Stuck on samsung logo for Gnote - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

hey guys,
a buddy of mine updated his gnote to the new lrq firmware, he rooted, it was working and he had hydra core standard kernal running on it, he
decided to run the cleanote 13.4 OC on it via mobile odin, when he flashed it it suddenly rebooted and is now stuck on the samsung logo, the reboot into recovery code commands will no longer work as well........help us out guys he didnt do a factory reset so is there anything that can be done???
thanks

mafioso345 said:
hey guys,
a buddy of mine updated his gnote to the new lrq firmware, he rooted, it was working and he had hydra core standard kernal running on it, he
decided to run the cleanote 13.4 OC on it via mobile odin, when he flashed it it suddenly rebooted and is now stuck on the samsung logo, the reboot into recovery code commands will no longer work as well........help us out guys he didnt do a factory reset so is there anything that can be done???
thanks
Click to expand...
Click to collapse
tell him to flash new stock rom using odin.

thehackersz said:
tell him to flash new stock rom using odin.
Click to expand...
Click to collapse
thanks will try and revert back.....

Step 1: Download appropriate stock ROM on your PC/Laptop and Unzip it.
Step 2: Download PC Odin3-v3.04
Step 3: Stop all firewall/antivirus programs runninig in your PC, and then run ODIN.
Step4: Start your gNote in DOWNLOADER mode (by pressing Vol. Down+Home+Powerkey)
Step 5: Connect your gNote (in downloader mode) to your PC/Laptop
Step 6: Select appropriate (PDA) file in the unzipped stock ROM and click START in Odin
After few minutes.... when your gNote restarts, you are done. Enjoy...
(u may get the detailed guide and download links from http://forum.xda-developers.com/showthread.php?t=1424997 (thanks dr.ketan!!)

Ravindra9 said:
Step 1: Download appropriate stock ROM on your PC/Laptop and Unzip it.
Step 2: Download PC Odin3-v3.04
Step 3: Stop all firewall/antivirus programs runninig in your PC, and then run ODIN.
Step4: Start your gNote in DOWNLOADER mode (by pressing Vol. Down+Home+Powerkey)
Step 5: Connect your gNote (in downloader mode) to your PC/Laptop
Step 6: Select appropriate (PDA) file in the unzipped stock ROM and click START in Odin
After few minutes.... when your gNote restarts, you are done. Enjoy...
(u may get the detailed guide and download links from http://forum.xda-developers.com/showthread.php?t=1424997 (thanks dr.ketan!!)
Click to expand...
Click to collapse
Also connect to rear (mobo) usb ports not front extensions for stable connection.
Sent from my GT-N7000 using xda app-developers app

thanks all he installed the stock lrq and was successful....

Related

How to go from stock gb to German ics stock ?

As the title says
Not bothered about root either as the tutorial I found seems to think we all want root !
Just download the ICS file and flash via Odin.
1. Unrar ICS file.
2: Power off the phone.
3: Press and hold Power+Home+Vol Down to enter download mode.
4: Open ODIN and under PDA, load the tar/md5 file which you just downloaded.
5: Under ID:COM, wait for the device to be detected. You will see a yellow color with some port number inside it.
6: Hit Start and wait for ODIN to flash the new ICS firmware on your Galaxy Note.
Thanks
Sent from my GT-N7000 using XDA

[Q] How to install official ICS without root

Stock, ICS Update new to Samsung devices. I own a Note for 10 days. It is on 2.3.6 XILB1 which I found out to be Italian Global. It is not rooted.
I would like to upgrade to ICS but when I searched the forum the are many threads with download links and I am confused wichone to download(wipe or non wipw???)
In a thread I've found
Just download the ICS file and flash via Odin.
1. Unrar ICS file.
2: Power off the phone.
3: Press and hold Power+Home+Vol Down to enter download mode.
4: Open ODIN and under PDA, load the tar/md5 file which you just downloaded.
5: Under ID:COM, wait for the device to be detected. You will see a yellow color with some port number inside it.
6: Hit Start and wait for ODIN to flash the new ICS firmware on your Galaxy Note.
As far as I understand I need PC Odin to flash but will it harm my device to flash a Germany Rom to Italian device. With HTC I had to change the CID according to ROM or Super CID the phone.
I prefer a clean install and setup so I don't mind loosing all my data and install all my apps back. Also I am mot planning to root my Note for now since I've only used root change boot animation and install Quick Boot and I can live without them.
A link to direct me to the correct file would be very appreciated.
thanks and best regards...
Lowyat forum
DarthLuca said:
Stock, ICS Update new to Samsung devices. I own a Note for 10 days. It is on 2.3.6 XILB1 which I found out to be Italian Global. It is not rooted.
I would like to upgrade to ICS but when I searched the forum the are many threads with download links and I am confused wichone to download(wipe or non wipw???)
In a thread I've found
Just download the ICS file and flash via Odin.
1. Unrar ICS file.
2: Power off the phone.
3: Press and hold Power+Home+Vol Down to enter download mode.
4: Open ODIN and under PDA, load the tar/md5 file which you just downloaded.
5: Under ID:COM, wait for the device to be detected. You will see a yellow color with some port number inside it.
6: Hit Start and wait for ODIN to flash the new ICS firmware on your Galaxy Note.
As far as I understand I need PC Odin to flash but will it harm my device to flash a Germany Rom to Italian device. With HTC I had to change the CID according to ROM or Super CID the phone.
I prefer a clean install and setup so I don't mind loosing all my data and install all my apps back. Also I am mot planning to root my Note for now since I've only used root change boot animation and install Quick Boot and I can live without them.
A link to direct me to the correct file would be very appreciated.
thanks and best regards...
Click to expand...
Click to collapse
You may want to refer to this forum http://forum.lowyat.net/topic/2337733
lots of guide
- Download the ROM from here
- Open PC Odin
- Go into Download mode on your Note
- Extract the zip and flash the md5 file
Voila.
the md5 file goes in the pda slot of pc odin, if your not familiar with it and make sure you have the samsung drivers installed, easy way is to install kies and plug your phone in and wait for it to connect once to ensure you have the proper drivers
I keep getting stuck on zimage. Uninstalled kies and left the drivers, so its not that. Any ideas. Never had issues flashing my epic with odin.

[Q] Lots Of Questions

Hello XDA Community,
I am an 2 year XDA veteran, so i am properly familiar with all things related to XDA.
I currently own a Xperia X10 Mini Pro and a Xperia Mini Pro....
I tinker a lot with these 2 phones. SE phones mainly need fastboot.....
I just brought a Samsung Galaxy Note(SGN) N7000 (India) a few days back and am really excited to run CM9 on it.....
But i have alot of unanswered questions.....
So i just need the community's help...
1. Does the SGN have a stock recovery....????
My cousin has a Galaxy Tab 8.9 and it had a stock recovery. I just flashed a zip to root it and another zip for CWM......
2. What exactly is ODIN....?????
The Tab 8.9 had ODIN with a Recovery but our SGN does not seem to have one.......
3. Is it safe to upgrade to official Samsung ICS......????
There is alot of talk going on in the forum about HARD BRICKING our SGN if we upgrade........
4. What do i exactly have to do to get CWM......????
The guides in Development Section by dr.ketan have me totally confused, though i have rooted my SGN using DoomLord's Kit............
I am new to Samsung devices ant dont know the way they work.....
So any help will be extremely appreciated.......
Thanks.
1 there is a stock rom you can flash it with odin
2 odin allow you to flash your sgn
3 no it is safe
4 you can download it and flash it with odin
If you want a link for your odin or for a rom just post.
Sent from my I9300 using XDA Premium
lhamza said:
1 there is a stock rom you can flash it with odin
2 odin allow you to flash your sgn
3 no it is safe
4 you can download it and flash it with odin
If you want a link for your odin or for a rom just post.
Sent from my I9300 using XDA Premium
Click to expand...
Click to collapse
I used Vol down + home + power while starting up, and the phone booted into ODIN but there is no recovery.....
The screen only shows " Start Downloading"...
What is this........???/
Whereas the ODIN in Tab 8.9 gave options to flash .zips and much more......
Help please......
Thats download mode, you use with odin from your PC.... use Vol up + home + power for recovery
Download mode is mostly used to flash stock roms (afaik) and they can be found http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-N7000&r=-1#modelsa
amey2606 said:
I used Vol down + home + power while starting up, and the phone booted into ODIN but there is no recovery.....
The screen only shows " Start Downloading"...
What is this........???/
Whereas the ODIN in Tab 8.9 gave options to flash .zips and much more......
Help please......
Click to expand...
Click to collapse
You are talking about download mod just download your rom and put it on odin and start downloading
Sent from my I9300 using XDA Premium
Xalies said:
Thats download mode, you use with odin from your PC.... use Vol up + home + power for recovery
Download mode is mostly used to flash stock roms (afaik) and they can be found http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-N7000&r=-1#modelsa
Click to expand...
Click to collapse
I am on 2.3.6 and i used vol up + home + power and i successfuly entered recovery.......
Thanks...
I just had another question, is there any .zip file that can be flashed to install CWM, meaning a CWM .zip file...............??????????
Thanks very much.
And i also tried updating to official ICS through KIES on PC but the download is very slow (my d/l speed is 1mbps) and it times out at 45-50 %........
Any idea..... ????/
amey2606 said:
I am on 2.3.6 and i used vol up + home + power and i successfuly entered recovery.......
Thanks...
I just had another question, is there any .zip file that can be flashed to install CWM, meaning a CWM .zip file...............??????????
Thanks very much.
And i also tried updating to official ICS through KIES on PC but the download is very slow (my d/l speed is 1mbps) and it times out at 45-50 %........
Any idea..... ????/
Click to expand...
Click to collapse
Yes there is cwm.zip just download rom manager from market and search for install clock world mod recovery.
About the kies problem just use odin not kies.
You can upgrade with odin in 3 min
Sent from my I9300 using XDA Premium
lhamza said:
Yes there is cwm.zip just download rom manager from market and search for install clock world mod recovery.
About the kies problem just use odin not kies.
You can upgrade with odin in 3 min
Sent from my I9300 using XDA Premium
Click to expand...
Click to collapse
Thanks for your reply....
Can you please tell me the exact procedure on how to update from ODIN PC......????
amey2606 said:
Thanks for your reply....
Can you please tell me the exact procedure on how to update from ODIN PC......????
Click to expand...
Click to collapse
ok. first tell me what rom do you want.
and from what country?
lhamza said:
ok. first tell me what rom do you want.
and from what country?
Click to expand...
Click to collapse
I installed ROM Manager from market but there is no recovery for SGN N7000......
I am from India (INU)
I wanted to update to the official Samsung ICS ROM........
ok download rom from here http://www.hotfile.com/dl/156601210/d18d7d5/N7000DDLP8_N7000ODDLP5_INU.zip.html
and odin from attachement
extract the odin file and open it .then choose the pit file .
after the rom finish downloading .
extract it and you well get N7000DDLP8_N7000ODDLP5_HOME.tar.md5
go to odin and click pda then choose the extracted file
then connect your phone in download mode odin will detected (yellow collor )
then press start and wait until odin is finished you can know that with pass
thanks if i helped you
lhamza said:
ok download rom from here http://www.hotfile.com/dl/156601210/d18d7d5/N7000DDLP8_N7000ODDLP5_INU.zip.html
and odin from attachement
extract the odin file and open it .then choose the pit file .
after the rom finish downloading .
extract it and you well get N7000DDLP8_N7000ODDLP5_HOME.tar.md5
go to odin and click pda then choose the extracted file
then connect your phone in download mode odin will detected (yellow collor )
then press start and wait until odin is finished you can know that with pass
thanks if i helped you
Click to expand...
Click to collapse
Thanks but what if i want to install CM9....
they say we need to be on GB to install CM9 and need CWM....
How do i install CWM.........????????
Its not availacle on ROM Manager.....
I tried thishttp://forum.xda-developers.com/showpost.php?p=26455511&postcount=2475 CWM.zip file but i get
" failed to verify whole-file signature".......
Any help on this.....?????
amey2606 said:
Thanks but what if i want to install CM9....
they say we need to be on GB to install CM9 and need CWM....
How do i install CWM.........????????
Its not availacle on ROM Manager.....
I tried thishttp://forum.xda-developers.com/showpost.php?p=26455511&postcount=2475 CWM.zip file but i get
" failed to verify whole-file signature".......
Any help on this.....?????
Click to expand...
Click to collapse
you can install it with odin mobile
http://turbobit.net/download/free/wcsc1f8j8p8c
here is the cwm link http://download.chainfire.eu/163/CF-Root/SGN/CF-Root-SGN_XX_OXA_LPY-v5.3-CWM5.zip?retrieve_file=1
Extract the downloaded file and copy it to your device. Launch Mobile Odin, tap “Open File” and select “tass-recovrery-cwm.tar"
lhamza said:
you can install it with odin
download it from attachement
the same thing choose pda then choose cwm and start
or flash it with odin mobile http://turbobit.net/download/free/wcsc1f8j8p8c
Extract the downloaded file and copy it to your device. Launch Mobile Odin, tap “Open File” and select “tass-recovrery-cwm.tar"
Click to expand...
Click to collapse
This is using ODIN, but how can i install CWM using stock recovery......?????
amey2606 said:
This is using ODIN, but how can i install CWM using stock recovery......?????
Click to expand...
Click to collapse
i change the last post check it
lhamza said:
i change the last post check it
Click to expand...
Click to collapse
ok thanks but i think i am still confused, a lot.....
odin is terrifying me (dont want to brick my note).......
i will try it later.....
XPERIA phones were not so complicated.
thanks for all your help though...... ;-)
you re welcome
Just one thing odin does not brick any device .
I use odin every week. And i never bricked my device.
Just do what i told you and your device will be fine.trust me
Sent from my S9300 using xda premium
lhamza said:
you re welcome
Just one thing odin does not brick any device .
I use odin every week. And i never bricked my device.
Just do what i told you and your device will be fine.trust me
Sent from my S9300 using xda premium
Click to expand...
Click to collapse
I was under the impression that we could install CWM by just flashing a CWM.zip file through Stock Recovery..........................
Moved To Q&A​
Please post all questions in the Q&A section​
amey2606 said:
I was under the impression that we could install CWM by just flashing a CWM.zip file through Stock Recovery..........................
Click to expand...
Click to collapse
Yes you can do that. Just search for it and you will find it
sent from my S9300 using XDA Premium

Is my phone bricked?

I recently upgraded my phone to g-note from s2, it came with gingerbread 2.3.6 out of the box and i couldn't wait to flash it with ICS.
I first tried rooting it first with that runme command prompt tool... but that wasn't successful at all, so i then tried to to flash it with
AbyssNotekernel42CWTouchOriginalLogo_2. After reboot my phone got stuck on the boot logo with a yellow triangle. I can still get
my phone into download mode. Problem is my phone has now got 3 counts of binary, can i still flash an official stock rom? What
can i do to fix this? Thanks in advance.
itswill7 said:
I recently upgraded my phone to g-note from s2, it came with gingerbread 2.3.6 out of the box and i couldn't wait to flash it with ICS.
I first tried rooting it first with that runme command prompt tool... but that wasn't successful at all, so i then tried to to flash it with
AbyssNotekernel42CWTouchOriginalLogo_2. After reboot my phone got stuck on the boot logo with a yellow triangle. I can still get
my phone into download mode. Problem is my phone has now got 3 counts of binary, can i still flash an official stock rom? What
can i do to fix this? Thanks in advance.
Click to expand...
Click to collapse
Calm down.
Before im proceed to gv u more info. Please NEVER do any factory reset and nandroid restore on unsafe kernel.
Sent from my GT-N7000 using xda premium
---------- Post added at 09:01 AM ---------- Previous post was at 08:52 AM ----------
itswill7 said:
I recently upgraded my phone to g-note from s2, it came with gingerbread 2.3.6 out of the box and i couldn't wait to flash it with ICS.
I first tried rooting it first with that runme command prompt tool... but that wasn't successful at all, so i then tried to to flash it with
AbyssNotekernel42CWTouchOriginalLogo_2. After reboot my phone got stuck on the boot logo with a yellow triangle. I can still get
my phone into download mode. Problem is my phone has now got 3 counts of binary, can i still flash an official stock rom? What
can i do to fix this? Thanks in advance.
Click to expand...
Click to collapse
Ok. Dont worry about the binary count and yellow triangle.
Your status consider safe and nothing to worry. As l can see u are from s2, therefore i think u will quite well understanding in terms of using pc odin.
It have a lot of method to flash stock or custom rom. Rather thru pc odin / mobile odin and recovery for custom rom in zip file.
1). Download any desire stock ics rom at sammobile.
2.) Unzip the rom file which u download from sammobile.
3. Open pc odin.
4). Boot ur phone into download mode. Connect usb cable to ur phone and pc.
5). Once connected and yellow colour comm appeared. Press pda button and choose the right file.( tar file about 850mb++).
6. Reminder: Do not tick any box other than what im mentioned here.
7). Press start ...you are done.
Sent from my GT-N7000 using xda premium
1.) Kick yourself.
2.)Read the instructions thrice before doing anything.
Now for the real stuff-
3.)Download any stock GB ROM.Stock Roms
4.)Wipe Data
5.)Root it by following the same thread.
6.)Install any ICS ROM.Follow the instrutions to the letter.Then use TriangleAway.apk to clear binary count.(Search the forum for the apk)
7.)You're done.
8.)If you have problems search for a solution.If you don't find it, ask.
Always happy to help
For simple rooting.
1). Download speed-mod k3-13 kerner ( odin version).
2). Flash it thru pc odin.
3). Wait phone reboot and settle down. Download triangle away and reset the binary count follow instruction given. Done.
Good luck mate.
Sent from my GT-N7000 using xda premium
thatks
thatks a lot guys, i apriciate.
lee yun khong said:
For simple rooting.
1). Download speed-mod k3-13 kerner ( odin version).
2). Flash it thru pc odin.
3). Wait phone reboot and settle down. Download triangle away and reset the binary count follow instruction given. Done.
Good luck mate.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Hey bro, he was/is on a GB ROM 2.3.x . How is installing an ICS Kernel(SpeedMod k3-13) going to help ?
itswill7 said:
I recently upgraded my phone to g-note from s2, it came with gingerbread 2.3.6 out of the box and i couldn't wait to flash it with ICS.
I first tried rooting it first with that runme command prompt tool... but that wasn't successful at all, so i then tried to to flash it with
AbyssNotekernel42CWTouchOriginalLogo_2. After reboot my phone got stuck on the boot logo with a yellow triangle. I can still get
my phone into download mode. Problem is my phone has now got 3 counts of binary, can i still flash an official stock rom? What
can i do to fix this? Thanks in advance.
Click to expand...
Click to collapse
Ur step is wrong buddy..
If want going to ics..
Just flashing ics using pc odin...
N rooting using pc odin with custom kernel..
Sent from my GT-N7000 using Tapatalk 2
Kernel
So can i just flash a GB stock kernel to fix it? i dont have a stable internet connection to download an offical ROM till tomorrow.
Do u still using abyss kernel?
If yes try using other kernel..
Stock kernel is good choise

[Q] Updated ROM Philz JB 4.1.2 XXLT6 via Odin but won't go past samsung gt-n7000

Hope you guys can help me.
Was updating my ICS (Criskelorom) to JB 4.1.2 XXLT6 ROM of Philz (PhilZ-cwm6-XXLT6-XSA-5.06.1.tar.md5) via Odin 3.07. Initially had some issues but, managed to get to where Odin resulted in a PASS. On REBOOT I only get up to the Samsung Galaxy GT-N7000 screen with a yellow ! triangle at the bottom. I was able to get to both Recovery and Download modes but would never get passed to homescreen and just stay on black screen.
Did it several times and got worried I'd brick my phone so I ran the ICS zip I had stored on my SD via Recovery mode and was able to get my phone running. Still want to pursue my JB upgrade though but, not sure if I was doing it right. Any help would be much appreciated guys.
Here is what I did...
MADE SURE OF THE FF.:
1) Install USB driver for Samsung Galaxy Note to transfer files between the phone and the computer using download of KIES from Samsung site
2) Enable USB Debugging Mode on the phone to connect the Android device with the computer
3) created a back-up of my contacts only
4) charged to above 80% battery charge
5) The phone should be factory unlocked and not locked to any particular carrier - I had unlocked it during my ICS upgrade from the GB original OS
THEN FOLLOWED THE STEPS:
Step-1: Download PhilZ-cwm6-XXLT6-XSA-5.06.1.tar.md5 for Samsung Galaxy Note to the computer
Step-2: Download Odin 3.07 which will help to install the root package on the phone. Extract the Odin zip to get Odin3 v3.07.exe file with some other files
Step-3: Place the Galaxy Note into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot appears on the phone's screen. Now press the Volume Up button to continue to enter into Download Mode
Step-4: Run Odin3 v3.07.exe as an Administrator
Step-5: Connect the Note to the computer using USB cable while it is in the Download Mode. Wait for some time until Odin detects the phone. When the device is connected successfully, the ID: COM box in Odin will turn yellow with the COM port number. Also, the successful connection will be indicated by a message saying Added in Odin.
Note: If the Added message does not come then try another US port, try the one located at the back side of the computer. If Odin still fails to detect the device then re-install USB driver
Step-6: In Odin, click the PDA button and select the PhilZ-cwm6-XXLT6-XSA-5.06.1.tar.md5 file
Step-7: Now configure the Odin settings. Ensure that the Auto Reboot and F.Reset Time checkboxes are selected in Odin. As for the Re-Partition, uncheck the option
Step-8: Once everything is set, click the Start button in Odin. The installation should begin now and would take about few minutes to complete
Step-9: When the installation process is completed the phone will restart automatically. And soon a PASS message with green background will appear in the Odin indicating successful installation. After the home screen appears on the phone, unplug the USB cable from the device to disconnect it from the computer
Was able to reach Step-9 but my phone would not get to home screen.
Please help me with any advise anyone can give me?
thanks.
By the way, saw another option for Steps 5-6:
Step-5: Connect your Note N7000 with your PC using a data cable. Once the device is successfully connected, you will see a notification in Odin in the bottom left saying Added!! - if for some reason, you do not see the said notification, try another USB port. Also, check for ID:COM port being depicted by a number in yellow to make sure that you have successfully added your device.
Select the following files in Odin at their respective tabs from extracted XXLT6 firmware folder:
Step-6:
Click the PDA button to select the .tar file extracted earlier.
Click the Phone button, and select file with *modem* in its name (ignore, if this file does not file exist).
Next, click the CSC button, and select file with *csc* in its name (ignore, if this file does not file exist).
Click the PIT button to select the .pit file. (ignore, if this file does not file exist).
Ensure that Auto Reboot and F. Reset Time are the only options selected in Odin window. Also ensure to select Re-Partition checkbox only if you are using a .pit file.
Except since I only had the TAR file I ignored the rest so I assumed I was doing it right up to that point. Also, the YELLOW highlight in Odin 3.07, wasn't yellow but kind of light blue.
That was it. All I did. Still, not succesful.
Please help.
Thanks.
Phew! That's a lot to read.. The file you are trying to flash is just a kernel not a whole rom. That's why your phone after the flash has a JB kernel and ICS rom. That's why the phone does not boot. To upgrade to JB, download a stock rom from sammobile.com and flash it using Odin the same way just in PDA of Odin.
nokiamodeln91 said:
Phew! That's a lot to read.. The file you are trying to flash is just a kernel not a whole rom. That's why your phone after the flash has a JB kernel and ICS rom. That's why the phone does not boot. To upgrade to JB, download a stock rom from sammobile.com and flash it using Odin the same way just in PDA of Odin.
Click to expand...
Click to collapse
Sorry about the read. =)
Was thinking I'd rather be complete than have anyone helping need to ask more clarifications to help me. =D
Oh that's why. Thanks for the reply. I will do that.
So I need to get the WHOLE ROM from the site you mentioned. A ROM that is complete, Kernel and all. Actually I thought I did get a complete ROM. Did not realize it was just a Kernel. What would be the best way to determine if a ROM is complete? What is usually the size of the file itself? The one I downloaded was like 8MB so I thought that was pretty big. Kinda looked for awhile for that XXLT6 original JB ROM so didn't stop to think if it was just a Kernel. My bad.
By the way, are the ROMs on Sammobile rooted? Or do I need to root them?
thanks again!
izmoothski said:
Sorry about the read. =)
Was thinking I'd rather be complete than have anyone helping need to ask more clarifications to help me. =D
Oh that's why. Thanks for the reply. I will do that.
So I need to get the WHOLE ROM from the site you mentioned. A ROM that is complete, Kernel and all. Actually I thought I did get a complete ROM. Did not realize it was just a Kernel. What would be the best way to determine if a ROM is complete? What is usually the size of the file itself? The one I downloaded was like 8MB so I thought that was pretty big. Kinda looked for awhile for that XXLT6 original JB ROM so didn't stop to think if it was just a Kernel. My bad.
By the way, are the ROMs on Sammobile rooted? Or do I need to root them?
thanks again!
Click to expand...
Click to collapse
They are just stock roms, to root again use the philz kernel but for jb this time. Also use the .zip this time instead of tar file, you can flash the zip file from stock recovery itself. You can raed more in philz kernel thread
Sent from my GT-N7000 using Tapatalk
treacherous_hawk said:
They are just stock roms, to root again use the philz kernel but for jb this time. Also use the .zip this time instead of tar file, you can flash the zip file from stock recovery itself. You can raed more in philz kernel thread
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
Got it, thank you Sirs you've all been a very big help. I ran into some issues with TW right after completing the install of 4.1.2. Every darn thing was stopping even acore and TW. Was about to chicken out and go back to my safety ICS ROM when I got to read some stuff about needing to Clear/Reset on Recovery mode after any firmware flashing as well as Clearing the Cache so I did. And voila, it worked. I think I'll rest my worrying brain for now on the root. =P
I'll root it next week. I'll just have fun with it for now. Been up playing around with this for over 24hours now. Having too much fun but already drained.
Thank you again for you help!
same situation here...!!!
hello XDA ppl...
I had ICS 4.0.4 and attempted to use PhilZ-cwm6-XXLTA-ATL-5.15.0.tar.md5.
That took me to the same situation I think... kernel for JB and ICS ROM...
I power on my phone and it gets to a GT-N7000 Note + Yellow Triangle screen and NO MORE!
I can get to PhilZ Recovery Mode or ODIN Download Mode.
That´s all...
I will attempt right now what you told the creator of this thread and update if it helped.
any help is welcome...
FIXED!!!
AWESOME!!!
My bot is back again!!!
Thanks a lot guys...
This thread worked as a charm. :victory:
1. Odin 3.0.X
2. Factory Firmware
3. Flash it as PDA.
4. No yellow triangle.
5. Removed battery and waited 5 seconds.
6. recovery mode.
7. clear data/factory reset.
Done!
---------- Post added at 03:33 AM ---------- Previous post was at 03:28 AM ----------
juliowong said:
AWESOME!!!
My bot is back again!!!
Thanks a lot guys...
This thread worked as a charm. :victory:
1. Odin 3.0.X
2. Factory Firmware
3. Flash it as PDA.
4. No yellow triangle.
5. Removed battery and waited 5 seconds.
6. recovery mode.
7. clear data/factory reset.
Done!
Click to expand...
Click to collapse
Well... finally I am back to ICS.
Now gotta find a safe way to get it to JB.
juliowong said:
Now gotta find a safe way to get it to JB.
Click to expand...
Click to collapse
Safest way to get to JB with wipe (that is formatting) is to get philz kernel for ICS and then reboot to recovery do factory reset and wipe /system /data /internal storage /cache and then reboot to download mode and flash JB from odin. Else if you dont want to loose data, just boot into download mode and flash JB using odin.
juliowong said:
6. recovery mode.
7. clear data/factory reset.
Well... finally I am back to ICS.
Now gotta find a safe way to get it to JB.
Click to expand...
Click to collapse
Yeah!! May be you want to start by not wiping on a stock ICS kernel.

Categories

Resources