Hey guys, I know this has been posted a few times, but I want to make sure I end up with the right stock radio. Can anyone link me to the stock Droid 3 radio? I unlocked for T-mo use for a while but my wife needs it for a while so back to VZW. Thanks in advance.
jason
The best bet is the 890 SBF link. Find the radio file there and flash it back.
tnofuentes said:
Hey guys, I know this has been posted a few times, but I want to make sure I end up with the right stock radio. Can anyone link me to the stock Droid 3 radio? I unlocked for T-mo use for a while but my wife needs it for a while so back to VZW. Thanks in advance.
jason
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=28817296&postcount=309
Here is a link to where I uploaded the stock 890 radio, just flash it via fastboot like you did the 883 radio, then restore your stock build.prop.
Skreelink said:
http://forum.xda-developers.com/showpost.php?p=28817296&postcount=309
Here is a link to where I uploaded the stock 890 radio, just flash it via fastboot like you did the 883 radio, then restore your stock build.prop.
Click to expand...
Click to collapse
Awesome, thanks! Here's hoping a saved my stock build.prop like a good boy!
Jason
hi.
I was using HTC One with Android Revolution and I would like to go back to stock.
unfortunately I have lost my nandroid and radio back ups (updated radio to latest one)
I was able to get nandroid backup from xda (thank you)
and restore it. however when I try to OTA update or factory reset it says security warning in bootloader
researching through google I realized that updated radio prevents me from doing OTA update and factory reset.
Is it possible to get a radio back up for bell or does anyone know how to make it work?
Thank you!
bibliog daniona
jkpark17 said:
hi.
I was using HTC One with Android Revolution and I would like to go back to stock.
unfortunately I have lost my nandroid and radio back ups (updated radio to latest one)
I was able to get nandroid backup from xda (thank you)
and restore it. however when I try to OTA update or factory reset it says security warning in bootloader
researching through google I realized that updated radio prevents me from doing OTA update and factory reset.
Is it possible to get a radio back up for bell or does anyone know how to make it work?
Thank you!
Click to expand...
Click to collapse
I am in a similar situation... I found the stock OTAs, which apparently have the stock radios. The only difference is that I don't want to go back to stock everything, just stock radio. Maybe we can help each other out?
h t t p : / / bugsylawson.com/files/category/216-otas/ <-- remove spaces, I am not allowed to post URLs...
I assume OTA_M7_UL_JB_50_BM_1.29.666.17_R-1.29.666.5_release_318664_signeddb6wjtuapczkgotc.zip the BM stands for Bell Mobility (assuming you are in Canada also).
Do you (or anyone reading) have an way to just extract the radio firmware and keep the root/ROM portion of my phone alive?
Reason is, the radios in Android Revolution HD for Canada I think are the Rogers ones, and I lost my HSPA+. Meaning I go between 3G and LTE (which is not too often).
Thanks in advance!
Did you guys ever find a Bell Radio File?
I am also looking for a Bell Mobility Radio.
vinistois said:
Did you guys ever find a Bell Radio File?
Click to expand...
Click to collapse
Here is my radio.img from my BM__001 phone. It's in a CWM recovery flashable zip.
https://docs.google.com/file/d/0B3TzI9suqxcwbzFxRFVETUZoOHc/edit?usp=sharing
eradicator006 said:
Here is my radio.img from my BM__001 phone. It's in a CWM recovery flashable zip.
https://docs.google.com/file/d/0B3TzI9suqxcwbzFxRFVETUZoOHc/edit?usp=sharing
Click to expand...
Click to collapse
Thanks! Curious if you are using the radio with the stock BM firmware or with a newer version firmware. Also how can I backup my radio using CWM so I can restore it if the provided radio doesnt work out for me.
ams75 said:
Thanks! Curious if you are using the radio with the stock BM firmware or with a newer version firmware. Also how can I backup my radio using CWM so I can restore it if the provided radio doesnt work out for me.
Click to expand...
Click to collapse
I'm not using that radio anymore. That radio was taken from my One the day I got it a month ago. I have since done the full GPE conversion and am using the radio that it comes with.
You can't backup your radio directly using CWM. You have to use dd and manually dump the radio partition to a file.
eradicator006 said:
Here is my radio.img from my BM__001 phone. It's in a CWM recovery flashable zip.
https://docs.google.com/file/d/0B3TzI9suqxcwbzFxRFVETUZoOHc/edit?usp=sharing
Click to expand...
Click to collapse
Alas, this link is dead. Anybody has an alternate location?
esternin said:
Alas, this link is dead. Anybody has an alternate location?
Click to expand...
Click to collapse
All M7_UL (except some asian CIDs) are now using the same radio version on lollipop: 4T.35.3218.16_10.33Q.1718.01L including Bell Mobility
which you can confirm when looking at the Bell Mobility RUU name: PN07IMG_M7_UL_L50_SENSE60_MR_BM_7.17.666.7_Radio_4T.35.3218.16_10.33Q.1718.01L_release_420193_signed.zip
and can be found here: https://www.androidfilehost.com/?fid=95916177934533840
Or can be extracted from any M7_UL 7.xx.xxx.x firmware. :good:
alray said:
All M7_UL (except some asian CIDs) are now using the same radio version on lollipop: 4T.35.3218.16_10.33Q.1718.01L including Bell Mobility
which you can confirm when looking at the Bell Mobility RUU name: PN07IMG_M7_UL_L50_SENSE60_MR_BM_7.17.666.7_Radio_4T.35.3218.16_10.33Q.1718.01L_release_420193_signed.zip
and can be found here: https://www.androidfilehost.com/?fid=95916177934533840
Or can be extracted from any M7_UL 7.xx.xxx.x firmware. :good:
Click to expand...
Click to collapse
Thanks!
I already tried that one, and my ex-Verizon phone (S-off, MID & CID adjusted, appropriate LTE bands enabled, build.prop changed to Bell/302610) still would not connect with a Bell SIM. I am now contemplating finding an older hboot/radio and trying to revert to 4..2-4.3. Do you have an opinion on this idea?
Hi
I have been playing around with my Atrix HD for quite a while now, installing almost all custom roms out there for MB866 (Found Gummy and Carbon to be the best, batakang and holoblur never worked for me).
Restored back to stock using RSD Lite many times (after editing the xml file, no problems)
The bootloader was of course unlocked during "all that".
Now here is the problem. After restoring to stock 4.1.1 (98.4.20.MB886.ATT.en.US) using RSD Lite, I updated to 98.5.38.MB886.ATT.en.US (small 6.2 MB Update recently released).Worked fine till here.
Then I downgraded to ICS and it also worked fine. What made things worse was when I checked for updates via About Phone--> System Updates and it prompted for an Update 98.4.20.MB886.ATT.en.US (the same i used to flash via RSD). But when the download finished, the phone is permanently stuck in fastboot mode with the following message:
----------------------------------------------
AP Fastboot Flash Mode (s)
10.9B(*) (sha-2e68372, 2012-11-17 23:33:08)
eMMC Info: Size 8GB
Device is LOCKED. Status Code:0
Battery OK
Transfer Mode: USB Connected
downgraded security version
update gpt_main version failed
Failed to hab check for gpt_backup: 0x35
failed to load GPT
CID Read Failure
Invalid CID Status 0x69
No SP Partition found
Fastboot Reason: Invalid GPT
----------------------------------------------
You can see the phone is locked and RSD Lite doesent work at all giving "phone returmed fail" or " invalid partition error (battery is charged atleast 70%).
Any help in restoring the phone to "something" will be highly appreciated.
One of the problem is that i cannot find stock files for the latest 98.5.38.MB886.ATT.en.US update anywhere
Secondly is there any way to unlock Bootloader in fastboot?
capricorn85 said:
Hi
I have been playing around with my Atrix HD for quite a while now, installing almost all custom roms out there for MB866 (Found Gummy and Carbon to be the best, batakang and holoblur never worked for me).
Restored back to stock using RSD Lite many times (after editing the xml file, no problems)
The bootloader was of course unlocked during "all that".
Now here is the problem. After restoring to stock 4.1.1 (98.4.20.MB886.ATT.en.US) using RSD Lite, I updated to 98.5.38.MB886.ATT.en.US (small 6.2 MB Update recently released).Worked fine till here.
Then I downgraded to ICS and it also worked fine. What made things worse was when I checked for updates via About Phone--> System Updates and it prompted for an Update 98.4.20.MB886.ATT.en.US (the same i used to flash via RSD). But when the download finished, the phone is permanently stuck in fastboot mode with the following message:
----------------------------------------------
AP Fastboot Flash Mode (s)
10.9B(*) (sha-2e68372, 2012-11-17 23:33:08)
eMMC Info: Size 8GB
Device is LOCKED. Status Code:0
Battery OK
Transfer Mode: USB Connected
downgraded security version
update gpt_main version failed
Failed to hab check for gpt_backup: 0x35
failed to load GPT
CID Read Failure
Invalid CID Status 0x69
No SP Partition found
Fastboot Reason: Invalid GPT
----------------------------------------------
You can see the phone is locked and RSD Lite doesent work at all giving "phone returmed fail" or " invalid partition error (battery is charged atleast 70%).
Any help in restoring the phone to "something" will be highly appreciated.
One of the problem is that i cannot find stock files for the latest 98.5.38.MB886.ATT.en.US update anywhere
Secondly is there any way to unlock Bootloader in fastboot?
Click to expand...
Click to collapse
"fastboot oem fb_mode_clear" should get it to stop booting into fastboot mode
The problem is the gpt partition is security locked and one of the fastboot commands thrown is to lock the phone into fastboot mode for every boot until the flashes are done. The command above is the one used to revert the first one (fastboot oem fb_mode_set if you're curious). Your bootloader isn't, or shouldn't I should say, locked again. The RAZR HD does the same thing if you directly flash a fastboot without removing the bad partitions and commands for unlocked phones flashing non-stock fastboots. The bad ones are the gpt partition and the oem fb* commands....there are a lot of guides that explain this and Mythtools (in AHD Developer forums) will do it all for you.
skeevydude said:
"fastboot oem fb_mode_clear" should get it to stop booting into fastboot mode
The problem is the gpt partition is security locked and one of the fastboot commands thrown is to lock the phone into fastboot mode for every boot until the flashes are done. The command above is the one used to revert the first one (fastboot oem fb_mode_set if you're curious). Your bootloader isn't, or shouldn't I should say, locked again. The RAZR HD does the same thing if you directly flash a fastboot without removing the bad partitions and commands for unlocked phones flashing non-stock fastboots. The bad ones are the gpt partition and the oem fb* commands....there are a lot of guides that explain this and Mythtools (in AHD Developer forums) will do it all for you.
Click to expand...
Click to collapse
fastboot oem fb_mode_clear doesnt work, i tried it before as well, mythtools also cannt help as device status is locked and if rsd cannt flash it i believe myth also cannt.and the reason i say its locked is because it does not respond to any oem command.
it probably got locked after the ota which failed
if i could find fxz for 98.5.38.MB886.ATT.en.US, it may be restored otherwise is there any way around to unlock bootloder from fastboot??
these are the only two options i can think of amoungst which later is has the least probability.......
capricorn85 said:
fastboot oem fb_mode_clear doesnt work, i tried it before as well, mythtools also cannt help as device status is locked and if rsd cannt flash it i believe myth also cannt.and the reason i say its locked is because it does not respond to any oem command.
it probably got locked after the ota which failed
if i could find fxz for 98.5.38.MB886.ATT.en.US, it may be restored otherwise is there any way around to unlock bootloder from fastboot??
these are the only two options i can think of amoungst which later is has the least probability.......
Click to expand...
Click to collapse
There isn't an fxz for that update yet. The one I would be able to make wouldn't include the correct gpt partition because I've flashed the Nextel fxz and none of the other gpt partitions from our stock fxz's will flash on my phone (there's a security lock on that partition). Though I know that between two or three of us here on xda, an fxz could be made with all the correct partitions from the update.
If you're positive that you were unlocked then just flash the Bell or Nextel 4.1.2 fxz's. They're not vulnerable to the heartbleed exploit which is the main reason that AT&T released the 98.5 update to begin with.
Have you tried "fastboot continue"? You might get lucky and the phone will at least boot up. And tried booting to recovery? Boot menu?
You can only unlock the bootloader from a rooted, running phone with ADB enabled. Can't do it in recovery or fastboot mode (unless you have a developer edition).
skeevydude said:
There isn't an fxz for that update yet. The one I would be able to make wouldn't include the correct gpt partition because I've flashed the Nextel fxz and none of the other gpt partitions from our stock fxz's will flash on my phone (there's a security lock on that partition). Though I know that between two or three of us here on xda, an fxz could be made with all the correct partitions from the update.
If you're positive that you were unlocked then just flash the Bell or Nextel 4.1.2 fxz's. They're not vulnerable to the heartbleed exploit which is the main reason that AT&T released the 98.5 update to begin with.
Have you tried "fastboot continue"? You might get lucky and the phone will at least boot up. And tried booting to recovery? Boot menu?
You can only unlock the bootloader from a rooted, running phone with ADB enabled. Can't do it in recovery or fastboot mode (unless you have a developer edition).
Click to expand...
Click to collapse
i tried bell's 4.1.2 earlier thinking the same as you said,but didnt work either, wont boot to recovery or boot menu.....
fastboot continue also takes to the old prompt...
capricorn85 said:
i tried bell's 4.1.2 earlier thinking the same as you said,but didnt work either, wont boot to recovery or boot menu.....
fastboot continue also takes to the old prompt...
Click to expand...
Click to collapse
IIRC, the Nextel (Mex Retail) is the highest version we have unless the new AT&T one supersedes it.
I've only seen this issue one other time over at the RAZR HD forums. With the latest KK OTA they had, his failed and the phone booted to a similar screen you have. Nothing has worked for that guy yet that I'm aware of (haven't checked in about a week now).
Have you tried manually flashing an fxz, not with RSD or Myth (though Myth does flash manually via a script but it skips the gpt partition, IIRC). I'd start with the ATT fxz and if it fails manually then I'd flash the Nextel one...after that I'm out of ideas.
skeevydude said:
IIRC, the Nextel (Mex Retail) is the highest version we have unless the new AT&T one supersedes it.
I've only seen this issue one other time over at the RAZR HD forums. With the latest KK OTA they had, his failed and the phone booted to a similar screen you have. Nothing has worked for that guy yet that I'm aware of (haven't checked in about a week now).
Have you tried manually flashing an fxz, not with RSD or Myth (though Myth does flash manually via a script but it skips the gpt partition, IIRC). I'd start with the ATT fxz and if it fails manually then I'd flash the Nextel one...after that I'm out of ideas.
Click to expand...
Click to collapse
Came here after trying all that
Tried manually flashing but the phone returns FAIL on EVERY command, same with myth tools it executes but nothing really happen in the phone, dont know what went so wrong with the OTA
i am just confused if i should let it be or keep trying until i find a solution
COuld battery charge level be the problem, when it all started it was more than 70 percent and i didnt keep it on for long. it says battery ok but dont know whats the exact battery level as fastboot oem battery-status or voltage level are also restricted
Well, it seems that skeevydude told you all I want to say
Solved: Using Nextel (Mex Retail)
Thanks all for your replies
The device is alive now after restoring to Mexican Retail using RSD (editing the xml file and deleting ONLY the two lines having getvar)
Myth Tools never worked, RSD DID!
BTW the mexican retail is much much better than the ATT version because:
It gets rid of the ATT bloatware
SPecially the att address book
Hotspot is working out of the box
its speedier
android version is upgraded (4.1.2 instead of 4.1.1)
provides an option of manually switching to 2g/3g
and much more
thanks skeevydude, nextel was the last option remaining anyway...........and it automatically fixed the gpr issue
capricorn85 said:
Thanks all for your replies
The device is alive now after restoring to Mexican Retail using RSD (editing the xml file and deleting ONLY the two lines having getvar)
Myth Tools never worked, RSD DID!
BTW the mexican retail is much much better than the ATT version because:
It gets rid of the ATT bloatware
SPecially the att address book
Hotspot is working out of the box
its speedier
android version is upgraded (4.1.2 instead of 4.1.1)
provides an option of manually switching to 2g/3g
and much more
thanks skeevydude, nextel was the last option remaining anyway...........and it automatically fixed the gpr issue
Click to expand...
Click to collapse
Isn't it already stated somewhere that if you are going to downgrade or change versions, you need to delete those lines anyways?
palmbeach05 said:
Isn't it already stated somewhere that if you are going to downgrade or change versions, you need to delete those lines anyways?
Click to expand...
Click to collapse
Yes it is, but thats only for upgrade, if downgrading the gpt line also need to be deleted, as i was not downgrading, only those two were required to be deleted which need to be specifically mentioned to avoid confusion
capricorn85 said:
Yes it is, but thats only for upgrade, if downgrading the gpt line also need to be deleted, as i was not downgrading, only those two were required to be deleted which need to be specifically mentioned to avoid confusion
Click to expand...
Click to collapse
I told ya Mex Retail would work....
skeevydude said:
I told ya Mex Retail would work....
Click to expand...
Click to collapse
It is worth a shot for me too!
I have RSDLite and attempted to flash. It gives me error about unknown <getvar>. Deleted those line(s) according to another post I found.
Then everything passes but I am stuck on the Fastboot Flash Mode?
God I will be happy when uncle same gets through with my son so he can help is ole man, lol.
---------- Post added at 06:14 PM ---------- Previous post was at 05:55 PM ----------
PROGRESS! I recalled skeevydude saying to stay alway from front USB ports and moved to back one and I now also have the Mex Retail version working. What a relief.
Now the bearing question is should I move on to another version like carbon or holoblur?
If ok to stay with this version, meaning will NOT get busted out by AT&T by using hotspot?
What do you recommend skeevydude?
Thank you so so so much.
Woody
Mexico Retail link
can someone provide me any link of Mexico Retail stock rom? Please.
ErickST18 said:
can someone provide me any link of Mexico Retail stock rom? Please.
Click to expand...
Click to collapse
http://sbf.droid-developers.org/phone.php?device=7
quasihellfish said:
http://sbf.droid-developers.org/phone.php?device=7
Click to expand...
Click to collapse
Thanks man
Pleas hlep me for alive my set thanks advance
dear i have a working phone MB886 with jellybean 4.1.1 unfortunately i flash the custom ROM of kitkat but set is dead i tired to alive the phone with myth tools rsd lite but no success my phone boot-loader locked i try to unlock the boot loader but nothing please anybody send ma working link of flash file Mexican or any other which are flash with rsd lite easily i am very thankful of that plzzzzzzzzzzz customer on my neck sorry for my bad English
shamshadhashmi said:
dear i have a working phone MB886 with jellybean 4.1.1 unfortunately i flash the custom ROM of kitkat but set is dead i tired to alive the phone with myth tools rsd lite but no success my phone boot-loader locked i try to unlock the boot loader but nothing please anybody send ma working link of flash file Mexican or any other which are flash with rsd lite easily i am very thankful of that plzzzzzzzzzzz customer on my neck sorry for my bad English
Click to expand...
Click to collapse
Please stop whining and being pathetic and actually search for moto sbf files. A new site popped up and comes up very easily. No need to make us die of laughter at someone begging for an sbf like a guy begging to get with a girl b/c he's thirsty. Smh lol
Sent from my ATRIX HD using XDA Free mobile app
need working link of file
i search everywhere but no file found i need file if anybody have so please share with me or upload thanks
quasihellfish said:
http://sbf.droid-developers.org/phone.php?device=7
Click to expand...
Click to collapse
Need 4.1.1..where can I find it? Tyvm
Good afternoon,
I'm trying to fix this XT890 from my cousin which has no baseband or IMEI. Assuming partitions are fine and it is just a matter of reflashing radio, how should I proceed?
What I did so far:
- Unlocked bootloader using official method (can I lock it again?)
- It was with Android 4.4.2, I tried to downgrade to 4.1.2 thinking it would fix the radio but it didn't. I was unable to flash motobp while downgrading, so I removed it from xml.
- I tried BP Tools but it says Invalid ulogo or something.
Thanks in advance!
Anyone? Please! I just need some guidance
I've flashed a kitkat stock and accidentally applied the wrong firmware and broken the modern I think.
Can anybody point me to the stock mm EU for the xt1092?
Thanks
Lugs
varignet said:
I've flashed a kitkat stock and accidentally applied the wrong firmware and broken the modern I think.
Can anybody point me to the stock mm EU for the xt1092?
Thanks
Lugs
Click to expand...
Click to collapse
https://firmware.center/firmware/Motorola/Moto%20X%20%282nd%20gen-2014%29/Stock/XT1092/VICTARA_RETEU_XT1092_6.0_MPE24.49-18_cid7_CFC.xml.zip
Many thanks, when I attempt flashing it with twrp I get a missing inf error.
Any chance of pointing me to the Motorola radio modem firmware files?
varignet said:
Many thanks, when I attempt flashing it with twrp I get a missing inf error.
Any chance of pointing me to the Motorola radio modem firmware files?
Click to expand...
Click to collapse
It's fastboot image.
--
--
Thanks, that would explain it .
I suspect I might have broken something modem/radio related when flashing the stock KitKat earlier. I've now restored a nandroid mm6 resurrect remix.
it seems it's working now except I had problems receiving whatsapp sms verification messages.
Could you kindly check that my baseband kernel etc are OK and would not require reflashing? I'm on xt1092 in the UK with twrp.
Or should I flash just the modem files?