SOLVED: when having trouble with your computer not making a good connection to the phone, try your USB HUB on the mother board. it totally fixed my problem!
So here it is. I received a cappy from a buddy at work.
Basically, she is running cognition (FROYO BASED) rom, not sure of the kernal, and Cwm.
i can get the phone to reboot into RED CWM recovery, and even into DOWNload mode.
The phone was shut off during a factory reset. the battery died.
(IDK the girl was a dumbass and did it from settings on the phone not in CWM )
The phone will boot, ONLY after a factory reset from CWM but the setup google accs f/c's and the only thing i can get it to do is volume up/down pull the notification bar down and power off recovey dl mode...ect ect.
Task manager say's there are no APPS installed on the phone running? yet when i go LVL 2 RAM clear, the phone says 13 apps closed..
I think the Stock APK's have been deleted, since i cannot get into menu at all.
Since she factory reset the phone, and wiped the SD CARD, ALL CWM recoveries she created are GONE.
I have Cleared the cache, and wiped dalvik code, fixed permissions.....
I'm very familiar with the VIBRANTS, not the cappy's so this is a challenge to me.
my Vibrant has connected with all the usb drivers from samsung, but the cappy cannot. I've even downloaded the drivers for just the CAPPY, uninstalled all others, and Still not recognized, yet my vibrant does?
i've installed i think every driver on here for captivates, kies downloads, even went to the samsung website and Downloaded from there.
STILL NOT CONNECTING.
Even DL'd the AIO cappy toolbox (very nice to have for my VIBRANT)
Still no avail.
THE PHONE CANNOT MOUNT THE EX SD CARD. So that idea's out.
all my drivers are correct for the 32 bit vista OS. even tried on my GF's 64 Windows 7.
Still no avail.
I've installed the drivers with the phone in DOWNLOAD mode even, still not connecting.
Rebooted the computer after removing and also reinstalling drivers.
Changed between 3 diff cords, all work for my VIBRANT,
still no avail.
Any idea's would be greatly appreciated.
Thanks.
PelvicThunder said:
So here it is. I received a cappy from a buddy at work.
Basically, she is running cognition rom, not sure of the kernal, and Cwm.
i can get the phone to reboot into RED CWM recovery, and even into DOWNload mode.
The phone was shut off during a factory reset. the battery died.
(IDK the girl was a dumbass and did it from settings on the phone not in CWM )
The phone will boot, ONLY after a factory reset from CWM but the setup google accs f/c's and the only thing i can get it to do is volume up/down pull the notification bar down and power off recovey dl mode...ect ect.
Task manager say's there are no APPS installed on the phone running? yet when i go LVL 2 RAM clear, the phone says 13 apps closed..
I think the Stock APK's have been deleted, since i cannot get into menu at all.
Since she factory reset the phone, and wiped the SD CARD, ALL CWM recoveries she created are GONE.
I have Cleared the cache, and wiped dalvik code, fixed permissions.....
I'm very familiar with the VIBRANTS, not the cappy's so this is a challenge to me.
my Vibrant has connected with all the usb drivers from samsung, but the cappy cannot. I've even downloaded the drivers for just the CAPPY, uninstalled all others, and Still not recognized, yet my vibrant does?
i've installed i think every driver on here for captivates, kies downloads, even went to the samsung website and Downloaded from there.
STILL NOT CONNECTING.
Even DL'd the AIO cappy toolbox (very nice to have for my VIBRANT)
Still no avail.
all my drivers are correct for the 32 bit vista OS. even tried on my GF's 64 Windows 7.
Still no avail.
I've installed the drivers with the phone in DOWNLOAD mode even, still not connecting.
Rebooted the computer after removing and also reinstalling drivers.
Changed between 3 diff cords, all work for my VIBRANT,
still no avail.
Any idea's would be greatly appreciated.
Thanks.
Click to expand...
Click to collapse
First, see if you can find out which version of Cognition she was running (Gingerbread- or Froyo-based).
Once you have that information, I believe you should be able to download the appropriate ROM on you computer and copy it to the microSD card (adapter or whatever method you need to do to get it there). Since you can get into CWM recovery, you could try flashing the ROM from there. Assuming it's a full wipe rom (and you're not concerned about keeping apps installed on the phone), it should reset things to a more workable state. (If you are worried about apps remaining... I don't know what to say at this point, since you can't get to Tibu.)
If that doesn't work, you could try the one-click back to stock (realizing that you're having connectivity issues, I'll get to that in a second).
When you connect the phone in download mode to ODIN, does the yellow COM:# show up?
If you have tried ODIN on your Vista computer, try running ODIN as Administrator.
I've had some luck in the past getting the phone to be recognized (assuming Froyo) by doing this:
1. With nothing connected to computer, start ODIN (one-click to stock would be good).
2. Pull battery on phone.
3. Reinsert battery, but do not power on.
4. Hold Vol+/Vol-/, and insert USB cable.
5. Wait for it to kick into download mode, release buttons, and wait again.
6. See if ODIN recognizes it.
jmtheiss said:
First, see if you can find out which version of Cognition she was running (Gingerbread- or Froyo-based).
Once you have that information, I believe you should be able to download the appropriate ROM on you computer and copy it to the microSD card (adapter or whatever method you need to do to get it there). Since you can get into CWM recovery, you could try flashing the ROM from there. Assuming it's a full wipe rom (and you're not concerned about keeping apps installed on the phone), it should reset things to a more workable state. (If you are worried about apps remaining... I don't know what to say at this point, since you can't get to Tibu.)
If that doesn't work, you could try the one-click back to stock (realizing that you're having connectivity issues, I'll get to that in a second).
When you connect the phone in download mode to ODIN, does the yellow COM:# show up?
If you have tried ODIN on your Vista computer, try running ODIN as Administrator.
I've had some luck in the past getting the phone to be recognized (assuming Froyo) by doing this:
1. With nothing connected to computer, start ODIN (one-click to stock would be good).
2. Pull battery on phone.
3. Reinsert battery, but do not power on.
4. Hold Vol+/Vol-/, and insert USB cable.
5. Wait for it to kick into download mode, release buttons, and wait again.
6. See if ODIN recognizes it.
Click to expand...
Click to collapse
Thats my problem, the cappy does not see that there's an EX SD card there at all? says no files, but i've tried to push a cognition rom to the EX SD and use CWM to flash it to get it to boot, but the phone cannot see that there's an EX SD, but the SD card is fine, even my vibrant used it..
ODIN as ADMIN? tried that and nothing, still no yellow com port,
i know how to use odin, as my VIBE has been "Bricked" a few times lol
the vol up/down button combo does nothing, just shows up as a charging screen, the only way i can get the phone to download mode is through CWM.
the phone is running a FROYO based cognition ROM. or that's what her bf put on there.
This may sound stupid and simple but is the device set on mass storage from the settings menu? If you know.
Also have you tried mounting your sd cards in CWM?
Rhiannon224 said:
This may sound stupid and simple but is the device set on mass storage from the settings menu? If you know.
Also have you tried mounting your sd cards in CWM?
Click to expand...
Click to collapse
lol THATS MY PROBLEM> the phone thinks it boots normally, but i cannot get the settings menu. like the "SETTINGS APK" file was deleted when she formatted the SD!
but i was just playing around and i got google voice search to pop up!
then from there i used my WIFI and setup the google settings, then i went to the market grabbed CWM and used the cognition rom i've already downloaded, and used it!
then the GREEN CWM booted, and it still cannot MOUNT EX SD card. so the flash failed.. HMMMMMM
As of now i am gonna go into the rom i DLed (cognition) and try to DL Root explorer and hard push the Settings.apk file to the system. HOPEFULLY from there i can get my settings back to restore the phone.
Realizing that it's a long shot at best due to connectivity issues, have you tried using ADB?
If so, you could push the ROM you need to the internal SD.
so, used root explorer to move the NEW cognition froyo rom from the EXternal SD to the INTERNAL SD. from there i used CWM recovery to flash the rom, the rom flash was successful, but now the phone is stuck in bootloop on the AT&T world phone screen.
and CWM will not LOAD. FML
Looks like i'm gonna have to take this apart and get to the internal SD card. =/
Can you get to CWM with the Vol+/Vol-/Power combo - hold those past one AT&T screen and when you see the second one, let go?
Adb was not an option at that point, the phone couldn't recognize it even had a phone attached to it.
but now that i'm stuck in bootloop and with no CWM recovery OR DL MODE, yeah the jig isnt' workin... HAHA
i guess its just a paperweight now.. Owell, i tried.
i held it for about 3 mins... lol and the jig i got for my VIBRANT isn't workin either. I didnt know these phone's can lose the 3 button combo reset? i often flash I9000 roms to my vibe, thats why i have a jig, but i didnt think cappy's would do that unless i flashed an i9000 rom to it? lol
Just because I'm not sure if you tried it - have you tried plugging the cable into a different port on your computer? If it's not one directly connected to the motherboard, that can sometimes cause problems getting the phone to be recognized.
Also - does the phone show any signs of recognizing there is a cable inserted (like charging)?
tried every port. No the phone only acts as if it wants to display the batt charging symbol, but does not show, I cant believe it, i actually think i bricked a galaxy s.. haha
Another long shot, but you could try the One-click unbrick. Since it's Heimdall-based, there's always a chance.
Wow, didnt know that even existed. Definately gonna be useful for my Vibrant, haha i'll give it a shot.. THANKS, i'll report back after i try it.
I hope it does something. With the connectivity issues you're seeing it's starting to sound a little like hardware issues.
I'm going to throw out a checklist of stuff, knowing that you are already experienced with ODIN and ROM flashing, simply because I know I usually can use some sort of checklist to make sure I've caught everything.
- Redownloading/reinstalling drivers, rebooting before connecting phone
- Redownloading/reinstalling ODIN package
- Redownloading ROM to flash
- Hold V+/V-, inserting USB cable
- Remove battery, hold V+/V-, insert USB, insert battery
- Hold V+/V-/HOME softkey
- Hold V+/V-/HOME/Power
- If download mode reached, allowing phone to sit connected for long time
- If download mode reached, connecting phone after opening ODIN
- If download mode reached, connecting phone before opening ODIN
- If download mode reached, connecting phone after ODIN, disconnecting, reconnecting phone
That's all I can think of for a checklist of stuff to try/retry.
I appreciate the help but i've tried all of those options several times, The jig did work to get it into DL mode, but from there i'm still in the same **** position, my computer will not recognize that the phone is connected.
Is it possible that the phone somehow lost its drivers? what i mean by that is, the phone acts different with different USB ports, completely.
On one port it says unknown device, another USB android composite device.
Its as if the phone's changing as i change ports. Very FRUSTRATING!
i think it could be a hardware issue myself, but how could a corrupt drive work so well? To the T every time i've used the jig DL mode fired up, but my computer still cannot find the drivers to run it. Hell i've even tried using winusb drivers package to force install the phone, still no avail.
Like i said, I really appreciate the input, I figured if i couldnt figure it out, someone on here had some EXP in doing this lol i've just never had a driver problem give me so much trouble. IDK, bout ready to turn this paper weight into a pile of ash.
If you can get into cwm, have you tried doing another hard reset/factory wipe?
Thats the problem, earlier i COULD get into CWM, and hell i flashed the new rom perfectly!
now it is stuck bootlooping, therefore i just used the Jig, and first few times it didnt work, now its stuck bootlooping, download mode is attainable, and still NOT connecting to my pc via usb.
mrhaley30705 said:
If you can get into cwm, have you tried doing another hard reset/factory wipe?
Click to expand...
Click to collapse
Nvm, reread your post. Have you tried flashing a different rom?
PelvicThunder said:
Thats the problem, earlier i COULD get into CWM, and hell i flashed the new rom perfectly!
now it is stuck bootlooping, therefore i just used the Jig, and first few times it didnt work, now its stuck bootlooping, download mode is attainable, and still NOT connecting to my pc via usb.
Click to expand...
Click to collapse
Try a different computer? also, which version o of odin are you using? I've found 1.3 & 1.82 to work best.
My problem is I cant recognize my captivate to any pc because of a weird problem. So I have to use my extarnal sd somehow to flash my phone and hence to open&use it again.
Now after I open my phone it shows at&t screen for a while then open recovery mode. It occured after I apply lagfix.
I need help guys...
So your trying to flash a rom from the SD card without a computer? Have you got root already?
don't do school and stay in drugs?
Yes, lastly, I upgraded fasty UCKK4 and I was rooted. Then I tried to appy Lagfix and load the update.zip in extarnal sd and Set it up from CWM recovery. It was the last time to open my Phone after that So After My phone is opened it shows at&t screen and then goes to CWM recovery.
so I need to see external SD from CWM. But there is no such an option in it. Unfortunately My USB connection is not working. I cant find any alternative wayy
So I have a couple possible solutions try going to install from SD card go to external SD card and find the zip see if that does it if not try going to mounts and storage see if there is someway to mount the external SD card and lastly and most likely not to work would be to wipe the phone back to factory after that not sure let me know how that goes buddy
don't do school and stay in drugs?
Firstly I want to emphasis that I just can reach CWM mode in my captivate. No usb connection I have and no operating system can be opened. So I thought that I have 2 choice to repair my captivate;
1- there is may be an alternative way to see extarnal Sd inside so that to load the setup from there and fix the phone software again. I load a firmware and opened recovery mode and hit the reinstall. But it loaded from internal again. so npthing changed.
2- I must repair my phone's USB port to have an healty connection. Bacause it is now only charging. Is there any way to fix it easily that somebody knows? To date, I couldnt though I have tried thousands methods and drivers to ensure a connection.
so I am in trouble, I need a professional advise and help bra... !
Em_Tech said:
I load a firmware and opened recovery mode and hit the reinstall.
Click to expand...
Click to collapse
Do you have CWM, or stock 2e/3e recovery? If you have stock recovery, which I'm guessing you do because you referenced "reinstall packages," I suspect you are screwed.
If you have CWM, you might be able to do it. These menu choices are from CWM 5 from the Glitch kernel, so your options might be a little different depending on what you are using. On mine, under "Install Zip from SD Card," there's "Choose Zip from Internal SD" which for me is really my external SD. You should be able to flash your zip from here.
If you borked it up flashing a lagfix, I think you're going to have issues with anything you flash at this point. If you have an option in CWM to disable lagfix, you should try this first before you flash anything else. If you can't get anything else to work, you should be able to flash CM7 because it will repartition for you and fix what lagfix messed up, but you may not be able to get back to anything else afterward.
If you actually manage to get it up and running again, LEAVE IT ALONE! If you keep flashing, you're eventually going to end up in a situation that's not recoverable from recovery and you'll have a paperweight (if you're not there already).
In cwm recovery which I used is 2e , There are 4 options;
- reboot system
- reinstall packages
- wipe user data
- wiper cache data
as you can gues, I tried all options also added a firmware to extarnal sd and hit the reinstall packages, but it just reinstall lagfix which is in internal sd and it started to loop.
I think second option is to be applied anymore. I need to have repaired my captivate's usb port
Em_Tech said:
In cwm recovery which I used is 2e , There are 4 options;
- reboot system
- reinstall packages
- wipe user data
- wiper cache data
as you can gues, I tried all options also added a firmware to extarnal sd and hit the reinstall packages, but it just reinstall lagfix which is in internal sd and it started to loop.
I think second option is to be applied anymore. I need to have repaired my captivate's usb port
Click to expand...
Click to collapse
How do you know something is wrong with the USB? Have you tried going into download mode?
Sent from my (CM9) ICS i897 Captivate
Yes I got into download mode. There is no problem about that. But Pc dont recognize my phone. so it become useless.
Em_Tech said:
Yes I got into download mode. There is no problem about that. But Pc dont recognize my phone. so it become useless.
Click to expand...
Click to collapse
So download mode with the picture of the Android guy digging? You seemed confused because your title mentions download mode but you only mention recovery in your post.
Open up heimdall or Odin, it should recognize your phone
Sent from my (CM9) ICS i897 Captivate
I should have asked before, but have you gone through this entire thread? http://forum.xda-developers.com/showthread.php?t=1351224 The third section about connection issues would be most relevant to your situation.
It is exactly going into download mode. The problem is after getting into download mode it never recognizes with pc and hence with odin. So I gave up trying with odin and looking for alternative ways such as using recovery mode or anything else that I dont know and may be some professional knows.
Tu sum up, I cant have a connection between pc and Captivate because its usb port is not working properly(suddenly gone).
Captivate just can be open in download mode and in recovery mode. But because of usb port is not working I cant flash it. Recovery mode dont recognize external sd so I cant flash it again.
Note: Connection problem is npt a driver or cable issue. I am almost sure about this.
I understand your issue, the third section of the link I sent you was a list of ways to troubleshoot a non-working USB connection. I just figured I would check since these forums are littered with people who swear that they can't connect to their computer until someone tells them to try a new cable or USB port and it magically starts working. If you have already tried all of those steps, you are leaps and bounds ahead of most who come on here looking for help with this problem.
I asked because there is nothing that you can do at this point without a working USB port. You are only going to be able to flash whatever is named update.zip from your internal SD, which as you already know isn't going to help you at all. ClockworkMod Recovery would let you do what you need to do, but you're not going to be able to get it on there without either a working USB connection or being able to boot up normally.
Ok, so many posts about broken glass... I did not find one of my model so here it goes.
I broke my screen.
Well here's the situation. Already got another phone so will try to repair the screen somewhere...
But i need to do 2 things first.
1) recover the data in the internal memory
2) Flash a new rom (or do a factory reset if possible) and format the sdcard
The issue is that with the broken glass it's very difficult (duh), so what i need are the steps for getting to the mount USB in the CWM, and to the Format sdcard or factory reset
What i mean is something of the sorts of "3 times volume down, enter, 2 up, enter" etc etc
I checked download mode and it's working fine, Odin detects the phone, so basically i know it works.
So i'll go into CWM.... can someone guide this blind man? hahahahaha
Have the Semaphore Kernel for JB version 2.9.15
Thanks
Lordi
Have you tried to connect to the computer, it should show up as a removable drive. Also you could use the Samsung Kies software to upgrade the phones original rom, which would effectively reset the phone, all you would need to do is run Kies then connect the phone to the computer, switch the phone on and wait until the rom loads to the lock screen,unlock it and Kies should then connect to the phone.
[SOLVED]
OK, found the steps watching a video about another thing.
Basically you turn on the device using the 3 button combo to put into CWM and do: Up (4 times), Power, Up 2 times (power).
That mounts the USB.
Just for anyone who needs it.
Lordi
Thanks for sharing your solution!