Related
Guys,
I don't know if this is actually a cure yet, but it seems to have worked on my first attempt.
First the background...
When I first got my Kaiser (UK Orange Tytn II) I was at work, I quickly enabled the wifi and all was well. When I got back home later that day I really struggled to get a connection to my access point at home. I connect to a Cisco aironet in both locations (I know there is a post about cisco extensions but I know that is not my problem as I can and have connected to both APs on at least one occasion with no problem).
After deleting wireless settings and a few soft resets I was able to connect at home. I managed to use that wifi connection all night without a problem. Getting back into the office the next day resulted in the same problems connecting to the office access point.
The AP is visible and is 'Available' but doesn't connect automatically. I tried to establish the connection manually, the phone shows the AP as 'Connecting' but shortly after goes back to 'Available'.
I've tried flashing different roms and radios but to no avail.
Last night I got to thinking that I generally connect to my AP, browse the web, sync mail etc, but I don't switch off the wifi when I am finished. I just let the phone go into standby as that shuts the wifi off anyway. So to try something different last night, I disabled wifi once I had finished.
This morning, when I got into the office, I enabled wifi and for the first time it connected immediately and I'm browsing on it just fine. This leads me to believe that there is a problem when the wifi is enabled and the phone is is standby mode for a considerable length of time and then is woken up in a totally different location.
I'll test again tonight by disabling the wifi before I leave the office and hopefully I'll get an instant connection when I get home.
Any thoughts?
I get the same thing for work and cannt connect even though it says available, and then connected.
Tried your approach but didnt work for me.
bluemamba said:
I get the same thing for work and cannt connect even though it says available, and then connected.
Tried your approach but didnt work for me.
Click to expand...
Click to collapse
Of course that might be due to any number of factors. Have you ever been able to connect at your office?
i've had issues with my orange (uk) tytnII actually wanting to make a GPRS connection whilst connected to WiFi when i try and go online.
I connect at work using a program called Odyssey and eventually got that working yesterday, but had to turn off most other connectivity before it'd actually use the WiFi.
then I was at a pub later on with a free wifi hot spot, but that wouldn't connect despite it being 'available'
YAY!
Well...
I retested my theory. Disabled the wireless before I left the office. Got home, enabled it and I connected with no issues.
So there is a problem with having the wifi on when the phone goes into standby and it then waking up in a totally different location.
I wonder if WM6.1 addresses this. I hope so because although I have a work around, its still a pain in the a$$
I had similar problems on my Wizard... never had anything like that on my Kaiser.
DarkDvr said:
I had similar problems on my Wizard... never had anything like that on my Kaiser.
Click to expand...
Click to collapse
Could you tell me what radio you are using?
foobar1977 said:
Could you tell me what radio you are using?
Click to expand...
Click to collapse
ROM: DualTouch v3 (dutty's v3)
Radio: 1.27.11.31
No problems with it.. no missed calls, calls come through fine when I'm on HSDPA.. no wifi problems so far.
DarkDvr said:
ROM: DualTouch v3 (dutty's v3)
Radio: 1.27.11.31
No problems with it.. no missed calls, calls come through fine when I'm on HSDPA.. no wifi problems so far.
Click to expand...
Click to collapse
Thanks, I might give that a go when I get a chance.
My problem is similiar. If I connect to a certain access point, it will stop working after a minute or so and then not be able connect to that access point or any other one, they are just listed as available. Strange...
Firstly set your wifi power to max.
Secondly, my orange Tytn2 (now dutty v3'd) has never had that problem.
I leave navizon on a lot of the time and thus enter and leave wifi zones frequently with wifi on and my device connects fine to the regular ones I use.
Wi-fi connection
Hi unwired,
I've been surfing this site, but unable to find an answer yet, a newbie that I am. Is there a way to define one network as default? Anytime I want to connect, I have to do it manually, and define settins, rather than just switch it on, connect automatically and fire away. This is how it works on my laptop, or I have to high expectations from the Kaiser?
Thanks in advance.
unwired4 said:
Firstly set your wifi power to max.
Secondly, my orange Tytn2 (now dutty v3'd) has never had that problem.
I leave navizon on a lot of the time and thus enter and leave wifi zones frequently with wifi on and my device connects fine to the regular ones I use.
Click to expand...
Click to collapse
This is nothing to do with power settings, or at least not for me or several other people I have spoken to. Its generally not a problem when the wifi is on, its after the device has gone into suspend.
I'll bet my bottom dollar that if I set the reg hack so the wifi is always on I wont have this problem but I can't deal with the battery drain.
Just this morning I was connected to my office wifi, went for lunch without switching off the wifi first and when I got back I was longer able to connect to the same access point.
I then deleted the settings for the access point, soft reset and I'm connected again (even if I switch to low power).
To say that this pi$$es me off is an understatement, what kind of wireless device cant handle waking up in a different location to the one it went to sleep in!?
foobar1977 said:
This is nothing to do with power settings, or at least not for me or several other people I have spoken to. Its generally not a problem when the wifi is on, its after the device has gone into suspend.
I'll bet my bottom dollar that if I set the reg hack so the wifi is always on I wont have this problem but I can't deal with the battery drain.
Just this morning I was connected to my office wifi, went for lunch without switching off the wifi first and when I got back I was longer able to connect to the same access point.
I then deleted the settings for the access point, soft reset and I'm connected again (even if I switch to low power).
To say that this pi$$es me off is an understatement, what kind of wireless device cant handle waking up in a different location to the one it went to sleep in!?
Click to expand...
Click to collapse
I have had similar problems. I get disco'ed from my AP at home and it won't let me re-connect. Jut keeps asking for the WPA2 key.
I use the same remedy as you. Turn off Wifi Before walking out of range. No amount of Softreset's fix it for me.
Although, some ROM's work better than others. ie Alex's WM6 ROM would not connect at all, the ROM / Radio in my sig are perfect so far.
P.S. This might also be tied to my router, cause a router reset fixes it for me. But i doubt work will let you try that
DaveShaw said:
Although, some ROM's work better than others. ie Alex's WM6 ROM would not connect at all, the ROM / Radio in my sig are perfect so far.
Click to expand...
Click to collapse
Yeah I'm really hoping that this is fixed in WM6.1 which, if your experience is anything to go by, might well be the case. I really wanted to wait for the official 6.1, but I feel a flash of Duttys 6.1 coming on real soon.
I have had my diamond for about 2 weeks now and the wifi worked fine for the first few days I had it. I did a hard reset to fix another problem and then after that the wifi didn't work. I may have changed a setting but I don't remember. I have looked at every setting that there is and I can't figure out everything. I know that there should be wifi working because I use it on my ipod and laptop. I have tried putting my battery to performance, but that didn't work. Any suggestions of what I can do or try?
you tried the usual? restart ur wireless AP/router? delete the connection on ur diamond, try redo it, does it pick up your wireless AP/router?
Does bluetooth work ok? If not, then its a hardware fault and would need to be repaired.
Yes, I have tried your method beany and my bluetooth works, I just tried and it works fine. I can not get wifi anywhere. My house's wifi doesn't work, and at the gym, it doesnt work. No networks at all even show up. I need a solution.
Go to Settings>Connections Tab>Wlan>Power Mode> Slide the slider to the far left (Best performance). Should fix it
happened to me too the first few times, even when holding the phone up to the antenna of the router it wouldn't connect. i don't know why the "best battery" option is even available
Yes, I know that. That was the first thing I ever did. It didn't help. No wifi shows up anywhere. Is there any settings that I may have changed in Network adaptors?
I need something because it is so annoying with no wifi.
same problem here. No Wifi... But Bluetooth works OK
Maybe some radio patch or something??
I really don't know what to do anymore. My Iifi stop working without reason. I saw some topic about it but it seems nobody now how to fix it.
Please, help me.
I have already updated everything, it works randomly if I reset my phone.
Thanks
Does anyone know if this follow scenario is possible?
I want to connect the phone up to my computer via BT or the USB cord, and then the phone will connect via WiFi (802.11b/g) to a wireless router. Can this be done?
Thanks in advance.
wingmanjd said:
Does anyone know if this follow scenario is possible?
I want to connect the phone up to my computer via BT or the USB cord, and then the phone will connect via WiFi (802.11b/g) to a wireless router. Can this be done?
Thanks in advance.
Click to expand...
Click to collapse
Yes. It can be done with a program like wifi internet sharing. I have not used it myself, but NRG has it in his newest rom. You will want to link up with the usb cord because anytime I have wifi and BT going at the same time (internet wifi and BT headphones) there is a conflict. I have also heard that it isn't a great program, but you can find out for yourself. Hope that helps.
wingmanjd said:
Does anyone know if this follow scenario is possible?
I want to connect the phone up to my computer via BT or the USB cord, and then the phone will connect via WiFi (802.11b/g) to a wireless router. Can this be done?
Thanks in advance.
Click to expand...
Click to collapse
Here ya go!
I have to say that it does work. Im using NRG latest Energy rom, july 29, and i can share the internet from my fone to the laptop through wifi and connect the laptop to the internet. basically the fone works like a router... or u can also connect and share internet through usb... it seems to work just a lil bit faster.
I'm not sure how else to explain this. I'm NOT looking to use the cell phone's data plan. I AM looking to use the phone as a usb wireless (802.11b/g) adapter for the computer.
Anything like this?
The Wifi internet sharing is attempting the use of the data plan (no good for my situation).
wingmanjd said:
I'm not sure how else to explain this. I'm NOT looking to use the cell phone's data plan. I AM looking to use the phone as a usb wireless (802.11b/g) adapter for the computer.
Anything like this?
The Wifi internet sharing is attempting the use of the data plan (no good for my situation).
Click to expand...
Click to collapse
use WIFImoster...
its wifi to usb mode is awesome. it will try to pick up a free hotspot first, but you can manually connect to a wpa/wep secured network and then launch it, works like a champ everytime.
edwinh2209 said:
use WIFImoster...
its wifi to usb mode is awesome. it will try to pick up a free hotspot first, but you can manually connect to a wpa/wep secured network and then launch it, works like a champ everytime.
Click to expand...
Click to collapse
Do you mean wifimonster? If so, I don't see a usb mode
wingmanjd said:
Does anyone know if this follow scenario is possible?
I want to connect the phone up to my computer via BT or the USB cord, and then the phone will connect via WiFi (802.11b/g) to a wireless router. Can this be done?
Thanks in advance.
Click to expand...
Click to collapse
Try this: http://forum.xda-developers.com/showthread.php?t=377047
u can always try to "obtain" a copy of wmwifirouter
This is just my opinion. It might be wrong!
If you've a computer that can connect to your cell phone with Bluetooth.
I'm quite sure that the computer must have Wifi function also.
Why you want to do some easiest thing to be much more complicated!
@navi_mapper:
Not always; I've seen some laptops with a Bluetooth only card, a WiFi only card, and Bluetooth/WiFi combo cards.
It likely the purchaser may not have chosen a combo option or the laptop came with Bluetooth only. Worst case, the laptop may have shipped with a legacy WiFi device and is too costly to replace.
Cheers,
TurboX2 said:
u can always try to "obtain" a copy of wmwifirouter
Click to expand...
Click to collapse
Ten cuidado...thin ice on this forum.
navi_mapper said:
This is just my opinion. It might be wrong!
If you've a computer that can connect to your cell phone with Bluetooth.
I'm quite sure that the computer must have Wifi function also.
Why you want to do some easiest thing to be much more complicated!
Click to expand...
Click to collapse
PC Desktops rarely have wifi on the internal mobo. Also, I want as many options as possible with this phone. It's the best yet!
muguly said:
Here ya go!
Click to expand...
Click to collapse
This is perfect. Thanks very much
wingmanjd said:
Ten cuidado...thin ice on this forum.
Click to expand...
Click to collapse
Note that there are early versions of WMWifiRouter (up to V.91, IIRC) still available that were released without encumberance. While it might not be Chainfire's preference, it's not exactly discussing "warez" to use an older version. Granted - the person you're cautioning seems to be insinuating that you get a cracked version...
I recommend paying for it, though - the supported paid version is a lot more reliable (and you can actually uninstall it without borking your network setup). It also offers a very nice USB-to-Wifi interface. I think the free ICSControl offered elsewhere on this forum does the same (USB-to-Wifi), but in my brief experience with that program it was not as reliable as WMWR.
hyachts said:
Note that there are early versions of WMWifiRouter (up to V.91, IIRC) still available that were released without encumberance. While it might not be Chainfire's preference, it's not exactly discussing "warez" to use an older version. Granted - the person you're cautioning seems to be insinuating that you get a cracked version...
I recommend paying for it, though - the supported paid version is a lot more reliable (and you can actually uninstall it without borking your network setup). It also offers a very nice USB-to-Wifi interface. I think the free ICSControl offered elsewhere on this forum does the same (USB-to-Wifi), but in my brief experience with that program it was not as reliable as WMWR.
Click to expand...
Click to collapse
Thanks. Didn't know that about the older versions of WMWR. I may save up for the $30 that it'll drain my treasure horde.
wifi router not seen by some computers
any ideas why wifi router works on some of my computers but not others. I am using it right now, but my computer downstairs does not see it at all. Have same issue at work some computers see the wifi signal some do not. Seems to be a windows security setting? Works great on computers that see it.
Has anyone else tried this app?
Im on tnt lite 4.4 and when I connect my gtab freezes.
I had the app working for a couple minutes at most.
Ive tried different browsers, but nothing, next I might try a different rom
and see if that works.
I have to try and use this app because I dont have root on my mobile yet.
Edit: i changed my rom to G harmony v2.4.
It connects but force closes on me, better then freezing up my tablet though.
Works for about five minutes, sometimes it doesnt want to connect at first either.
Edit: using cyanogenmod 7.0.3 this app works.
Currently connected to my mobile.
No freezing or force closes.
Here is the market description
This is a tablet version of the extremely popular PdaNet software. It allows you to share the Internet access of an Android device with another Android device through Bluetooth. You should install this application on both the tablet and the phone. Then run client mode on a tablet and server mode on a phone. No rooting required. Connection speed should be very fast if your phone has good data service. PdaNet works by setting the web proxy server on your tablet and route web requests to a Bluetooth DUN service. That means only applications that use web connections will work. On Honeycomb devices PdaNet supports Browser, Gmail and Map. For Android 2.2/2.3 devices PdaNet only supports the Browser app. We understand this solution is not ideal but it is really the only way to tether an Android tablet due to OS restrictions. This application is completely free and we hope it will be useful to you.
Is your phone not capable of acting as a WiFi hotspot?
999ping said:
Is your phone not capable of acting as a WiFi hotspot?
Click to expand...
Click to collapse
No its not unfortunately
Using an lg optimus v. With virgin mobile.
999ping said:
Is your phone not capable of acting as a WiFi hotspot?
Click to expand...
Click to collapse
Tethered via WiFi is just one option but I think the whole point was to do it via Bluetooth.
I can't say for sure if BT has a better/stronger connection than WiFi, but it's something I've been yearning to find out.
EL TEJANO said:
Tethered via WiFi is just one option but I think the whole point was to do it via Bluetooth.
I can't say for sure if BT has a better/stronger connection than WiFi, but it's something I've been yearning to find out.
Click to expand...
Click to collapse
I probably wouldn't use this if I could tether over wifi though.
This app is beta and on froyo and gingerbread you can only get internet on
Your browser app.
But it's free and I need to root my mobile.
I've been traveling and dont have a computer right now.
I saw it in the market on my Evo, but NOT on my Gtablet. How can I get it from my not rooted Evo to my rooted Viewsonic GTablet?
Can you backup your apps on your phone?
should be able to put it on your sdcard, then transfer it to your gtablet and install.
Just tried it, it pairs but does not connect via bluetooth. I'm rooted as well. From my understanding android had widespread issues connecting via bluetooth as a server/client to another android device.
Using an Apple or Windows based phone I have no issues.
EL TEJANO said:
Just tried it, it pairs but does not connect via bluetooth. I'm rooted as well. From my understanding android had widespread issues connecting via bluetooth as a server/client to another android device.
Using an Apple or Windows based phone I have no issues.
Click to expand...
Click to collapse
I had the same problem, i would try it a couple of times to get it to connect.
I used this app on my gtablet and it worked just fine. running Bright Corners with the Clemnsys kernel.
justauser said:
I used this app on my gtablet and it worked just fine. running Bright Corners with the Clemnsys kernel.
Click to expand...
Click to collapse
Hi I have tried to get this pda net tablet to run on my gtab forever, it just wont connect to my unrooted dx runnining gingerbread. The best i can get is paired but no connection. I am running clemsyn kernel and cyanogen 7.1.0 rco.
Can anyone tell me how to get it running or suggest another program that will allow me to us my phones data plan that i am already paying for??
thanks in advance for any help !!
I don't suppose anyone knows if PDANet for iphone supports bluetooth? WIFI takes away WAYYYYY too much battery life.
When I saw the Black Friday deal for $37, I couldn't resist grabbing one to use as a bigger navigation screen. Ooops. I didn't realize it did not have GPS functionality. Thankfully, there are options to tether your phone's GPS to the Fire. I've tried several apps, and have gotten them to connect up, but I'm having issues with both Google Maps and Waze. Has anyone tried this and gotten it to work correctly? The issue I'm having, both apps will detect the correct GPS location and place my vehicle accordingly, but both apps also will not correlate that with navigation function. It's like they are half working. Can anyone confirm or deny getting it work correctly, and if so, which apps? I've tried a couple and have the same results with both. GPS Tether and TetherGPS.
I got it to work! There are some issues with dropped GPS signals, but I finally got the correct app and settings to have tethering working. I will be putting together a post explaining it, in case anyone wants to use their Fire as a navigation system.
xm41907 said:
I got it to work! There are some issues with dropped GPS signals, but I finally got the correct app and settings to have tethering working. I will be putting together a post explaining it, in case anyone wants to use their Fire as a navigation system.
Click to expand...
Click to collapse
Which apps did you use? Very interested in getting this to work.
xm41907 said:
I got it to work! There are some issues with dropped GPS signals, but I finally got the correct app and settings to have tethering working. I will be putting together a post explaining it, in case anyone wants to use their Fire as a navigation system.
Click to expand...
Click to collapse
Also interested
First, you need to make a wifi hotspot with your phone. I'm on Verizon and have that as part of my plan. If not, look into FoxFi. Once you've got the hotspot up and running well with the Fire, then you need a GPS tethering app. I tried a lot and kept having issues with Waze or Google Maps not working right. TetherGPShttps://play.google.com/store/apps/details?id=com.comptonsoft.tgps&hl=en is what worked for me. You need to install it on both devices. Also, you need to go into developer options and turn on mock locations. Once you're set up, just connect via the hotspot, open TetherGPS on your phone and start the server, then open it on the fire and start the client. I do have some issues with it dropping signal every so often, but a quick toggle of the client and it's working again. I hope that helps!
Also, grab yourself a magnetic dash mount. The Fire works great with the Scosche mounts from Walmart.