Database Develop

[Q] help me please.phone setup wizard force close

i have a rogers canadian captivate.rooted and unlocked.deleated stock tw launcher by mistake and did a hard reset.well on step 4 of the new set up process it says phone setup wizard not responding and askes to force close.and takes me right back to step 1 of set up.i know if i can get to the web and download a launcher than i can open it from notificatio bar. please help.

Can you push stuff through adb?
Sent from my SGH-T959V using XDA App

Juls317 said:
Can you push stuff through adb?
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
Since he just factory reset a stock rom, it isnt set to debugging mode, so adb isnt an option...

Good point...hmmmmmm
Sent from my SGH-T959V using XDA App

Because you cant push a launcher or get into any settings menu, my only suggestion would be to flash a new rom. And assuming that the rom you just flashed (being completely stock), you wont have the 3 button combo although I suggest you try it. (Im not sure about the combos for 2.2 roms).
If you cant get into recovery/download through any method, my next suggestion is to buy/build a JIG and force your device into download mode, by which you can use ODIN to flash a rom.
You can make a jig for about a dollar or buy one for about 10. (Best purchase i made). Just take a look around the forums for more info on this.

yes i can get into where it says reboot system now,reinstall packages delete data ya know. not much experiance

and i can still get the usb modes when i plug in usb. kies media player mass storage.just an amature

Not sure if it would work...but odin3 v1.0 had a option for enable debug .could he just do that? Then adb push /system/app/launcher.apk? See pic
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SGH-I897 using XDA Premium App

need more suggestions.paid 500 canadian with no contract.might as well of flushed it down the toilet

There is a Canadian Odin one click somewhere. Look harder.

Canadian one click using Heimdall not Odin. Good news is Heimdall is cross platform and can be used on PC, Mac, and Linux. Read the thread and the instructions are in the OP. Good Luck!
Here's the link http://forum.xda-developers.com/showthread.php?t=1191094

So give me the link
Sent from my GT-P1000R using XDA App

I have the heimdall ready and in download mode on captivate.ok where it says load package i hit browse and it takes me to all the files in heimdall but i dont know what to choose.this is how much of an ameture i am.i cant even flash a rom.pleas help me
Sent from my GT-P1000R using XDA App

Canadian odin one click? Need a link.ill try this one also
Sent from my GT-P1000R using XDA App

Can't you bypass phone setup? Maybe this video will help.
http://www.youtube.com/watch?v=L5XjF6sPef4&feature=youtube_gdata_player
Sent from my SAMSUNG-SGH-I896 using XDA App

http://forum.xda-developers.com/showpost.php?p=16098171&postcount=5
That's where the download is for the package for Canadian stock. I am not at my pc to walk you through where the package goes on Heimdall.
Sent from my blazing fast Captivate running Continuum GB ROM using Tapatalk Pro

thankyou soooooooo much. i decided to try your odin flash and worked very well.i cant believe how easy it was.only problem is i cant connect to samsung kies.but i dont care.who needs it for firmware update when i know how to flash roms now. again thank you.saved me alot of cash

jamesrfraser said:
thankyou soooooooo much. i decided to try your odin flash and worked very well.i cant believe how easy it was.only problem is i cant connect to samsung kies.but i dont care.who needs it for firmware update when i know how to flash roms now. again thank you.saved me alot of cash
Click to expand...
Click to collapse
That's because Kies isn't supported in the US and you don't need it anyway! Glad to hear you're up and running again.

worked great thankyou.except ended up with the at&t version.thats ok.now i know how to flash a rom.thanks again

jamesrfraser said:
worked great thankyou.except ended up with the at&t version.thats ok.now i know how to flash a rom.thanks again
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=16098171&postcount=5
That's the link for the Canadian Stock Heimdall package.
Be careful when flashing ROMS, be certain to read the instructions carefully and read the thread too, usually you will find all the information you need, any problems to expect and how to recover from these problems. Good Luck and happy flashing!

[q] usb/unknown

Sorry for my englishg in advance... im from argentina.
I have a i9000b but maybe you can help me...
The thing is i was flashing a new kernel via CWM and something went wrong.
Now the phone doesnt start... get stock in the kernel logo.
I can get in at download mode... by pressing volume - home and power buttons.
The problems comes.. when windows doesnt recognise my phone... says usb unknown divice.. and USB\VID_0000&PID_0000\
Is anyway to force drivers?... i saw that maybe with GALAXY NEXUS driver would work.. casue my kernel was ported from that divice... couldnt.. force the drivers...
Anyone could help me please?
I wil be greatfull!
Thanks
edit: i cant enter in recovery mod

Installing android sdk will install nexus drivers.
Sent from my SGH-T959 using XDA

trailblazerz11 said:
Installing android sdk will install nexus drivers.
Sent from my SGH-T959 using XDA
Click to expand...
Click to collapse
yes but i get not hardware id by windows... so i need to force the driver by editing de .inf
PD: i made a jig today is working... tried in a i9100... but not working on the i9000b stays frozen at the kernet platypus logo!

Usb drivers for galaxy s
http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x86.shtml for 32 bit
http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x64.shtml for 64 bit
Install the right one and reboot.
Put phone in download mode, make sure Kies isnt running and open Odin and now plug in your phone. Does your phone appear at all in Odin?

Same issue!
Hi guys...I`m passing through this same problem...I didn`t fixed my SGS yet...I`ve tried any different drivers (samsung, nexus, heimdall, USBview) anything is working
The bigest issue I think is some deleted or corrupted file into the ICS...cause when I star it up at CWM I`m not abble to do anything...always the same error "E: unknow mount/ storage...format/ restore failed"
My last chance will be next week when I`ll go to take it to a Samsung place.
I`ve read various Android/Samsung forums but anyone can help...It`s a "Non-perfect-brick"
Thanks...and waiting for same holpefull suggestion!
(sorry about my English)

jjuki said:
Usb drivers for galaxy s
Driver-for-Windows-x64.shtml[/url] for 64 bit
Install the right one and reboot.
Put phone in download mode, make sure Kies isnt running and open Odin and now plug in your phone. Does your phone appear at all in Odin?
Click to expand...
Click to collapse
Already tried to force this drivers.. and anything happend... i get error from windows says that is a problem trying to start the hardware (error 10 )
edit: already tried with galaxe nexus drivers... asus transformer drivers.. generic drivers... i9000 drivers... and libusb drivers.... im still getting erro 10 unable to star the divice

Try another usb port. And try on other computer if possible. And read this http://forum.xda-developers.com/showthread.php?t=1347006
Sent from my GT-I9000 using XDA

jjuki said:
Try another usb port. And try on other computer if possible. And read this http://forum.xda-developers.com/showthread.php?t=1347006
Sent from my GT-I9000 using XDA
Click to expand...
Click to collapse
i tryed too i show u what i get.... still not working... notice that im only able to get my device in download mode... but hardware id... is USB/UNKNOWN... so i edit the inf of the driver to be able to install it... (tried with this driver http://www.mediafire.com/?vugbd358l4si4p4 and the sdk nexus one driver)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
edit: i had miui on my phone.. them i flashed ics... them i tried to flash miui again in cwm.. and them the phone crash...

What does Odin say when you plug in the phone? Could you get screenshot of that?
Sent from my GT-I9000 using XDA

jjuki said:
What does Odin say when you plug in the phone? Could you get screenshot of that?
Sent from my GT-I9000 using XDA
Click to expand...
Click to collapse
odin stays like anything is conected to the pc... tomorrow i will atach a screenshoot
http://forum.xda-developers.com/showthread.php?t=1363593
i skip this note i think... so i get my brick "Note: The upgrade process from CM7 to ICS is automatic, but downgrading from ICS to CM7 (or restoring Nandroid) requires flashing twice. Once from ICS and again from CM7's recovery."

any ideas? please!

nexus driver
dark Knight rom is nexus ported . So heard like need to install nexus drivers on pc to detect the phone

Android Bootloader interface (fix)

I don't know if any else is experiencing this, but when I'm in boot loader mode and I plug my device into windows it gives me a error (device cannot start code 10). When this happens I cannot use fast boot at all it will be stuck there waiting for device. So I have a temporary fix:
1.go to device manager while in boot loader
2. Right click on your device in device manager
3. Click uninstall driver.
4. Remove your device from the computers USB.
5.plug it back in and before it automatically installs the drivers go to device manager and right click on Android under your device name and click scan for hardware changes. Now it recognizes my device in the boot loader interface.
I wanted to post this in case anyone else is experiencing this problem.

Never happened to me, but a nice find anyway!

I installed the universal driver and I have no problems.
Sent from my Nexus 4 using xda app-developers app

wilsonlam97 said:
I installed the universal driver and I have no problems.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
You mean the Google USB drivers, then yeah I have it too, but when I check
It says device cannot start code 19, so that temporarily fixes it until you unplug the device and put it back.

Hello all,
Just wondering, but are you using windows XP by any chance?

heat361 said:
You mean the Google USB drivers, then yeah I have it too, but when I check
It says device cannot start code 19, so that temporarily fixes it until you unplug the device and put it back.
Click to expand...
Click to collapse
No I meant the universal drivers.
Sent from my Nexus 4 using xda app-developers app

wilsonlam97 said:
No I meant the universal drivers.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Its been a while since I posted this thread, but I managed to get everything working properly.
As for the guy who posted above I was running windows 7.

heat361 said:
I don't know if any else is experiencing this, but when I'm in boot loader mode and I plug my device into windows it gives me a error (device cannot start code 10). When this happens I cannot use fast boot at all it will be stuck there waiting for device. So I have a temporary fix:
1.go to device manager while in boot loader
2. Right click on your device in device manager
3. Click uninstall driver.
4. Remove your device from the computers USB.
5.plug it back in and before it automatically installs the drivers go to device manager and right click on Android under your device name and click scan for hardware changes. Now it recognizes my device in the boot loader interface.
I wanted to post this in case anyone else is experiencing this problem.
Click to expand...
Click to collapse
You're a lifesaver my friend. Registered for the forums just to thank you

MarkTheSpark said:
You're a lifesaver my friend. Registered for the forums just to thank you
Click to expand...
Click to collapse
No problem and Welcome to the community

Unknown USB Device
Hi, I just installed the ADB Interface Driver but I can't install the Bootloader Interface Driver. In the Device Manager, this shows.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(Unknown USB Device(Configuration Descriptor Request Failed)) I connected my phone tomy laptop whilst it is in recovery mode
Any help would be greatly appreciated! Thanks

[Q] [W8] Problem with fastboot - SOLVED

Hi all, i have a fastboot driver problem. I tryed all, also this, of course. Installed Sony PC Companion and Flashtool but fastboot drivers still doesent work
Here a screen of dev manager
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

EmeraldTimer said:
Hi all, i have a fastboot driver problem. I tryed all, also this, of course. Installed Sony PC Companion and Flashtool but fastboot drivers still doesent work
Here a screen of dev manager
Click to expand...
Click to collapse
I am not know if this will help, but if you r using windows8 then I recommend you to use Windows 7.
I had a problem with my xs, every time I connect it to my win 8 pc, I got a message that my device is malfunction.
Or
Try removing all drivers and then install them again using driver provided with the flash tool.
Sent from my C6602 using xda app-developers app

If you need to install the fastboot drivers try this
First download the latest fastboot drivers from http://www.multiupload.com/BMJ24IL6XY then right click s1 fastboot then click update drivers. After that click browse manually and select the folder where you kept your newly downloaded files and click ok. It will then install the latest drivers
If you can't get into Fastboot mode try this
Turn your phone off and hold the volume up button but DO NOT hold the power button. Then connect the usb cable whilst still holding the up button. Then the led should turn blue.
Also Windows 7 will have less issues with driver installation
Press thanks if I helped.
Sent from my C6603 using xda app-developers app

slyviper1700 said:
If you need to install the fastboot drivers try this
First download the latest fastboot drivers from http://www.multiupload.com/BMJ24IL6XY then right click s1 fastboot then click update drivers. After that click browse manually and select the folder where you kept your newly downloaded files and click ok. It will then install the latest drivers
If you can't get into Fastboot mode try this
Turn your phone off and hold the volume up button but DO NOT hold the power button. Then connect the usb cable whilst still holding the up button. Then the led should turn blue.
Also Windows 7 will have less issues with driver installation
Press thanks if I helped.
Sent from my C6603 using xda app-developers app
Click to expand...
Click to collapse
I cant download ò.ò can you upload me on other sites like mediafire?

You will find all the necessary details on this forum page. http://forum.xda-developers.com/showthread.php?t=1583801
Press thanks if I helped
Sent from my C6603 using xda app-developers app

slyviper1700 said:
You will find all the necessary details on this forum page. http://forum.xda-developers.com/showthread.php?t=1583801
Press thanks if I helped
Sent from my C6603 using xda app-developers app
Click to expand...
Click to collapse
Cant install the usb_driver, i dot know where is the folder that i have to copy to

You right click the driver in device manager, click update and then locate the folder you clicked and then click ok.
Sent from my C6603 using xda app-developers app
---------- Post added at 07:06 AM ---------- Previous post was at 06:56 AM ----------
Also here is a video tutorial
www.youtube.com/watch?v=yRggtyNnxtI
Press thanks if I helped
Sent from my C6603 using xda app-developers app

All Done! thank you!

[Q] ADB not recognized at all?

I have the latest drivers for the HTC One that I got through HTC Sync, however no matter what state my phone is in, ADB is not recognized. My laptop specs are Windows 8.1 and USB 3.0 ports (don't have a choice, how the laptop came and don't want to downgrade just for ADB).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

http://forum.xda-developers.com/showthread.php?t=1583801
Sent from my One using Tapatalk

flomexico said:
http://forum.xda-developers.com/showthread.php?t=1583801
Sent from my One using Tapatalk
Click to expand...
Click to collapse
Thanks for your reply. I managed to get ADB to work, but fastboot doesn't work at all. It says my drivers are up to date and when it gets into fastboot, my computer says my usb device cannot be recognized. Anything else that I could try?

decayer177 said:
Thanks for your reply. I managed to get ADB to work, but fastboot doesn't work at all. It says my drivers are up to date and when it gets into fastboot, my computer says my usb device cannot be recognized. Anything else that I could try?
Click to expand...
Click to collapse
I have heard fastboot will work if you have hboot 1.55

Could you link me to hboot 1.55? I can't find it through searching and wouldn't I need fastboot to even push the update, essentially making it damn near impossible to do in my situation? :/
Sent from my HTC One using xda app-developers app

decayer177 said:
Could you link me to hboot 1.55? I can't find it through searching and wouldn't I need fastboot to even push the update, essentially making it damn near impossible to do in my situation? :/
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Yeah you would need fastboot working to lock your bootloader.
Borrow another PC or can't you downgrade to Win 8?

Didn't know you had to relock for a hboot update, thought that was just for RUU. Anyways, I could use my desktop tomorrow that runs Win8 (NOT 8.1) x64 that also has USB 3.0 (difference is my desktop uses Intel whereas my laptop uses AMD). Would that work?
Sent from my HTC One using xda app-developers app

decayer177 said:
Didn't know you had to relock for a hboot update, thought that was just for RUU. Anyways, I could use my desktop tomorrow that runs Win8 (NOT 8.1) x64 that also has USB 3.0 (difference is my desktop uses Intel whereas my laptop uses AMD). Would that work?
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
You should be ok the only problem you may have is the USB 3 ports
If you are S-ON you have to re-lock to flash the firmware

I'm S-OFF. I'll give it a try and will see if it works after this damn Java final >.>
Sent from my HTC One using xda app-developers app