Database Develop

ISC RAM problem

Hi folks!!
Take a look to this I found
http://developer.sonymobile.com/wp/...ical-differences-between-gingerbread-and-ics/
It clearly explains why 1/3 of I9100G total RAM is not seen by us.

request
please do not start new tread for small topics like this

It's a theme of great interest, I think

scontin said:
Hi folks!!
Take a look to this I found
http://developer.sonymobile.com/wp/...ical-differences-between-gingerbread-and-ics/
It clearly explains why 1/3 of I9100G total RAM is not seen by us.
Click to expand...
Click to collapse
THANKS

And why it isnt on the normal SG2 too?
Sent from my GT-I9100G mit Tapatalk 2

I don't think it's a problem, with the new ICS formware finally my i9100g is going great! Solved many bugs of GB, good interface and performances.

But why it isn't on the normal SG2 version and only on the G version?

Maybe it can depend by the fact ICS was developed on OMAP architetecture?
Galaxy Nexus have the same amount of RAM.................

Thank you for your information.
---------- Post added at 12:15 AM ---------- Previous post was at 12:08 AM ----------
scontin said:
Maybe it can depend by the fact ICS was developed on OMAP architetecture?
Galaxy Nexus have the same amount of RAM.................
Click to expand...
Click to collapse
The Galaxy Nexus was the first to run ICS, So it's fully compatible with it, but I9100G received the 4.0 after a long time, that means there were so many problems to solve. And I think this is one of them, I think it has relation with the boot or hardware resources.

According to me it's not totally correct.
Maybe Samsung engineers were occupied by S3 launch, so I9100G was put into the second floor

atomo37 said:
I don't think it's a problem, with the new ICS formware finally my i9100g is going great! Solved many bugs of GB, good interface and performances.
Click to expand...
Click to collapse
Which ICS do you have?
Sent from my GT-I9100G using XDA

neshro said:
Which ICS do you have?
Sent from my GT-I9100G using XDA
Click to expand...
Click to collapse
basically all ics released is the same but some say malaysia version is better than india...its matter of personal opinion but CM9 is far better than all stock ics

dante10 said:
basically all ics released is the same but some say malaysia version is better than india...its matter of personal opinion but CM9 is far better than all stock ics
Click to expand...
Click to collapse
cm9 is best
only one thing suckz
i cant play some videoz on my phone
Sent from my GT-I9100G using xda premium

[Q] CM10 Nightly build autorotate not working

Hi,
I can't post on the Developer Forum because I don't have 10 posts yet.
Yesterday night I've installed CM10 nightly build on my P1000 and ROM looks really nice.
They only problem I'm having now is that it screen autorotate doesn't seem to work.
I've searched in the thread but couldn't find anything.
Do you know if it's a known bug or if there is a workaround for it?
Thanks

Sometimes it doesn't work.
Anyway, even when you can, please dont post in developer forum unless you are discussing code fix or things like that.
Sent from my GT-I9300 using xda app-developers app

priyana said:
Sometimes it doesn't work.
Anyway, even when you can, please dont post in developer forum unless you are discussing code fix or things like that.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
So where does one report bugs that's not been reported?
I have the same problem on my gt-P7500. Am also looking for a fix.

snuttis said:
So where does one report bugs that's not been reported?
I have the same problem on my gt-P7500. Am also looking for a fix.
Click to expand...
Click to collapse
You can post bug reports in the thread belonging to the ROM you're running, that's fine. For your issue you're in the wrong device forum as you have the 10.1 tab not original 7" which this forum is for.

I've solved the problem installing Alroger CM10 ROM (2012/11/04) which includes HumberOS kernel.
The ROM is simply amazing and our old good tablet has never looked so fresh.
I was going to resume my VPN configuration to a CISCO router using Get-a-robot-VPN when I realized that AnyConnect is finally available.
VPN works like a charm and I can connect to my Linux & Windows box at work without any problem.
Pity that I can't post on the Dev forum yet but really thanks to all the great devs (Humberos,cdesai, Alroger, CM team and all the rest) who made this ROM possible.

[Q] Kernel 3.0.xx for Ace

Hey guys
I've been watching out the work of psyke83 by porting kernel 3.0.31 to msm7x27 devices in madteam forum and him next release of CM10.1 for Galaxy 5 (no ETAs) will already be using this new kernel, how you
can see in changelog maded by himself (http://madteam.co/forum/development-8/(dev)-cyanogenmod-10-1-galaxy5-port-(androidarmv6)/).
Considering the good things he comented in changelog by bringing kernel 3.0.31 to Galaxy 5, i'm wondering if developers here are already knowing that and if the same will occur to our Ace.
Will we have kernel 3.0.xx working on futures 4.2 based ROMs? Here is the link to the kernel development itself http://madteam.co/forum/development...el-3-0-8-porting-for-samsung-msm7x27-devices/.

Would be awesome if devs would implement latest 3.x kernel
Sent from my GT-S5830 using xda app-developers app

We have already 3.0.31.1 kernel xD )) Its working awesome. Big battery life and big performance

P_A said:
We have already 3.0.31.1 kernel xD )) Its working awesome. Big battery life and big performance
Click to expand...
Click to collapse
who is "we"?
Gesendet von meinem Nexus 7 mit Tapatalk 2

..

links for download?

Look at this: http://forum.xda-developers.com/showpost.php?p=39970645&postcount=263

Psyke83 checked the kernel and found out that this is just
the older androidarmv6 2.6.37 kernel with the version number faked in the kernel Makefile.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=39972798#post39972798

nikwen said:
Psyke83 checked the kernel and found out that this is just
http://forum.xda-developers.com/showthread.php?p=39972798#post39972798
Click to expand...
Click to collapse
Yea, this one was a fake, but i was talking about the real development that is being made by psyke and the others. I really expect to see our legacy devices (Ace, G5, Mini, Gio, etc) running this kernel with android 4.2.1

Could anybody please post the link to his kernel 3.xx sources here as I am not a member of the madteam forum and can't view links there for that reason?
EDIT: Found it: https://github.com/psyke83/android_kernel_samsung_msm
---------- Post added at 07:02 PM ---------- Previous post was at 06:59 PM ----------
And does anybody know why they can not get it booting on our Ace?

[Q] Issues installing new ROMS after CM

Hey Guys,
I have P990 and I'm using CM10 nightly, and I really want to change ROM as this works really bad on my device.
I downloaded DjangoManouche X 1.6.1 and whenever I go to install, it goes through the first steps, then screen gets black and goes back to Clockwork Recovery. I tried with other ROMs and similar things happen.
What could it be?
Thanks|

Did you make ful wipe?
Factory reset,wipe cache partiton,wipe data,wipe cache,wipe system and wipe dlvik.
Sent from my LG-P880 using xda app-developers app

xperia u20i said:
Did you make ful wipe?
Factory reset,wipe cache partiton,wipe data,wipe cache,wipe system and wipe dlvik.
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Thanks for your response.
Yes, I've wiped everything, I tried formatting everything, I did a factory reset, all of that

I don't know...maybe you could try reflash recovery...
And do you pay attention on wich bootloader version of rom you installing...
Sorry for bad english
Sent from my LG-P880 using xda app-developers app
---------- Post added at 07:40 PM ---------- Previous post was at 07:38 PM ----------
And if you installing from external sd card,maybe that could be problem...try from internal...maybe is sd card broken
Sent from my LG-P880 using xda app-developers app

xperia u20i said:
I don't know...maybe you could try reflash recovery...
And do you pay attention on wich bootloader version of rom you installing...
Sorry for bad english
Sent from my LG-P880 using xda app-developers app
---------- Post added at 07:40 PM ---------- Previous post was at 07:38 PM ----------
And if you installing from external sd card,maybe that could be problem...try from internal...maybe is sd card broken
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Sorry for my ignorance,
how can I do that?

Oh also, I can install other CM ROMs, those are the only ROMs I can install...not other one!

With all in one tool i think there must be option,...i'm not expert so you better check this before try'n...but first try install rom from internal card if you didn't...
Sent from my LG-P880 using xda app-developers app

xperia u20i said:
With all in one tool i think there must be option,...i'm not expert so you better check this before try'n...but first try install rom from internal card if you didn't...
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Ok, so a few things I haven't mentioned before, whenever I connect my phone VIA usb to my computer, nothing happens. I don't have the possibility to flash anything VIA USB, so what can I do?

Do you install all drivers?look in all in one tool section...there is everything...
Sent from my LG-P880 using xda app-developers app

if you're on an official cm nightly then you're on a old bootloader... django is on the new bootloader...
search dev thread for aio tools and how to switch to a new bootloader
edit:
or install one of cm based old bl roms outthere (there is also an old/new bootloader converter tool somewhere in dev thread as well but i don't know if it works for converting all roms - it worked for me on tonyp "the rom" roms up to build 26)

60nine said:
if you're on an official cm nightly then you're on a old bootloader... django is on the new bootloader...
search dev thread for aio tools and how to switch to a new bootloader
edit:
or install one of cm based old bl roms outthere (there is also an old/new bootloader converter tool somewhere in dev thread as well but i don't know if it works for converting all roms - it worked for me on tonyp "the rom" roms up to build 26)
Click to expand...
Click to collapse
I just installed CM7 stable, so what should I do now?

And how you did this?where was the problem?
Sent from my LG-P880 using xda app-developers app

why cm7?
---------- Post added at 09:02 PM ---------- Previous post was at 09:00 PM ----------
xperia u20i said:
And how you did this?where was the problem?
Click to expand...
Click to collapse
i explained his problem, but i still don't know why he installed a prehistoric cm7 instead one of the newer cm10.2 based roms

I wonder to...maybe is gb lower... who know's
Sent from my LG-P880 using xda app-developers app

xperia u20i said:
I wonder to...maybe is gb lower... who know's
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Well, just because it's the only ROM I can install. Still want to upgrade, but I can't do anything. USB isn't working, ROM from external SD don't install...

don't get me wrong, cm7 is a good rom (especially if you installed Temasek one + vadonka kernel) - battery is great with this combo (i was using that combo for almost a year until cm10/10.1/10.2 versions of tonyp roms + pengus kernels came out in the beginning of 2013)...
but cm10.2 has some usefull stuff and many improvements over cm7...
i can only suggest you to read some more threads in the developer section... moving to a new bootloader can give you some more benefits if you're into the newest roms (since the rom developers usually support only the new bootloader first, and then they make an old bootloader versions of their roms/kernels as well - or they don't - it's up to them and their free time)
i'm also considering to finally switch to a new bootloader - but i'm still waiting for the new cm11 (kitkat) roms and 3.1+ kernel to become stable enough for a daily use...
it's up to you to see what you need most out of the rom... but some reading before flashing is mandatory... if you've read some more - you'd already know your problem before i wrote my post and explaining the old/new bl issue...
once a week someone comes up with the same problem because he doesn't read about bootloaders or is just lazy to read the 1st posts in the rom threads...
i hope i helped... cheers

occured kenblis
60nine said:
don't get me wrong, cm7 is a good rom (especially if you installed Temasek one + vadonka kernel) - battery is great with this combo (i was using that combo for almost a year until cm10/10.1/10.2 versions of tonyp roms + pengus kernels came out in the beginning of 2013)...
but cm10.2 has some usefull stuff and many improvements over cm7...
i can only suggest you to read some more threads in the developer section... moving to a new bootloader can give you some more benefits if you're into the newest roms (since the rom developers usually support only the new bootloader first, and then they make an old bootloader versions of their roms/kernels as well - or they don't - it's up to them and their free time)
i'm also considering to finally switch to a new bootloader - but i'm still waiting for the new cm11 (kitkat) roms and 3.1+ kernel to become stable enough for a daily use...
it's up to you to see what you need most out of the rom... but some reading before flashing is mandatory... if you've read some more - you'd already know your problem before i wrote my post and explaining the old/new bl issue...
once a week someone comes up with the same problem because he doesn't read about bootloaders or is just lazy to read the 1st posts in the rom threads...
i hope i helped... cheers
Click to expand...
Click to collapse
How is Cm10.2 working for you? Battery life/speed/etc
I had 10.1 I believe and it was horrible.
I can' install new bootloaders, etc...as I can't enter debug mode, nor do anything

just to make sure...
your usb doesn't work when the phone is fully booted into the rom or it doesn't work for SW upgrade?
did you try other usb ports? (don't use usb hubs for this, especially for SW upgrade stuff)
did you install the correct windows drivers for the phone?
---------- Post added at 09:27 PM ---------- Previous post was at 09:23 PM ----------
tom9191 said:
I had 10.1 I believe and it was horrible.
Click to expand...
Click to collapse
it was horrible if you used the official CM10.1 nightlies... not if you've been using tonyp cm10.1 based roms and pengus kernels... believe me...
currently i'm on the tonyp "The rom" build 26 + pengus kk126 kernel (no ram hack version)
battery lasts for almost 2 days with moderate use (around 3 hrs screen on + wi-fi on, some calls, some messages)
phone is snappy, i don't have syncs turned on in any app...
phone is oc-ed to 1500mhz (min 216, max 1500mhz), and if you care about the benchmarks - it gives a solid 9000+ in antutu...
for a 3 year old phone - i'm satisfied enough...
btw what version of cwm do you have?
your starting point can be here
http://forum.xda-developers.com/showthread.php?t=2020737
and please at least read the 1st page of the thread if not all of it (for user comments)
there is also an option to install the correct windows drivers and a tutorial for windows 8 (i'm on win7 x64)

I've tried different ports, different cables, different copmuters...I've read that a lot of people have this issue though, especially after upgrading to CM7...which was my case. Ever since I haven't been able to do it
60nine said:
just to make sure...
your usb doesn't work when the phone is fully booted into the rom or it doesn't work for SW upgrade?
did you try other usb ports? (don't use usb hubs for this, especially for SW upgrade stuff)
did you install the correct windows drivers for the phone?
---------- Post added at 09:27 PM ---------- Previous post was at 09:23 PM ----------
it was horrible if you used the official CM10.1 nightlies... not if you've been using tonyp cm10.1 based roms and pengus kernels... believe me...
currently i'm on the tonyp "The rom" build 26 + pengus kk126 kernel (no ram hack version)
battery lasts for almost 2 days with moderate use (around 3 hrs screen on + wi-fi on, some calls, some messages)
phone is snappy, i don't have syncs turned on in any app...
phone is oc-ed to 1500mhz (min 216, max 1500mhz), and if you care about the benchmarks - it gives a solid 9000+ in antutu...
for a 3 year old phone - i'm satisfied enough...
btw what version of cwm do you have?
your starting point can be here
http://forum.xda-developers.com/showthread.php?t=2020737
and please at least read the 1st page of the thread if not all of it (for user comments)
there is also an option to install the correct windows drivers and a tutorial for windows 8 (i'm on win7 x64)
Click to expand...
Click to collapse

tom9191 said:
I've tried different ports, different cables, different copmuters...I've read that a lot of people have this issue though, especially after upgrading to CM7...which was my case. Ever since I haven't been able to do it
Click to expand...
Click to collapse
omg...this is a puzzle (at least for me ,maybe some on can solve this in a snap,but it really seems complicated)
first, we need to resolved why smart flash won't recognize your device...than everything should go with no problems
---------- Post added at 11:19 PM ---------- Previous post was at 11:06 PM ----------
what color is INSTALL APX in aio toolkit...is it gray or is white like every thing else, when you connect phone?
if you have installed all drivers(lg united,nvflash drivers,apx,adb usb drivers...that is in tonyp basketbuild downloads in p990 staff-->various ) and if you are not did this: SU660 Users: Download Both P990 & SU660-AddOn packages. Run & extract the P990 first and then extract in the same folder the SU660-AddOn. AIO-Toolkit will be converted to support SU660 device
by mistake i really dont know where is problem...

Note 5 massive battery drain [Please help ASAP]

Hi,
I am new to android and just 4 days after buying the note 5,I am having a very bad battery drain.I lose like 30% in less than 2 hours when on idle and wifi off.I rooted and install arter97's custom kernel but no luck so what should I do ?
Thanks

I would try doing a complete factory wipe with stock Rom and kernel, not load any apps and test the battery drain overnight. I have 920i with OJ4 and I lose 3% overnight with data and wifi on.
Sent from my SM-N920I using Tapatalk

Flash Dr Ketan's L8 (thread Android Development) if your model is supported. This has been solved in his ROM
Sent from my SM-N920I using Tapatalk
---------- Post added at 08:41 AM ---------- Previous post was at 08:17 AM ----------
MohamedRaafat said:
Hi,
I am new to android and just 4 days after buying the note 5,I am having a very bad battery drain.I lose like 30% in less than 2 hours when on idle and wifi off.I rooted and install arter97's custom kernel but no luck so what should I do ?
Thanks
Click to expand...
Click to collapse
Read this thread http://forum.xda-developers.com/note5/general/how-to-root-note-5-t3205073
In the final few pages @drketan makes the point that although you don't need a custom kernel after super su 2.6, it causes the phone not to go into deep sleep. He has published a fix which he is testing. Or you could just flash his ROM, which works brilliantly
Sent from my SM-N920I using Tapatalk

apd said:
Flash Dr Ketan's L8 (thread Android Development) if your model is supported. This has been solved in his ROM
Sent from my SM-N920I using Tapatalk
---------- Post added at 08:41 AM ---------- Previous post was at 08:17 AM ----------
Read this thread http://forum.xda-developers.com/note5/general/how-to-root-note-5-t3205073
In the final few pages @drketan makes the point that although you don't need a custom kernel after super su 2.6, it causes the phone not to go into deep sleep. He has published a fix which he is testing. Or you could just flash his ROM, which works brilliantly
Sent from my SM-N920I using Tapatalk
Click to expand...
Click to collapse
I flashed stock using the smart switcher program and I don't know why but stock firmware is flawed as I didn't install any apps and still I would lose battery with wifi off and without using it ! I have attached a screenshot so is it normal ?

I also have this issue! Flashed multiple stock firmwares and have the issue. I have seen an IMPROVEMENT in Dr. KETAN's rom, but I prefer stock and no modifications. At the moment I'm on the latest stock firmware and am also experiencing this issue... When I get home after College I'll flash Dr. KETAN's rom.
I had also called Samsung to see if this is a known issue but they are unable to pin point the issue and think its a physical fault which it obviously isn't...

nvm

sadpwner said:
Not to derail the thread but that's a plain lie. You've just finished year 12 this year back in October. To say you've entered a college in that time is ludicrous also considering the courses have yet to commence.
Click to expand...
Click to collapse
That's extremely off topic. I'm studying IT at a private college. The college I go to you can start at any time....