Could some one for benefit of Indian Tab Owners, write a step-by-step instructions or guide. Lot of information to digest for a new user including details of 1) rooting 2) installing recovery 3) flashing ... this information would be great useful for everyone.
My Tab details :
(Model: GT-P1000 | Code: INU | Version: P1000DDJK3/P1000ODDJJ1/P1000DDJJ1)
hey..even i have a galaxy tab indian version...just follow the guides that are avaliable here for rooting flashing etc...etc...and i had the same modem when i bought it but its since been upgraded to a newer version of the modem so i just updated the modem to the ...DXJM2 version..thought the asian modem would be better for me..if u want i'll post the modem.bin
Dare{D}evil said:
hey..even i have a galaxy tab indian version...just follow the guides that are avaliable here for rooting flashing etc...etc...and i had the same modem when i bought it but its since been upgraded to a newer version of the modem so i just updated the modem to the ...DXJM2 version..thought the asian modem would be better for me..if u want i'll post the modem.bin
Click to expand...
Click to collapse
Thank you for quick reply. I started compiling the files need to flashing. So far, I could do following. Please advice me whether I am on the right path or not.
1. Rooted my tab with Z4root. Now I got root permission.
2. Downloaded Odin3 v1.7.exe and s1_odin_20100803.pit for flashing
3. Downloaded Roto-JMI-Full-v2.zip and Roto-JMI-Upgrade-v2.zip
Now, using Odin PDA button, I want to flash Roto-JMI-Full-v2.zip ?
Few questions:
a) Is this correct way of flashing or I am missing something?
b) Does above flash install Recovery also ?
c) which files need for PHONE and CSC files ?
d) Which firmware best suitable for Indian Tab ?
Thank you in advance for clarifying above.
I really appreciated reply for my questions as it would allow me to move forward. I will ensure a good documentation at the end of the process for benefit of other users.
nchary05 said:
Thank you for quick reply. I started compiling the files need to flashing. So far, I could do following. Please advice me whether I am on the right path or not.
1. Rooted my tab with Z4root. Now I got root permission.
2. Downloaded Odin3 v1.7.exe and s1_odin_20100803.pit for flashing
3. Downloaded Roto-JMI-Full-v2.zip and Roto-JMI-Upgrade-v2.zip
Now, using Odin PDA button, I want to flash Roto-JMI-Full-v2.zip ?
Few questions:
a) Is this correct way of flashing or I am missing something?
b) Does above flash install Recovery also ?
c) which files need for PHONE and CSC files ?
MId) Which firmware best suitable for Indian Tab ?
Thank you in advance for clarifying above.
Click to expand...
Click to collapse
Install Adfree or something which requires root acess for installation. Once rooted download something like root explorer from market which allows you to backup the modem.bin file. Or me or somebody else can just upload the file here.
Read the post/link in the thread where you downloaded Roto's JMI rom.
Use the .pit file from Roto's link not the thing which you posted...same place where you got the same ROM file. If you are flashing first time/from another rom then use the Full v2 zip file. Else use Update v2 when flashing from one of Roto's rom.
Connect the tab to your pc, reboot and go into download mode...press power+vol down button while rebooting...a yellow triangle icon with an android digging will come up...to get out of download mode,just keep the power button pressed till it rebooted normally.
Once in download mode, open up Odin and check that the yellow com box option is on. Check repartition option to ensure everything is wiped and you have a fresh install from scratch.
For PIT select the pit file downloaded from roto's link
For PDA select the Full.tar file
For PHONE select the modem.bin file
For CSC leave it blank...
Once done, recheck and hit start.
PLEASE CHECK ROTO'S JMI V2 THREAD IN THE DEVELOPEMENT SECTION...it has a link to howto which is old but gives some idea of how to proceed...for pit, pda, phone follow as I suggested and things will go fine...
Sent from my GT-P1000 using XDA App
Thank you.. I will do the same let you know the status....
blackheart2925 said:
Install Adfree or something which requires root acess for installation. Once rooted download something like root explorer from market which allows you to backup the modem.bin file. Or me or somebody else can just upload the file here.
Read the post/link in the thread where you downloaded Roto's JMI rom.
Use the .pit file from Roto's link not the thing which you posted...same place where you got the same ROM file. If you are flashing first time/from another rom then use the Full v2 zip file. Else use Update v2 when flashing from one of Roto's rom.
Connect the tab to your pc, reboot and go into download mode...press power+vol down button while rebooting...a yellow triangle icon with an android digging will come up...to get out of download mode,just keep the power button pressed till it rebooted normally.
Once in download mode, open up Odin and check that the yellow com box option is on. Check repartition option to ensure everything is wiped and you have a fresh install from scratch.
For PIT select the pit file downloaded from roto's link
For PDA select the Full.tar file
For PHONE select the modem.bin file
For CSC leave it blank...
Once done, recheck and hit start.
PLEASE CHECK ROTO'S JMI V2 THREAD IN THE DEVELOPEMENT SECTION...it has a link to howto which is old but gives some idea of how to proceed...for pit, pda, phone follow as I suggested and things will go fine...
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
I followed the steps after flashing 'full' tar, it rebooted tab, started the normally. After that, I verified that, all applications , phone (GSM) and wifi working fine.
Now my question is do I really need to flash *second* tar file ? what is it for ?
^^No. It is only for people upgrading from previous versions! You are good to go!
Now, I want to install CWM recovery. Please some one can confirm below steps:
1. Make sure to have Samsung Kies installed, and your tab at least connected once, to be sure the drivers are correct.
2. Your Tab must be Rooted.
3. If you wish to do a backup, now is the time.
4. You will need an SD Card with enough free space for the filesystem conversion, and to put the Overcome ROM on before we start. (An empty 4gb should be plenty, as long as it is empty, or close too)
5. Download and Extract the following file to your computer: http://www.apksmash.com/corodius/galaxytab.zip (Contains "Odin3 v.1.7.exe" "Overcome_Kernel_v1.0")
Now, we will Install the Kernel and perform the EXT4 filesystem conversion.
1. Turn off your Galaxy Tab.
2. Turn your Galaxy Tab on into DOWNLOAD mode (Press Volume DOWN and Power On at the same time).
3. Open Odin3 v1.7.exe on your PC.
4. Connect your Galaxy Tab to your PC via the USB cable.
5. Make Sure the ID:COM box is highlighted yellow (meaning it sees your tab).
6. Click on the PDA button and select the Overcome_Kernel_v1.0.tar file you downloaded earlier (make sure PDA is ticked after selecting the file).
7. The only boxes ticked should be:
A. Auto Reboot
B. F. Reset Time
C. The PDA tickbox
8. Click start and wait for PASS! to show highlighted green on Odin.
9. Your Galaxy Tab will Reboot, and get stuck on the Samsung Boot Screen. This is fine.
10. Turn your Galaxy Tab off by holding the power button for about 5 seconds.
11. Turn your Galaxy Tab on into RECOVERY mode (Press Volume UP and Power On at the same time).
12. The Galaxy Tab will now perform the EXT4 conversion.
13. Sit tight, depending on how much data you have, this can take quite a long time.
14. Once finished, click reboot system now (by pressing the power button).
At this point, You have installed the Overcome Kernel with CWM included and converted the Filesystem to EXT4. It has been reported that many stock ROMs will boot and run fine now, however some may not, but it just depends on your ROM etc.
http://forum.xda-developers.com/showthread.php?p=11713685.
Would be there any problem ? or is there any easy way to install CWM Recovery.
I had bricked my tab while modding battery icon and it was not booting now. Now i want to flash with the custom rom available here. I am noob to flashing so just want to confirm the steps mentioned above applicable to the bricked tab. Can somebody guide me for bircked tab.
Please mentioned the good custom rom with Ext4 conversion at the time of install. I am using indian tab.
@OP:- Sorry for hijacking this thread but find some info here for my queries
Can you get into download mode? If yes then you should be able to flash...but I would suggest checking"I bricked my tab" threads in general or developement section...
Sent from my GT-P1000 using XDA App
nchary05 said:
Now, I want to install CWM recovery. Please some one can confirm below steps:
1. Make sure to have Samsung Kies installed, and your tab at least connected once, to be sure the drivers are correct.
2. Your Tab must be Rooted.
3. If you wish to do a backup, now is the time.
4. You will need an SD Card with enough free space for the filesystem conversion, and to put the Overcome ROM on before we start. (An empty 4gb should be plenty, as long as it is empty, or close too)
5. Download and Extract the following file to your computer: http://www.apksmash.com/corodius/galaxytab.zip (Contains "Odin3 v.1.7.exe" "Overcome_Kernel_v1.0")
Now, we will Install the Kernel and perform the EXT4 filesystem conversion.
1. Turn off your Galaxy Tab.
2. Turn your Galaxy Tab on into DOWNLOAD mode (Press Volume DOWN and Power On at the same time).
3. Open Odin3 v1.7.exe on your PC.
4. Connect your Galaxy Tab to your PC via the USB cable.
5. Make Sure the ID:COM box is highlighted yellow (meaning it sees your tab).
6. Click on the PDA button and select the Overcome_Kernel_v1.0.tar file you downloaded earlier (make sure PDA is ticked after selecting the file).
7. The only boxes ticked should be:
A. Auto Reboot
B. F. Reset Time
C. The PDA tickbox
8. Click start and wait for PASS! to show highlighted green on Odin.
9. Your Galaxy Tab will Reboot, and get stuck on the Samsung Boot Screen. This is fine.
10. Turn your Galaxy Tab off by holding the power button for about 5 seconds.
11. Turn your Galaxy Tab on into RECOVERY mode (Press Volume UP and Power On at the same time).
12. The Galaxy Tab will now perform the EXT4 conversion.
13. Sit tight, depending on how much data you have, this can take quite a long time.
14. Once finished, click reboot system now (by pressing the power button).
At this point, You have installed the Overcome Kernel with CWM included and converted the Filesystem to EXT4. It has been reported that many stock ROMs will boot and run fine now, however some may not, but it just depends on your ROM etc.
http://forum.xda-developers.com/showthread.php?p=11713685.
Would be there any problem ? or is there any easy way to install CWM Recovery.
Click to expand...
Click to collapse
I followed above steps and could able to install CWM RECOVER.
congrats dude
maddy_in65 said:
I had bricked my tab while modding battery icon and it was not booting now. Now i want to flash with the custom rom available here. I am noob to flashing so just want to confirm the steps mentioned above applicable to the bricked tab. Can somebody guide me for bircked tab.
Please mentioned the good custom rom with Ext4 conversion at the time of install. I am using indian tab.
@OP:- Sorry for hijacking this thread but find some info here for my queries
Click to expand...
Click to collapse
can you just tel me which modem.bin are u using coz i was planning to flash but stuck on decision bcoz of modem... is it jpz or jk3? or any other
A new GB version is available DDJPA
http://forum.xda-developers.com/showthread.php?t=1226674
need PDA PIT PHONE CSC files
Kindly send me the links for downloading the PDA PIT PHONE CSC files as I could find only broken links.
My samsung tab (Version: P1000DDJK3/P1000ODDJJ1/P1000DDJJ1)) is bricked and won't boot.
Than You
nchary05 said:
Could some one for benefit of Indian Tab Owners, write a step-by-step instructions or guide. Lot of information to digest for a new user including details of 1) rooting 2) installing recovery 3) flashing ... this information would be great useful for everyone.
My Tab details :
(Model: GT-P1000 | Code: INU | Version: P1000DDJK3/P1000ODDJJ1/P1000DDJJ1)
Click to expand...
Click to collapse
I just tried to flash to DarkCore_2.9.3_JVQ.tar using the Darky Rom and now these blue eyes keep coming up blinking? What do??
I tried factory reset and now the Samsung Galaxy S original startup keeps coming up again and again.... i can still go into recovery mode any help pleaseeeeee
Ok your only chance is to flash stock through odin! Go to this website and download your firmware http://www.sammobile.com/threads/17-Samsung-I9000-Galaxy-S-Firmwares.. Your then going to extract it to your desktop( I find it easier using desktop). Next download odin http://www.megaupload.com/?d=MADK0XTB, then follow this guide http://www.androidgalaxy.net/how-to-flash-a-galaxy-s-phone-back-to-stock/
Once you have that all downloaded open odin, add your PIT file tick re-partition, add your PDA,PHONE and CSC and THEN put your phone in DL mode and connect it... Don't be afraid of the thanks button
Corbin. said:
Ok your only chance is to flash stock through odin! Go to this website and download your firmware http://www.sammobile.com/threads/17-Samsung-I9000-Galaxy-S-Firmwares.. Your then going to extract it to your desktop( I find it easier using desktop). Next download odin http://www.megaupload.com/?d=MADK0XTB, then follow this guide http://www.androidgalaxy.net/how-to-flash-a-galaxy-s-phone-back-to-stock/
Once you have that all downloaded open odin, add your PIT file tick re-partition, add your PDA,PHONE and CSC and THEN put your phone in DL mode and connect it... Don't be afraid of the thanks button
Click to expand...
Click to collapse
thanks but the only problem is my phone doesn't show up in Odin?
I want to go back to gingerbread am rinning Dark Knight rom any help plz
Why God .. why ...
Flash stock through ODIN or Heimdall and thats it
If you had to ask this, it's probably a good thing you're going back to stock.
Sent from my Telus Fascinate running OneCosmics ICS!
why would you say that
Get stock ROM here.
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9000&r=-1#modelsa
You need stock ROM (3 file stock ROM), Odin & Pit512.
1. Start ODIN.
2. Select the files into the relevant places in ODIN.
3. Click repartition.
4. Put phone into download mode.
5. Connect phone to pc.
6. wait for Odin to connect to phone.
7. click start.
8. wait for ODIN to finish & for phone to reboot.
You must have pit512 and click repartition as ICS uses a different file system to Gingerbread.
You may have a boot loop after doing this. I have had this occasionally. To solve this reflash with ODIN. This time make sure repartition is unchecked and don't flash pit file.
Sorry Screen shot says scs. I meant CSC.
Stock, ICS Update new to Samsung devices. I own a Note for 10 days. It is on 2.3.6 XILB1 which I found out to be Italian Global. It is not rooted.
I would like to upgrade to ICS but when I searched the forum the are many threads with download links and I am confused wichone to download(wipe or non wipw???)
In a thread I've found
Just download the ICS file and flash via Odin.
1. Unrar ICS file.
2: Power off the phone.
3: Press and hold Power+Home+Vol Down to enter download mode.
4: Open ODIN and under PDA, load the tar/md5 file which you just downloaded.
5: Under ID:COM, wait for the device to be detected. You will see a yellow color with some port number inside it.
6: Hit Start and wait for ODIN to flash the new ICS firmware on your Galaxy Note.
As far as I understand I need PC Odin to flash but will it harm my device to flash a Germany Rom to Italian device. With HTC I had to change the CID according to ROM or Super CID the phone.
I prefer a clean install and setup so I don't mind loosing all my data and install all my apps back. Also I am mot planning to root my Note for now since I've only used root change boot animation and install Quick Boot and I can live without them.
A link to direct me to the correct file would be very appreciated.
thanks and best regards...
Lowyat forum
DarthLuca said:
Stock, ICS Update new to Samsung devices. I own a Note for 10 days. It is on 2.3.6 XILB1 which I found out to be Italian Global. It is not rooted.
I would like to upgrade to ICS but when I searched the forum the are many threads with download links and I am confused wichone to download(wipe or non wipw???)
In a thread I've found
Just download the ICS file and flash via Odin.
1. Unrar ICS file.
2: Power off the phone.
3: Press and hold Power+Home+Vol Down to enter download mode.
4: Open ODIN and under PDA, load the tar/md5 file which you just downloaded.
5: Under ID:COM, wait for the device to be detected. You will see a yellow color with some port number inside it.
6: Hit Start and wait for ODIN to flash the new ICS firmware on your Galaxy Note.
As far as I understand I need PC Odin to flash but will it harm my device to flash a Germany Rom to Italian device. With HTC I had to change the CID according to ROM or Super CID the phone.
I prefer a clean install and setup so I don't mind loosing all my data and install all my apps back. Also I am mot planning to root my Note for now since I've only used root change boot animation and install Quick Boot and I can live without them.
A link to direct me to the correct file would be very appreciated.
thanks and best regards...
Click to expand...
Click to collapse
You may want to refer to this forum http://forum.lowyat.net/topic/2337733
lots of guide
- Download the ROM from here
- Open PC Odin
- Go into Download mode on your Note
- Extract the zip and flash the md5 file
Voila.
the md5 file goes in the pda slot of pc odin, if your not familiar with it and make sure you have the samsung drivers installed, easy way is to install kies and plug your phone in and wait for it to connect once to ensure you have the proper drivers
I keep getting stuck on zimage. Uninstalled kies and left the drivers, so its not that. Any ideas. Never had issues flashing my epic with odin.
hey guys,
a buddy of mine updated his gnote to the new lrq firmware, he rooted, it was working and he had hydra core standard kernal running on it, he
decided to run the cleanote 13.4 OC on it via mobile odin, when he flashed it it suddenly rebooted and is now stuck on the samsung logo, the reboot into recovery code commands will no longer work as well........help us out guys he didnt do a factory reset so is there anything that can be done???
thanks
mafioso345 said:
hey guys,
a buddy of mine updated his gnote to the new lrq firmware, he rooted, it was working and he had hydra core standard kernal running on it, he
decided to run the cleanote 13.4 OC on it via mobile odin, when he flashed it it suddenly rebooted and is now stuck on the samsung logo, the reboot into recovery code commands will no longer work as well........help us out guys he didnt do a factory reset so is there anything that can be done???
thanks
Click to expand...
Click to collapse
tell him to flash new stock rom using odin.
thehackersz said:
tell him to flash new stock rom using odin.
Click to expand...
Click to collapse
thanks will try and revert back.....
Step 1: Download appropriate stock ROM on your PC/Laptop and Unzip it.
Step 2: Download PC Odin3-v3.04
Step 3: Stop all firewall/antivirus programs runninig in your PC, and then run ODIN.
Step4: Start your gNote in DOWNLOADER mode (by pressing Vol. Down+Home+Powerkey)
Step 5: Connect your gNote (in downloader mode) to your PC/Laptop
Step 6: Select appropriate (PDA) file in the unzipped stock ROM and click START in Odin
After few minutes.... when your gNote restarts, you are done. Enjoy...
(u may get the detailed guide and download links from http://forum.xda-developers.com/showthread.php?t=1424997 (thanks dr.ketan!!)
Ravindra9 said:
Step 1: Download appropriate stock ROM on your PC/Laptop and Unzip it.
Step 2: Download PC Odin3-v3.04
Step 3: Stop all firewall/antivirus programs runninig in your PC, and then run ODIN.
Step4: Start your gNote in DOWNLOADER mode (by pressing Vol. Down+Home+Powerkey)
Step 5: Connect your gNote (in downloader mode) to your PC/Laptop
Step 6: Select appropriate (PDA) file in the unzipped stock ROM and click START in Odin
After few minutes.... when your gNote restarts, you are done. Enjoy...
(u may get the detailed guide and download links from http://forum.xda-developers.com/showthread.php?t=1424997 (thanks dr.ketan!!)
Click to expand...
Click to collapse
Also connect to rear (mobo) usb ports not front extensions for stable connection.
Sent from my GT-N7000 using xda app-developers app
thanks all he installed the stock lrq and was successful....