Hi,
I want to change the baseband to check if I can get better audio quality.
I used GetRIL. It appears 4 options:
V11b
LG-P970-V20o
LG-P970-V20n-Zeus v6.28
CM7
I have V11b but the baseband doesn't match. The only that mach is LG-P970-V20n-Zeus v6.28. But when I change to that baseband, it asks for my SIM securty passcode the first time, like it should. But after a little bit, it asks again, like in a loop.
Can anyone help me why is this? And which baseband is better (CM7 (temasek))
Thanks
Cm7 only working with v11b RIL. So you need a baseband from v10-v11 rom
The baseband of a v10-v11 rom is 20110707
EDIT: The temasek's cm7 rom is for the optimus x2. You dont use boype's rom? Because the voice sound quality is bad in all cm7. Baseband will help a bit but your voice will still bad. Test new boype fix, apparently the voice call is much better than before!
Thanks, I didn't know that.
I will try his next release
Mini Franki said:
EDIT: The temasek's cm7 rom is for the optimus x2. You dont use boype's rom? Because the voice sound quality is bad in all cm7. Baseband will help a bit but your voice will still bad. Test new boype fix, apparently the voice call is much better than before!
Click to expand...
Click to collapse
AFAIK temasek has one kang for O2x and another kang for OB(and other phones too), its not an exclusive unofficial build.
Sent from my LG-E739 using xda app-developers app
Related
Excuse me guys im having problems with the vcr of my milestone after flashing CM7 everything works perfectly but the camera doesnt record audio, only the video.
I would appreciatte a lot your help.
P/S. if this thread doesnt belong here please administers help me change it.
Bye
Which ver. of CM7 you are using?
Did it happend in other ROMs?
same here
i use cm7 posted by kabaldan on my milestone 1,
i lost my baseband and bluetooth address the same time...
also my camera is not functioning right... any solution?
Im using cm7 7.1.1 kang and yes it happened in other rom of cm 7 think it was 7.0.3
kells108 said:
Im using cm7 7.1.1 kang and yes it happened in other rom of cm 7 think it was 7.0.3
Click to expand...
Click to collapse
so what do you think can be the problem?? is it the version? what baseband i should be using?
With the latest cm7 my camera freeze after taking one picture even if I set it to lower res. cm7 has a bug with the highest res setting I replaced the camera app with the miui camera app http://forum.xda-developers.com/showpost.php?p=18838041&postcount=6159
Hi Guys,
I'm currently running the lastest CM Nightly and have never changed Baseband or Kernel.
The question is should i? and is there a better rom to be using?
Hi!
I believe you've got a good ROM now. The latest CM nightly is pretty good I think so there is no need to change that. (Although, you could try Temaseks CM7 KANG, but that's just my opinion , link in signature btw)
BB is another story though. You should ask yourself: Do I have good signal and call quality? If so, then there's no need to change it. At least I wouldn't change it. What I would try to change is your RIL (if it's necessary though). Download the GetRIL app on the market and let it check if your RIL and BB match. If they match then keep it that way . If not change it using that app.
Kernels on the other hand are optional. If you want to overclock your CPU, or if you want a ramhack then you should flash a kernel. Right now I believe you've got stock CM kernel on your phone, which is pretty good, but not the best. Take a look at the ETaNa Kernel thread, (link in signature) There you'll find more information about what this kernel does with your phone.
Oh and one more thing, you don't HAVE TO change your rom etc. I mean, it's not like we're forcing you to change it right? When you're happy with what you have right now, why don't you keep it like that? But, it's your choice obviously
mness90 said:
Hi Guys,
I'm currently running the lastest CM Nightly and have never changed Baseband or Kernel.
The question is should i? and is there a better rom to be using?
Click to expand...
Click to collapse
Hello I will always recommend you try if you want to flash the baseband 1120 greatly enhances the quality of the call!
Pascalone19 said:
Hello I will always recommend you try if you want to flash the baseband 1120 greatly enhances the quality of the call!
Click to expand...
Click to collapse
cheers guys, where can i find the latest basebands as my call & signal quality isn't great
I think the first thing you should try (also because it's the easiest thing to do) is to get "GetRIL" app from gmarket or gplay or whatever it's called now and see if your RIL and BB match. If they don't, get the matching RIL and see if that has improved quality. If it has, great, no further action necessary... if it hasn't then you can proceed to experimenting with different BB
mness90 said:
cheers guys, where can i find the latest basebands as my call & signal quality isn't great
Click to expand...
Click to collapse
Here you go:
http://forum.xda-developers.com/showthread.php?t=1500443
Here the baseband see real improvements if known and remembered as they told others to find the right GetRil with RIL.
If you have been good press thanks.
Thank you!
Pascalone19 said:
Here you go:
http://forum.xda-developers.com/showthread.php?t=1500443
Here the baseband see real improvements if known and remembered as they told others to find the right GetRil with RIL.
If you have been good press thanks.
Thank you!
Click to expand...
Click to collapse
Hi mate,
i have flashed this baseband but am only now recieving G connecting instead of H/3G
mness90 said:
Hi mate,
i have flashed this baseband but am only now recieving G connecting instead of H/3G
Click to expand...
Click to collapse
Have you installed the corresponding RIL, which is located in the thread?
mness90 said:
Hi mate,
i have flashed this baseband but am only now recieving G connecting instead of H/3G
Click to expand...
Click to collapse
Also, not every BB works perfectly on every phone, country and provider... So yeah, as said before, first try a matching RIL and then look if you connection improves...
i've got the getril app and its showing that i dont have matching ril and bb but when i downloaded it to be matching and it actually caused me to drop more calls and have other problems,
restored so they arent matching but im getting better reception and generally internet works most of the time.
so my question whats the point of them both supposed to be matching?
LG 2x
Carphone warehouse open UK
unlocked
current ril 0218 (V10b, Europe)
current BB 1035.21_20111120
the app says i should get ril 1120 (v20l)
anyone have any better combo suggestions?
mez90 said:
i've got the getril app and its showing that i dont have matching ril and bb but when i downloaded it to be matching and it actually caused me to drop more calls and have other problems,
restored so they arent matching but im getting better reception and generally internet works most of the time.
so my question whats the point of them both supposed to be matching?
LG 2x
Carphone warehouse open UK
unlocked
current ril 0218 (V10b, Europe)
current BB 1035.21_20111120
the app says i should get ril 1120 (v20l)
anyone have any better combo suggestions?
Click to expand...
Click to collapse
I suggest you just put that in. Nothing will gonna happen. If its worse than before you can put old RIL back anytime.
mez90 said:
i've got the getril app and its showing that i dont have matching ril and bb but when i downloaded it to be matching and it actually caused me to drop more calls and have other problems,
restored so they arent matching but im getting better reception and generally internet works most of the time.
so my question whats the point of them both supposed to be matching?
LG 2x
Carphone warehouse open UK
unlocked
current ril 0218 (V10b, Europe)
current BB 1035.21_20111120
the app says i should get ril 1120 (v20l)
anyone have any better combo suggestions?
Click to expand...
Click to collapse
In the post that I have posted for the baseband are also the RIL to flash!
So, did you try to put this new RIL? Any improvements?
Like SP1996AC and I said, you should have started by changing only the RIL. This is the easiest of the operations and could have fixed your problem.
Like they say in America, you start by picking the low hanging fruit first.
You climbed the tree and found out that the fruit on the top wasn't good... now you have to climb down again and try the other fruit.
jordantr said:
I suggest you just put that in. Nothing will gonna happen. If its worse than before you can put old RIL back anytime.
Click to expand...
Click to collapse
Thanks for the reply. I did try the suggested rail but it was worse which is why I went back to a mismatch. I will try the other combinations but at the moment its working OK so might stick to this until the weekend.
Thanks
Please help
I put cm7 temasek on my p990, but i cant mach my baseband and ril... I have 0521 bb?
Use any v10 ril.
decodeSA said:
Please help
I put cm7 temasek on my p990, but i cant mach my baseband and ril... I have 0521 bb?
Click to expand...
Click to collapse
You cannot match 521 on CM, that's correct.
Please read the FAQ here: http://forum.xda-developers.com/showthread.php?t=1658047
When I flashed Temasek, my network signal was very poor and oscilative. The RIL recommended by GetRIL was horrible too, I had to test manually each RIL until I find a good one.
As it depends on your country and carrier, you'll probably have to do the same.
cool.guy said:
When I flashed Temasek, my network signal was very poor and oscilative. The RIL recommended by GetRIL was horrible too, I had to test manually each RIL until I find a good one.
As it depends on your country and carrier, you'll probably have to do the same.
Click to expand...
Click to collapse
which one do you use now, my signal and call quality seem good, better then it was on stock rom... But my battery life isn't that great, i don't now is that related to bb and ril?
Would be great if RC makes the next nightlies with the oficial p990 rill. So all problems are gone (i hope).
If thats done i will install cm10, dont want any bug with the wierd rill or bb.
I realy hope he is gone do that.
Thx, i dont know realy if it improves battery life or some other things if he uses the oficial rill. But in my opinion looks like a good idea
Nobody knows?
I just flashed the latest CM10 nightly and Getril is telling me I have no RIL at all.
do-not-touch-ril-in-CM10
RIL matching is not needed in CM10. Getril say you have no RIL because an RC "protection" to avoid RIL overwriting.
Leave it as is (and sometimes use search function on the forum)
reggiexp said:
Would be great if RC makes the next nightlies with the oficial p990 rill. So all problems are gone (i hope).
If thats done i will install cm10, dont want any bug with the wierd rill or bb.
I realy hope he is gone do that.
Thx, i dont know realy if it improves battery life or some other things if he uses the oficial rill. But in my opinion looks like a good idea
Click to expand...
Click to collapse
Why did you start a new thread instead of asking in the user thread?
http://forum.xda-developers.com/showthread.php?t=1964241
reggiexp said:
Nobody knows?
Click to expand...
Click to collapse
We'll see that once the P990 got the official ICS release and the kernel source code drops.
tonyp said:
We'll see that once the P990 got the official ICS release and the kernel source code drops.
Click to expand...
Click to collapse
Thx tony
I had upgraded to CM10, but after encountering the audio bug I returned to CM7 and later ICS leak. However I still have problems with the audio in calls. After the CM10 upgrade should I update the RIL and BB again when trying to use CM7?
mark.baas said:
I had upgraded to CM10, but after encountering the audio bug I returned to CM7 and later ICS leak. However I still have problems with the audio in calls. After the CM10 upgrade should I update the RIL and BB again when trying to use CM7?
Click to expand...
Click to collapse
Should be almost impossible I think! ICS leak has the audio bug too so that's normal, but CM7 shouldn't have it. Did you format system before installing CM7? Baseband shouldn't matter! I went back to CM7 because I had the bug so many times on CM10 and ICS leak. On CM7, I can use all basebands.
Could it be you updated your RIL manually in CM7? You shouldn't. CM7 works only well with v10 RIL's, like the one which came with CM7 (RIL 218). Im using RIL0725 v10d.
x_justin said:
Should be almost impossible I think! ICS leak has the audio bug too so that's normal, but CM7 shouldn't have it. Did you format system before installing CM7? Baseband shouldn't matter! I went back to CM7 because I had the bug so many times on CM10 and ICS leak. On CM7, I can use all basebands.
Could it be you updated your RIL manually in CM7? You shouldn't. CM7 works only well with v10 RIL's, like the one which came with CM7 (RIL 218). Im using RIL0725 v10d.
Click to expand...
Click to collapse
Ahh, does the ICS leak also have the audio bug?! Then perhaps I was mistaken, I one time had audio problems on CM7, but after redialing it was fine, however with ICS/CM10 I have to restart.
The ICS leak don't have the audio bug...
maharu567 said:
The ICS leak don't have the audio bug...
Click to expand...
Click to collapse
Yes it does...switched back to Gueste2X because of that...
wwewwf996 said:
Yes it does...switched back to Gueste2X because of that...
Click to expand...
Click to collapse
I can confirm that. I install a leak rom, but everyone trying to call me got a heavy static noise.
Easy... easy... there's the flashable zip ICS leak which uses a SU660 based kernel that supposedly has the audio bug fixed, but probably hasn't, and there's the ICS leak that you have to flash with NVflash that completely rearranges your partitions and whatnot... I would say the latter doesn't have the audio bug.
LarsPT said:
Easy... easy... there's the flashable zip ICS leak which uses a SU660 based kernel that supposedly has the audio bug fixed, but probably hasn't, and there's the ICS leak that you have to flash with NVflash that completely rearranges your partitions and whatnot... I would say the latter doesn't have the audio bug.
Click to expand...
Click to collapse
This is the one I used: harsh-v28E-P990-vlite-v10.11.zip
This one still had the audio bug?
x_justin said:
Could it be you updated your RIL manually in CM7? You shouldn't. CM7 works only well with v10 RIL's, like the one which came with CM7 (RIL 218). Im using RIL0725 v10d.
Click to expand...
Click to collapse
That is totally wrong. With CM7 you can use nearly any BB/Ril Combination that fits best to your Country/Provider.
Only CM10's Ril should not be changed. You will loose Reception immediately.
Sent from my LG-P990 using XDA Premium App
vlite ICS leak (non-nvflash) has audiobug, for it share one thing with CM10 (dependance on SU660 kernel sources).
FULL Install of ICS - nvflash - does not have any in-call audio bugs.
zerocoolriddler said:
That is totally wrong. With CM7 you can use nearly any BB/Ril Combination that fits best to your Country/Provider.
Only CM10's Ril should not be changed. You will loose Reception immediately.
Click to expand...
Click to collapse
Hey man... don't hand out misinformation... only V10 based RILs work on CM7 (believe me, I've tried). I had a v20 BB with a v10 RIL (in fact I just kept the RIL that came with CM7) and it was working great... so I actually agree with our other mate said... just don't touch the RIL and experiment with BB first (if you are on CM).
---------- Post added at 12:49 PM ---------- Previous post was at 12:47 PM ----------
mark.baas said:
This is the one I used: harsh-v28E-P990-vlite-v10.11.zip
This one still had the audio bug?
Click to expand...
Click to collapse
I believe so. Only "true" ICS leak doesn't have it, because the others use the kernel from SU660.
I dont have problem with that... I am now on [CM7][UNOFFICIAL][NOV10] temasek's UNOFFICIAL BUILD 135.4 - FINAL RELEASE and it is working like a charm...
LarsPT said:
Hey man... don't hand out misinformation... only V10 based RILs work on CM7 (believe me, I've tried). I had a v20 BB with a v10 RIL (in fact I just kept the RIL that came with CM7) and it was working great... so I actually agree with our other mate said... just don't touch the RIL and experiment with BB first (if you are on CM).
Click to expand...
Click to collapse
Sorry. I forgot to mention that this only applies if you're on a SU660 BB. On P990 BB you're right. I'm on BB420 and tried different Ril's without Problems. Ril 218, 512, 1020, 725, 420 ... without Issues.
Sent from my LG-P990 using XDA Premium App
LarsPT said:
Hey man... don't hand out misinformation... only V10 based RILs work on CM7 (believe me, I've tried). I had a v20 BB with a v10 RIL (in fact I just kept the RIL that came with CM7) and it was working great... so I actually agree with our other mate said... just don't touch the RIL and experiment with BB first (if you are on CM).
---------- Post added at 12:49 PM ---------- Previous post was at 12:47 PM ----------
I believe so. Only "true" ICS leak doesn't have it, because the others use the kernel from SU660.
Click to expand...
Click to collapse
1.) the flashable zip indeed does have the audio bug. Unfortunately I read a couple reports of the issue being present in the NVFlash version as well - which would really suck hard.
2.) if you're on CM7 I suggest to DO touch the RIL. See my stickyed thread (link in my sig) for further details.
zerocoolriddler said:
That is totally wrong. With CM7 you can use nearly any BB/Ril Combination that fits best to your Country/Provider.
Only CM10's Ril should not be changed. You will loose Reception immediately.
Sent from my LG-P990 using XDA Premium App
Click to expand...
Click to collapse
It's true, CM7 only can handle Froyo based RIL's. There are a lot, I agree, but they're all v10 based (because v10 is froyo for our phone). So don't say it's not true, you simply can't use v20 RIL's with all functions working.