Related
Okay, so as far as I am able to find... This problem is pretty unique...
I'm running Cognition 4.5.3 with no software issues. I have had this problem since Cog 3...
Most people have trouble getting their phone to boot into download mode, but NOT ME!
My phone randomly (I can find absolutely no cause or trigger and I'm not really a novice at Android) will shut itself off. Now normally I would not have an issue with this, but when I go to turn the phone on... it boots straight to download mode, and no key combo or anything will avoid it. So I have been testing this out and I can reboot the phone from the enhanced power menu, I can boot into Recovery from enhanced power menu... But when the phone shuts off or when I shut it down, the ONLY way that I can get it to power on correctly, is to plug the phone in and wait for it to show that the phone is charging. Then I can power it on normally...
Now, this issue arose the same time that my phone began to refuse to be recognised when plugged into a computer via USB... and at times the USB debugging and USB connected notifications will remain in the notification bar until I reboot the phone...
Naturally, my first instinct was to try and restore to stock... But since no computer will recognize my phone (even with fresh drivers installed) I cannot use odin to flash to stock.
So to summarize my problems:
1. My phone will not be recognized by a computer. (USB device not recognized)
2. My phone randomly shuts itself off. (Not a big deal, I can live with that)
3. My phone ONLY boots into download mode unless plugged into the charger (Incredibly frustrating when I am not at home or I don't have my car charger)
4. USB debugging and USB connected notifications stick around until phone is rebooted. (Using enhanced power menu. Again, I can live with this minor annoyance)
have you tried reflashing that rom...or trying another?
it could be the random shutdown issue that some cappys have paired with a failing usb port.
try changing roms.
studacris said:
have you tried reflashing that rom...or trying another?
it could be the random shutdown issue that some cappys have paired with a failing usb port.
try changing roms.
Click to expand...
Click to collapse
Hehe... I tried a different rom for two weeks and had similar and/or more problems...
Reflashing doesn't help either.
I've tried my best to troubleshoot this on my own, so I'm not shutting down your attempt to help. Just letting you know I have tried it.
I hadn't heard about a failing USB port problem... I'll read up on it.
Thanks for your help!
Atleast you dont have to worry about soft bricks if it auto boots into download mode
d34thp1ng said:
Atleast you dont have to worry about soft bricks if it auto boots into download mode
Click to expand...
Click to collapse
Actually I do...because USB still won't interface...
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
like i said could be a short or something in the usb port...or somewhere in the hardware. if you experience this problem across different software then it has to be a physical defect someplace. cause if it were software related it would fix once you flashed something different...
you can try for a warranty replacement, that requires a little loose morals. you will have to do something to cause it not to boot, or only boot to the at&t screen otherwise they will have proof of root and/or custom rom and void your warranty. once thats accomplished mention some crap about kies failing and they should replace it.
studacris said:
like i said could be a short or something in the usb port...or somewhere in the hardware. if you experience this problem across different software then it has to be a physical defect someplace. cause if it were software related it would fix once you flashed something different...
you can try for a warranty replacement, that requires a little loose morals. you will have to do something to cause it not to boot, or only boot to the at&t screen otherwise they will have proof of root and/or custom rom and void your warranty. once thats accomplished mention some crap about kies failing and they should replace it.
Click to expand...
Click to collapse
Hmmm... a few months back my original USB/Charging cable broke and for a couple of days I was forced to use a generic MicroUSB cable to charge my phone... Could that have cause a short/damage to the port?
My phone does not have warranty as I bought it refurbished. :'(
(Plus my morals aren't that loose.)
Had a similar issue, eventually determined that it was a short in this usb port and did a warranty return. (Only when plugged in could I turn on, etc.)
If that isn't an option for you, you could try flashing CM. For some reason, the cyanogenmod build won't let the phone charge when off. ( Automatically powers back up once the juice flows.)
I flashed a nightly and somehow, magically, my phone would power back up normally ( but wouldn't turn off, unless plugged in without power. So strange!)
Even more weird? I flashed back to stock and the new powering and rebooting stuck. The short wasn't fixed, my phone simply seemed to reverse the problem.
Plus, you would be using cm.
Sent from my SGH-I897 using XDA App
tbrass said:
Had a similar issue, eventually determined that it was a short in this usb port and did a warranty return. (Only when plugged in could I turn on, etc.)
If that isn't an option for you, you could try flashing CM. For some reason, the cyanogenmod build won't let the phone charge when off. ( Automatically powers back up once the juice flows.)
I flashed a nightly and somehow, magically, my phone would power back up normally ( but wouldn't turn off, unless plugged in without power. So strange!)
Even more weird? I flashed back to stock and the new powering and rebooting stuck. The short wasn't fixed, my phone simply seemed to reverse the problem.
Plus, you would be using cm.
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
Thanks! You guys have pretty much answered my questions...
I don't want to leave my nice DG Rom though.
Since I have determined that it is a hardware problem... I think I'm just going to live with it for a few more weeks until I can afford to go ahead and buy the newer build of the Cappy... (Might even wait until the SGSII comes out.)
You should be able to get warranty replacement, just make sure the device is in a stock condition when you take it in!
tbrass said:
You should be able to get warranty replacement, just make sure the device is in a stock condition when you take it in!
Click to expand...
Click to collapse
Even though I purchased the device as a refurbished device?
The only problem is that I can't Odin back to stock...
Cease1 said:
Even though I purchased the device as a refurbished device?
The only problem is that I can't Odin back to stock...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=995143&highlight=safely+to+stock
this will get you to stock then look in forums for how to change boot animation change that to stock boot logo and your good to go i did read some were you could do boot img all on phone i belive. i cant find thats up to u
Okay so I called them and let them know what the phone was doing and they tried to send me to samsung to have them repair the phone...
I now hold in my hands a shiny new 1102 build Cappy... Took it to my local device service center and explained the random shutdowns and the booting into download mode and they replaced it no questions asked!
Now to get Cog 5b2 on here.
hi this is a bit strange for me. Me, my associate and a friend got a galaxy s i9000. My associate and me are always upgrading and downgrading with odin, trying last firmwares, kernel and more, no problem at all.
My friend got his stock kernel 2.2.1 on his phone. Two days ago he bring me the galaxy, totally dead. No combination, no download mode, no signs recharching, no signs attaching to the pc
He says "non ho fatto niente" (italian version of "i am scared of what you can think so i lie and gave the problem to you")
i searched the forums and tried some solutions (like vol+ and vol- while attached to the pc and insert the battery) but nothing happens. I have tried the battery of my phone, nothing. I have tried with the jig usb, nothing.
So, there is something else i can do? Some trick? I read in this forum that someone have solved with the jig, but how? I just put in, put in and tried to turn on the phone, nothing.
There is no sign of life at all. It's a paperweight?
Had the same thing, got in to download mode this way:
Hold menu+vol down+power and then (still holding the keys) insert Micro USB in to phone (Odin running). You need at least 13 fingers on one hand (finally visiting Chernobil payed off )
I tested it three times, only this worked (phone was totally dead, failed at flashing Sbl.bin).
Mine is still bricked (something wrong with my USB on comp or the cable) and at the moment I can not get into download mode this way (failed at param.lfs). Previously the phone was of battery for 24h+ and I'm waiting to see if this does something.
Good luck, you'll need it
nothing happens :S
tried odin 1.82...
there's a youtube video that shows a modified home made jig and it worked!give it a try
Are you still holding the keys after you connect USB cable? You should for some time.
How long has it been disconnected from power (removed battery)?
i put in the battery of my galaxy that was a 60%...it is better to use the original charged?
omarfaieq007 said:
there's a youtube video that shows a modified home made jig and it worked!give it a try
Click to expand...
Click to collapse
Link please!
(If you are not allowed to post links, just replace http with h**p or something)
I'll put on charging...it's getting hotter so something "it's alive"...we'll see
so...i made it working, don't know how precisely...it was full of crap, so i wiped out and upgraded to 2.3.4...but:
got arctifacts while changing screens (from desktop to app menù and turning on)
the phone shut down totally random...
I suspect some sort of hardware damage. You should put on original firmware and RMA it. If you don't put on original firmware they will claim it got damaged while flashing with an unofficial rom and you will have to pay for repairs and parts.
Could be faulty internal SD, can you run some sort of Android hardware testing software?
actually is "empty"...it doesn't have sim neither sd, is there charging...and now doesn't show the charging animation, shutdown again...bah
ok this is scary...the last 3 times the phone shutdown was because i put back the rear cover...wtf...
what about the testing tool? any name\know usefull software?
Seems we have similar problems. Sometimes when I had put my phone on desk (on the battery cover, not display) it shut down. Put a piece of paper under the battery but did nothing.
I meant internal phone memory, not removable sd card.
ahhh kk...and what about teh testing tool? you know some good app?
Today, i tried to flash my galaxy with 2.3.4 I9000XXJPY , something like that ... and i got stuck at partitioning .... So i removed battery. and now i cant turn on my< phone. I cant enter download mode, because 3 buttons are not working for me So what are my options ?? Jig? or anything else ???
try the other combination vol+ home power...i did this today and it works...otherwise try the jig, always worked for flashing brick
That doesn't work either May phone is strange. When i first tried to update it trough KIES, something blocked, sedond time was a success, after that i got MTP crashing aplication problem, that i couldn't solve i will get the Jig and try that. But if for some reason, JHig doesn't work... what are my next options ???
If phone is totally dead, jig won't work. If jig won't work, you need jtag. If jtag won't work you need to replace 'motherboard' on the phone.
If jig does not work, just RMA (odnesi na garanciju) the phone. If flashing kills it, something was probably wrong with the phone.
(hold vol+ home power and while holding them plug in USB- it worked for me, but failed again and it doesn't work anymore)
Ok, today i got jig, and i insert it into phone, and download mode pops up, but when i connect it to the computer, computer doesn't recognize phone, and odin too ??? what to do now ??
Have you tried reinstalling the Samsung drivers on to the pc?
Also make sure Kies isn't running, it's worth a try
I tried, no luck Any other solutions maybe ???
Oh dear...
I was experiencing the PHONE-->Triangle-->PC logo problem after a flash with odin went 'wrong' with my galaxy S phone.
I followed the guide here to solve it:
http://forum.xda-developers.com/showthread.php?t=981343
And as a result flashed my phone with the stock firmware from this file:
T959UVKA6_REV05_home_low_CL860813.tar
ODIN successfuly reported a green 'Success' Screen, so i disconnected the phone and tried to power it on. But the device is completely 100% unresponsive.
Nothing happens when i plug it into the PC, nor when i charge it from the mains.
I've searched and tried loads of suggestions from this and other forums, solutions including:
1. Removing battery, holding both VOL keys down, plugging into PC.
2. Holding normal HOME, VOL+, Power key. and HOME, VOL-, Power Key...
The problem is, i cannot get the galaxy s to respond to ANYTHING. So there is no way i can get into the download screen to re-flash.
Can anyone lend any advice to me about this issue? Is the phone totally dead now?
I read things about a JTAG? or somesuch cable, but these cables appear to only work as long you can get the "downloading" screen to work.
I don;t want to throw my phone away. Can anyone help?
Thanks
Could you tell us why the dirst flash went wrong ?
Sent from my GT-I9000 using Tapatalk
doctor_vai said:
Could you tell us why the dirst flash went wrong ?
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
The first flash went 'wrong' becuase ODIN kept getting stuck at the setupconnection stage.
I learnt that removal of the SDCard and SIMCard was the route to fix this, but having fixed it, i flashed it with the stock ROM as detailed in the first post.
Thanks
Hi.
Firstly. If the phone will not response if you put the charger on it the bootloader seems to be dead.
Maybe a possibility would be to use a "USB jig"
Thats not the JTAG!!
JTAG is a develover device for flashing and only the samsung support will have such jtags.
JIG (for USB) is a resistor soldered to the usb connector.
You can buy that usb jig in amazon, ebay or do it yourself.
May you can switch the phone into download mode with it. But no guarantee..
GalaxyKnight said:
Hi.
Firstly. If the phone will not response if you put the charger on it the bootloader seems to be dead.
Maybe a possibility would be to use a "USB jig"
Thats not the JTAG!!
JTAG is a develover device for flashing and only the samsung support will have such jtags.
JIG (for USB) is a resistor soldered to the usb connector.
You can buy that usb jig in amazon, ebay or do it yourself.
May you can switch the phone into download mode with it. But no guarantee..
Click to expand...
Click to collapse
Thank you GalaxyKnight...
i've just bought a USB jig on ebay for £1.25, hopefully it works.
I'd rather not have to throw the phone away.
mcai8rw2 said:
Oh dear...
I was experiencing the PHONE-->Triangle-->PC logo problem after a flash with odin went 'wrong' with my galaxy S phone.
I followed the guide here to solve it:
http://forum.xda-developers.com/showthread.php?t=981343
And as a result flashed my phone with the stock firmware from this file:
T959UVKA6_REV05_home_low_CL860813.tar
ODIN successfuly reported a green 'Success' Screen, so i disconnected the phone and tried to power it on. But the device is completely 100% unresponsive.
Nothing happens when i plug it into the PC, nor when i charge it from the mains.
I've searched and tried loads of suggestions from this and other forums, solutions including:
1. Removing battery, holding both VOL keys down, plugging into PC.
2. Holding normal HOME, VOL+, Power key. and HOME, VOL-, Power Key...
The problem is, i cannot get the galaxy s to respond to ANYTHING. So there is no way i can get into the download screen to re-flash.
Can anyone lend any advice to me about this issue? Is the phone totally dead now?
I read things about a JTAG? or somesuch cable, but these cables appear to only work as long you can get the "downloading" screen to work.
I don;t want to throw my phone away. Can anyone help?
Thanks
Click to expand...
Click to collapse
Hm why did you flash Vibrant firmware? If you don't have vibrant of course it doesn't work..and if it contained bootloaders your phone is probably hard bricked (assuming vibrant had different bootloaders from i9000). But if you only flashed ROM then you have good chances of recovering it with jig..let's hope it works
Sent from my CM'd SGS
Does a "hard brick" mean it is proper dead?
I could have sworn i got that last firmware file from a samsung galaxy s forum?!
When flashing with proper firmware ("Cyanogen") will the flash re-write/fix the bootloaders? Or to put it another way... what options do i need to select in Odin?
Thanks
Jig Doesn't Work
Hi... sorry to self bump like this.
I bought a JIG off ebay, plugged it into the phone and sadly the phone did nothing.
Does that mean that the phone is ultra-dead, and there is NO HOPE?
I don;t want to throw it away mommy!
Could the battery be flat?
***Edit - I used the jig on a friends Galaxy S and the phone went into download mode ok. But it does not on mine.
If windows doesn't even recognise the device in any capacity at all... doesn't that mean Game Over? Surely any solution now would still require windows to see the device?
mcai8rw2 said:
Hi... sorry to self bump like this.
I bought a JIG off ebay, plugged it into the phone and sadly the phone did nothing.
Does that mean that the phone is ultra-dead, and there is NO HOPE?
I don;t want to throw it away mommy!
Could the battery be flat?
Click to expand...
Click to collapse
was there any sign of life from the phone before?
Sent from my GT-I9000 using xda premium
If you have a i9000, that's not a vibrant, and I think that rom you flashed probably contains bootloaders (since it's meant for recovery). Did you select phone bootloader update in odin?
You could try borrowing a battery/charging the one you have, it might be flat, hence why you can't turn on the phone at all. (Maybe vibrant bootloaders have some similarities). Also try check if vibrant has alternate ways of getting to download mode
Lastly, try http://forum.xda-developers.com/showthread.php?t=1330491
Thank you
I have tried using the JIG on a battery that is full, and i still get zero response from my phone.
The link you gave me looks at first glance to be quite complex, but seeing as it is dealing with hardware, it looks like it might work.
Cheers
J
If you open the firmware file with 7Zip, you'll be able to check if it contains bootloaders. Look for bootloader.bin and sbl.bin, if I recall correctly.
Also, what was the battery at when you were flashing? I remember accidentally flashing a Vibrant ffirmware when I first got my i9000m (due to the box saying "Samsung Vibrant", duh) and I distinctly remember my phone losing the ability to charge the battery. If your battery died, there's a good chance that nothing is happening because of this, even when you plug your phone in.
Your best bet sounds like getting a USB jig, I'd say. But check to see if the file you flashed contained bootloaders. If it didn't, it's probably something similar we've overlooked. If it does contain bootloaders, you may have bricked your device.
Use UnBrickable Mod http://forum.xda-developers.com/showthread.php?t=1330491
This allows total resurrection regardless if you've damaged your bootloaders or not. You just need to mod your device once and then you can upload Download Mode from then on!
If you'd like, I can perform the mod. I ask for $30 + shipping (usually $6 unless you're overseas). Send me a PM if you need me to do it.
There is no better option than UnBrickable Mod. If you have JTAG performed, then you've got a working device one time. If you do UnBrickable Mod, you can ALWAYS upload Download Mode by removing the battery, plugging it into the computer and pressing the "Download Mode" button on the resurrector I created.
SBL.BIN file located.
Oh deary deary me... the firmware DOES contain an SBL.BIN file :-(
Sadly, i tried all softbrick button pushing solutions on a friends FULL battery. But this had no effect either. And i have already bought a USB jig, that does nothing on my bricked phone, but DOES work on another GalaxyS. This might be the battery though.
Having never soldered anything in my life, i am reticent to start on the hardware hacking side of things if there is another option. But the longer this goes on, the less and less likely it sounds like another option is available.
For Sparta?
upichie said:
If you open the firmware file with 7Zip, you'll be able to check if it contains bootloaders. Look for bootloader.bin and sbl.bin, if I recall correctly.
Also, what was the battery at when you were flashing? I remember accidentally flashing a Vibrant ffirmware when I first got my i9000m (due to the box saying "Samsung Vibrant", duh) and I distinctly remember my phone losing the ability to charge the battery. If your battery died, there's a good chance that nothing is happening because of this, even when you plug your phone in.
Your best bet sounds like getting a USB jig, I'd say. But check to see if the file you flashed contained bootloaders. If it didn't, it's probably something similar we've overlooked. If it does contain bootloaders, you may have bricked your device.
Click to expand...
Click to collapse
Sounds like AdamOutler is your solution for this one.
i have the same issue!!
i have the exact same problems and it happened right after i installed clockworkmod through odin and then i tried other suggestions until i used a eugene file and once i did that, it completely murdered my phone and its become completely unresponsive.. BUT i noticed that even though the screen wont come on or anything, THE BATTERY ACTUALLY STILL CHARGES! plzzzzzz help
I know this thread is a little old now... but i just wanted to say a big huge THANKS to MOBILETECHVIDEOS.
http://mobiletechvideos.mybigcommerce.com/samsung-i9000-jtag-brick-repair/
I sent my phone off to them and they fixed my dead Samsung completely.
For anyone having this same problem... make sure you check out their website. As they are masters at ressurecting a dead phone!
this problem solve or not ? cause im having the same problem too
AdamOutler said:
Use UnBrickable Mod http://forum.xda-developers.com/showthread.php?t=1330491
This allows total resurrection regardless if you've damaged your bootloaders or not. You just need to mod your device once and then you can upload Download Mode from then on!
If you'd like, I can perform the mod. I ask for $30 + shipping (usually $6 unless you're overseas). Send me a PM if you need me to do it.
There is no better option than UnBrickable Mod. If you have JTAG performed, then you've got a working device one time. If you do UnBrickable Mod, you can ALWAYS upload Download Mode by removing the battery, plugging it into the computer and pressing the "Download Mode" button on the resurrector I created.
Click to expand...
Click to collapse
Are you still working in the Unbrickable mod?
Here is what I've tried so far:
1- SuperOneClick. The program hangs at a step where it reads "Check if rooted : false"
2- Galaxy One Click Root. Program is responsive but it stops at "* daemon started successfully *" and does nothing from there.
3- Copying the "update.zip" file to the root of my internal SD card. I'm greeted by a "E: Signature verification failed. Installation aborted" error.
All remediable steps to fix one or all problems REQUIRES root, so i'm in limbo here. I honestly am about to cry. This seemed a hell of a lot easier when I read about it...
Well, what's left here for me to do? I'm lost. I read so many threads here I honestly can't do it anymore. This is my last resort.
This phone is all stock, AT&T Captivate.
Sorry if this is the wrong section of this forum... New here.
Flash your phone via Odin to jf6 stock then try superoneclick
Sent from my SPH-D710 using XDA App
hold up on that flash back. It oculd cause you to loop. Try using SOC v1.9 or lower. Also make sure your computer has all the required updates installed.
So this developed into a new, bigger, problem. I tried THIS guide to flash cyanogenmod (latest) but, guess what, the freaking thing hanged. So I was left with the only option, severing the link between PC and phone, and rebooting the phone.
I get this "phone - attention sign - computer" image. I think to myself "oh sh#&, I bricked the phone" so I rebooted it once again and to my surprise, the phone won't turn on. Won't react to the usb cable (can't boot to download mode), won't react to wall charger, won't turn on with the power button.
The battery was almost full...
What the heck is going on!?!? I had this phone for 3 days and I already ruined it?
I wan't to kill myself
leandroab said:
So this developed into a new, bigger, problem. I tried THIS guide to flash cyanogenmod (latest) but, guess what, the freaking thing hanged. So I was left with the only option, severing the link between PC and phone, and rebooting the phone.
I get this "phone - attention sign - computer" image. I think to myself "oh sh#&, I bricked the phone" so I rebooted it once again and to my surprise, the phone won't turn on. Won't react to the usb cable (can't boot to download mode), won't react to wall charger, won't turn on with the power button.
The battery was almost full...
What the heck is going on!?!? I had this phone for 3 days and I already ruined it?
I wan't to kill myself
Click to expand...
Click to collapse
Unfortunately, it doesn't sound promising. Even if you have a black screen, I would still try to access DL mode with Odin open (pull battery, remove sim, put battery back in, hold both volume buttons and insert the USB cord, don't touch the power button). If you get a yellow com light in Odin, even if the screen stays black, you're in download mode. If that doesn't work, you could try a jig and then see if Odin recognizes it. If neither of those work, you'll need to send your phone out to someone like Adam Outler to have it unbricked.
I get nothing with Odin. I can't believe I bricked my phone like that. I thought I would get an error screen at least. But this is outrageous. It's like the phone shorted and fried from the inside.
All I can say is wow... My happiness of a new phone turned to ashes in 30 seconds. Nice waste of money.
If you buy a USB download jig it will get you out of soft brick situations and if Odin fails try heimindal
Sent from my SPH-D710 using XDA App
leandroab said:
I get nothing with Odin. I can't believe I bricked my phone like that. I thought I would get an error screen at least. But this is outrageous. It's like the phone shorted and fried from the inside.
All I can say is wow... My happiness of a new phone turned to ashes in 30 seconds. Nice waste of money.
Click to expand...
Click to collapse
It didn't fry, it failed while flashing bootloaders. The bootloaders are what tell your phone what to do when you press power. Mismatched bootloaders = hard brick = no power up.
I would still try a jig, but if that doesn't work send a message to AdamOutler. He can give you the details of getting it unbricked.
MJHawaii said:
If you buy a USB download jig it will get you out of soft brick situations and if Odin fails try heimindal
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
Considering the flashing hanged at the very beggining, I'm 90% sure it HARD-bricked my device. A jig wouldn't work and I'm left with a very fancy paperweight.
There is NO power on whatsoever.
My luck is amazing, isn't it?
Please, someone tell me there is still hope (there isn't probably)
apbthe3 said:
It didn't fry, it failed while flashing bootloaders. The bootloaders are what tell your phone what to do when you press power. Mismatched bootloaders = hard brick = no power up.
I would still try a jig, but if that doesn't work send a message to AdamOutler. He can give you the details of getting it unbricked.
Click to expand...
Click to collapse
Exactly. I figured
I have no idea of who "AdamOutler" is. But I'll find out. :/
FML
leandroab said:
Considering the flashing hanged at the very beggining, I'm 90% sure it HARD-bricked my device. A jig wouldn't work and I'm left with a very fancy paperweight.
There is NO power on whatsoever.
My luck is amazing, isn't it?
Please, someone tell me there is still hope (there isn't probably)
FML
Click to expand...
Click to collapse
I suspect you are correct about the hard brick, but I would still try a jig. I had a failure flashing bootloaders once that killed my cappy, but though a stroke of fortune a jig still worked for me. You can build one for a couple of bucks of parts from Radio Shack, you've got nothing to lose. If not, it can be repaired.
Before you start looking at all that, make sure you are hard bricked. Easiest way is to use Linux Mode Detector. Use the link below labeled Captivate sig link, then choose am i bricked?.
apbthe3 said:
I suspect you are correct about the hard brick, but I would still try a jig. I had a failure flashing bootloaders once that killed my cappy, but though a stroke of fortune a jig still worked for me. You can build one for a couple of bucks of parts from Radio Shack, you've got nothing to lose. If not, it can be repaired.
Click to expand...
Click to collapse
Yes, it's still worth a try. But unfortunately it will have to wait at least till the end of the month. That's when my college break is over and I'm back to school.
mrhaley30705 said:
Before you start looking at all that, make sure you are hard bricked. Easiest way is to use Linux Mode Detector. Use the link below labeled Captivate sig link, then choose am i bricked?.
Click to expand...
Click to collapse
Sorry but I'm not installing an OS just to use a program. I do believe the phone is hard-bricked though:
1- Doesn't power up with the on/off button
2- Doesn't go into recovery mode
3- Doesn't go into download mode
4- Doesn't light up when plugged into wall charger
If that isn't hard-bricked, then I'm really scared to find out what that really is
I sent a PM and an email to Adam Outler. I hope he replies it!
Linux is easier to use than you think, and it's a really handy tool to have when working with Android phones. You can install Linux entirely to a cheap thumb drive (I have a $4 4gb thumb drive running lubuntu) and it can get you out of a lot of Android related jams. If you're not willing to go through letting Linux up and running, might not want to do too much with phones either. I don't mean to be snarky, but I started using Linux casually a couple years before I started messing with phones and Linux is much more straightforward.
Edit: and if you have a multimeter around, check the voltage of your battery. Should be 4.2v=full, 3.5v ish is dead. If you battery pull, reinsert, hold volume up and down, and then connect to your pc with Odin open (don't hit power) what does Odin show? Last, did you get this phone used? Battery may be completely worn out, which would be why it was almost full and looks hard bricked now.
Wubi installer would be a better choice. And when your finished, it uninstalls just like an app. It's kind if a semipermanent dual boot. Check it out.
sekine12 said:
Linux is easier to use than you think, and it's a really handy tool to have when working with Android phones. You can install Linux entirely to a cheap thumb drive (I have a $4 4gb thumb drive running lubuntu) and it can get you out of a lot of Android related jams. If you're not willing to go through letting Linux up and running, might not want to do too much with phones either. I don't mean to be snarky, but I started using Linux casually a couple years before I started messing with phones and Linux is much more straightforward.
Click to expand...
Click to collapse
Well, I guess I'll look into that now. I'm running windows over a MacBook (stuck with it till I get back home). Maybe some tips running linux w/ a pendrive with bootcamp?
sekine12 said:
Edit: and if you have a multimeter around, check the voltage of your battery. Should be 4.2v=full, 3.5v ish is dead. If you battery pull, reinsert, hold volume up and down, and then connect to your pc with Odin open (don't hit power) what does Odin show? Last, did you get this phone used? Battery may be completely worn out, which would be why it was almost full and looks hard bricked now.
Click to expand...
Click to collapse
I'll look into the multimeter. The phone IS used, but I'm sure the battery isn't worn out.
Hooking up the phone, pressing both volume buttons, with odin open gives me nothing. Zip. If it was the battery wouldn't the phone give some sign of life after charging it for a while? Didn't happen.
mrhaley30705 said:
Wubi installer would be a better choice. And when your finished, it uninstalls just like an app. It's kind if a semipermanent dual boot. Check it out.
Click to expand...
Click to collapse
As stated, using windows with bootcamp over a MacBook. Maybe you can help me out? Will this work?
leandroab said:
If it was the battery wouldn't the phone give some sign of life after charging it for a while? Didn't happen.
Click to expand...
Click to collapse
My understanding is that charging is controlled by firmware to protect the battery, so it won't even charge if it's bricked.
apbthe3 said:
My understanding is that charging is controlled by firmware to protect the battery, so it won't even charge if it's bricked.
Click to expand...
Click to collapse
Right, or if the battery is so dead it can't start to turn on, it won't turn on. Or, if it was soft-bricked with no images to display, it may have killed itself without a firmware to allow it to charge properly. Not very likely, but there are a couple possibilities that end with a dead battery and no way to know.
apbthe3 said:
My understanding is that charging is controlled by firmware to protect the battery, so it won't even charge if it's bricked.
Click to expand...
Click to collapse
sekine12 said:
Right, or if the battery is so dead it can't start to turn on, it won't turn on. Or, if it was soft-bricked with no images to display, it may have killed itself without a firmware to allow it to charge properly. Not very likely, but there are a couple possibilities that end with a dead battery and no way to know.
Click to expand...
Click to collapse
Right. I'll check the V of the baterry once I get my hands on a multimeter.(somebody took all of them here at the house for some reason)
The multimeter read that the battery has 3.92V, so it's not dead. So to sum it up I only have two options now:
1- Try a USB jig
2- Attempt the UnBrickable mod/send it to Adam Outler
Both of them will take time. Unfortunate for me. Good news is that WILL have it back up and running. It will just take some time
leandroab said:
The multimeter read that the battery has 3.92V, so it's not dead. So to sum it up I only have two options now:
1- Try a USB jig
2- Attempt the UnBrickable mod/send it to Adam Outler
Both of them will take time. Unfortunate for me. Good news is that WILL have it back up and running. It will just take some time
Click to expand...
Click to collapse
So nothing whatsoever shows up in ODIN when you 1- batt pull, 2- batt reinsert, 3- plug in USB while holding either volume down, or volume up + vol down (w/o turning phone on)?
Hi again guys, So heres the thing. My boss brought me this LG Thrill 3D(p925) i think it is. Problem is that the phone has no IMEI and or baseband showing. It will turn on but will not enter recovery no matter what i have done. So my guess is that it was flashed with Froyo having the gingerbread baseband(not sure about that). Anyways, I decided to try to flash it with gingerbread and have follow all the tutorials i have found in here and google. But no luck at all. When its flashing or updating the phone it will stop communicating when it reboots to download which is a completely black screen lol. And the updater reads that there was a problem communicating with the phone. Question is, is there a workaround so that at least i have a recovery to flash it? And or a way to force the update proccess? Perhaps the phones is bricked even though it turns on and wifi works and all that. Also btw, the phone turns on only if connected to a charger, but it wont connected to the usb cable from the computer and or simply pressing power on it. In order to turn it on, i need to insert the charging cable and press power. Any ideas?
To flash a kdz phone needs to be in download mode
Try this http://forum.xda-developers.com/showthread.php?t=1491870 and start at 3.flash tool and follow directions to the t
Sent from my LG-P925 using xda app-developers app
wayno140 said:
To flash a kdz phone needs to be in download mode
Sent from my LG-P925 using xda app-developers app
Click to expand...
Click to collapse
True that, but the phone seems like download mode is not working correctly. When i put it in download mode(pressing volume up and inserting the usb cable) The phone seems to be there, at least it vibrates and show as serial on device manager. But then when firmware flash starts it will stop on 15 percent and then send a message about problem with communication. I dunno what to do since i cant get to recovery neither. My guess it maybe because of the corrupted IMEI and no bb showing but im not shure of that. It maybe be bricked someway somehow. Funny thing is that it will turn on normally if i insert the usb charger and press the power button, but it wont turn on without the charger. After that it just works normally, except for the no imei stuff. It even connects to wifi also.
Someone posted a fix to recover imei number look in the o3d forum it is the same phone as thrill
Sent from my LG-P925 using xda app-developers app
enelyam said:
True that, but the phone seems like download mode is not working correctly. When i put it in download mode(pressing volume up and inserting the usb cable) The phone seems to be there, at least it vibrates and show as serial on device manager. But then when firmware flash starts it will stop on 15 percent and then send a message about problem with communication. I dunno what to do since i cant get to recovery neither. My guess it maybe because of the corrupted IMEI and no bb showing but im not shure of that. It maybe be bricked someway somehow. Funny thing is that it will turn on normally if i insert the usb charger and press the power button, but it wont turn on without the charger. After that it just works normally, except for the no imei stuff. It even connects to wifi also.
Click to expand...
Click to collapse
hold vol up / power and insert batt to enter dl mod.
My phone is doing the EXACT same thing.
enelyam said:
Hi again guys, So heres the thing. My boss brought me this LG Thrill 3D(p925) i think it is. Problem is that the phone has no IMEI and or baseband showing. It will turn on but will not enter recovery no matter what i have done. So my guess is that it was flashed with Froyo having the gingerbread baseband(not sure about that). Anyways, I decided to try to flash it with gingerbread and have follow all the tutorials i have found in here and google. But no luck at all. When its flashing or updating the phone it will stop communicating when it reboots to download which is a completely black screen lol. And the updater reads that there was a problem communicating with the phone. Question is, is there a workaround so that at least i have a recovery to flash it? And or a way to force the update proccess? Perhaps the phones is bricked even though it turns on and wifi works and all that. Also btw, the phone turns on only if connected to a charger, but it wont connected to the usb cable from the computer and or simply pressing power on it. In order to turn it on, i need to insert the charging cable and press power. Any ideas?
Click to expand...
Click to collapse
My phone is doing the same exact thing. What was the best and easiest way the fix this issue PLEASE!!!!!!!!!!!!
Great news I found out how to fix this issue
I ran the LG SW upgrade apps on a pc with Windows XP Professional, turned off the firewall, and the download went PERFECT.!!!!!!!!!!!!!!