the phone goes dark.
Then release all 3 buttons and the phone will restart itself in a few seconds with the usual DROID animation screen. No need to press Power-on again.
I'm not a tech but suspect this kind of restart clears a few caches and the phone should run normally on restart, rooted or not. I've done this about 4 or 5 times with no issues. This method will also work if an app "freezes" the phone. It's just another way to restart. Let me know if it works out for u.
Click to expand...
Click to collapse
Got it. Ya, I guess that won't work for me - I got confused because earlier you said "press screen" so I thought perhaps that might just be the phone screen itself (not the power button). I will look into a local phone tech, this is getting ridiculous!
Workaround . . .
Qarie said:
I just rooted my turbo with Moforoot . . . today i FELT as if my power button was sort of permanently jammed in my phone . . .
Click to expand...
Click to collapse
jfrostad said:
Unfortunately, my power button was "over-pushed" in a drop (putting phone in pocket with gloves on, missed the pocket...oops phone managed to land precisely on the power button) and no longer works. . .
Click to expand...
Click to collapse
Just FYI, I'm using an app+widget called Power Toggles (link below) that offers on-screen tap functions, including power, for rooted devices. The widget bar is customizable, to include adding a button that will give you pretty much all options for restarting your phone: Power off, Reboot, Reboot to Recovery, etc. You have to scroll way down the "Add" list to find the power-related buttons, but there's a "master" button that provides several options on pop-up.
I believe it could serve as a good temporary (or permanent) workaround for a broken power button, as long as the phone is never actually turned off ('cause then you really would need a working power button).
There may be other apps that do some of the same things, but I've been using P.T. for a month or more and I'm extremely happy with it. Here's the app info (browser link):
https://play.google.com/store/apps/details?id=com.painless.pc
( PS: I don't have a Turbo yet, I'm just browsing the forum for info. )
Moondroid said:
Just FYI, I'm using an app+widget called Power Toggles (link below) that offers on-screen tap functions, including power, for rooted devices. The widget bar is customizable, to include adding a button that will give you pretty much all options for restarting your phone: Power off, Reboot, Reboot to Recovery, etc. You have to scroll way down the "Add" list to find the power-related buttons, but there's a "master" button that provides several options on pop-up.
Click to expand...
Click to collapse
Thanks for the helpful and informative post. I already use PowerToggles but am not currently rooted.
No problem. Yeah, I didn't realize it was using root (on my Razr M, at least for the power functions) till I installed it on my unrooted Moto X.