Hey guys, I'm no regular here but my friend has a LG Optimus 2X which I rooted for him and installed AOKP (this was a couple of months ago).
Anyways, today I saw him and he said he was having problems with the sdcard in the phone so I took a look and found that the sdcard, was for lack of a better word, ****ed. In CWM I tried to partition the SD many times, to no avail, and each time CWM hung up at partition command. When I saw this I pulled out the battery, and the phone worked as normal. The last time however, I did the same things, but when booting up after the battery pull I tried putting it into recovery mode (which I believed to be pressing all three buttons in while booting (STUPID ME)). Anyways, now the phone refuses to do anything at all (ie. boot up, vibrate, turn screen on or indicate charging). I plugged it in to charge at the possibility of a dead battery, and the phone is getting a little warm (good sign?!?!). I'm not sure where to go from here, but from what I've seen there haven't been many complete bricks of this phone, only soft bricks. SO.... (sorry for such a long winded post) does anyone know where to go from here? Many thanks in advance, as although this phone is also Android, it's fairly new to me.
-Adbirdie
First thing first: To check if the phone is dead or not, take out the battery. Hold volume-down while plugging in a usb-cable attached to the computer. This should bring up a software update screen. If it does not, it might be dead.
Secondly, if its alive, the Wind is a P999, not a P990, so head over to the G2X-forum and look for smartflash or nvflash-instructions there.
You'll want to look for the thread titled something along the lines of "ROM for recovery under NVFlash" it will place stock tmo 2.3.3. Then look for one click recovery installer which again uses nvflash. All in the tmo g2x section. Which should be labeled as p999 section. This should be labelled p990 section.
Edit: this thread http://forum.xda-developers.com/showthread.php?t=1248644
Edit 2: this one after http://forum.xda-developers.com/showthread.php?t=1056847
TrymHansen said:
First thing first: To check if the phone is dead or not, take out the battery. Hold volume-down while plugging in a usb-cable attached to the computer. This should bring up a software update screen. If it does not, it might be dead.
Secondly, if its alive, the Wind is a P999, not a P990, so head over to the G2X-forum and look for smartflash or nvflash-instructions there.
Click to expand...
Click to collapse
OMG. I LOVE YOU (NO HOMO). All I did was check if the software update screen would appear (it did), after that I tried booting the phone up normally again, and it did XD.
Thank you so much man you saved me a lot of time.
You're welcome. I wish all problems were solved as easily
Related
I've had a hunt around the forum and the net in general to look for solutions, but haven't come across the same issue.
The tab was running Overcome 4.10 just fine, but I decided I'd wipe everything in CWM and go for some ICS action instead. I used every wipe option.
In retrospect, I should have RTFM, but I used every wipe option in CWM.
After I did this I rebooted the tab and it went back to CWM. I decided I didn't want to do anything there and then, so I turned the tab off and came back to it later.
Hit the power button - no joy. Plugged in my charger cable and after a few seconds it came to life showing the battery charging screen, but it did not change from the first few seconds where there is a spinning/loading icon over the battery. I've left it plugged in for well over 4 hours in total now and still no joy - the battery screen comes on and goes off of it's own accord.
Now, I'm hoping I just have a dodgy charger cable and I'm going to resolder it just now while I wait for responses.
Any suggestions if that doesn't sort it out?
EDIT -
I've resoldered the cable and it's made no difference.
Also, a bit obvious, but I didn't mention that it will not go into download or recovery mode. The turning it on whilst touching the screen trick doesn't do anything either.
EDIT 2 -
I opened the tab up, disconnected the battery for a few minutes and reconnected. No difference.
adb, Kies and one-click unbrick don't see the tab. Win7 has seen the 2 sd card directories, but couldn't mount/access them. This isn't consistent, though.
Any ideas? I don't know what else I can do
Soft Bricked?My ***
I am very sorry to tell u that this thing looks like Hard Bricked
Anyway try these links
http://forum.xda-developers.com/showthread.php?t=1133590
http://forum.xda-developers.com/showthread.php?t=1127978
Thanks for your reply and the links. Unfortunately, I've tried everything in the first thread with no luck.
I think I'll practice my soldering and try AdamOutler's UnbrickableMod.
I'm curious what exactly bricked it :-/ Wiping the battery stats with no ROM in place?
Oh well
nelsonoski1972 said:
I am very sorry to tell u that this thing looks like Hard Bricked
Anyway try these links
http://forum.xda-developers.com/showthread.php?t=1133590
http://forum.xda-developers.com/showthread.php?t=1127978
Click to expand...
Click to collapse
Hmmm... this looks more like you messed up CWM. Normally, if one chooses to shut down his phone while in CWM, after reboot it gets back into CWM on auto. Try getting into CWM or download-mode by holding the buttons untill you see something happening on the screen.
If that fails, I guess you have a new goodlooking paperweight...
Any idea how CWM might have been messed up? No battery stats maybe confusing things? I find it strange that it did reboot into CWM after I wiped that stuff and then after being powered off it did not turn back on.
A mystery, but you're right - it is a very pretty paperweight
dirlan2001 said:
Hmmm... this looks more like you messed up CWM. Normally, if one chooses to shut down his phone while in CWM, after reboot it gets back into CWM on auto. Try getting into CWM or download-mode by holding the buttons untill you see something happening on the screen.
If that fails, I guess you have a new goodlooking paperweight...
Click to expand...
Click to collapse
Hello,
My O2X is almost dead. I can't power him up and I can't access the S/W Upgrade Mode (Vol down and plug in USB, with or without battery) to use Smartflash or KDZ Updater.
The only way I can get some life signs it's in the APX mode (Vol up, Vol down and plug in USB, no battery). However, when I try to use NVFlash to restore it with Paul O'Brien's release of stock firmware (from Modaco), I'm getting stucked at "waiting for bootloader to initialize".
This happens every time. I'm using the official USB cable and had tried all the three USB ports on my laptop (OS Win7 64 bit).
I'm getting desperate. Since I live in Brazil, the risk that the LG assistance will blow out in my face, for rooting the phone, it's HUGE. I believe they will look carefully into it.
So, am I screwed or not? Any thoughts?
Thanks, in advance.
Hi i doubt they will dig some evidence of rooting if the device is that dead. Fist step they do is flashing official rom anyway, if it will be still bricked, they will replace motherboard.
Sent from my Optimus 2X using XDA
It's hard to know since you don't mention how it all started... I would say they'll replace it. I also suggest changing the drivers on the PC but I assume you don't get any signs of life by just charging it.
Sent from my Optimus 2X using XDA
I have doubts of how it started. But, there were two main problems. I'm going to write it down in cronologycal order:
- In the afternoon, I did a backtoEXT3 (I was using CM 7.2 RC) and a flash of the Modaco ROM. Everything worked perfectly;
- In the evening, my O2X suffered a considerable fall, hitting hard on the floor. But, it continued to work;
- Little later on, I noticed that the phone became a little laggy. Then I decided to turn it off and than on again (since Modaco doesn't have reboot). In the power on process, the phone stood stucked for several minutes in the first "LG" screen. I decided to remove the battery and tried a new boot. That's when the phone went "half dead".
My purpose with this post it's to known if I can try something different or if I should go directy to the LG assistance.
I'd appreciate any help you guys can give me.
Maybe the falling hit it too hard, so it could be a hardware problem. Try apx/smartflash on a different computer (32bit), if it doesn't work, then give it in.
Sent from my LG Optimus 2x with xda premium app
Yup, if LG can't start the phone, they will change motherboard. Not worth their effort to diagnose
Sent from my Optimus 2X using Tapatalk 2
Hi there,
I fear I hard bricked my G1 (after long years of good service as gps device thanks to a 2600mAh battery).
Since it was quite slow on CM7, I downgraded it to CM6.1. But this would'nt boot. (boot loop)
So I did a bit of reading and decided to downgrade the radio too. I downloaded a flashable zip and flashed it the usual way in the CWM recovery - which didn't finish (after a few minutes), so I removed the battery.
Since then my G1 wont start any more. On top of that, it want event charge. If I try to charge it the status led wont event light up. (I already tried it with two different batteries, both yield the same results.)
Funny thing though: If I don't charge it and let it sit for a few hours, the status LED very shortly lights up when pressing the power button. (But other than this nothing happens and if I press the power button again shortly after the LED stays dead.)
So ... I fear the problem is hardware and not software related.
Does anybody have an idea what could be broken (software or hardware) and if it's software based if there's a way to revive my phone?
(Before anybody asks ... yes, I have newer android phones, but I really live my G1 for nostalgic value so if there a way to get it running again I definitely would try.)
thx a lot,
Bapf
Sounds like you need JTAG, and don't take this the wrong way, but flashing firmware isn't the usual way, its the way you brick your phone. If possible always use fast boot to flash firmware or you are asking for a brick.
You can buy the JTAG equipment yourself and the software is free. Or you can see if you can find someone locally to do it. Unless you have a particular sentimental value to this phone it maybe cheaper to buy a new one.... Sorry for bad news
Sent from my Nexus 7 using xda premium
Bricked G1 - Try Again w/ SIM Card IN!
I had the exact symptoms mentioned in this post - tried nearly everything until I finally put back in the SIM card (even through I don't have T-Mobile anymore) - it booted again and registers the AC adapter and/or USB cable. Hope this helps some who are struggling at this level as I did!!
Bapf said:
Hi there,
I fear I hard bricked my G1 (after long years of good service as gps device thanks to a 2600mAh battery).
Since it was quite slow on CM7, I downgraded it to CM6.1. But this would'nt boot. (boot loop)
So I did a bit of reading and decided to downgrade the radio too. I downloaded a flashable zip and flashed it the usual way in the CWM recovery - which didn't finish (after a few minutes), so I removed the battery.
Since then my G1 wont start any more. On top of that, it want event charge. If I try to charge it the status led wont event light up. (I already tried it with two different batteries, both yield the same results.)
Funny thing though: If I don't charge it and let it sit for a few hours, the status LED very shortly lights up when pressing the power button. (But other than this nothing happens and if I press the power button again shortly after the LED stays dead.)
So ... I fear the problem is hardware and not software related.
Does anybody have an idea what could be broken (software or hardware) and if it's software based if there's a way to revive my phone?
(Before anybody asks ... yes, I have newer android phones, but I really live my G1 for nostalgic value so if there a way to get it running again I definitely would try.)
thx a lot,
Bapf
Click to expand...
Click to collapse
I don't know if this will work,as I've never encountered a situation such as this, but have you tried bootloader(power button+camera button)?
If you can get it into bootloader, then I have the original rc29 DREAIMG.NBH file(plus, rc29 is the best place to start if you want to root it or install a custom rom).If you get it working and just want stock 1.6, i have those updates as well.
(all said out of hope, I have a g1 and I love it,I'm really glad that someone else shares my enthusiasm!!)
If bootloader works, give me your email and i'll send you the files, good luck!:fingers-crossed:
Nope. It won't even start the bootloader.
Sent from my Nexus 4 using xda app-developers app
Well thats unfortunite, I guess it's just for a soft brick.
I hope someone can help me here, I'm posting with the belief that this may be a simple enough problem (With the hope).
I tried to install a Custom Recovery on my Galaxy S using this tutorial - wiki.cyanogenmod.org/w/Install_CM_for_galaxysmtd
I managed to get to step 6, and a blue bar appeared, but then i could not do step 7.
Now i cannot boot into recovery mode, nor will the phone boot past the Samsung Galaxy S logo.
I can still get into download mode, but Odin does not detect the phone.
. I have changed cable and tried different versions of Odin..
When i turn on the phone normally it shows the Samsung Galaxy S logo, blinks, and then reboots and does the same.
When i try to enter recovery, i get the same, unless i connect it to the PC. I then get an 8 pointed star, like the loading flash circle thing - the same as a flash video loading except it does not move.
I have also removed the battery and tried to enter recovery and download mode while inserting the battery.
I have removed the SIM and battery for a few minutes.
when i try to start Zadig, with the phone connected in Download mode, i get "Gadget Serial" as the device connected. I used to get "Samsung USB Composite Device"
I have tried many different things and read over the recommended threads on this forum. I think i need a bit more pointing in the right direction.
I really hope somebody can help me. I am very worried that i may have bricked it.
Thank you.
Try this:
This feature is great for people who
a) Have a bad KIES flash
b) Stuff up their phone somehow
c) Accidentally flash something dodgy via ODIN
d) Some other random occurence
To test this feature you just need to start with your phone turned off... Best way to be sure is to remove the battery.
Then
1. Put battery back in
2. Press and hold Volume Up + Home Key
3. Continue holding those buttons and then press and hold power button.
4. When you see the logo pop up release power button ONLY
5. Keep holding two buttons from step 2 until you enter recovery mode.
I hope this helps?
Also have you tried everything on this thread:
http://forum.xda-developers.com/showthread.php?t=1134975
akash6969 said:
Try this:
This feature is great for people who
a) Have a bad KIES flash
b) Stuff up their phone somehow
c) Accidentally flash something dodgy via ODIN
d) Some other random occurence
To test this feature you just need to start with your phone turned off... Best way to be sure is to remove the battery.
Then
1. Put battery back in
2. Press and hold Volume Up + Home Key
3. Continue holding those buttons and then press and hold power button.
4. When you see the logo pop up release power button ONLY
5. Keep holding two buttons from step 2 until you enter recovery mode.
I hope this helps?
Also have you tried everything on this thread:
http://forum.xda-developers.com/showthread.php?t=1134975
Click to expand...
Click to collapse
I hadn't seen that thread, but i have gone over tons of them Thanks for reply.
I eventually got Odin to detect it and I tried this - http://forum.xda-developers.com/showthread.php?t=1544487
It came up red and said failed.
I closed odin and disconnected the phone. Now i can't even turn it on.. Nothing. I am hoping the battery died, and it's a coincidence..
No response at all to any buttons... I haven't done anything else.
If i can get it to power up again, i'll try those tips.
Tomato_Jam said:
I hadn't seen that thread, but i have gone over tons of them Thanks for reply.
I eventually got Odin to detect it and I tried this - http://forum.xda-developers.com/showthread.php?t=1544487
It came up red and said failed.
I closed odin and disconnected the phone. Now i can't even turn it on.. Nothing. I am hoping the battery died, and it's a coincidence..
No response at all to any buttons... I haven't done anything else.
If i can get it to power up again, i'll try those tips.
Click to expand...
Click to collapse
Ok, Don't worry, Charge your phone battery to 100%, leave over night. ( keep charger connected to your phone overnight)
Best to have a fully charged battery in these situations!
Keep calm, and read and prepare what you want to do next.. Don't try everything in a frantic effort to get your phone started again.
I know it's difficult, but there are lots of threads on how to rectify most problems.
I wish you Good luck!!
sorry to ask some stupid question, but can u make sure what versiom ur fone is?
is it i9000?, or i9001 or i9003? or korean anycall? as far as i know, flashing i9000 ROM to i9003 will hardbrick da device.
Sent from my GT-I9000 using xda premium
akash6969 said:
Ok, Don't worry, Charge your phone battery to 100%, leave over night. ( keep charger connected to your phone overnight)
Best to have a fully charged battery in these situations!
Keep calm, and read and prepare what you want to do next.. Don't try everything in a frantic effort to get your phone started again.
I know it's difficult, but there are lots of threads on how to rectify most problems.
I wish you Good luck!!
Click to expand...
Click to collapse
Thanks.
This is a disaster. I tried to power it on to any mode there before i saw your post.
I needed to update the phone, because an app i needed for studying was only available on Android 4+.
Now no phone..
I saw a few threads, i hope after i leave it overnight i'll be able to power it.
If not, probably a JIG?
I don't fancy making one, but if i have to, i guess i'll give it a try. I don't think i could wait a week or more for a premade one to be delivered.
Anyway, for now, i'll keep my fingers crossed.
Thanks for help/tips and reply.
I'll post back tomorrow, hopefully with some better news.
Tomato_Jam said:
Thanks.
This is a disaster. I tried to power it on to any mode there before i saw your post.
I needed to update the phone, because an app i needed for studying was only available on Android 4+.
Now no phone..
I saw a few threads, i hope after i leave it overnight i'll be able to power it.
If not, probably a JIG?
I don't fancy making one, but if i have to, i guess i'll give it a try. I don't think i could wait a week or more for a premade one to be delivered.
Anyway, for now, i'll keep my fingers crossed.
Thanks for help/tips and reply.
I'll post back tomorrow, hopefully with some better news.
Click to expand...
Click to collapse
Sorry to say, most likely you will need a USB JIg to fix the problem you have. :/
If you linked the correct page when you said you tried to do this- and if I opened the correct page, that takes you to an SII section. Those are SII firmwares, not for the S.
So as compacity said, please clarify what device you have... Whether its an I9000 (galaxysmtd is for the I9000) or an I9100 (the firmware page you linked). If you do have an I9000, then your brick comes from flashing a different device's rom onto the S, which would give this error in Odin beause its incompatible.
In this case, you'd probably need a USB Jig to come out of it.
Try what the others said and hopefully you'll be at least able to enter Download mode before resorting to a jig, but considering your situation, I have to say realistically a jig is your best bet :/
Sent from my GT-P7510 using Tapatalk HD
You need a usb jig. It will get you into download mode. Now you need to flash cf root, which will come with cwm recovery. Recovery mode should work now. If you get computer!phone, then re-flash cf root. Now you should be able to flash CyanogenMod via cwm recovery. Thank if I helped!
Sent from my GT-I9000 using cm10.1
Soryuu said:
Sorry to say, most likely you will need a USB JIg to fix the problem you have. :/
If you linked the correct page when you said you tried to do this- and if I opened the correct page, that takes you to an SII section. Those are SII firmwares, not for the S.
So as compacity said, please clarify what device you have... Whether its an I9000 (galaxysmtd is for the I9000) or an I9100 (the firmware page you linked). If you do have an I9000, then your brick comes from flashing a different device's rom onto the S, which would give this error in Odin beause its incompatible.
In this case, you'd probably need a USB Jig to come out of it.
Try what the others said and hopefully you'll be at least able to enter Download mode before resorting to a jig, but considering your situation, I have to say realistically a jig is your best bet :/
Sent from my GT-P7510 using Tapatalk HD
Click to expand...
Click to collapse
huskyT said:
You need a usb jig. It will get you into download mode. Now you need to flash cf root, which will come with cwm recovery. Recovery mode should work now. If you get computer!phone, then re-flash cf root. Now you should be able to flash CyanogenMod via cwm recovery. Thank if I helped!
Sent from my GT-I9000 using cm10.1
Click to expand...
Click to collapse
Both helped a lot, thanks.
I had to end up bringing the phone to a repair shop
Something i am not inclined to do if i can avoid it. Especially if i caused it, i would hope i could undo it. But because i need a jig, and i wouldn't have time to get one or make one before Monday, i had to bring it to someone else.
I am buying the materials for a jig, and maybe going to buy one also, for future.
@Soryuu - Yep, i linked to the page, so i must have flashed the wrong firmware.
I'm angry with myself because i read everything else carefully. I had been reading all day. I guess i was just tired and thought I had got to the final hurdle. I was careless.
@huskyT - Thanks, will know that for future reference. I have two old Android phones somewhere. One is a Galaxy Europa, and one is an LG (not sure what model). Both are borked in some way, but i could probably use them for practice. I think the Galaxy Europa is flashed badly. Not by me. (Thankfully).
Tomato_Jam said:
Both helped a lot, thanks.
I had to end up bringing the phone to a repair shop
Something i am not inclined to do if i can avoid it. Especially if i caused it, i would hope i could undo it. But because i need a jig, and i wouldn't have time to get one or make one before Monday, i had to bring it to someone else.
I am buying the materials for a jig, and maybe going to buy one also, for future.
@Soryuu - Yep, i linked to the page, so i must have flashed the wrong firmware.
I'm angry with myself because i read everything else carefully. I had been reading all day. I guess i was just tired and thought I had got to the final hurdle. I was careless.
@huskyT - Thanks, will know that for future reference. I have two old Android phones somewhere. One is a Galaxy Europa, and one is an LG (not sure what model). Both are borked in some way, but i could probably use them for practice. I think the Galaxy Europa is flashed badly. Not by me. (Thankfully).
Click to expand...
Click to collapse
Don't stress mate, we all have bad days, we all make mistakes
Sent from my GT-P7510 using Tapatalk HD
Well....
I would have been quicker if i had ordered a jig and done it myself.. (Worth mentioning, i had told guy in phone shop what happened, and about the required "jig")
I collected my phone from the shop today, after a week, and i was told "Your phone is f*****d". To which i replied, "what? are you sure, i mean, i have only flashed it with SGS2 firmware, i'm under the impression it is very hard to break/brick, if i have a jig."
He told me, "Nope, it's beyond repair, it won't work. If you want, i can use the screen and other parts, i'll buy it off you for €40"
No thanks.
So now i am on the lookout for a premade jig. Does anybody know where i can buy one?
I meant to last week, but things happened, and without a phone i was running around a bit...
I'm going to check ebay, but if somebody could recommend somebody reliable, i'd prefer that. Thanks.
I bought it from ebay, no problem...but just saw a couple of minutes ago that also on amazon germany these jigs are offered now/in the meantime....
rodman01 said:
I bought it from ebay, no problem...but just saw a couple of minutes ago that also on amazon germany these jigs are offered now/in the meantime....
Click to expand...
Click to collapse
Thanks.
I bought a jig, and it arrived today. Have phone in charger.
Do i just plug the jig in?
Or do i also do the three button press?
The screen is completely black, and nothing appears on it.
only plug the jig in, thats all... phone will start in download mode of its own. :fingers-crossed: :fingers-crossed:
rodman01 said:
only plug the jig in, thats all... phone will start in download mode of its own. :fingers-crossed: :fingers-crossed:
Click to expand...
Click to collapse
Thanks, going to leave it charging for a little longer, and try it.
If it doesn't work, would a motherboard for the Samsung Galaxy S be easy to replace? I have found one unlocked for €25.
EDIT
Found a tear down video here - http://www.youtube.com/watch?v=vxPWsLd05F4
yes thats not so difficult...only thing a bit complicated is to open the back or middle cover...but there are a few movies on youtupe where you can see how it can be opened and dismounted....btw for the first try with the jig battery has not to be that full...only if it starts in download mode and you can flash it via odin I would recommend to charge it complete.
rodman01 said:
yes thats not so difficult...only thing a bit complicated is to open the back or middle cover...but there are a few movies on youtupe where you can see how it can be opened and dismounted....btw for the first try with the jig battery has not to be that full...only if it starts in download mode and you can flash it via odin I would recommend to charge it complete.
Click to expand...
Click to collapse
Thanks again.
I am after removing it from the charger, and inserted the jig. It's in about 30 seconds now, and nothing is happening..
that sounds not good...ususaly it takes only a few seconds or perhaps a minute till it starts to download mode....sorry for no better news....
rodman01 said:
that sounds not good...ususaly it takes only a few seconds or perhaps a minute till it starts to download mode....sorry for no better news....
Click to expand...
Click to collapse
What seems to have happened, is i tried to flash it with SGS2 rom. So is it unbrickable?
I am not sure but I think that minimum the bootloader is damaged...there is one more possibility: to repair it via jtag...but for this you have to find someone, who ones one and can repair it....some of the guys don't take much money for such a repair, but with transport costs ets...perhaps it would be cheaper and faster if you take the new mainboard you mentioned.
I have the feeling I'm going to get repetitive here guys, but I've been reading the troubleshooting threads for over an hour and couldn't find an answer to help me.
Last saturday I was to lazy to move from the couch, so I watched as my S3 Mini ran out of battery. I got the "phone is turning off" screen as usual. Later I went to bed, but as I needed my alarm to go off in the morning I tried turning it on again, and nothing* happened. Plugged it on the wall, nothing*. Replaced the battery, nothing*. Gave it a good half hour plugged, and as you can guess, nothing*.
* when I say nothing, I mean it won't light up, won't vibrate, won't wink for me, won't load any kind of error, it's actually just like if you were trying to turn on a phone without any battery connected, no grasp of life comes from its poor soul.
The only moment I could see some action on the device is when I tried connecting it on the PC a few hours ago, as it installed drivers to Windows. Right after installing the drivers however, it won't show in the file explorer. I've tried to detect it with a few development tools such as ORT and Odin and there was no sucess either. Download or Recover mode will not work as well.
One thing I think worth mentioning, is that ever since I rooted it a couple of years ago, whenever I tried to recharge it while it was off, the standard "green charging battery" would never appear. What would appear on the screen was a freezed loading icon (the one that keeps roling again and again, but frozen). This particular issue never came off, even reseting it or installing new ROMs.
I always used Maclaw's, some of the latest 4.x, because I tought the 5.x was to heavy for the s3 minis.
I've read some about USB JIGs and stuff, but what makes me very curious is what the heck?! The phone was working just fine, the battery runs out and I have a brick? Is this possible? Can anyone tell me any work around?
I apologize for possible grammar mistakes.
ScrewedImei said:
I have the feeling I'm going to get repetitive here guys, but I've been reading the troubleshooting threads for over an hour and couldn't find an answer to help me.
Last saturday I was to lazy to move from the couch, so I watched as my S3 Mini ran out of battery. I got the "phone is turning off" screen as usual. Later I went to bed, but as I needed my alarm to go off in the morning I tried turning it on again, and nothing* happened. Plugged it on the wall, nothing*. Replaced the battery, nothing*. Gave it a good half hour plugged, and as you can guess, nothing*.
* when I say nothing, I mean it won't light up, won't vibrate, won't wink for me, won't load any kind of error, it's actually just like if you were trying to turn on a phone without any battery connected, no grasp of life comes from its poor soul.
The only moment I could see some action on the device is when I tried connecting it on the PC a few hours ago, as it installed drivers to Windows. Right after installing the drivers however, it won't show in the file explorer. I've tried to detect it with a few development tools such as ORT and Odin and there was no sucess either. Download or Recover mode will not work as well.
One thing I think worth mentioning, is that ever since I rooted it a couple of years ago, whenever I tried to recharge it while it was off, the standard "green charging battery" would never appear. What would appear on the screen was a freezed loading icon (the one that keeps roling again and again, but frozen). This particular issue never came off, even reseting it or installing new ROMs.
I always used Maclaw's, some of the latest 4.x, because I tought the 5.x was to heavy for the s3 minis.
I've read some about USB JIGs and stuff, but what makes me very curious is what the heck?! The phone was working just fine, the battery runs out and I have a brick? Is this possible? Can anyone tell me any work around?
I apologize for possible grammar mistakes.
Click to expand...
Click to collapse
try to plug in the phone into charger & leave it there like 20 mins or more. battery loads then.
then try access samsung download mode, if you cant the phone is probably useless (brick for ever) because itslike mthe last standing thing.
& sorry i say that but thats typically samsung behaviuor. there allways this kind of threads in the samsung forums of xda... other manufacturer can mostly be restored or atleast you know what make it dead.
Exactly the same problems happening to me.
This is my thread:
http://forum.xda-developers.com/galaxy-s3-mini/help/sgs3-mini-dead-t3085031
Can you try to follow what appears on this link? (I can't by now because my PC is broken)
I think won't do nothing because you won't be able to access to the recovery mode on android, as me, but to try...
http://forum.xda-developers.com/showthread.php?t=1840030
bejunk said:
try to plug in the phone into charger & leave it there like 20 mins or more. battery loads then.
then try access samsung download mode, if you cant the phone is probably useless (brick for ever) because itslike mthe last standing thing.
& sorry i say that but thats typically samsung behaviuor. there allways this kind of threads in the samsung forums of xda... other manufacturer can mostly be restored or atleast you know what make it dead.
Click to expand...
Click to collapse
Hi there,
Thank you for your interest but I have passed this point already. Tried a brand new battery I had laying down in the drawer (which was fully charged with an universal charger) and there is no answer to any attempt of turning it on. Via recovery, download or normal boot.
CrashOverride93 said:
Exactly the same problems happening to me.
This is my thread:
http://forum.xda-developers.com/galaxy-s3-mini/help/sgs3-mini-dead-t3085031
Can you try to follow what appears on this link? (I can't by now because my PC is broken)
I think won't do nothing because you won't be able to access to the recovery mode on android, as me, but to try...
http://forum.xda-developers.com/showthread.php?t=1840030
Click to expand...
Click to collapse
Hello there,
I'm sorry to hear I'm not the only one affected by this bug (lets call it a bug). This shows there is a lack of concern from Samsung on dealing with this issues, and thus we see that old programmed obsolescence.
I will try that later on the weekend, and I come back here with an report.
Cheers
ScrewedImei said:
Hi there,
Thank you for your interest but I have passed this point already. Tried a brand new battery I had laying down in the drawer (which was fully charged with an universal charger) and there is no answer to any attempt of turning it on. Via recovery, download or normal boot.
Hello there,
I'm sorry to hear I'm not the only one affected by this bug (lets call it a bug). This shows there is a lack of concern from Samsung on dealing with this issues, and thus we see that old programmed obsolescence.
I will try that later on the weekend, and I come back here with an report.
Cheers
Click to expand...
Click to collapse
this guide useless for you. how u want flash things with odin if u cant enter download mode at all??
im really sorry for you that this phone is dead. just can give you 1 advice, dont buy samsung in future.
I have been repaired my phone successfully!!!
I just needed to change two capacitors on its motherboard, and that's it.
Here the video where I have found the info and how to do that. It's in Spanish but easy to understand for you I think. But if you need some help, send me a PM.
can you take a picture from the location of the 2 capasitors and the types of it
Hi everyone.
I have some news. It took me a while but I followed CrashOverride93's advice on that video. It actually solved one issue, as I now can turn it on, but now I have a second problem, I'm stuck on a boot loop, with acess to Download mode ONLY. No recovery.
Considering where my issue started, and where I am now, I have tried the following:
- Flashed via Odin stock ROM, kernel;
- flashed Wipe;
- flashed PARAM;
- three button combo.
So far I couldn't get it pass the boot loop. Any thoughts?