I need a Froyo based custom ROM for my galaxy mini.
I am facing some wifi issues with the gingerbread roms like cm7,emanon and also ics based ones.
I need a Custom ROM based on froyo. Also my galaxy mini, when running stock froyo ROM(ddka7) lags frequently.
To be able to use wifi at my home i need froyo roms.
Can you guys please suggest any Froyo based custom ROM for sgm. Also do the stock Froyo Roms of sgm support init.d ?
Please Reply ASAP. Thanks in advance.
Really ? If you need to flash Custom ROM you need ClockWorldMod Recovery (CWMR), and CWM need Gingerbread to work !
So answer is = NO
we have cwm for froyo but no custom rom. so bad luck
init.d?
F4uzan said:
Really ? If you need to flash Custom ROM you need ClockWorldMod Recovery (CWMR), and CWM need Gingerbread to work !
So answer is = NO
Click to expand...
Click to collapse
And what about init.d? Do the stock Froyo firmwares of SGM support init.d scripts like AdrenalnEngine/slaidyboost? Thanks for earlier advice.
sasank360 said:
And what about init.d? Do the stock Froyo firmwares of SGM support init.d scripts like AdrenalnEngine/slaidyboost? Thanks for earlier advice.
Click to expand...
Click to collapse
N O, maybe?
those script will work if you got success in enabling init.d
to enable init.d try the below command
Code:
busybox run-parts /system/etc/init.d
dheeraj (dhlalit11) said:
those script will work if you got success in enabling init.d
to enable init.d try the below command
Code:
busybox run-parts /system/etc/init.d
Click to expand...
Click to collapse
Should I run the above command in terminal emulator?
sasank360 said:
Should I run the above command in terminal emulator?
Click to expand...
Click to collapse
Yes, if not there then where ?
F4uzan said:
Yes, if not there then where ?
Click to expand...
Click to collapse
Hey what about Vanilla ROM? Isn't it based on froyo. If so can you give me the link.
sasank360 said:
Hey what about Vanilla ROM? Isn't it based on froyo. If so can you give me the link.
Click to expand...
Click to collapse
is there any vanilla rom
try this... i only have googled for it so i didn't tryied it.... but if you want you can try...
http://forum.xda-developers.com/showpost.php?p=14678040&postcount=315
dheeraj (dhlalit11) said:
is there any vanilla rom
Click to expand...
Click to collapse
there was, made by parasmi, but it was gb and i can't find it anymore.
!edit!
apparently there is froyo and gingerbread version
You want a froyo ROM and jellybean is out!!!!!!!!!! Dude I suggest you to checkout akop or cm10 by the whisp they are both good roms but you need to be on gingerbread in order to flash them using CWM so good luck.
Sent from my GT-S5570 using xda premium
if you want all things to work then try stock gingerbread 2.3.6
it is very stable and no wifi issues
Vanilla ROM by parasmi
Android version : 2.2.1
Flash method : Odin Multidownloader
Developer : parasmi
Type : Odex & Deodex
Features :
System, data, and cache partitions converted to Ext4
Pre-rooted
With bootanimation
Busybox commands in recovery mode
Init.d support (running custom scripts during boot)
Added tun.ko (for vpn) and cifs.ko (for mounting network shares)
Overclock Kernel by tj_style
Faster SD-Read Speed
ADB as root
LowMemKiller values adjusted
Darktremor App2SD
Link : Here !
Download : Gamefront Server
it would be good if there is a link to the thread so that we can thank the dev
Related
13-08-2011 minimodX slicker than a well-oiled weasel
- installer borrowed/modded from T.J´s & paramasis ideas work
check out paramasis great rom here:http://forum.xda-developers.com/showthread.php?p=15811702#post15811702
now lets see:
pre root deodexed vanilla KPK with su,jit,a2sd,juwes ramscript,dsp manager, Open VPn (tun.ko) Cifs manager (cifs.ko), hosts patched (adsblocked),Stock samsung launcher -wallpaper works now.. Android Keyb - useless pile ocrap -Autokiller mem app -Obsolete, using juwe script in rom instead - less bloat.
Sdbooster - Obsolete -new script in init.d -faster less bloat. CRT fx screen off ( settings-display-enable animatons).
Reboot menu had to go. (you can add it easy if you know what yer doin
yep thats it + gui changes.
The Idea with minimod was to remove bloat - and that worked very well - paramasi and Meistro T.j did great work but still the roms are vanilla and full of stuff I never use - so just try your vanilla or xmod or andro-id or cyano - its a matter of taste.
easy run minimodX @ 7-8xx mhz? - use the OC kernels in paramasi rom and remember to put cache on SDEXT -BEFORE flashing oc kernel
MiniMod X:
http://www.mediafire.com/?kt1syjni94jfa9w
install from cwm
NOTE!: First boot takes time - let it finish
fukit
Flash MiniMod ROM :
Download and copy the latest Minimod ROM to SD Card
Reboot to Recovery Mode
Select install zip from sd card
Select choose zip from sd card
Select the new MiniMod ROM
Select Yes - Install update
Wait till the Installation is finish
Select reboot system now
Install only if you know you have 2.3.4 + CWM
thanks for your minimod
some feedback plz any requests welcome
i do not run this mod on my phone my only request is OC
Thank's bro.. Worth a try...
i have not tried it mate....but gud to see more things happening for mini. hopefully we'll get our own section.
This Mod is Great! Thank You so much Sir!
Hope an overclock upgrade comes out soon!
Installed, now testing
... still no probs, runs fast.
Sent from my GT-S5570 using XDA App
get KPK here:
:
edit
install minimod ontop of KPK
Sent from my GT-S5570 using XDA App
Many thanks for your work. There is no only a dispersal. And so release worthy... Smooth and fast.
Install only if you know you have 2.3.4
Fresh kpi, kpj, kpk or andro-id will do fine
Click to expand...
Click to collapse
I've installed parasmi's rom on my mini. is it safe to install this one?
--nevermind, it works well.. thanks..
i ****ing love it! until now this is the best mod for mini, very smooth, very fast, simply beautyful, and seems everything is working fine
i really like the screen off animaion from cm7 too
thanks very much for your work r33p, hope you will continue this project
installed it on KPK build
KPK recommended - I get very good results with kpk+minimod 3.5
hi r33p!
i've been to andro-id, cm7 (2nd release), and vanilla rom..
now, i'll try your custom rom..
questions:
- is darktremor pre-installed?
- can i do this in your rom? The Best RAM Optimization http://forum.xda-developers.com/showthread.php?t=1111145
If some1 posts some screenshots it'll be nniiiccceeeeee
r33p said:
KPK recommended - I get very good results with kpk+minimod 3.5
Click to expand...
Click to collapse
Hello,
How do I install KPK. I downloaded it via your link. But it is one package.
via CWM or one package in Odin ?
Thanks for your help.
Gr.
KJ
klaasjandegraaf said:
Hello,
How do I install KPK. I downloaded it via your link. But it is one package.
via CWM or one package in Odin ?
Thanks for your help.
Gr.
KJ
Click to expand...
Click to collapse
Install firmware in One package using odin.
Then flash cwm using one package in odin.
then instal rom frm sd card using cwm
HTH
can minimod apply ungaze?
and remove a2sd DT?
Sent from my GT-S5570 using XDA Premium App
Yep t.j released oc kernels
- tested all oc kernels -fail - true even for default andro-id
stay tuned
So i finally managed to find a stock vodafone rom on android 2.3.4 with dutch, however i cannot get any a2sd script working. Anyone else now how to fix this?
race55 said:
So i finally managed to find a stock vodafone rom on android 2.3.4 with dutch, however i cannot get any a2sd script working. Anyone else now how to fix this?
Click to expand...
Click to collapse
What happens if you try flashing darktremor?
By the way, why did you return to stock firmware?
Maybe kernel don't support.
Sent from my Nexus One
Theshawty said:
What happens if you try flashing darktremor?
By the way, why did you return to stock firmware?
Click to expand...
Click to collapse
Proper support for dutch language And the stock look of gingerbread, wich i like. BUt if there is no way to get a2sd to work then i go straight back to cm7. Darktremor a2sd does not do anything, in terminal it says illegall command and a2sdgui says something is wrong. Also ad2sdx does not work, s2e does not work.
It won't work, since you're on the stock ROM with stock kernel. You need kernel that supports A2SD.
Jack_R1 said:
It won't work, since you're on the stock ROM with stock kernel. You need kernel that supports A2SD.
Click to expand...
Click to collapse
WHat kernel supports stock rom and a2sd? Thanks in advance
Any Gingerbread kernel that is marked as suitable for AOSP or AOSP/CM7 should do. Look at the kernel threads, this info will most likely be in the thread title.
Jack_R1 said:
Any Gingerbread kernel that is marked as suitable for AOSP or AOSP/CM7 should do. Look at the kernel threads, this info will most likely be in the thread title.
Click to expand...
Click to collapse
There are so many kernels... Bloody hell! Anyways i would like to use a kernel that is suitable for ad2sdx. Can you please also provide install instructions? (noob here)
Thanks in advance
Install instructions are pretty much straightforward. Reboot to recovery, flash kernel, reboot, see that OS is loading and feels fine, reboot to recovery, flash A2SD, reboot, see that everything's still fine, open Terminal Emulator or A2SDGUI, configure what you want.
I wonder if I can OC my phone and install init.d scripts withouth flashing a custom rom. Is it possible? How?
Thanks in advance
yeah it is possible there are stock firmware oc kernel, download them according to your current firmware
init.d can be used on stock roms with the help of a command "busybox run-parts", many tut are there to enable it
Could you please point me out where are those kernels and the tutorial you mention? I can't seem to find them...
Chaurigol said:
Could you please point me out where are those kernels and the tutorial you mention? I can't seem to find them...
Click to expand...
Click to collapse
oc kernel:- http://forum.xda-developers.com/showthread.php?t=1485122
init.d scripts:- http://forum.xda-developers.com/showthread.php?t=1710980
Does a2sd darktremor script work on stock rom(i mean pure stock rom not stock based custom rom)??
vasu1 said:
Does a2sd darktremor script work on stock rom(i mean pure stock rom not stock based custom rom)??
Click to expand...
Click to collapse
Here you go, works on stock rom, although need to flash some stuff:
http://forum.xda-developers.com/showthread.php?t=1398797
tietganFTW said:
Here you go, works on stock rom, although need to flash some stuff:
http://forum.xda-developers.com/showthread.php?t=1398797
Click to expand...
Click to collapse
i am talking about a2sd darktemor script,,, coz i wanna flash that on galaxy pro... coz there is no custom rom for galaxy pro (B7510)
Can someone tell me a set of scripts i.e few scripts that can be installed at same time (all compatible with each other) that will improve performance of my phone. (Don't need any app2sd script)
Thanks in advanced!
Sent from my Galaxy Ace-i using xda premium
Installing many scripts which are really the same can cause conflicts.Adrenaline 4.3 is good..Try Domscript,it was good for me in stock rom.It is better to flash any one.
On Jellyblast 3.0.3
andy.acei said:
Installing many scripts which are really the same can cause conflicts.Adrenaline 4.3 is good..Try Domscript,it was good for me in stock rom.It is better to flash any one.
On Jellyblast 3.0.3
Click to expand...
Click to collapse
Can you please give the link of Adrenaline 4.3?
Sahaj Jain said:
Can you please give the link of Adrenaline 4.3?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1579710
Next time..Search
On Jellyblast 3.0.3
andy.acei said:
http://forum.xda-developers.com/showthread.php?t=1579710
Next time..Search
On Jellyblast 3.0.3
Click to expand...
Click to collapse
I searched, but in S5830i Section. Since it is on S5830 Section is it safe to install it on S5830i? Can I flash it on Simplicity V2.1?
Sahaj Jain said:
I searched, but in S5830i Section. Since it is on S5830 Section is it safe to install it on S5830i? Can I flash it on Simplicity V2.1?
Click to expand...
Click to collapse
Yes you can. Delete previous scripts from /system/etc/init.d folder and then flash the A-Engine (Don't forget to mount /system and /data in cwm recovery before flashing). I tried installing A-Engine v4.4 on S5830i stock & JellyBlast Roms but it drained my battery too fast. V4.3 is working gr8 for me though :good: