Related
I have only 600Mhz.
I cant overclock only underclock, even with OC-Kernel.
The problem is on Stock Firmware 2.3.3 and Costoum Roms.
Is there a Hardware-Bug or what else?
Not all chips are made to the same quality. They only have to reach a certain clock speed to pass quality checks. Certain devices can be overclocked due to being of higher quality.
Sent from my HTC Desire S using XDA App
Yes but the default clock of the ACE is 800Mhz right? But MY default clock is 600Mhz.
I dont have any options to overclock only from 124Mhz - 600Mhz.
The default clock of 800Mhz would be ok for me..
You sure its a ace? Galaxy fit / mini & 551 / europa are 600mhz MSM7227 vs 800mhz MSM7227-t 800mhz galaxy gio / ace.
Yes! Its definitely a ACE i have the Samsung box here .. and there are a big label Galaxy ACE "800Mhz CPU"
Which rom are you using? Did you have the same problem on stock rom?
Do you have setcpu, if you do go on Info ; CPU what does it say ; Cpu Part / Cpu Revision / Hardware / Revision ?
If problem presist then go to Samsung service centre and change your phone dude
Sent from my GT-S5830 using xda premium
GerasVille said:
Which rom are you using? Did you have the same problem on stock rom?
Click to expand...
Click to collapse
Yes the problems are also on stock rom.
I have the costoum rom "CyanogenMod 7.1-cooper-KANG-RC1 Android 2.3.7" with OC-Kernel
Here are some Screenshots
Cr0nFixXx! said:
Yes the problems are also on stock rom.
I have the costoum rom "CyanogenMod 7.1-cooper-KANG-RC1 Android 2.3.7" with OC-Kernel
Here are some Screenshots
Click to expand...
Click to collapse
Hi @Cr0nFixXx!...
It would seem to me that your problem is your Kernel... The details in your first thumbnail show the kernel to be that of a different dev to @Ketut...!!! Your OC Kernel details should read as this : 2.6.35.7-perf-CL562111 [email protected]#4
The frequencies of the Cpu are governed solely by the kernel, so this is without a doubt your limiting factor...
The below kernel is tried & tested by thousands of users & is stable under OC...(check my sig for details)...
You can download this kernel from my dropbox here : http://dl.dropbox.com/u/44779766/cm-7.1-oc-kernel-2.6.35.7-perf-CL562111.zip
Flash this kernel from CWM recovery... Reboot phone, go to cyanogen setting/Performance & you should get the full cpu range for OC...
To see stable max OC set governor to "Performance"... Remember, only increase cpu frequency a little at a time & test for stability before increasing further...
Only when you have found your max stable clock speed can you tick "set on boot"...
FYI : OC kernels can only be used with custom roms... They will not work with stock roms... @Ketut's OC kernel will only work with CM7.1 / 7.2 Roms... Do not try with any other rom...
Stay Breezy n Be Lucky...
Pe"ACE"...
Thanks for your help but .. same problem
I even cant get it to 800Mhz Default Clock
Cr0nFixXx! said:
Thanks for your help but .. same problem
I even cant get it to 800Mhz Default Clock
Click to expand...
Click to collapse
Hey Dude...
This is a very strange problem indeed... The Armv6 cpu is standard 600mhz cpu but samsung factory OC it when it is used in our aces... so we end up with an end-user frequency of 806mhz... Yours won't even reach that out of the box...?
Do me a favour... Flash this rom here : http://dl.dropbox.com/u/44779766/IceCreamSundayFinal_Tweaked.zip
It is IceCreamSunday Final by @Jusada... It is considered the fastest & most stable rom available on XDA & the OC kernel is inclusive of the rom...
Once flashed, go to cyanogenmod settings, performance, cpu & tell me what frequencies you get offered...?
FYI : It doesn't matter what your baseband or firmware version is... Ensure that you are using CWM 5 to flash with... Also ensure that before flashing you do a full system, cache, data, Dalvik wipe to ensure a clean flash... This rom is 7.2 btw...
Stay Breezy n Be Lucky...
Pe"ACE"...
I dont know whats my phones problem but it dont worked for me -.- even max. 600Mhz...
But great thanks for your help!
LoL the first thing that entered my mind is "maybe samsung forgot to overclock" my suggestion is go to samsung and tell them to overclock that.. or simply say it's defective
approach samsung and get new phone..
man if it showing 600 dont overclock
as overclock can damage your cell
be happy with what you are having
LazySam said:
man if it showing 600 dont overclock
as overclock can damage your cell
be happy with what you are having
Click to expand...
Click to collapse
but he should get 800 which he paid for
hey wait isnt ace's cpu like the 600mhz ones but only OC'ed to 800?
I'm done explaining
A fault with the processor probably.. ARMv6 anyway has 600Mhz by default and Ace has been factory overclocked to 800Mhz.. which is the simple reason why each Ace is so different and has so many problems regarding battery life. Overclocking is a delicate procedure..
To the point:
Just take it to the service center to get what you paid for!
hi guys,
I come from a gs 2 and i just bought a note and install alliance rom (gb)
what kernel can overclock the gpu to 400 mhz as the gs2 with siyah kernel and extweaks.
Thanks for your answer ; ) and sorry for my english i'm french
up
pikaone said:
hi guys,
I come from a gs 2 and i just bought a note and install alliance rom (gb)
what kernel can overclock the gpu to 400 mhz as the gs2 with siyah kernel and extweaks.
Thanks for your answer ; ) and sorry for my english i'm french
Click to expand...
Click to collapse
You should probably check in the Alliance Thread if it's supported and works ok, but I remember from my GB days that Abyss 4.2 (Redpill Touch) was about the best kernel you could flash for our Note...
Also when you say "overclock to 400 MHz"...I suppose that you're talking about the minimum frequency. You can overclock your minimum frequency with mostly any kernel that has root.
I use AnTuTu CPU Master from the Play Store. It's free and really easy and intuitive to use.
pikaone said:
hi guys,
I come from a gs 2 and i just bought a note and install alliance rom (gb)
what kernel can overclock the gpu to 400 mhz as the gs2 with siyah kernel and extweaks.
Thanks for your answer ; ) and sorry for my english i'm french
Click to expand...
Click to collapse
The only one I know of that allows GPU over clocking and voltage control is Thor kernel. Not found on xda as the creator is persona non grata. Google it.
I use the app Voltage Control to specify frequency and voltage settings, very useful. Give it a try.
Sent from my GT-N7000 using xda premium
eug3n91 said:
You should probably check in the Alliance Thread if it's supported and works ok, but I remember from my GB days that Abyss 4.2 (Redpill Touch) was about the best kernel you could flash for our Note...
Also when you say "overclock to 400 MHz"...I suppose that you're talking about the minimum frequency. You can overclock your minimum frequency with mostly any kernel that has root.
I use AnTuTu CPU Master from the Play Store. It's free and really easy and intuitive to use.
Click to expand...
Click to collapse
He is saying GPU not CPU thus the 400Mhz.
I use Tegrak to oc the GPU with Franco kernel.
Sent from my GT-N7000 using XDA
Yeah use tegrak overclock but m using Abyss kernel nd my phone is buttery smooth
thanks shaolin95 but i don't find franco kernel for gingerbread, the only i found is for ics, can you give me a link please
edit: i've installed abyss kernel + bought tegrak kernel ultimate and it works ! thanks for your answer
i wanted to ask does overclocking the gpu help alot in games like more 10 fps ? and does it shorter the gpu's life ?
thanks alot
Hello, can you told me how can I overclock my samsung galaxy mini plus please? I searched all over and I don't find anything good.
bogdan99999 said:
Hello, can you told me how can I overclock my samsung galaxy mini plus please? I searched all over and I don't find anything good.
Click to expand...
Click to collapse
Get an overclock kernel for your device and flash it.
u can visit http://yagyagaire.blogspot.com/ u should easy find usefull info (look in blog archive) . all u need 4 little big MINI
(btw i had it , have it still but not using...great android flashing mooding begin)
((bbtw. i gave this phone to my son ( koji se zove kao ti) to learn how to's
^ Tell your son not to meddle with the app named - ROM Manager.
Yeah)))) i exsperienced MINI in all ways had ups and downs, but allways getting out , now i am playing with htc one x , AND THATS THE GAME TO PLAY and not easy one
Sent from my HTC One X using xda app-developers app
yes bot there are a lot of overclock kernels for samsung galaxy mini, not for samsung galaxy mini plus! ( S5570I not S5570 ). I need a kernel that can do this:
864 Mhz ( or the max. frequence that can be overclocked)
832 Mhz
624 Mhz
312 Mhz
156 Mhz
Deep sleep
and to have the following guvernors:
performance
powersave
userspace
conservative
lagfree
interactiveX
savagedzen
scary
brazilianwax
hotplug
smartass2
lionheart
smoothass
lazy
interactive
---3 io schdulers
cfq
noop
deadline
vr
sio
It is similar to this one ( http://forum.xda-developers.com/showthread.php?t=1891682 ), but that is for galaxy Y. Can anyone help me? Or anyone know someone that can make a kernel like this? Thank you very much.
bogdan99999 said:
yes bot there are a lot of overclock kernels for samsung galaxy mini, not for samsung galaxy mini plus! ( S5570I not S5570 ). I need a kernel that can do this:
864 Mhz ( or the max. frequence that can be overclocked)
832 Mhz
624 Mhz
312 Mhz
156 Mhz
Deep sleep
and to have the following guvernors:
performance
powersave
userspace
conservative
lagfree
interactiveX
savagedzen
scary
brazilianwax
hotplug
smartass2
lionheart
smoothass
lazy
interactive
---3 io schdulers
cfq
noop
deadline
vr
sio
It is similar to this one ( http://forum.xda-developers.com/showthread.php?t=1891682 ), but that is for galaxy Y. Can anyone help me? Or anyone know someone that can make a kernel like this? Thank you very much.
Click to expand...
Click to collapse
Maybe you should prey harder that someone will make it
bogdan99999 said:
Hello, can you told me how can I overclock my samsung galaxy mini plus please? I searched all over and I don't find anything good.
Click to expand...
Click to collapse
This Custom ROM (http://forum.xda-developers.com/showthread.php?t=1972961) does include a custom Kernel, which is capable of overclocking with different governors, isn't it?!
So, why not try that.
When I installed that rom my phone goes crazy. It goes into a reboot loop.
PS: that kernel can go just up to 832 Mhz ( wich is default value of processor when you buy the phone)
bogdan99999 said:
When I installed that rom my phone goes crazy. It goes into a reboot loop.
PS: that kernel can go just up to 832 Mhz ( wich is default value of processor when you buy the phone)
Click to expand...
Click to collapse
Or you can try this http://forum.xda-developers.com/showthread.php?t=1464896
That rom is for Galaxy Mini not for Galaxy Mini Plus. It don't work to my phone
vengeance.RA said:
Or you can try this http://forum.xda-developers.com/showthread.php?t=1464896
Click to expand...
Click to collapse
Dia pake Galaxy Mini Plus bukan Mini yang biasa / lawas gan !
Eng : He use Mini Plus and not normal Mini
F4uzan said:
Dia pake Galaxy Mini Plus bukan Mini yang biasa / lawas gan !
Eng : He use Mini Plus and not normal Mini
Click to expand...
Click to collapse
Ind: Waduh?!? Kirain dia pake Mini
Eng: Oops, seems like i made a mistake
vengeance.RA said:
Ind: Waduh?!? Kirain dia pake Mini
Eng: Oops, seems like i made a mistake
Click to expand...
Click to collapse
Ind : Gak apa-apa... kan namanya Manusia...
Eng: No problem... people make mistake everytime
Hey guys
This is my first try in making kernels it's Rafael Baugis/Bieltv3 kernel with overclock (Hope its a real one)
I also used Merruk-Kernel source to help in modifying.
Well the kernel has 7 frequencies 156MHZ 312MHZ 416MHZ 624MHZ 832MHZ 936MHZ 1.248GHZ and ext4/rfs support (Not sure if it mounts both FS at the same time but ti has to)
If you get lags with high frequencies change governor / IO
How to install :
Open Odin, put it in PDA section and flash
Credits:
Rafael Baugis/Bieltv3
Maroc-OS
Styrke said:
Hey guys
This is my first try in making kernels it's Rafael Baugis/Bieltv3 kernel with overclock (Hope its a real one)
I also used Merruk-Kernel source to help in modifying.
Well the kernel has 7 frequencies 156MHZ 312MHZ 416MHZ 624MHZ 832MHZ 936MHZ 1.248GHZ and ext4/rfs support (Not sure if it mounts both FS at the same time but ti has to)
If you get lags with high frequencies change governor / IO
How to install :
Open Odin, put it in PDA section and flash
Credits:
Rafael Baugis/Bieltv3
Maroc-OS
Click to expand...
Click to collapse
I installed it...its very slow....I changed the governor and I/o then it worked....bt its booting too slow and boot animation is also very slow.....
Re: [Kernel] Overclocked (Need testers)
Great work !!!!!!!!!!!
Now we have a kernel with overclock function..
I will try this later......
sent from my gt-s5830i using xda premium
Styrke said:
Hey guys
This is my first try in making kernels it's Rafael Baugis/Bieltv3 kernel with overclock (Hope its a real one)
I also used Merruk-Kernel source to help in modifying.
Well the kernel has 7 frequencies 156MHZ 312MHZ 416MHZ 624MHZ 832MHZ 936MHZ 1.248GHZ and ext4/rfs support (Not sure if it mounts both FS at the same time but ti has to)
If you get lags with high frequencies change governor / IO
How to install :
Open Odin, put it in PDA section and flash
Credits:
Rafael Baugis/Bieltv3
Maroc-OS
Click to expand...
Click to collapse
according to the no frills stats both the frequencies are working fine....
on 936 mhz and governor smartass v2.+ cfq(io).i have a stable stock rom..but battery drains quiet fast..i think the higher frequencies are not undervolted.thanks for the kernel..it would be better if cm support is added..i have found many tutorials for app building..but never found some for kernel building..can u help me with some online stuff.??
edit:-headphones donot work with stock rom..music only work with speakers.
Hmmm . . . 1.248GHZ Frequency? . . . I hope this freq. will dont burn out our phones? . . . i think overclock over 1 GHz it's only for phone suiciders xD btw good work :good: i'll try this kernel later i have a suggesstion . . . can you add OC 1.024 GHz?
Re: [Kernel] Overclocked (Need testers)
Alucard1989pl said:
Hmmm . . . 1.248GHZ Frequency? . . . I hope this freq. will dont burn out our phones? . . . i think overclock over 1 GHz it's only for phone suiciders xD btw good work :good: i'll try this kernel later i have a suggesstion . . . can you add OC 1.024 GHz?
Click to expand...
Click to collapse
I think your right 1.2 ghz not good for our phones
1 ghz is good for our phones.....
sent from my gt-s5830i using xda premium
Re: [Kernel] Overclocked (Need testers)
They should remove 1.2GHz overclock
Otherwise many noobs will blame u if the burn thier processor and ask u for money
Sent from my GT-S5830i using xda premium
Re: [Kernel] Overclocked (Need testers)
First of all let us confirm that...the overclock is really working or not.
Sent from GT S5830i from Broadcom Headquarters.
Odp: [Kernel] Overclocked (Need testers)
Downloading on my ace...
Sent from my X10Mini using xda app-developers app
Re: [Kernel] Overclocked (Need testers)
I dont think overclock is true....its just false values of lower frequency like 936mhz is 624mhz and 1.24ghz is 832mhz.....it is just a placebo effect......many advanced devs in galaxy y thread have tried to overclock our cpu but the result is non prodictive.....i think we need views of senior dev on this matter......
Odp: [Kernel] Overclocked (Need testers)
Do I need to flash Rafael's modules?
Sent from my GT-S5830i using xda app-developers app
-HellRaiser- said:
I dont think overclock is true....its just false values of lower frequency like 936mhz is 624mhz and 1.24ghz is 832mhz.....it is just a placebo effect......many advanced devs in galaxy y thread have tried to overclock our cpu but the result is non prodictive.....i think we need views of senior dev on this matter......
Click to expand...
Click to collapse
If it works on merruk kernel it has to work on this one too.No?
daxanh said:
Do I need to flash Rafael's modules?
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
No you don't need em to change frequencies.
Re: [Kernel] Overclocked (Need testers)
Styrke said:
If it works on merruk kernel it has to work on this one too.No?
No you don't need em to change frequencies.
Click to expand...
Click to collapse
Thats what i am trying to say.....merruk tried to overclock and at first thought that it worked but further examination showed it doesnt work and merruk then confirmed that overclock didnt work....its just a placebo effect....why dont you search his thread in galaxy y forum......same thing happend with rafauel's kernel......you can even contact hell_lock regarding this,he will tell you more about this technically......
So for now i still believe overclock is not true for our device at present.....
-HellRaiser- said:
Thats what i am trying to say.....merruk tried to overclock and at first thought that it worked but further examination showed it doesnt work and merruk then confirmed that overclock didnt work....its just a placebo effect....why dont you search his thread in galaxy y forum......same thing happend with rafauel's kernel......you can even contact hell_lock regarding this,he will tell you more about this technically......
So for now i still believe overclock is not true for our device at present.....
Click to expand...
Click to collapse
Yes it's true I just installed SetCPU and none of the frequencies 416 936 1248 are shown.I tried adding 1500 and the is stable because its always running on 832mhz.
But I didn't understand why 416mhz didn't work did I messed sth ?
hi everyone
to my knowledge, the frequencies are selected by register, According to what we said at the time Rafael in his forum.
The only possibility was to examine some new devices with the chip bcm21553 having frequencies above 1Ghz
Not answer how i know that, i only readed in the rafael kernel section
have a nice day :victory:
overclock function not working
sursha007 said:
overclock function not working
Click to expand...
Click to collapse
Yes dude we can read the title too.
sursha007 said:
overclock function not working
Click to expand...
Click to collapse
Damn! My eyes! I can't see anything now >.< . . .
Hi guys, it seems oc for kernel is now progressnig for galaxy y:
http://forum.xda-developers.com/showthread.php?t=2308037
What do you think about it?
Will we soon oc our kernel?
Hit thanks !
Send from my s5830i.
waiting for it.... but it is to hard to make Oc kernel for our ace. our processor calculate graphic process as well as system process... its really hard. but not impossible ...hope will work for us!!!
Galaxy Y User here..
Galaxy Y forum is flooded with kernels... OC is already in progress
As we both are in Ace-i team I will share my progress on that fb group
I have started trying to OC CPU at 1024Mhz/1.0Ghz!