CyanogenMod 10 'Jellaxy'
Original thread here: http://forum.xda-developers.com/showthread.php?t=1793511
Project discontinued because there are by far better CM10.1 releases by Wayland_Ace and others.
Despite that, i got a new device and my good ol' SGA is now in hands of my wife. I hope, i could give something to the community. Thanx for everything..
Most credits go to 'TheWhisp'. So if you want to thank someone, Say thanks to him. He made most of this possible.
Another 'special' credit and a very warm 'Thank you' goes to 'erikcas' who helped me a lot in creating this release.
This thread is for development only. If your post is not development related, DO NOT post here. Post in the general thread. Any person not following these rules WILL receive an infraction, this is your only warning.
Introduction - First of all, We're all doing this as a hobby. This is not our job, so, please, follow these simple rules:
* Don't ask for estimated time of arrival (ETA). I will release a new build when I feel it's ready.
* Don't request any additional features. This is meant to be pure ROM from CyanogenMod sources, so any 3rd party features will not be added.
* Don't report a bug if it's already reported. Report bugs here (click)! and don't forget to mention that you're on Galaxy Ace
* If you use this sources, add us in the credits and let us know of your project.
* Keep this thread clean, use talk topic for chat. Post only development related things here. (bug reports, suggestions, possible fixes etc)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Functions / features that are not fully working:
1) Native USB tethering
2) Native Wi-Fi tethering
3) Google Now (Voicesearch)
People who made this possible:
* TheWhisp
* rohan007
* michie
* hrk
* erikcas
* Wayland_Ace (for finally fixing camera)
* tilal6991
* KonstaT
* Maclaw
* CyanogenMod team
* marcin1147
Please contact me if I forgot you.
Download ROM: HERE
Older versions can be found: HERE
Sources: our github
Installation Instructions:
* Boot into CWM
* Wipe Data/Factory Reset
* Goto 'mounts and storage' and 'format /system' (Double check that you have selected /system and NOT /sdcard)
* Flash Archive
* After first boot, wait 2 Minutes before you enter your PIN.
* Do your own settings and reboot
I hope, you have a lot of fun with this one
Changelog
Release 08.09.2012
removed AMARULLZ script
added Google Apps
revert back to original framebuffer size in kernel. ROM should be more responsive now
Release 18/09/2012
completely compiled from sources by 'erikcas'
Removed Google Apps
Compressed arsc to free space in /system. Now you can flash gapps without deleting anything.
Youtube reboots should be fixed
BLN working (not fully tested with 3'rd party apps. Just check...)
Trebuchet Autorotation fixed
Removed duplicate camera icon
CRT animation now working ( = no flicker when screen is turning off )
Removed some things to free some space ( Video editor, ROM Manager, some pico tts languages = ~175MB system size)
Added ad-hoc support
Fixed KSM
Enabled WebGL
Fixed IO scheduler selection
Fully enabled triple frame buffer
Lot’s of changes by CM
Release 05.10.2012
CM Updates as of 02.10.2012
Camera working without preview
Autofocus working
Flashlight working
Panorama working with 'Camera ICS' from Market
Barcode reading working (As long as you can manage to place it correct above barcode without preview...)
Motion Blur in statusbar fixed (Thanks to 'kanpurite' for the hint)
Removed some 'big' ringtones for more space on /system
Release 19.10.2012
Android 4.1.2
zRam (compcache) working
CRT-OFF Animation working (Thanks 'bieltv.3')
Changes from CM as of 16.10.2012
Most interesting new CM features:
- XML cache for better performance
- New battery style 'Circle'
heapsize is 64Mb now
heapgrowthlimit is 32Mb now
back to standard GPS config
Release 05.11.2012
compiled by erikcas (only replaced kernel and device specific files by me)
new kernel config
data usage working (from new kernel)
ipv6 networking (from new kernel)
Waylands CameraHal (Camera working with Preview, Settings, Autofocus and Flashlight)
network location working
Changes from CM
Nice and smooth
added zipalign binary for script support
added support for userinit.sh scripts
new CM filemanager (although seems to be a memory hog...)
Release 03.12.2012
Audio fixed (no more initializing after flash. Notification sound bug should be gone)
New OOM Memory Management
Wifi should be more stable now and connect faster
Latest CM10 sources
SIO and KSM Settings fixed
Release 05.12.2012
Camcorder working
HQ Video and Youtube working
Release 04.01.2013
latest CM sources
size of /system massively reduced by removing ringtones
new property 'media.ringtone.force_repeat' which should force loop of ringtone
JIT compiler disabled by default for performance
heapsize limits changed (should prevent apps from FC)
Dithering disabled by default for performance
Notes:
- Due to the fact that in this latest release cooper device sources did not change, it has ONLY been tested for boot up. No further tests (wifi, bluetooth, etc..) were made.
- Some people report performance increases of UI by removing 'hwcomposer.msm7x27.so' from /system/lib/hw. This has not been tested by me. But you can try and report back here, if it really works. (As always: Don't forget to do a CWM backup first)
- As long as there are no significant changes in CM sources or improvements in device sources, there will be no new CM10 release after this one because focusing on CM10.1 from now on.
Notes about 'Google Now'
Google Now seems to be a general problem in many ROM's. For more information see this thread: http://forum.xda-developers.com/showthread.php?t=1747224 If someone wants to do something for this ROM, she/he can check out this thread if there's a solution for us.
Tweaking
Some people asked me, what i recommend to make Jellaxy more reponsible and faster. So here are my personal recommendations for tweaking.
Some words on Tweaking.
During the last weeks, i've read a lot of 'my rom is laggy' posts in general thread and here. I think some words should be said on this.
First of all, be aware that all those 'Turbo' scripts floating around do more or less ALL the same. They all manipulate system and kernel settings by writing values to special 'device files'. Most effective results are/were achieved by writing new OOM values to '/sys/module/lowmemorykiller/parameters/adj' and '/sys/module/lowmemorykiller/parameters/minfree'. Since ICS, writing to this device files via init.d scripts doesn't work anymore, because since ICS those values are overwritten with default values later during boot up. This is why i added code to Jellaxy which makes it possible to set this values in 'build.prop' (See here: https://github.com/Jellaxy/android_frameworks_base/commit/326ed3a470a610242eff753ac396e666598e089d). This is also, why Supercharger needs a patched 'services.jar' to work in ICS and JB. In the latest release of CM10, i already changed OOM values (based on OOM Calculator by zeppelinox) and lowered the max. number of hidden apps to 10 (See build.prop). I don't think that any script will make things 'revolutionary' better. However, you should always have in mind that:
278Mb stays 278Mb, whatever you do. No script in this world can change this
We are on JB and not an GB anymore. JB was never meant to run on devices with just 278 Mb of memory
So i recommend to try to run Jellaxy CM10 without any tweaking script first. Let it settle down and wait a day. Additionally try to limit max. number of Background processes to 4 in 'Developer Settings'.
Try to use swapping, if it makes things better for you or not.
If you want to try out a tweaking script, make a CWM backup first. So you can always revert back if something goes wrong. And always try only one script at a time and DO NOT flash all scripts that promise to give you 'the ultimate fastest machine on the planet'.
..2SD
Most of you will probably have noticed that for some reason most available scripts have an impact on performance. I recommend to use 'Link2sd' from Playstore. It's the only one i've found so far, which pushes apps, dalvik and system libs to SD without breaking performance.
Have a lot of fun with Jellaxy
good luck with that, meanwhile waiting for wayland git to make a stable cm9.
Greetings.
EDIT: i forgot! it's working with erikcas kernel on github?? i'm compiling a nimms kernel (experimental only) but i'm not sure which kernel are more stable...
I installed this one via CWM, but it wont boot, i only see new CM10 logo more then 20 min!
lagloose said:
CyanogenMod 10 'Jellaxy'
Special Remark for Galaxy Ace: Unfortunately Galaxy Ace is the only device where camera driver in kernel is not working yet. We're working hard to solve this problem.
Click to expand...
Click to collapse
FIT has that problem to strange isnt it FIT and ACE have 5MP camera and they dont work. GIO and MINI 3MP work lol... Some camera apps work on FIT so i think they will work on ACE NightVisionCam, twisted camera.
I think problem could be that camera isnt properly recognized all camera apps think that camera is 3MP and we cant put 5MP
Ill tell you this now, this rom is super super smooth, launcher is great and super super fast! Man great job
If you have any questions or want to discuss this ROM, please use the general thread which I've made to prevent spam in this thread.
Does not boot
After installation, i can see a boot animation and that is all, so it does not boot.
Ulrickno94 said:
After installation, i can see a boot animation and that is all, so it does not boot.
Click to expand...
Click to collapse
Partition your SD card, also use the general thread for these kind of posts in the future.
Google Now doesn't work. It says that there are some problems with sound. Any one else has this problem?
Bug-Music does not appear in any music app
Update: I have fixed the problem, you have to delete the .nomedia files located in the music folder, sorry for inconvenience
deep sleep doesn't work after flashing gapps
Any way to get this ROM booting without SD card partitioning?
King ACE said:
Any way to get this ROM booting without SD card partitioning?
Click to expand...
Click to collapse
No, it NEEDS Ext to work.
My app camera freezes cant even take 1 photo. Anyone facing this prob? Keep yhe good work lagloose! :thumbup::beer:
Sent from my GT-S5830 using xda app-developers app
Drumlistik said:
My app camera freezes cant even take 1 photo. Anyone facing this prob? Keep yhe good work lagloose! :thumbup::beer:
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
Camera cant capture images. Y U NO READ OP?
---------- Post added at 07:27 PM ---------- Previous post was at 07:26 PM ----------
Kattra said:
No, it NEEDS Ext to work.
Click to expand...
Click to collapse
Guess that should be added to OP.
On-T : Why does it REQUIRE a partition?
King ACE said:
Camera cant capture images. Y U NO READ OP?
---------- Post added at 07:27 PM ---------- Previous post was at 07:26 PM ----------
Guess that should be added to OP.
On-T : Why does it REQUIRE a partition?
Click to expand...
Click to collapse
Try deleting Amarullz's script in /system/etc/int.d from the zip package and flash it.
_____________________
The ultimate HD experience
& James Bonds likes it™
Hmm, should also work without ext partition. Will check tomorow..
Sent from my GT-S5830 using xda app-developers app
lagloose said:
Hmm, should also work without ext partition. Will check tomorow..
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
Else you can create an ext partition in CWM, backup your SD first
so is this similar to maclaws jelly bean or what? can somebody write what is fully working please?
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
To be honest, this is not tablet mode at all, it has nothing to do with silly build.prop hacks. This is the first and only Android rom to feature true Hybrid mode. This rom lets you scale and project every app, every widget, even systemcomponents individually. Remember, android is modular, everything is an app: Lockscreen, navigationbar, dialogs, popups, keyboards, widgets, and your regular apps of course. Apps have the capability to switch into various designs or layouts according to the device they run on. This can result in a complete new experience as many apps will transform to the better.
Now for every element that you like chose a mode (PhoneUI, Phablet/Nexus-7UI, TabletUI) and/or a size. You are 100% independent of the system DPI which runs nicely in whatever value it has been assigned to. You do not need to boot your phone into a certain DPI. Neither will most of the changes you apply require a reboot. You will not suffer from the myriads of troubles which normally haunt you under build.prop tablet mode. Your market, phone, etc. will all work, apps won't shrink on you unless you shrink them yourself. This project will entirely transform your device, but retain the aesthetics and the feel of your phone.
This is work in progress, this means not everything is properly fixed or resized, so please, report bugs only and not resizing issues, as I will resolve them, if you have proper values or strings to make it look better, I will receive them, thanks!
Make sure you have CWM Installed
Make a full backup, as with every other ROM
Wipe cache/data
Wipe battery stats
Download ROM and install: pa_tass-3.15-26ABR2013-020332.zip
Install this kernel: http://d-h.st/obb
Install this update: http://d-h.st/qHP
Reboot
Install GApps from KonstaT: http://www.mediafire.com/?ss5khtjf9a5v4s9
Wipe Cache Partition
Reboot and enjoy
The webpage: http://www.paranoid-rom.com/
You want to port PA? Take a look here: http://forum.xda-developers.com/showthread.php?p=27558806
Themes and other goodies you can find here: http://forum.xda-developers.com/showthread.php?t=1646034
Go to Settings, System, Font size, set it to NORMAL
Check "Auto Hide" in Settings, System, Statusbar, to finally get Fullscreen
If you have an issue and you want to call my attention, here's what you do:
1. Try everything you can, find solutions for yourself. Wipe caches, revert all your settings you have made, factory reset if you have to or reflash the rom. Assume that the issue is on your side and try your best to isolate it.
2. Search this thread and Cyanogenmods aswell (its the base) for possible reoccurences of your issue and hopefully solutions that may have come up.
3. If you think the issue is important enough that we should cease my work and look into it, post your issue, BUT ...
... stay friendly, do not demand anything, do not threaten
... explain your issue as precise as you can, name the exact apps and conditions that cause trouble, help us to replicate the issue right away. If we can't there's no way we can fix it and your post will simply clutter the thread
... collect evidence, keep in mind this is a developer thread so even if you are not one, do us the favor and research how to record logcat. logcat is the single most important help you can give us to resolve your issue.
ParanoidAndroid team
D4rKn3sSyS - Donate to him! : http://forum.xda-developers.com/donatetome.php?u=3484876
Jellaxy team - www.jellaxy.com
TheWhisp - Donate to him: http://forum.xda-developers.com/donatetome.php?u=4148720
FalzaL3040 - for supporting me!
Roman_Likachev - Original idea.
AOSP/Google
CyanogenMod
XDA
AOKP
aaronpoweruser
molesarecoming
erikcas
androidarmv6 TEAM
users
etc
pa_tass-2.20-12OCT2012-135815:
First release
ICS Kernel
Built from source - ParanoidAndroid 2.20
Using Jellaxy CM10 sources
Bugs from CM10
pa_tass-2.21-13OCT2012-195015:
Using lastest Jellaxy and ParanoidAndroid sources.
ParanoidAndroid 2.21
Removed bootanimation.zip until I resize it
Fixed Adreno 200 crash when booting
Linaro 4.7 - kernel optimized
Phablet UI should work - Use User interface section in ParanoidSettings and change everything to Phablet.
Weather in lockscreen - other things by mr.faridcom
pa_tass-2.21-14OCT2012-150213:
YouTube fixed.
Lastest Jelly Bean kernel by TheWhisp (thanks!):
Enabled triple framebuffer
Improved CRT animation
Data counter should display used data correctly (available since the previous build)
Using new RIL class (thanks again TheWhisp)
Removed CPU usage from Adreno driver completely
Newest CyanogenMod sources (There are new settings for battery icons!)
Tablet UI should work too (use User Interface settings - DO NOT USE Workspace settings)
Added bootanimation again, resized - Thanks to yackovsky
Removed Trebuchet for now until I take out useless things from the sources
GPS working, at least for me
pa_tass-2.22-15OCT2012-180623
ParanoidAndroid 2.22
Newest Qualcomm Display sources from CM (newer hwcomposer and other things)
Rebuilt Qualcomm Media libs using Jellaxy repository (OMX libs), YouTube should work fine.
Deep sleep tweak by [email protected]
Not much significant changes from the last build, so you can continue using it but you won't have any support from me.
pa_tass-2.22-16OCT2012-204133
Lastest Paranoid sources
Included new universal-dpi ParanoidSettings
Deleted useless things in Trebuchet, it's only 2mb now.
Included "not crashing for now" ParanoidWallapers, they can be applied but they haven't been resized
Lastest kernel from TheWhisp repo.
Other things that I don't remember about.
Legacy Camera not included - download here http://www.mediafire.com/download.php?0d7hnb0n96waiix
pa_tass-2.23-17OCT2012-200750
ParanoidAndroid 2.23
Legacy Camera included again
Lastest ParanoidPreferences, Launch section works, and fine, you can select Tablet, Phablet, and Phone UI normally, as you would expect.
Some Linaro strings have been added/included in the compiling of the kernel.
Things I don't remember
pa_tass-2.52-02NOV2012-170917.zip
ParanoidAndroid 2.52
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!TEST BUILD!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
This build was built using a remote Jenkins server for testing
New camera HAL from TheWhisp included (Not tested through)
Newest Paranoid Preferences
Newer releases are going to be based on AOSP 4.2 and not CM10 (this is a ParanoidAndroid team change)
Please don't bother asking or reporting for bugfixes, I wrote it, you have read it, this is A TEST BUILD and will be the last one based on 4.1.2
pa_tass-2.99-22NOV2012-223555
ParanoidAndroid 2.99 - EXPERIMENTAL - still 4.1.2
Rebuilt from scratch
Camera now working properly - new HAL works
Lastest Jellaxy sources
Lastest TheWhisp ICS (just added triple framebuffer) kernel
Please take note, this build is EXPERIMENTAL, the changes that have been introduced to PA since 2.54 may not work as expected, as PA 2.99 is not an official release lol
BUG: ParanoidPreferences doesn't work properly, and for now I'm not going to fix that.
pa_tass-2.99-13DIC2012-071533
Built again from scratch
Using erikcas kernel for now.
Lastest sources from Jellaxy.
YouTube works in HQ, and very nicely (there is no lag, tested by myself)
If anyone had a problem with camera, the picture saving should work now - NO CAMCORDER, DON'T ASK FOR IT!!!!
BUG: Bluetooth not working for now
pa_tass-2.99-13DIC2012-164440
Bluetooth working
Fixed little bug with graphic driver
Still using erikcas kernel until I get Linaro to compile the kernel and not make a mess with the graphic driver.
pa_tass-3.15-24ABR2013-114139
INITIAL RELEASE
TEST BUILD
Kernel fails to install, please download the kernel listed above. (it's a problem with the updater scrfipt)
There are a lot of bugs, please don't report them, specially the ones about PA Prefs.
pa_tass-3.15-26ABR2013-020332
Merged some layout fixes, thanks to these people: millo1978, hrk, Doc_cheilvenerdi.org, icebbar, which was originally contributed to CM-10.1
Kernel has been Linaro optimized, added a new governour (SmartAssH3)
Using a older version of PA Prefs, to get some things to work.
Updated android_system_core to set correct permissions for the paranoid settings.
Specific ParanoidAndroid changelogs here: http://paranoid-rom.com/forum/changelogs-news
Older builds may be found here: http://www.mediafire.com/?7y9dddh70pep5
Additional packages:
Soon.
How to set the workspace mode
How to change an apps Layout and size
BANNERS
Screenshots:
Paul L. said:
Screenshots:
Click to expand...
Click to collapse
looks real awesome..thanks!
what the difference from http://forum.xda-developers.com/showthread.php?t=1931749 ?
songolas77 said:
what the difference from http://forum.xda-developers.com/showthread.php?t=1931749 ?
Click to expand...
Click to collapse
This is compiled from source, is not a port
ParanoidAndroid from PAC is version 2.15, and this one is 2.20 (and soon will be 2.21)
This does have the ICS kernel from TheWhisp, that means data counter and limiter works
Uses Android 4.1.2 and instead of PAC Android 4.1.1
This is only ParanoidAndroid, PAC is a combination of AOKP+CM10 and PA, but it isn't updated yet.
Anyway, we (FalzaL3040 and me) are collaborating eachother for make things work better. Probably he will use this ParanoidAndroid and import the features from PAC (or import features from this ROM to PAC) and publish a new release.
Would it be possible to set lowest dpi on sliders to 70 in next release? Phablet ui looks smashing in 70
Paul L. said:
This is compiled from source, is not a port
ParanoidAndroid from PAC is version 2.15, and this one is 2.20 (and soon will be 2.21)
This does have the ICS kernel from TheWhisp, that means data counter and limiter works
Uses Android 4.1.2 and instead of PAC Android 4.1.1
This is only ParanoidAndroid, PAC is a combination of AOKP+CM10 and PA, but it isn't updated yet.
Anyway, we (FalzaL3040 and me) are collaborating eachother for make things work better. Probably he will use this ParanoidAndroid and import the features from PAC (or import features from this ROM to PAC) and publish a new release.
Click to expand...
Click to collapse
Tks, good work, bro !
yay..i just online and got happy news...
Sorry.. Cant tolerate the whining of some rude babies on XDA anymore.. If a person makes a mistake, everyone just have to "quote" them and just write crap about them like they are so perfect..
To the Developer, great rom, all the best in the future.!
Please delete this post.
hp_vercetti said:
Hey, @FaIzaL3040, thanx for the amazing rom.. the thing is i really messed up with paranoid settings.. can i get the default backup file or can you post the default settings please? It would be really helpful.. Thanx in advance.
Click to expand...
Click to collapse
Wrong thread ! this is the thread of PA by Paul L
Thanks man downloading...
GT-S5570 with Forum Runner
awesome thanks for d rom
galaxy mini never dead.. thanks dev good work...!!
Sent from my GT-S5570 using xda app-developers app
Someone tested this ROM? How do you exercise?
NqX said:
Someone tested this ROM? How do you exercise?
Click to expand...
Click to collapse
Works good, can't complain
yackovsky said:
Works good, can't complain
Click to expand...
Click to collapse
Agreed!
Enviado de meu GT-S5570 usando o Tapatalk 2
NqX said:
Someone tested this ROM? How do you exercise?
Click to expand...
Click to collapse
you can test it works perfecltly for the moment.......
More problems. İ am turn back cm7.2 thanks
GT-S5570 with Forum Runner
Hi people,
I managed to compile and run (yes, run!) cm 10 on our little wildfire. Since I need my phone
currently I can't test a lot myself, if you are interested, you can download and install it from
the link below. Basically eveything works as in ErwinP's cm 9 roms, so many thanks go to
him and all the others working on cm 9 and cm 10 for the buzz.
The ones to download are stripped of some languages and fonts, for the Camera I use
Camera ICS from the play store and it works well, yet without video recording.
I also stripped down the gapps, removed the faceunlock stuff and the Thinkfree live wallpaper,
since /system gets pretty full otherwise. Note, however, that this rom and gapps is untested,
and I would be happy to get some feedback about them.
Now the interesting stuff, download here (finally with the link!):
https://docs.google.com/folder/d/0B0NSiPyMpXaHQlZ5M0FuZUF2VjA/edit
and the sources can be found at https://github.com/bendus
All files can be flashed and used as a rom as they are,
the differences are in the languages that are included:
lang_small - only en, fr, de, it, and es, to save /system space.
lang_full - all languages are there (takes 20 MB more /system space)
And I will only build the lang_small variant unless there is some request
for a lang_full version or I have some time to spare.
version 2013-01-24, changelog see my github, hopefully a little less laggy.
version 2013-01-25, changes:
* changed back to use mdpi locales instead of ldpi since they seem to be more up to date
* removed the Torch and Gallery app, someone please tell me if the Gallery in the older rom
works and I will put it back in.
* additional version with all languages, to be found as ...lang_full...zip the other one
is now called ...lang_small...zip
versions 2013-02-06 and 2013-02-07:
* minor changes, mostly updates from the main cyanogenmod repositories.
* 2013-02-06 includes the local overlay files
* 2013-02-07 just uses the cm overlays, might have some resize issues,
but I am hoping to fix the data usage graph and maybe other things.
versions 2013-02-16 and 2013-02-23:
* updates from the cm repositories
* 2013-02-23: experimental! build which uses different libraries, use at
your own risk (and maybe tell me if it works at all.. )
2013-02-23 does not work so I removed it from the download directory.
version 2013-03-04:
* updates from the cm repositories
* uses the cm7 kernel, so it might break things, please test.
version 2013-03-10:
* updates from the cm repositories
* uses ErwinP's kernel (again)
* uses only cm overlays except an autobrightness fix
New version 2013-03-11:
* updates from cm
* uses ErwinP's ics kernel
* hopefully fixes the large PIN entry screen
New version 2013-04-21:
* updates from cm
* hopefully fixes the audio interference bugs when listening to media
* re-introduced some of the custom overlays from ErwinP
* removed Email, Exchange2, and CMWallpapers from the system apps
to free space on /system
New version 2013-05-04:
* updates from cm
New version 2013-08-01:
* updates from cm
* integrated kernel build, things may or may not work.
* WiFi doesn't work -- it works with the 2013-05-04 build.
New version 2013-08-20:
* updates from cm
* integrated kernel build
* fixed wifi
New version 2013-09-07:
* updates from cm
* "fix" for camera, please test!
* WiFi doesn't work.
New version 2013-10-06:
* updates from cm
* fixed WiFi
* full languages version available as '...-lang_full.zip'
New version 2013-12-23:
* Merry-Christmas-build
* updates from cm
New version 2013-12-26:
* screenshots work but sometimes skewed
* previews in recent apps (related to screenshots) work but also skewed
bugs found so far:
* screenshots don't work perfectly
* gps sometimes takes a long time to start up
* no data usage graph
* no battery usage details
* phone audio and media playback interfere sometimes
* 2013-02-07 build: autobrightness doesn't work
and, thanks to nrjwgh, see:
http://forum.xda-developers.com/showpost.php?p=37153834&postcount=31
Flashlight toggle and torch app don't work...flashlight doesn't turn off after being switched on by torch app....needs battery pull...
Screenshots you already know...
Dialer needs resizing after rotation...
Google now and search doesn't work...closes after opening...
Click to expand...
Click to collapse
screenshots, again thanks to nrjwgh:
http://forum.xda-developers.com/showpost.php?p=37131964&postcount=27
thanks to arjunrk67:
http://forum.xda-developers.com/showpost.php?p=37918315&postcount=155
http://forum.xda-developers.com/showpost.php?p=37918922&postcount=156
MTD partitions
I never changed mine, so the stock partitions work. Note that /system gets pretty full
with jellybean so 250 MB is already on the low side.
Note 1
This rom is built from the cyanogenmod sources, so please don't ask me to exchange apps,
e.g. the keyboard or the launcher, with non-standard and maybe even closed source ones.
This can be done with user apps from the market, I use the Nova Launcher and sometimes the
TouchPal keyboard myself, but the standard ones, i.e., Trebuchet and latinIME will stay in this rom.
However, some people know how to modify roms, feel free to change whatever apps you don't
like and post the resulting rom.
Note 2
I don't believe in tweaking scripts and unless you really know what you are doing, I would stay away
from them. This is just MHO, but it was asked for a few times and it seems that this supercharger
thing seems to work but I trust the source more.
cheers, bennii.
bennii said:
Hi people,
I am not (yet) allowed to post in the dev forum, so I post here for all of you who are interested.
I managed to compile and run (yes, run!) cm 10 on our little wildfire. Since I need my phone
currently I can't test a lot myself, if you are interested, you can download and install it from
the link below. Basically eveything works as in ErwinP's cm 9 roms, so many thanks go to
him and all the others working on cm 9 and cm 10 for the buzz.
The ones to download are stripped of some languages and fonts, and I removed the native
Gallery app as it doesn't work on the buzz. I use Camera ICS from the play store and it works
well, yet without video recording.
I also stripped down the gapps, removed the faceunlock stuff and the Thinkfree live wallpaper,
since /system gets pretty full otherwise. Note, however, that this rom and gapps is untested,
and I would be happy to get some feedback about them.
Now the interesting stuff, download here:
sorry... the forum rules say that I can't yet post outside links before having 10 posts... :/
Cheers, bennii.
Click to expand...
Click to collapse
Thanks to Compiling this rom
Can i have a download link to test this rom :good:
Re: [jb-4.1.2] 2013-01-22 rom from source
Yeah! Send me link ill post it. Here or write a story and ll post in dev whatever. Gotta test it lol :screwy::banghead:
Sent from my HTC Wildfire using xda app-developers app
Hey i'm interested too!
bennii said:
Hi people,
I am not (yet) allowed to post in the dev forum, so I post here for all of you who are interested.
I managed to compile and run (yes, run!) cm 10 on our little wildfire. Since I need my phone
currently I can't test a lot myself, if you are interested, you can download and install it from
the link below. Basically eveything works as in ErwinP's cm 9 roms, so many thanks go to
him and all the others working on cm 9 and cm 10 for the buzz.
The ones to download are stripped of some languages and fonts, and I removed the native
Gallery app as it doesn't work on the buzz. I use Camera ICS from the play store and it works
well, yet without video recording.
I also stripped down the gapps, removed the faceunlock stuff and the Thinkfree live wallpaper,
since /system gets pretty full otherwise. Note, however, that this rom and gapps is untested,
and I would be happy to get some feedback about them.
Now the interesting stuff, download here:
sorry... the forum rules say that I can't yet post outside links before having 10 posts... :/
Cheers, bennii.
Click to expand...
Click to collapse
I would love to test your rom/Give the download link so that I can give my feedback.
Re: [jb-4.1.2] 2013-01-22 rom from source
Kinda interesting
If it is running, it opens the doors for devs to port JB roms.
I hope this all seems true
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my HTC Wildfire using xda app-developers app
Odp: [jb-4.1.2] 2013-01-22 rom from source
if i understood u well, it is jelly bean rom which has bugs similar to cm9?? wifi works??
Wysyłane z mojego HTC Wildfire za pomocą Tapatalk 2
Can you send me the link? I'm interested to test it too!
Nevermind, saw your post in other thread and answered my questions.I'm Looking forward to see your rom, PM me
hi,
to answer your questions... basically everything *should* work, calling, mobile data, and, yes, wifi.
However, in the latest build I changed some stuff for the compilation to strip the rom down a bit
because otherwise /system gets full, especially with the big gapps.
I could not test these changes myself, so I have to wait for some feedback if I broke some things that way.
I told Erwin to post the link for me, and I sent a pm to some of you. Feel free to post it here, if he
has not done it yet.
cheers, bennii.
edit: I didn't test bluetooth, though.
Ok so someone send me that jb cmoon! Or post it alrdy :silly:
Re: [jb-4.1.2] 2013-01-22 rom from source
If the wifi works, i really want to know how u did it. Erwin and i and others have tested many things to get it working, but no progression.
Hazou
Sent from my GT-P5110 using XDA Premium HD app
Hazou said:
If the wifi works, i really want to know how u did it. Erwin and i and others have tested many things to get it working, but no progression.
Hazou
Sent from my GT-P5110 using XDA Premium HD app
Click to expand...
Click to collapse
Yeah, i just read that whole thread...
Hope someone will reply with some linkz or something
Re: [jb-4.1.2] 2013-01-22 rom from source
Hi could you send me the link of your rom ? Like that, i will make an miui v5 port for the wildfire, using your rom as base.
Sent from my HTC Wildfire using xda premium
testing... But yes, wifi, bluetooth, mobile data, and phone work. I do not test the GPS yet.
Re: [jb-4.1.2] 2013-01-22 rom from source
Sounds great, can you forward me the link please
Sent from my Wildfire using Tapatalk 2
Re: [jb-4.1.2] 2013-01-22 rom from source
That would be nice. If wifi and al works. Can u upload the wildfire device source files? Would gladly take a look into it to see the changes.
Sent from my GT-P5110 using XDA Premium HD app
@bennii : Could you send me the link please ! Would love to try it out and give feedback !! :laugh::good:
Oh a question... There is no problem if I want to revert back to cm9 after trying this one, right?
Hi you all
First I was planning to open a toppic in the development section where this ROM belongs, but I think it is better to start here. Here everyone can interact with Bennii and Bennii with the world, so it normally shouldn't take long before he can open (and maintain) his own post in the development section.
First the general warning: me nor Bennii are responsible for any physical or mental damage caused by this ROM. If you want to flash it, be our guest, but of course it is totally your responsibility! This ROM is based upon my CM9 source for buzz, but all fixes are found by Bennii himself
Changelog
Code:
[U]2013.01.22[/U]
[LIST][*]system.prop: remove "tweaks"
[*]Revert "place disable_ipv6 in the wlan0 folder"
[*]trackball wake
[*]cm.mk: remove wifi direct
[*]buzz.mk: add ldpi overlays
[*]buzz.mk: don't copy files to root/
[*]buzz.mk: skip libmm-omxcore
[*]add media_codecs.xml
[*]BoardConfig.mk: remove (unneeded?) audio build vars
[*]recovery.fstab: switch /sd-ext to type auto
[*]system.prop: remove net speed "tweaks" [/list]
[U]Initial release[/U]
[LIST][*]Boardconfig: fix build
[*]gralloc.h: build fix
[*]libcamera: build fix
[*]buzz: wifi fix
[*]buzz: audio fix
[*]build gpsshim[/LIST][/SIZE]
The link for 2013-01-22: click.
In this folder you can also find gapps for jellybean.
In priniciple, this ROM is good to use as a daily driver.
Note that this is not the latest CM version available, the latest one is Cyanogenmod 10.1, here we are talking about CM10.
After flashing gapps you system/ will take 250 mb, act accordingly and adjust your mtd partitions. If you don't do it, you'll see strange things like no audio, no lockscreen and/or no working home botton. I have setted up my system partion with 250 and everything works.
Do some optimization: overclock the cpu (691 is safe); disable poppup, dictionary, spelling suggestions and vibration when you type; disable as many window animations as possible; in Trebuchet, tick off merging of the app drawer.
What works
Basicly everything that isn't mentioned with "what doesn't work" or isn't tested yet.
You have a good mobile connection, wifi, gps signal and sound. You can make phone calls withouth a problem. Wifi hotspot is tested and works as well. If you report here, I/Bennii will try to keep up with things that are tested and should work.
Know problems
A lot of things have to be resized
Taking a screenshot doesn't work. This means that also the "recent apps" and the rotation animation give a black screen
The camera is not shown (I think it is because the gallery app force closes, I see that on CM10.1. You can use other camera applications though, like CameraMX. It works, but it is slow - if you come up with a fast alternative, let us know!
Only five languages are available, I have no idea why. Perhaps Bennii trimmed the system partition a bit too much? Either way, you can set language to only English, Deutsch, Español, Français and Italiano.
Sources, open for contribution
Bennii's github for the device repo
My kernel can be found here
The overlay repo is located here
Please, people, interact with Bennii as much as possible, so he can share his own ROM in a more appropriate way
All the best,
Erwin
Damn i love bennii
Good job mate!
This was previously home of the "SuperNexus 2.0 VibrantMTD BUILD 4-update2" ROM. If that's what you're looking for, try looking at the bottom of this post.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features:
Patched (SuperCharged) services.jar.
Zipalign apps in /system at every boot and apps in /Data every 48H.
CPU governors tweaks and improvements for better performance and battery life.
Increased SD Card read-ahead cache to 2048 Kb to improve SD Card write/read speed.
Sqlite and Database optimizing every 48H.
Network TCP tweaks.
Kernel, VM, and sysctl tweaks and improvements.
File system speedup.
Build.prop tweaks and improvements.
Cleans log files and tombstones at every boot.
Recommended Instructions:
Enter Recovery
Wipe Cache Partition
Advanced ⇒ Wipe Dalvik Cache
Flash SuperBoost
Reboot your device
Houston, we have liftoff! :victory:
Optional: You are welcome to install any of the SuperCharger scripts found here. Be sure to flash this first, however.
Issues:
Getting an error while flashing? Report it.
Downloads:
SuperBoost-M1 v1.zip - 1.77 MB
Changelog:
Code:
[B]SuperBoost-M1 v1 (06-04-13):[/B]
[LIST]
[*]Initial release.
[/LIST]
Credits:
slaid480
zeppelinrox
The mods and various tweaks contained in SuperBoost were created by the developers listed above, I merely took said mods and tweaks and put them all into a single flashable package. If you ever see any of the developers I've listed above around the various forums, be sure to thank them for their hard work! They deserve it! :good:
Old SuperNexus 2.0 VibrantMTD BUILD 4-update2 OP:
For future SuperNexus builds please refer to Faryaab's official thread here:
http://forum.xda-developers.com/showthread.php?t=2307367[/CENTER]
The main idea behind SuperNexus is to provide Vanilla Android experience, just like on Google's Nexus devices, to non-nexus devices. SuperNexus is entirely built from Google's AOSP Source. A lot of improvements and optimizations have been done to the Google's Source Code to have the best possible Vanilla Android Experience. SuperNexus is very light too as there are no 3rd party apps (ZERO Bloatware).
Big thanks to TeamHacksung (Donate To Them), the CyanogenMod Team (CM), and TeamKang (AOKP) as many features are cherry-picked from their source code.
System Details:
Android 4.2.2 Jelly Bean (JDQ39 - Android-4.2.2_r1)
Latest CM Kernel
All Jelly Bean Features and Apps (Nothing excluded from AOSP)
No Visual Changes!
Stock Jelly Bean Look and Feel
This will turn your Samsung Vibrant into a Nexus 4
ROM Features:
Fully Deodexed
Zipaligned APKs
Rooted (Super SU)
BusyBox Installed
No 3rd Party App
ZERO Bloatware
Android Source Code vastly improved and optimized (i.e. Bionic, Dalvik, Webkit, Framework, libcore, SQlite etc)
Official Jelly Bean Bootanimation (From Official Galaxy Nexus Android 4.2.1 Factory Image)
Init.d Support
Rsync Support
UserInit Support
Bash & Nano Support
Native SIP/VOIP Support
OpenSSH Support (ssh, sshd, scp, stfp)
HSPA+ Support
OpenVPN Support
Ad-Hoc Network Support
EXT4 File System Optimizations
Galaxy S Device Settings As An App
Large APN & SPN List
Framework Features:
-Extended Power Menu (Reboot, Recovery, Download & Screenshot Options)
-Improved Scrolling Cache
-Tweaked Animation Values Of Progress Spinners (Silky Smooth Loading Spinners)
-Enabled Rotation Lock Tile in Quick Settings for Phones (Previously was only enabled on Tablets)
-Increased Lockscreen Widget limit from 5 to 9
-Enabled Copy/Paste in Gtalk
-Options for switching between USB Mass Storage and MTP/PTP (On Specific Devices)
Camera Features:-
-Burst Shot (Up to 20 Images at once)
-ISO Mode
-Touch Focus Duration
-Power Shutter (Click Power Button To Capture Image/Video)
-Color Effects
-Shutter Timer
-Zero-Shutter Lag (On Specific devices)
-Control Zoom using Volume keys
-Touch-to-focus timeout duration settings
-Exposure and JPEG Quality settings in Video Mode
-HDR (High-dynamic-range imaging)
Browser Features:-
-Increased Maximum Tab limit from 16 to 64
-Incognito Tab Option (When long pressed on an URL)
-Option To Close All Tabs With One-Click
-Allowed Any Type Of File To Be Downloaded
-Enabled WebGL (Ultra smooth browsing)
-HTML5 WebSockets
Phone Features:-
-T9 Dialer Support
-Landscape Dialer Support
-Transparency To Incall Screen
-Noise Suppression
Miscellaneous Features:
-Allowed Installation Of Apps From Unknown Sources By Default
-Allowed Any Type Of File To Be Sent/Received Via Bluetooth
-Disabled Data Roaming By Default
-Removed Google's Software Updates Option from Settings
-Enabled Gesture Input By default
-Hardware Information of the device (Settings>About Device>Hardware Information)
Officially Supported Devices:
AT&T Samsung Galaxy S II SGH-I777
Samsung Galaxy Note GT-N7000
Samsung Galaxy S III GT-I9300
Samsung Galaxy S II GT-I9100
Samsung Galaxy S II I9100G
Known Issues
Found one ? Report it.
Screenshots:
Requirements:
Custom Recovery
Instructions:
Make a Nandroid backup
Copy Google Apps and SuperNexus ROM to your internal SD Card
Enter Recovery
Do a Wipe/Factory Reset (Necessary if coming from a different a ROM)
Go to Mounts and Storage ⇒ Format /System (Also necessary if coming from a different a ROM)
Flash SuperNexus ROM
Flash Google Apps
Reboot your device!
Voila!
Downloads
ROM:
SuperNexus 2.0 VibrantMTD BUILD 4-update2 (04-09-13) MD5: d78a8f022d51dd6b34e23f7786e23b96
Experimental Patches:
Experimental Performance Tweaks for SuperNexus V4 MD5: cbb297bde565208b797a43c015f6e27f
Google Apps:
Google Apps JB 20130301 MD5: B7E53E96E1C8B1A1C4865BF29418C8E0
Source Code:
SuperNexus Source @ Github (Faryaab is willing to add support for other devices so if you are a developer and willing to add support for your device(s), PM him)
CM Kernel Source @ Github
Changelog:
Code:
[B]SuperNexus 2.0 Build 4-update2 (04-09-13):[/B]
[LIST]
[*]Fixed WiFi
[/LIST]
[B]SuperNexus 2.0 Build 4-update1 (04-08-13):[/B]
[LIST]
[*]Swapped out Semaphore for the stock CyanogenMod kernel
[/LIST]
[B]SuperNexus 2.0 Build 4 (04-07-13):[/B]
[LIST]
[*]Initial release
[/LIST]
Credits:
Faryaab - Original developer of this ROM. Please, don't forget to donate to him if you like his work!
Google
CyanogenMod Team
Teamhacksung
Codeworkx
Xplodwild
Nebkat
Espenfjo
Pawtip
Chainfire
Aways
skinzy98
jrongi1
stratosk
First! Noob , I love ya NO HO3O Lol. I'm DLing NAOW!!! Miami Heat sun
---------- Post added at 03:08 AM ---------- Previous post was at 02:37 AM ----------
I didn't use the recommended gapps, I used the AIO from Slim and I'm having issues. I'll fix it :good:
nice
downloading and about to flash:laugh:
There's a bit of clipping on the stock kernel. Otherwise it's on point. Buhttah So Klean
Look at that stock might just have to flash it to see how the ports working. By the way you might want to include jrongi1 because those GPS changes were his if you used em
Sent from my GT-I9000 using xda app-developers app
great. Its fast and smooth
Sent from my SGH-T959 using xda app-developers app
Great rom, but i miss setting features from aokp, slim, xylon and so on.
Sent from my SGH-T959 using xda app-developers app
just want to know that your wifi not working. Over all seem working good. I find Semaphore kernel much better on camera.
Mostdef said:
just want to know that your wifi not working. Over all seem working good. I find Semaphore kernel much better on camera.
Click to expand...
Click to collapse
If WiFi isn't working how did nobody else notice this?
Sent from my GT-i9000 using xda app-developers app
skinzy98 said:
If WiFi isn't working how did nobody else notice this?
Sent from my GT-i9000 using xda app-developers app
Click to expand...
Click to collapse
The Wifi is gray out. Cant turn On/Off
Mostdef said:
The Wifi is gray out. Cant turn On/Off
Click to expand...
Click to collapse
Gotcha. It could have just been a ness up on this build.
Sent from my GT-i9000 using xda app-developers app
You're right, Wi-Fi isn't working. I'll look into this and see what I can come up with. Sorry everyone, I know it was working before in the first update. The only thing I can think of, is that it's an issue with the new CyanogenMod kernel. I'll do some troubleshooting and get back with you guys.
Probably should've checked this last night, right after making the kernel switch. Guess I made kinda made a... N00B ...mistake. Huh?
Edit: Yup, it's a kernel issue. If you're running the first SuperNexus 4/7/13 build, I suggest against updating to build4-update1 for the moment. If you've already updated, flashing the Semaphore kernel will fix the Wi-Fi issue. When I get home I'll look into solving the CyanogenMod kernel issue, but for now, stick with Semaphore. All be good with Semaphore.
Edit 2: Fixed the WiFi issues, checkout build4-update2. :good:
Sent from my SGH-T959
N00B_IN_N33D said:
You're right, Wi-Fi isn't working. I'll look into this and see what I can come up with. Sorry everyone, I know it was working before in the first update. The only thing I can think of, is that it's an issue with the new CyanogenMod kernel. I'll do some troubleshooting and get back with you guys.
Probably should've checked this last night, right after making the kernel switch. Guess I made kinda made a... N00B ...mistake. Huh?
Edit: Yup, it's a kernel issue. If you're running the first SuperNexus 4/7/13 build, I suggest against updating to build4-update1 for the moment. If you've already updated, flashing the Semaphore kernel will fix the Wi-Fi issue. When I get home I'll look into solving the CyanogenMod kernel issue, but for now, stick with Semaphore. All be good with Semaphore.
Sent from my SGH-T959
Click to expand...
Click to collapse
one thing ive noticed is that withports semaphore seems to work the best
Fixed the WiFi issue
skinzy98 said:
one thing ive noticed is that withports semaphore seems to work the best
Click to expand...
Click to collapse
True, however, I believe I've solved the issue with the CyanogenMod kernel. After a lot of trial and error, I narrowed down the culprit to the modules folder. After some research and a little mo' trial and error, I was able to find the module that needed to be swapped out.
Expect an update sometime tonight... With workin' WiFi baby! Aw yeah! :victory:
Update 2 out! Let the WiFi workz once more!
Just uploaded Update 2 (link in the OP), which should have working WiFi. Please let me know if any issues with WiFi still persist. If there aren't any issues, well, all I can say is...
Thanks everyone and enjoy!
If you got wifi problems flash my kernel build and that should fix it
Sent from my SGH-T959 using xda premium
N00B_IN_N33D said:
Just uploaded Update 2 (link in the OP), which should have working WiFi. Please let me know if any issues with WiFi still persist. If there aren't any issues, well, all I can say is...
Thanks everyone and enjoy!
Click to expand...
Click to collapse
haven't ran it officially yet, but would love this to come to the fascinate lol
rom looks solid
I can port it to the facinate for your own personal use if you want. Just wont post in forums
Sent from my SGH-T959 using xda premium
ztotherad said:
haven't ran it officially yet, but would love this to come to the fascinate lol
rom looks solid
Click to expand...
Click to collapse
cannondaleV2000 seems pretty eager to port it for you, so that's an option. Another option would be for me to type you up a guide on porting ROMs to your device (shout-out to skinzy98 and jrongi1). Either way works for me. If you're interested in the guide, don't hesitate to PM me.
Anyhow, I believe we may be getting semi off-topic. So, to get back on topic, I gotta ask... Is that WiFi a "hell to the yeah" everybody?
N00B_IN_N33D said:
cannondaleV2000 seems pretty eager to port it for you, so that's an option. Another option would be for me to type you up a guide on porting ROMs to your device (shout-out to skinzy98 and jrongi1). Either way works for me. If you're interested in the guide, don't hesitate to PM me.
Anyhow, I believe we may be getting semi off-topic. So, to get back on topic, I gotta ask... Is that WiFi a "hell to the yeah" everybody?
Click to expand...
Click to collapse
You know I wonder if that port applies to all phones as I just got a one s and will be using my vibe for testing
Sent from my GT-i9000 using xda app-developers app
°°°
Attention: This ROM is discontinued!
It still works great as a daily driver and got a large userbase, but as CM10.1 has been abandoned there won't come any new updates anymore!
After working really hard on it for more than 2 month(!) I proudly present my first CM10.1 T-Build :fingers-crossed:
I put lots and lots of effort into it to create a great, smooth and bugfree rom experience for you guys.
I tried to fix all huge bugs on CM10.1 like bluetooth fast forwarding and the wifi hotspot.
Additionally I took the time to create a non-neon gapps package, as the official 4.2 one does only support neon.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you appreciate all the effort that has gone into this ROM then consider a donation.
While it's neither expected nor required it is highly appreciated!
> Paypal Donate link <
Each donator will get a huge thank you and a private dance show
Preview (you can't wait for the leafs getting down now, can you!):
(and as I've been asked a couple times in the past: yes, you can send me an amazon gift card code via PM as wel!)
CM Known Bugs & Fixes:
This list shows what has been done so far.
As you can guess by the sheer amount of the fixed bugs there has been put lots and lots of time into this ROM.
And don't forget about all the awesome work pengus77 has put into the kernel - without him we would still suffer from bsods and huge battery drain.
Do NOT post or ask about stuff on the known bugs list!
The bug is listed here - I don't need to get reminded that it's there.
If there's progress or an ETA or anything we will post about it - if not there's not.
I really mean it! Do not ask, it's just annoying. It might only lead to us abandoning the work on the bug.
Oh check the "plans for the next build" section below as well.
But of course you're very welcome to post a decent fixing idea or development related note in'te the CM10.1 development discussion.
Hall of shame of people who ignored my warnings and still posted about already known bugs.
If someone continuously breaks this threads rules you'll land on my ignore list.
tonyp (damn!)
CM10.1 specific bugs:
Bluetooth is accellerating on many headsets fixed (by replacing the bdroid bt stack with bluez)
Wifi hotspot isn't working fixed (by forwardporting the CM10 internal hotspot handling to CM10.1)
SDCard write speed is subpar. not fixed
bugs affecting all CM10+ based ROMs (unordered list):
unable to reject calls on SU660 basebands fixed
low brightness after unlocking fixed
automatic time on SU660 and v30x basebands is broken fixed
wifi & 3g drain fixed (Kowalski Kernel)
notification lights aren't working fixed
zram is selected at 18% but isn't enabled fixed
init..rc contains some parameters interfering with the kernel configs fixed
bootanimation gets displayed "too long" fixed
CM10.1 Performance CPU settings aren't compatible with our Tegra CPU fixed
you can't bind the searchkey to actions like opening the recent app drawer fixed
FM radio isn't working fixed (see here)
In-Call muting fixed
Call forwarding fixed
autobrightness isn't working properly semi-fixed (kk120+ - kernel instead of ROM controlled, so you can't control it in the ROM, but via a sysfs)
Stock camera has some drawbacks (especially panorama & hdr) semi-fixed (by his or this ported LG Stock camera)
HDMI isn't usable not fixed
no signal after airplane mode bug (double press data or reboot to gain it back) not fixed
Changes and cherrypicks to the CM10.1 codebase:
Major Changes:
The codebase is CM10.1.0 RC4
fixed all the bugs above
incuded tiny non-neon gapps
Development settings enabled by default
Advanced reboot enabled by default
tonyp memory management added and enabled by default
(you can turn it off at Settings - Performance - Memory management)
purgeable assets enabled by default
enabled Pie Controls
Vibrations lowered (no, you can't change it back easily)
removed the autobrightness configuration options
(it's kernel controlled, you can't change it in the ROM!)
removed Videoeditor (and some LWPs)
added the awesome epic Kowalski kernel as prebuilt
(including KowalskiManager, alsa mixer and tx power stuff)
added a ****ing epic easteregg
Cherrypicks:
added more options to rebind the hardwarekey
added more options to the lockscreen longpress buttons
(including screen off! save the power power button some presses!)
option to pull down the Quick Settings panel when there are no new notifications
added a notification drawer brightness slider
option to disable the CRT animation
Center Clock option
Text-only batterystyle
Quickmemo framework support
Option to disable the lockscreen Camera widget
Custom carrier text
Recents RAM bar
much much more - read the changelogs linked at the end of the next post
Plans for future builds:
Bugs fixes:
-
Other:
GCC 4.7 experiments
CREDITS:
arcee and the CM team for all the work they did.
pengus77 for his awesome work at the kernel and new bootloader.
niko (Andrei E.) for his work on including the bluez stack into android.
marsgod for fixing the callbug on the old bootloader.
wkpark for the cracked ICS bootloader, the ramhack idea, and all is valid input.
goo.im, AndroidFileHost and vadonka for providing me great hosting services.
I got a bug - can I report it?:
If you want me to take the time to help and fix your bugs I expect you to take the time and do this properly!
Quick check: Did you do a full wipe before installing build 01? If not you need to do that first!
Check the known bugs section. If it's listed or mentioned there, drop it (and wait patiently if it'll get fixed eventually).
Use the search function and try to find if others have been posted about it.
You're only at the app and can't properly search within a thread?
Then wait until you're at home and report the bug from there!
Check the last 3 pages if the bug has been mentioned there.
You still with me? All of this takes too much of your precious time?
Then use another ROM!
Still nothing? Then report the bug in this thread.
Always attach logs to your bugreport!! Bug reports without logs will get ignored completely.
Study this for more details: [Reference] How to get useful logs
People who fail in doing this properly will get into the hall of shame.
Downloads:
ROM:
By downloading and/or using this ROM you agree to the guidlines of this thread:
Read and understand the entire OP!
Yes, it takes a couple minutes - but what's that compared to the 2+ month I put into the ROM??
Don't be a douchebag!
Follow the rules!
If you agree click the button and download the ROM :fingers-crossed:
Download: http://tonyp.basketbuild.com
Make sure to download the correct version for your bootloader!
Mirror: http://goo.im/devs/tonyp
Gapps:
This ROM already has tiny gapps included! That's a minimum gapps package (<20mb)
I put a lot of effort into integrating the required apps and libs and tested it carefully.
I choose this approach because of the many problems that the standard package causes to our non-neon Tegra2 phone.
Included are only the most basic (g)apps like Playstore, Talk (with working videochat), Calendar sync provicer etc.
If you want to remove the included gapps flash this package after flashing the ROM:
CM10.1-gapps-remover-tonyp.zip
For those of you who want the "full" gapps package including Google Now, TTS, Faceunlock, voice search etc. I worked on a full non-neon gapps package.
Get it from this thread: Non-neon Gapps (Android 4.2) dev-discussion thread
Do NOT flash any other gapps package - they aren't compatible with our phone!
If you accidently did that then format /system and reflash the ROM.
This is necessary to prevent bugs like like the keyboard closing while typing.
Addons:
You can download my officially supported addons from the addons folder:
http://goo.im/devs/tonyp/CM10.1-T-Builds/addons
This ROM has native support for Quickmemo.
For more details read this post.
I've build patches for OpenPdroid and PDroid2.0.
For more details read this post.
Kernel:
kowalski kernel thread
This ROM comes with the awesome kowalski kernel by pengus77.
For new versions (which come regularly) check out his thread!
Various:
TWRP recovery for both bootloaders
my modded adb drivers
Instructions:
Updating to a newer T-Build::
No wipes or system-format needed!
Choose the correct ROM for your bootloader
Flash the ROM
Flash the latest kowalski kernel
Tiny Gapps are included, so there's no need to flash gapps if those are enough for you.
If you want the full gapps package use the non-neon one I provide here.
If you want to remove gapps flash this package after flashing the ROM: CM10.1-gapps-remover-tonyp.zip
Reboot
Coming from another ROM:
If you're on the newbl either use pengus CWM 6.0.2.5 or my TWRP!
Other recoveries won't work.
oldbl users can use any CWM >5 or TWRP version.
Do a full wipe!
Just do the wipe, you will be thankful afterwards when everything does run better.
Format /system
Choose the correct ROM for your bootloader
Flash the ROM
Flash the latest kowalski kernel
Tiny Gapps are included, so there's no need to flash gapps if those are enough for you.
If you want the full gapps package use the non-neon one I provide here.
If you want to remove gapps flash this package after flashing the ROM: CM10.1-gapps-remover-tonyp.zip
Reboot
Don't restore system apps (like Settings) or system data (like Wifi data) with TitaniumBackup!
My personal recommended configuration:
Go to Settings - Performance - Processor and change the "Maximum CPU frequency" to 1200 (or even 1500) and "Set on Boot"
Open the KowalskiManager
enable the 3 power saving options at the top
lower TX Power to 11
Change the SD readaheads to 512
enable dynamic fsync
This ROM comes pre-configured with the following memory management changes:
zRAM enabled with 18%
tonyp memory management enabled
purgeable assets enabled
Changelog:
T-Build 01
T-Build 02
T-Build 03
T-Build 04
T-Build 05
Let me leave with a couple more notes:
This ROMs focus is stability! It's intention is to be a daily driver without the need to constantly flash new updates - that's why I kept you guys waiting that long and didn't release my daily testbuilds (more like 3 builds a day actually) which haven't been perfectly stable, yet.
That's why I took CM10.1 M3 as a base and don't merge in nightly features - everything in this ROM should be well tested and fully working.
I only picked memoryleak fix that's been discovered after M3.
I won't cherrypick each and every feature that's in some other ROM!
If there's a real useful addition that I personally like I will do it, but the fancy stuff has to go into other ROMs.
You guys know me - I am mostly patient and don't mind slight offtopic posts.
For completely offtopic posts you can use the CM 10.1 discussion thread.
... but I hate people who are lazy and don't do their own research. I spent countless hours on this ROM, I think I can expect you to spent a little time before asking questions.
I am not a vendor who's obligated to release a ROM for the phone - I am doing this in my free time for you and me.
So please - don't behave like a total noob. Or [email protected] and I will have a busy fishlapping time
F.A.Q. - Frequently Asked Questions:
How can I swap the mounting points for internal SD card and external SD card?
If you're on the new bootloader, flash this script via Recovery (thanks, @C0D3N1N3R!). For those on the old bootloader, you need this one instead (thanks, @SWTR!).
Which gapps package should I use with this ROM?
Seriously? You haven't been paying attention, have you? Go read the posts above this one!
Which PDroid version should I use?
It's a matter of personal preference, actually. Try both and see which one fits your needs the best. Keep in mind that if you're switching between Openpdroid and PDroid 2.0 (or viceversa) you need to uninstall the app and re-flash the ROM first, or else this kitten will die and it'll be in your conscience forever! I'm serious!!
Just flashed this ROM via recovery and can't get past the boot logo, what's wrong?
Chances are that you're using the wrong Recovery. Try pengus' CMW v6.0.2.5 and flash the ROM again. If the problem persists, check that the ROM zip file isn't corrupted (see each build's md5 hash on tonyp's goo.im CM10.1 folder). If none of that helps, then you better get Tony some logs
How can I know which bootloader my device is using?
An easy way to indentify this is by seeing the bootloader logo that appears when you turn on your device: white -> old bootloader, pink -> new bootloader.
How can I set a custom DPI on this ROM?
You can either use the Google Play DPI Fix Tool, or Tony's personal recommendation: Xposed in combination with Xposed App Settings (link down, use this one or this one instead for now) (see reference by @rugglez).
Viber doesn't work on this ROM, I can't even make a call. What can I do?
According to what we have read, recent versions of Viber won't work on CM 10+ for our device. Apparently, the developers of the app were been notified about the issue and they might look into it soon. Worry not, my friend, since not everything is lost. According to @engine24, Viber version 2.3.6.338 seems to be working alright. Make sure you uninstall your current version of Viber first before installing this one, though!
Battery drain is a bit too high, what's happening?
If you just flashed this ROM, please do one or two full battery charge cycles and see if it helps. Also, check on BetterBatteryStats for rogue apps keeping your device awake (and this is definitely worth a read!).
My screen goes bright before unlocking / after locking?
It's a known issue when using autobrightness. There's no fix for this at the moment.
My GPS takes ages to get a lock, how can I fix it?
Try the latest version available of the Google Specific No-SSL AGPS patch by @crypted. Unpack the gps.conf file and copy it into /system/etc/ using a root file explorer (set permissions to rw-r--r--). Optionally, you can add ro.ril.def.agps.mode = 1 to build.prop (find it in /system folder) but only if you're still having problems after applying the patch.
And, in case you're wondering, the answer is no: this patch won't be integrated into the ROM, so don't ask ... or will it?
Edit: that damn Tony added it to T-Build 3, so this is no longer necessary (unless he decides to drop it hehe)
Hardware Search key is not working!
Go to Settings > System > Hardware keys and make sure that Enable custom actions is checked. Also, change Search key action to In-app Search.
Spoiler post
Well the title says it all
Spoiler nr1. here is a screenshot of battery life with this rom and KK121...
Yeah im already curious...........tout de meilleur frère :laugh:
Waiting for upload to finish....merci
rmrajm1 said:
Yeah im already curious...........tout de meilleur frère :laugh:
Waiting for upload to finish....merci
Click to expand...
Click to collapse
Already finished, tony has great upload speed hehe
Loving the structure and text of the thread, though, same with the pictures
Sent from my LG-P990 using xda premium
Can:t w8!! Good job guys!!
Sent from my LG-P990 using xda premium
Oleeeeee
Gesendet von meinem LG-P990 mit Tapatalk 2
Thanks alot , well done .. will be testing it in moments
Congrats for the release tonyp. I've been with your test builds since I found them so I'm waiting eagerly to try this final build.
Thanks for the great work!
great job done.....I am thrilled to try a CM ROM....will report a feedback....
I am sure it will rock
CONGRATS and THANKS for the hard work.
Congrats downloading it
Sent from my LG-P990 using xda premium
This sounds great. Thank you for the sacrifices you've made a big investment in this old phone that can still be done to compete with the newer devices.:thumbup::beer:
Sent from my LG-P990 using Tapatalk 2
tonyp congratulations.
Thanks for your hard work
Sent from my LG-P990 using xda app-developers app
Yeah... downloading... :victory:
I found the easter egg.. :laugh::good:
Subscribed and ready for fishslapping... xD
Downloading and flashing too.
Thank you tonyp!
This Rom is based on and derived from SLIMRoms compiled from scratch, looking for maximum performance.
My goal is not only to compile. Is to modify and optimize, adding value.
All sources: https://github.com/Dhollmen
Product Highlights:
Android 4.4.4
Compilation with 4.8 toolchain.
Apps and framework generated with Java-7
Integrated last Dhollmen Kernel.
Interface to overclock kernel options.
Management just like FAT32 NTFS without requiring either apps or additional widgets.
Management EXFAT exactly like FAT32 , without requiring either apps or additional widgets.
Management of F2Fs partitions.
IR support (p5113).
Viper4Android AudioFX Effects.
Multiwindow.
PIE controls.
Multiple keys programmable navigation bar.
More ...
This Rom includes Viper4Android AudioFX as equalizer and audio effects controller, credits to ViPER520 and zhuhang.
The Viper4 Add-On includes the IRS-Starter-Pack and very nice presets by BSDgeek_Jake.
Download & installation: Post #2
Some comments about: Post #3
Changelog:
20150618
New interface.
Many modifications in apps.
Some fixes.
Includes last kernel release.
Improvements in system base.
20150118
New compilation from scratch.
Includes new kernel release.
Restored 512 MHz Gpu frecuency.
Changes in some blobs.
20150103
New look in the browser, in line with other base apps (contacts, messages, email)
Removes unneded Hal power module.
Reducing camera resources.
Minimal improvements in system base.
Base inline 20150103 - 9
20141214
New system wallpapers
Improved translations
Modifications in some apps.
Improvements in system base.
Base inline 20141214 - 8.20
20141107
Rework SlimLauncher
Many modifications in apps.
More Improvements in system base.
Base inline 20141106 - 8.10
20141028
Includes new SlimLauncher modified by me.
Removes old Trebuchet Launcher.
Restore the ability to slide fingers in keyboard.
Many modifications in apps.
More Improvements in system base.
Base inline 20141027 - 8.8
20141018
Includes previous camera fix.
Solves encrypted /data issue.
Changes to status bar.
Reduced logs and dropboxes files.
More Improvements.
Base inline 20141017 - 8.6.1
20141013
Solved Blobs & camera issues.
Solved battery icon when tablet in shutdown loading state.
Added SDcard NTFS and F2FS support-
Added SDcard larger than 32 GB (i.e. 64GB) support.
Some more Improvements.
Base inline 20141012 - 8.4.
20141009
Pre-release (please, read this post)
..
NOTE: I not own a 7-inch model, so I can't try it personally..
..
XDA:DevDB Information
Dhollmen, ROM for the Samsung Galaxy Tab 2
Contributors
tuxafgmur
ROM OS Version: 4.4.x KitKat
Based On: Slim Roms
Version Information
Status: Stable
Created 2014-07-27
Last Updated 2015-06-29
.
Install:
Ensure you have installed a kit-kat recovery.
Download the zip file for your model.
Download the Google Apps.
Download the Viper4Android IRS file.
Reboot into recovery mode.
Imperative to do "wipe data/factory reset" (first time only)
Install the Rom zip file.
Install the Gapps zip file.
Install the Viper4Android IRS zip file.
Updates:
Download the last zip file available.
Reboot into recovery mode.
Install the zip file without doing wipes.
Download:
Rom for GT-P3100 device
Rom for GT-P3110/3113 device
Google Apps (Gapps)
Viper4 Convolver IRS
Recovery TWRP Dhollmen
Keyboard Xperia-TNG
Flash Player Kit-Kat
Dock module activation . . . . . . . (if you own such dock, only)
.
WARRANTY: You agree that this product is provided "as is" without any warranty, either expressed or implied, on its operation.
DISCLAIMER: Your assumes at your SOLE RESPONSIBILITY & RISK all results produced by the "software" and/or instructions in this thread.
.
> Rom's Notes.
Who installs this Rom, accept it "as is".
Contains just the apps and options installed.
What you want to add will have to be obtained from Google-Play or any other sources.
Please, don't report bugs if you are not using the installed Dhollmen Kernel.
In case of questions or comments, you must indicate additional apps, tweaks or installed "optimizations".
if you insert images, do it in a 'hide' tag. This hide your image until an user click to show it.
I assume you has installed a suitable Recovery and know how to perform the required steps.
Keep in mind that Antutu and others related apps give you very similar values, regardless of the Rom used.
In such apps, OC influence on speed, but its goal is to evaluate the hardware, not the Rom.
Don't use any kind of overclock before three consecutive stability test in Antutu.
> Rom take a long time to boot after installing.
It is quite normal if ART runtime is used as applications are self-compiled at first boot time, after installing a new Rom or changing to ART.
> Applications are slow to start after installing.
It is quite normal if ART is used because apps have self-compiled before first use.
Although it may seem at times, the Rom is not hung, just have to wait.
> Get Root access.
In Settings app, entering development option and select Root access.
If you don't see these items, we activate:
Touch repeatedly on About tablet > build number. From now on, initial setting screen show that option, plus Performance.
> Get Performance access.
If you don't see these items, we activate:
Touch repeatedly on About tablet > build number. From now on, initial setting screen show that option, plus Development option.
> Google Apps (Gapps).
All Gapps packages available are virtually identical.
Only differ, from each other, in the amount of installed applications.
Two different packages must be never installed as likely to cause Google applications FC.
The Dhollmen Gapps, being valid for any Rom, are specifically adapted for installation on it.
> Viper4 - Convolver - IRS.
This application controls the System Sound FX.
It also includes a number of advanced pre-equalizer settings (made by others) that are the IRS whose installation files requested.
Access to Convolver (manager of the IRS) is obtained by selecting the option Expert in Experience Settings.
Using another equalizer (provided by external applications) usually interfere with it.
You can only have one active equalizer in the system, but if you want to use another one, kindly Viper4 can be turned off.
> Restoring backups.
It is very common Titanium Backup (or similar) problems in Rom.
If backup /data partition are made and, after a change of Rom, restored, usually side effects will occur.
In this directory and subdirectories it contains, there are many configuration files and internal databases.
When it comes to a specific application should not be a problem as long as it is not part of the Rom.
When sub-directories containing settings are restored, the likelihood of problems increases exponentially.
For example, all Roms have a Settings application, but the content of his configurations differs between them and is not interchangeable.
Under no circumstances you should restore /system partition apps.
Rom Added to Index Thread
welcome aboard dude:good:
haven't heard from you for a while
edit:
Great n stable build, my quick test didn't find any issue, kudos :good: @tuxafgmur how did you make screenshot working, coz it didn't even work in AOKP rom by @Chirag_Galani?
I was able to test this great rom before you all
thanks @tuxafgmur for 20131215 Build and letting me test it
I really love it!
Great work! Keep it up! Nice to see that everybody now can use this Rom
Downloading 22th Rom now
What i forgot:
I really like the Sound and the MusicPlayer is great!
And it´s a much Stable Rom
Installed this last night - running nice and smooth. Thanks for a great release
PS - IR working well on P 3113
Regards,
sent from my GT-P3113 using Tapatalk HD
Hot Release <3
So far seems to be a Kickass Rom till used so far. :victory:
[Edit: I will report bugs if founds]
Thanks for this :laugh:
Thanks for rom!
NO OPTION in RECENTS RAM BAR
Other than that great rom
Hey @tuxafgmur,
How did you fix the screenshot bug and the small rotated recent apps??
I need those for my ROM.
Thanking you.
Regards,
Chirag.
Chirag_Galani said:
Hey @tuxafgmur,
How did you fix the screenshot bug and the small rotated recent apps??
I need those for my ROM.
Thanking you.
Regards,
Chirag.
Click to expand...
Click to collapse
I do not want to look like I refuse to answer it, but now I'm not focused on as I solved each of the bugs I found.
Note that I have made several thousand code modifications by adding, modifying or deleting lines.
I started my work on past July, then I abandoned her to get involved in Carbon and then restarted in past October.
When I got the initial repo version this included numerous previous changes.
If your bearings me a little about these problems, I can try to locate code sections related and, perhaps then, will serve you as an aid.
Regards.
tuxafgmur said:
I do not want to look like I refuse to answer it, but now I'm not focused on as I solved each of the bugs I found.
Note that I have made several thousand code modifications by adding, modifying or deleting lines.
I started my work on past July, then I abandoned her to get involved in Carbon and then restarted in past October.
When I got the initial repo version this included numerous previous changes.
If your bearings me a little about these problems, I can try to locate code sections related and, perhaps then, will serve you as an aid.
Regards.
Click to expand...
Click to collapse
Hey,
Ok so wanna continue in PM?? Or Google Hangouts???
As the bugs i face are very complex for me to debug having tried to debug since so many days....
Thanking you.
Regards,
Chirag
Sent from my GT-I9070 using Tapatalk
com.google.process.gapps
giving FC... tried everything
help required
Sent from my GT-P3100 using Tapatalk
Chirag_Galani said:
Hey,
Ok so wanna continue in PM?? Or Google Hangouts???
As the bugs i face are very complex for me to debug having tried to debug since so many days....
Thanking you.
Regards,
Chirag
Click to expand...
Click to collapse
Well. I'm wait your P.M.
tuxafgmur said:
Well. I'm wait your P.M.
Click to expand...
Click to collapse
Sent
Can someone else with a 3113 or 3110 running this ROM test their mic to see if its working properly?
I went to use Google now an noticed it could not hear me. Then went to sound recorder, same results. Just to be sure, I opened pitchlab, an app I use to tune my guitar and a few other instruments and still no response from mic. Didn't see it in "known bugs" in the thread so that's why I'm asking. I did compare the libs and modules for mic from a previous nandroid of aokp that i know the mic worked just to make sure it was all there. All is there, like it should be..
Ill pastebin a logcat if noone else reports this but I figured I'd ask first.
For reference I installed it clean like so:
Did a full format of
/system
/cache
/data
/sdcard
Then installed the latest ROM.zip and gapps from first post. Everything else in the ROM works beautifull. Fast and smooth. Using for about three days as a daily driver before I noticed the mic problem. Didn't experience any other bugs and I have been through every setting in customization available to get it setup how I like.
P.S. using built-in kernel. And no Xposed or modules
Edit: Fixed.. updated my recovery and re-flashed a clean flash. Rom works quite nice. Fast and smooth. Ill report bugs if I find any.
Stable , fast and good battery life. Tablet UI interface it's wonderful! I test mic later
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
sent from p3100
What is wrong with this ROM? Few times during the day a self restart. You can not watch the movies 720p.