i have LG thrill 4g but for the past 2 weeks the touch is not working properly, the phone freezes and wakes up after 3-4 minutes. the top notification bar doesn't work in portrait mode but works in landscape mode.
So my query is :
1. do i need to replace the digitizer ? if yes, can i use the new digitizer of LG optimus 3d. O3D digitizer is compatible with Lg thrill or not ?
thanks
kaushik
kkfromjk said:
i have LG thrill 4g but for the past 2 weeks the touch is not working properly, the phone freezes and wakes up after 3-4 minutes. the top notification bar doesn't work in portrait mode but works in landscape mode.
So my query is :
1. do i need to replace the digitizer ? if yes, can i use the new digitizer of LG optimus 3d. O3D digitizer is compatible with Lg thrill or not ?
thanks
kaushik
Click to expand...
Click to collapse
As it's been said time and time again,
There is no difference between the two.
thank you very much for the reply, so i can go ahead with the Digitizer but just on other thought , any idea about why i am getting this problem with my phone ? is it possible if i use other ROM , this issue will get resolved w/o changing the digitizer ?
kkfromjk said:
thank you very much for the reply, so i can go ahead with the Digitizer but just on other thought , any idea about why i am getting this problem with my phone ? is it possible if i use other ROM , this issue will get resolved w/o changing the digitizer ?
Click to expand...
Click to collapse
What rom are you running right now? I would definitely try wipes and a reinstall before I replaced hardware.
Sent from my LG-P925 using xda premium
Bdadd34 said:
What rom are you running right now? I would definitely try wipes and a reinstall before I replaced hardware.
Sent from my LG-P925 using xda premium
Click to expand...
Click to collapse
i purchased LG thrill from US last year, using it here in India and just 2 months back i upgraded it to GB when LG released the upgrade. i have already hard reset it 2-3 times .
Are u rooted with clockworkmod ?
Sent from my LG-P925 using xda premium
i have not rooted my phone , just 2-3 months back i upgraded to GB
kkfromjk said:
i have not rooted my phone , just 2-3 months back i upgraded to GB
Click to expand...
Click to collapse
I'm not very familiar with stk hard reset..but I don't think it wipes system partition as it would have to reflash rom. If you have corrupt system files hard reset may not fix....may need to reflash or could be hardware I suppose..I would reflash with lg flash tool if you haven't tried that already... Well truthfully I would have rooted and installed cwm long ago because I hate flashing from a computer through USB. I like my clockworkmod.
if u want to go that route find dark lestats thread in development it will walk u through the process.
Sent from my LG-P925 using xda premium
thanks , i am totally new to rooting and flashing but would like to do this before replacing any hardware. So once i do it , i will surely come back to you for help . i really appreciate
Related
Hey guys, i dont know if i posted in the right place but here it goes......
Ok so i jus got the lg optimus black p970 and first thing was first to upgrade as told by t-mobile i could upgrade to 2.3.....
Ok so i use the lg updating software on pc and it says i was being updated from 1.6 -2.1 although in (about phone) it says 2.2.2 bfore and after the s/w upgrade :s
So to cut it short i want to upgrade to 2.3 and i hear i need custom rom and root (only ever used super one click for galaxy tab) meaning lack of exp rooting lg....
will the gingerbreak root work for the lg thats not on 2.3 and is there a solid walkthrough about that you guys can link me too so i can fully understand what i am doing......what i have found doesnt explain much and i dare not risk it....
Thanks in advance
update......i rooted my phone with gingerbreak 1.2 worked a treat now its jus upgrading to 2.3 any help guys????
come on guys jus a little advice would be great
there are no custom ROMS for the black..... yet
Sent from my LG-P970 using XDA Premium App
jake_in_notts said:
there are no custom ROMS for the black..... yet
Sent from my LG-P970 using XDA Premium App
Click to expand...
Click to collapse
thanks man
If you want to root your LG P970 than u should use gingerbreak. There is a really nice topic made by Noejn explaining how to do it in the android development section of Black forum. There are no custom rom's yet but I think that they will appear in a short period.
takumi24 said:
update......i rooted my phone with gingerbreak 1.2 worked a treat now its jus upgrading to 2.3 any help guys????
Click to expand...
Click to collapse
Gingerbread update still hasn't been released by LG for the Optimus Black. What the T-mobile rep might have meant is that the LG Optimus Black is upgradeable to 2.3, which it is. It's just that the Android 2.3 update still isn't available yet for the OB.
Once custom ROMs are made based on AOSP 2.3 or CyanogenMod, then you can have Gingerbread for your OB.
LG might be releasing the official Gingerbread update on September based on this thread: http://android.modaco.com/content/lg-optimus-black-black-modaco-com/342281/2-3-gigerbread-official-release/
Just got my Thrill about a week ago got bored with it now its time for root but superoneclick does not work tried several methods and versions. completely stock phone even tried factory reset and erase all user data. Any help would be greatly appreciated.
Software version: LGP925-v10e-AUG-10-2011
Build:FRG83G
Is USB Debugging mode on?
Sent from my LG Thrill 4G
kevhuff said:
Just got my Thrill about a week ago got bored with it now its time for root but superoneclick does not work tried several methods and versions. completely stock phone even tried factory reset and erase all user data. Any help would be greatly appreciated.
Software version: LGP925-v10e-AUG-10-2011
Build:FRG83G
Click to expand...
Click to collapse
Tsk Tsk Tsk.... read forums on how to do it please!
But I'll help anyways, USB Debugging mode needs to be turned on, on your phone.
You need to have the LG Thrill USB drivers installed on your PC
You need to enter USB debugging mode on your phone... Should work after that.
Usb is on and yes i have current drivers installed....im not new to this stuff just new to the thrill coming from a captivate
any help is greatly appreciated
Are you using the one from the Development forum for the Thrill?
Yes ive tried that one, ive tried several
Are you on stock?
Sent from my LG Thrill 4G
yes i even did a hard reset as well as soft. I just reconfirmed my drivers are all up to date and installed.BTW im on windows 7 if thats of any help thanks for your help so far. Im usually really good with this stuff but im stumped
Let's see.
Are you looking to go to a particular ROM?
Sent from my LG Thrill 4G
not particularly any suggestions?
I don't have any suggestions.
As for root, I'll look into it.
Sent from my LG Thrill 4G
Thanks a lot for your help. I thought I had it last night it went through the entire process. But when my phone rebooted it bootlooped
Okay. Let's go through the loops.
Are you on Froyo or GB?
froyo 2.2.2 havent got any ota yet one of my reasons for wanting root
Alright.
FROYO - CHECK.
Would you care to try this in rooting?
it worked.
Thanks so much for your help i really do appreciate your time. Any rough estimates on your rom yet?
Really noob question... is there any plans on getting 21b rootable anytime soon?? I've had no problems running this stock, in fact battery life has been very much improved.
Sent from my LG-P920 using XDA App
kevhuff said:
it worked.
Thanks so much for your help i really do appreciate your time. Any rough estimates on your rom yet?
Click to expand...
Click to collapse
You're welcome.
Whenever an OTA for official gingerbread comes out, I'll start.
Sent from my LG Thrill 4G
cmeducknow702 said:
Really noob question... is there any plans on getting 21b rootable anytime soon?? I've had no problems running this stock, in fact battery life has been very much improved.
Sent from my LG-P920 using XDA App
Click to expand...
Click to collapse
I've never flashed 21b, so I wouldn't know yet.
Sent from my LG Thrill 4G
So who actually has handbricked his device with one of the leaked kernels. Please be honest!
and if there are who bricked their phones with ics leak kernels, please also leave feedback after what moves you bricked phone
I bricked my phone with that angel from ics kernel leak a few months ago.
I'm sure the emmc partition is corrupt that writes data to it while flashing rooms
Mobile Odin dont work or PC Odin can't help me i get factoryfs.img error on write.
Resulting in gingerbread roms stock or custom cant be flashed
ics repack touchwizz roms can't be flashed either.
Only working roms that work are aosp-aokp.imilka cm9.
Liquidsmooth -stunner and so on.
But Cassie's extra light x gingerbread rom works.
But that's the only 1
But I went to a phone shop today
And the person said thay be having new software in 2 weeks that will fix my issue
So I can have stock gingerbread again
I believe I've just bricked my GNote a few minutes ago. I was on Criskelo ICS, then this thing with ICS leaks are being dangerous and the performance of the phone in games made me try CM9.
I've followed the instructions, the phone doesn't restart now. I'm in USA, I just wonder how the warranty works for international GNote in here. Do I have to send it to Samsung UK ? I got my phone through Expansys-USA btw
emre1903 said:
I believe I've just bricked my GNote a few minutes ago....
I've followed the instructions, the phone doesn't restart now.
Click to expand...
Click to collapse
Are you certain it's bricked? Can you get into download mode?
emre1903 said:
I believe I've just bricked my GNote a few minutes ago. I was on Criskelo ICS, then this thing with ICS leaks are being dangerous and the performance of the phone in games made me try CM9.
I've followed the instructions, the phone doesn't restart now. I'm in USA, I just wonder how the warranty works for international GNote in here. Do I have to send it to Samsung UK ? I got my phone through Expansys-USA btw
Click to expand...
Click to collapse
I believe you have to be on GB to flash CM9.
I am running criskelo ics.
It has been a week now.
So far so good.
Sent from my GT-N7000 using XDA
FirstNoobToBrickHisPhone said:
I believe you have to be on GB to flash CM9.
Click to expand...
Click to collapse
Yes. And he has read the instructions!
@crualfoxhound - How it's bricked if you can turn it on and even run ICS?
Sent from my GT-N7000 using Tapatalk
I've the jig tried, didn't work, have couple separate batteries, they don't work either, and none of the buttons do work. The phone is plugged now, nothing on the screen, will see if anything happens
---------- Post added at 02:38 AM ---------- Previous post was at 02:36 AM ----------
zviki said:
Yes. And he has read the instructions!
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
shouldn't have that eager to try it, now I've seen in the FAQ, I had to be on GB, my bad
I'm sorry for you,but you should read carefully...
Sent from my GT-N7000 using Tapatalk
I've contacted Samsung Europe, do you think they'll just replace it, or I'll be billed for that
I think(I'm almost sure) it will not be free ...
Sent from my GT-N7000 using Tapatalk
zviki said:
Yes. And he has read the instructions!
@crualfoxhound - How it's bricked if you can turn it on and even run ICS?
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
I bricked my phone a few months ago. Flashing angel ics kernel.
I still had working download mode. But cwm recovery was missing and replace with a blue writing state,
Interface I think it was.
So I flashed a kernel I think kj4
Cwm recovery was installed again
Resulting in me using it again
As a semi bricked device
I totally bricked mine when updating stunner, I made a good bit of noise about it though I think most of it was removed. And yes totally bricked and going back to sammo for motherboard replacement at a cost to myself. Should be hard for any one to brick now with all the information available tho
Sent from my GT-N7000 using XDA
@denny said:
I totally bricked mine when updating stunner, I made a good bit of noise about it though I think most of it was removed. And yes totally bricked and going back to sammo for motherboard replacement at a cost to myself. Should be hard for any one to brick now with all the information available tho
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
any info about the cost ?
I dont know MY PHONE IS BRICK OR NO :s But i do mistake im wipe cache and factory reset when i was in ics Leak :S and i read the post he say " when you wipe cache or factory reset you phone will brick " but actually my phone doesnt brick :S but i got some lag freeze :S when i was on ICS leak always when i use code " *27676*3855# to factory reset my phone never work :S then reinstall full stock rom CSC PDA PIT PHONe aFTER THAT THE PHONE WORK :s
emre1903 said:
I've the jig tried, didn't work, have couple separate batteries, they don't work either, and none of the buttons do work. The phone is plugged now, nothing on the screen, will see if anything happens
---------- Post added at 02:38 AM ---------- Previous post was at 02:36 AM ----------
shouldn't have that eager to try it, now I've seen in the FAQ, I had to be on GB, my bad
Click to expand...
Click to collapse
you should follow some of the guides on this forum to see if you can get your phone recognized by PC odin. Just because the screen and buttons do not work does not necessarily mean that you are hardbricked
guitarplayerone said:
you should follow some of the guides on this forum to see if you can get your phone recognized by PC odin. Just because the screen and buttons do not work does not necessarily mean that you are hardbricked
Click to expand...
Click to collapse
I didn't know that, could you help me out ? I don't know how to do.
I you do not know what you are doing, Why do it?
we are all humans, we all do mistakes. Even if you "old school"
By mistake I flashed ICS kernel (witch was inside in iMilkas gapps) when I was on latest Cyanogen...
and I failed.
And I call to USA Samsung, they said : "Im sorry your phone is N-7000 ! Non-US phone." Call to the Europe.
I called to UK Samsung, they said: "Im sorry you in US, we can't help you".
So long story short, THANKs GOD for Ebay ! lol
I fixed for 29$ (JTAG box)
HI,
I have a su660 that has been flash to su660 that is compatible with it. but for some reason the screen is now not touchable. So the previous owner return it back to to original v20 rom. but still its not touchable. can anyone help me with these.
God Bless!
Thanks,
Thomie
ALso I have tried flashing v30c but still no luck.
tjsas1 said:
ALso I have tried flashing v30c but still no luck.
Click to expand...
Click to collapse
maybe ur touch screen has been broken...
try flash by LG upgrade with rom v20m or v30b 5 release 10/9
I think you should post your question in the Q&A thread. I think that's the rules
Sent from my LG-SU660 using xda app-developers app
Touch screen has been broken.
Hi guys
I have a problem with my galaxy note3 n900t. My menu and back key is not working when i touch them with my fingers but they work whit the s pen! Anyone with the same problem or a solution?
Thx
Someone else mentioned something similar, however insufficient information makes it hard to help much. I had an issue with original note and it was the rom. Tried other roms? Are you rooted? Stock? Custom rom?
Sent from my SM-N9005 using xda premium
nimixes said:
Someone else mentioned something similar, however insufficient information makes it hard to help much. I had an issue with original note and it was the rom. Tried other roms? Are you rooted? Stock? Custom rom?
Sent from my SM-N9005 using xda premium
Click to expand...
Click to collapse
The problem started on the stock rom. The key would not light up and they would not respond on my fingers just my s pen... this was the first phone that i liked on a stock rom haha... but i rooted it in hoppe that it would solve the problem.... i installed the wicked v5 rom... but still nothing... i called the service and they never heared about a problem like that... haha... but they sad that i had to repair the hole thing (digitizer,display...) not just the buttons... so not a cheap thing to do... so thats about everything....
mlikotaxda1989 said:
The problem started on the stock rom. The key would not light up and they would not respond on my fingers just my s pen... this was the first phone that i liked on a stock rom haha... but i rooted it in hoppe that it would solve the problem.... i installed the wicked v5 rom... but still nothing... i called the service and they never heared about a problem like that... haha... but they sad that i had to repair the hole thing (digitizer,display...) not just the buttons... so not a cheap thing to do... so thats about everything....
Click to expand...
Click to collapse
This just happened with my note 3. Not sure if it was after I rooted or it just happened randomly.
mlikotaxda1989 said:
The problem started on the stock rom. The key would not light up and they would not respond on my fingers just my s pen... this was the first phone that i liked on a stock rom haha... but i rooted it in hoppe that it would solve the problem.... i installed the wicked v5 rom... but still nothing... i called the service and they never heared about a problem like that... haha... but they sad that i had to repair the hole thing (digitizer,display...) not just the buttons... so not a cheap thing to do... so thats about everything....
Click to expand...
Click to collapse
Try another clean install of stock. I would suggest putting it to stock and if the issue persists going through samsunh warranty. If the issue was ocurring on stock it is most likely defective. Goodluck
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
nimixes said:
Try another clean install of stock. I would suggest putting it to stock and if the issue persists going through samsunh warranty. If the issue was ocurring on stock it is most likely defective. Goodluck
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Mine is a t-mobile..I think it was fine until I rooted it..but I am not sure as I only just got the phone, so maybe it stopped working before I rooted. I have tried reflashing the stock firmware...no improvement. The only thing I havne't tired is updating it to 4.4.2
Does anyone has an idea about this problem? This just started today and it's bugging me to no end!
Cheers!
menu key & back key not working when i flesh stock lollipop 5.0
at&t galaxy note 3 sm-n900a back key and menu key are not working after update lollipop 5 0 same problem here but when i install other custom rom then both key are work but when i install lollipop 5.0 then its not work if any one this problem try to flesh other rom hop its work :good:
Hi same here the buttons only works with the spen, help please stock firmware 5.0
Did anybody find a solution to this? I just tried rooting my note 3 and it all went fine but now my menu and back button do not work at all with my fingers but works fine with spen. Really hope somebody knows what to do!
Would you press *#2663# and tell me what you show under TSP FW? see if the phones touch key FW version is same as Parts touch key FW, try to update all of them if its work great if not let me know so we can upgrade your keys.
So my problem is that only my menu key doesn't work. Just changed the screen/frame. Works with always with the pen and some time when I tap it. Back key works fine. On rooted 5.0. Touch key fw does match at fx10