Database Develop

[q] help required!!!

Hello frnds m new to xda forum...
i rooted my optimus black its on gingerbread v20E
m nt able to flash a custom rom on it...
can anyone plz help me n suggest any custom rom for my phone..

CookieRaider said:
Hello frnds m new to xda forum...
i rooted my optimus black its on gingerbread v20E
m nt able to flash a custom rom on it...
can anyone plz help me n suggest any custom rom for my phone..
Click to expand...
Click to collapse
If its rooted then it has clock work mod recovery install, so just install rom manager from market and select reboot into recovery, have the custom rom's zip copied on your memory card, then after rebooting into recovery do wipe data and reset then select install zip from memory card and select the copied .zip file and it gets install new rom. Zeus is good custom rom, marvel v7 is also good
Sent from my LG-P970 using Tapatalk 2

i tried using cyanogen mod v7 bt my phone went in bootloop at the time of rebooting then i had to install my stock rom again..
this happened twice so now i want to download a working rom
n by zeus n marvel are compatible with v20N only as they have stated...

CookieRaider said:
i tried using cyanogen mod v7 bt my phone went in bootloop at the time of rebooting then i had to install my stock rom again..
this happened twice so now i want to download a working rom
n by zeus n marvel are compatible with v20N only as they have stated...
Click to expand...
Click to collapse
did you do a full wipe before flashing cm7?wipe data/cache and dalvik cache through cwm.anyway since you are new to the forum check this thread.it will help you a lot.
http://forum.xda-developers.com/showthread.php?t=1487105

ya i wipped all dat stuff..
even i wipped battery stats too..
wic rom do you hav n wat is android version??
n thanks for the reply..:thumbup::thumbup:

CookieRaider said:
ya i wipped all dat stuff..
even i wipped battery stats too..
wic rom do you hav n wat is android version??
n thanks for the reply..:thumbup::thumbup:
Click to expand...
Click to collapse
i mostly use zeus 6.11 2.3.4 v20o version.zeus is very stable and fully working but some people experienced sods.here is the thread:http://forum.xda-developers.com/showthread.php?t=1454274
at the moment i use miui but some features are not working:http://forum.xda-developers.com/showthread.php?t=1588360
i have used them all from time to time and marvel is great too with aroma installer (gingerbread 2.3.4 v20o).very stable too:http://forum.xda-developers.com/showthread.php?t=1473592
regarding your problem now.are you able to enter cwm?if yes flash zeus or marvel at first.check the development section.it has many choises there and you can find every information in the first posts.

wic android version of gingerbread do you have on your phone..
sorry for asking again...

CookieRaider said:
wic android version of gingerbread do you have on your phone..
sorry for asking again...
Click to expand...
Click to collapse
In zeus gingerbread 2.3.4 v20o.now that i have miui it is 2.3.7.
Sent from my P-970 using Tapatalk

thnx for the reply n i can enter cwm...:thumbup:
by the way how did you get 2.3.7

CookieRaider said:
thnx for the reply n i can enter cwm...:thumbup:
by the way how did you get 2.3.7
Click to expand...
Click to collapse
The miui in the thread that i posted above is based on gingerbread 2.3.7.like cm7 which is also 2.3.7.
Sent from my P-970 using Tapatalk

to flash any rom do we need to have cyanogen mod installed or it can be flashed independently??

CookieRaider said:
to flash any rom do we need to have cyanogen mod installed or it can be flashed independently??
Click to expand...
Click to collapse
No you just need to have root access and cwm recovery.just remember to do full wipe before flashing a rom.
Sent from my P-970 using Tapatalk

n is miui compatible with any gingerbread version??
i mean to does it works with v20(B/E/N/O) ??

CookieRaider said:
n is miui compatible with any gingerbread version??
i mean to does it works with v20(B/E/N/O) ??
Click to expand...
Click to collapse
I think that you have not quite understand.whichever rom you are going to flash has a specific base.for example zeus has 2.3.4 v20o as a base.when you flash it your phone will have 2.3.4 v20o as a base.what you had before is irrelevant.since you flash a different based rom your firmware will change.take a look at the noob how to that i posted above.it refers to kernels and bases.if you flash nova rom for example then you go back to 2.2.2 froyo.if you flash miui you have 2.3.7.it foesn't matterwhat you have now.try to find some things on your own because we went way off topic and the moderator will close the thread.search is your assistant.
Sent from my P-970 using Tapatalk

ok..
caused lot of inconvenience to you...
sorry...
thnx for the help:thumbup::thumbup:

CookieRaider said:
ok..
caused lot of inconvenience to you...
sorry...
thnx for the help:thumbup::thumbup:
Click to expand...
Click to collapse
No inconvinience.if you want send me pm better for info.i told you that because the moderator will delete the thread if we are off topic.and for thanks you can just hit the thanks button.
Sent from my P-970 using Tapatalk

CookieRaider said:
n is miui compatible with any gingerbread version??
i mean to does it works with v20(B/E/N/O) ??
Click to expand...
Click to collapse
once youre rooted, it dosent matter what base youre using..... cos when you flash a rom you flash together with the base so it changes your whole phone software..... so its no problem switching between bases, you can even flash back froyo/ donut and go back to gb if you want.... but make sure you do your full wipes...
for roms,once rooted, only the type of device is specific.... type of base is not....(unless specified)
eg. you cannot flash an ics rom made for htc evo on your OB but what you can do is flash any kind of rom with any kind of base which was made specifically for OB
again, please do read...
Noobys How to Thread
Rom Installation Step By Step
--

even if i downloaded cyanogenmod 7 it didnt work for me..
i wiped all caches(dalvik, battery stats, factory reset) bt my went in bootloop during rebooting n i had to flash my firmware again..
why did dis happen??

Did you checked md5 checksum? Maybe file was corrupted.
Trolling in the deep

can you suggest any app for checking it??

Getting back to 2.3 from ICS

Hey, I wanna to get back to 2.3 from MiniCM9 (nAa) and I don't know If I should first change kernel to standard, or first ROM to 2.3. Can somebody tell me?

mati96PL said:
Hey, I wanna to get back to 2.3 from MiniCM9 (nAa) and I don't know If I should first change kernel to standard, or first ROM to 2.3. Can somebody tell me?
Click to expand...
Click to collapse
First change rom to 2.3 then flash the appropriate kernel.
I don't think it really makes a difference, just that one is slightly less risky than the other.
Sent from my E15i using Tapatalk 2

Kernel then rom, if it's rom 1st then you MIGHT have to reflash the rom anyway

Lloir said:
Kernel then rom, if it's rom 1st then you MIGHT have to reflash the rom anyway
Click to expand...
Click to collapse
No need for reflash of rom in any circumstances... point is entering flash mode to flash correct kernel is much more doable and likelier to succeed than entering a kernel embedded recovery to flash a rom.
Hence rom first, then kernel.
Sent from my E15i using Tapatalk 2

Hmm... Who to trust?
I'm curently on nAa ICS kernel and his MiniCM9, and want to get back to Achotjan Semc Debrand Engine 2.3 with nAa 11 kernel

From my experience there is no difference at all because the kernel you wanna flash has a recovery and gives you the option to flash your rom. For example when I wanted to revert back to stock without using seus I flashed the rom first and then the kernel because if I did otherwise my device would be softbricked. I hope I made my self clear. The choice is up to you. But I like flashing the kernel first;-)
Sent from my U20i using xda premium

Ok, so I tried now with kernel first -> that doesn't work, now I'm going to check with rom first

you cant build a house without foundation! flashing the kernel first is only proper way to do this!

1.put 2.3 Rom in SD
2.flash a kernel
3.on 1st boot(at kernel logo)push back button rapidly to enter cwm
4.make a full wipe and install 2.3 rom
5.done

zmuhammx said:
1.put 2.3 Rom in SD
2.flash a kernel
3.on 1st boot(at kernel logo)push back button rapidly to enter cwm
4.make a full wipe and install 2.3 rom
5.done
Click to expand...
Click to collapse
exactly right~!

It doesnt mattersjust do both no matter which first
Sent from my E15i using XDA

[ROM][Stock GB 2.3.7]Stock Apanda rom

Here's the stock Apanda rom Android GB 2.3.7. I couldn't know anything about this rom as it won't let me pass the lockscreen. Lockscreen was similar to the spice stock rom. Don't know if it is any different.
Mod : edit removed this link
I flashed it but seems like the touch screen is not compatible with Spice mi 410.
[Edit] Flash 0.35 kernel(sharp/tj) to make touchscreen work -> Thanks to Abenagiel.
This didn't seem to be any better than sharp rom.
Before flashing this rom be sure to backup your imei. Me and Demonskill had problems of unknown imei number when we flashed the rom and tried to revert back using cwm restore. My personal suggestion, before you do cwm restore make sure to flash tj's rc3. Find more info about imei backup using 5iromtoolbox take a look at post by http://forum.xda-developers.com/showpost.php?p=28096182&postcount=3. Thanks to LibertyMonger
Steps to flash this rom:
(1) Go to download mode and Flash this rom via SUT.
(2) Go to download mode and place the recovery.img from tj_style for the new kernel 0.35
(3) Place this 0.35 sharp kernel on sd card https://www.dropbox.com/s/c2myh6s2kgb9wi6/sharp_Kernel.zip
(4) Flash the zip via recovery.
Mirrors for the rom, recovery and 0.35 kernel can be found in the post. Thanks to aloklike- MOD edit: removed link
MOD EDIT : ok guys and the OP
i see a lot of problems i think for the safety of all i am closing this thread and removing the links. if everything is ok PM me and ill open this thread

yup touchscreen doesn't work..
kernel problem..
flash with sharp rom or andro-id rc3 kernel,, and touchscreen will work again..
Sent from my FIH-FB0 using xda

abenagiel said:
yup touchscreen doesn't work..
kernel problem..
flash with sharp rom or andro-id rc3 kernel,, and touchscreen will work again..
Sent from my FIH-FB0 using xda
Click to expand...
Click to collapse
Does that mean flashing 0.35 kernel will fix the touchscreen. and make the rom work i will try

nayneshdev said:
Does that mean flashing 0.35 kernel will fix the touchscreen. and make the rom work i will try
Click to expand...
Click to collapse
yup.. work for me..
Sent from my FIH-FB0 using xda

abenagiel said:
yup.. work for me..
Sent from my FIH-FB0 using xda
Click to expand...
Click to collapse
hi
sorry slightly confused r u saying if we flash RC3 or sharp and then flash this rom it will work or What

haree said:
hi
sorry slightly confused r u saying if we flash RC3 or sharp and then flash this rom it will work or What
Click to expand...
Click to collapse
not like that..
we need to replace the stock kernel with rc3 kernel or sharp kernel to make the touchscreen work..
or maybe we can replace touchscreen files with rc3 or sharp (never try this)
Sent from my FIH-FB0 using xda

abenagiel said:
not like that..
we need to replace the stock kernel with rc3 kernel or sharp kernel to make the touchscreen work..
or maybe we can replace touchscreen files with rc3 or sharp (never try this)
Sent from my FIH-FB0 using xda
Click to expand...
Click to collapse
hi
sorry still confused ok simple question
im right now on the recent kernal ie im using MatBlks CM9
now if i flash this rom will it work
Edit : got my answer on the 1st page not trying ill wait for ur new ROM

its working .....
----deleted----

the file has been deleted, can u re-upload it..
thanks

[ROM]
----deleted----

Op forgot to mention in thread title this is Stock GB 2.3.7
to Install
Flash nb0 with SUTLR
Replace recovery with CWM5.XX
flash sharp Kernel with CWM
reboot

----deleted----

aloklike said:
hey mattBLK,
which kernel are you using with this rom,how is battery life on this rom ..........
Click to expand...
Click to collapse
not sure what original name was i renamed it? i was trying to find in a separate thread but noone posted so i found this.. it has OC upto>1600Mhz and smartassV2. what is the other kernel like that was posted here?
Just noticed the subtle changes in settings with 2.3.7 with added cell broadcast

aloklike said:
uploading on mediafire ..... plz wait .....
here it is ....
Apanda 2.3.7 :: http://www.mediafire.com/?69xvxkbkdcvy6t9
recovery :: http://www.mediafire.com/?dpphpw3r8z3qhmp
kernel :: http://www.mediafire.com/?2w67p3wot3x9w3t
Steps to install :
1. put kernel zip in sdcard
2. install rom via SUT (erase user data option)
3. go to donload mode and replace recovery file
4. install kernel.zip via cwm
Click to expand...
Click to collapse
Try this also, Kernel from Abenagiel's GingerMia V1 it comes with more governor.
Hit Thanks if I help

how stable is this stock rom running on other. 35 kernels like mia and rc3?
got icv problem? or any bugs?

cheezzzz said:
how stable is this stock rom running on other. 35 kernels like mia and rc3?
got icv problem? or any bugs?
Click to expand...
Click to collapse
very stable no fc no bugs for me with the kernel im using, camera & camcorder still zooms.. just use another launcher and get rid of all the bloatware/5keyboards

Guess I will have to try this, hope it is more stable than Sharp ROM. Sharp ROM has been rebooting and just had an awful freezeup while playing a basic game. Lost sensor functionality and had to pull battery. I have no luck with any ROM really wish we had one "go-to ROM" that is fully stable.

Actually this ROM is for K41 devices, not for FB0/1/3 devices. But since K41 devices is using similiar hardware with FB0, so this ROM is still compatible with our devices
Sent from my W700

tj_style said:
Actually this ROM is for K41 devices, not for FB0/1/3 devices. But since K41 devices is using similiar hardware with FB0, so this ROM is still compatible with our devices
Sent from my W700
Click to expand...
Click to collapse
(0_0!)
wow the master was here..
there was FB1-FB3 devices??
#tumbennongolom??

tj_style said:
Actually this ROM is for K41 devices, not for FB0/1/3 devices. But since K41 devices is using similiar hardware with FB0, so this ROM is still compatible with our devices
Sent from my W700
Click to expand...
Click to collapse
after flashing this rom i am having issues with unknown imei number.so it seemed like i had lost my imei number, but after flashing rc3 i again recovered it this is the reason why i removed the link but couldnt post this information sooner then this. Those who are using this please backup your imei first using 5iromtoolbox app available on xda also on ideos x5 forum.
Sent from my Desire HD using xda app-developers app

[AUG 19] CheckROM Odin XXDLH4 - (4.1.1) [Based On 2nd Leaked JB Firmware]

Pure Stock Leaked JB Firmware
CheckROM​
There is nothing Fancy here, This is just a Rooted,Deodexed & Custom CWM5 Recovery Injected CWM Flash able Leaked Stock ROM​
ChangeLog of Leaked Firmware
Firmware info:
Code:
[LIST]
[*]Base Firmware: I9300XXDLH4 (4.1.1)
[*]Region Europe
[*]Country: United Kingdom
[*]Carrier: Unbranded
[*]Build Date: 14 August 2012
[*]Modem: XXLH1
[*]CSC: OXADLH4
[*]Change List: 41218
[/LIST]
Rom Features:
Code:
[LIST]
[*]Zipaligned
[*]Deodexed
[*]Rooted (CF SuperSU)
[*]BusyBox
[*]+ CWMManager
[*]+ Kitchen Pro
[*]+CWM5 Recovery
[/LIST]
The Main Purpose of this Base is to Give you ROOT+CWM5 and the ability to flash the firmware directly via ODIN
Dont Forget you need to follow the Instructions Given Below to get things Flashed Correctly
Things you should know before you go flashing
You can use this as a Daily driver but its no were near perfection not is it a Solid CheckROM Build
This thread will be dedicated to the release of Leaked JB Firmware Flash able via CWM and the Basic Root and CWM5 stuff
CWM app by chainfire is not working, But you can use KitcehnPro>>Browser function to flash stuff from inside the System :silly:
I have Included KitchenPro app in this rom but dont flash contents from it just yet its not been fully optimized
Leaked Firmwares can never be used to build a solid rom, these are just to test stuff and for people with ORD
Do every thing at your own risk, if you brick your device i am not responsible
Thanks to:
@SamMobile for the Leak
@Faryaab for the Thread on XDA
@CahinFire for SuperSu And CWM5 Recovery

Known Bugs:
Nothing on this yet
Flashing Instruction:
You can be on any rom
You dont need to have CWM5 and ROOT
You need to do a full wipe manually
Download ROM
Extract CheckROM_XXDLH4.tar.md5
Reboot to Recovery and do a /data wipe and and a /Cache Wipe
Then Reboot to ?Download mode and use odin to flash the ROM
After the process is over Phone Should Reboot takes 10~15min
And you will on JB 4.1.1
Reffer This Thread to know Hot to properly flash Resurrection Edition Rom >>HERE<<
Download:
CheckROM Resurrection Edition LH4 (no mirros please)
md5: 9e43689cc44c40cce32e7f95c662487b
Click to expand...
Click to collapse
If you Like my Work you can Buy me a Beer :good:

nice surprise first thing i do in the morning and what we have here..
will report back later.

First one here I guess
Sent from my A500 using xda app-developers app

is project butter working?

AWESOME!!!! Downloading...

Will try it over the weekend.​

GadgetCheck said:
Flashing Instruction:
You should be on a Samsung ROM (you canont flash this over CM9 or CM10)
You need to have CWM5 and ROOT
You need to do a full wipe manually
Download ROM
Put it in ur SD card
Reboot to Recovery and do a /data wipe and and a /Cache Wipe
Then Install Zip from SD card
After the process is over Phone Should Reboot
And you will on JB 4.1.1
Download:
Click to expand...
Click to collapse
Hi GC...if i'm on wanamlite v2.2 rom..is it consider as on Samsung ROM or have to be on original Samsung ROM?

cooldreamer said:
Hi GC...if i'm on wanamlite v2.2 rom..is it consider as on Samsung ROM or have to be on original Samsung ROM?
Click to expand...
Click to collapse
It is a Samsung ROM
u can follow the steps above

Downloading now ! Is it same like one which Faryaab's leaked jelly bean rom?
Sent from my GT-I9300 using xda premium

Wanted to know, any super brick bug ???

kachrukamble said:
Wanted to know, any super brick bug ???
Click to expand...
Click to collapse
Nope just follow the instructions i gave and flash it

GadgetCheck said:
Nope just follow the instructions i gave and flash it
Click to expand...
Click to collapse
tested, project butter not working.

Anyone tried the rom yet? Any comments or issues?

w1nter456 said:
tested, project butter not working.
Click to expand...
Click to collapse
its working

GadgetCheck said:
Nope just follow the instructions i gave and flash it
Click to expand...
Click to collapse
Thanks, Downloading......

GadgetCheck said:
its working
Click to expand...
Click to collapse
why I still felt lag/stutter? how to check if it is working?

w1nter456 said:
why I still felt lag/stutter? how to check if it is working?
Click to expand...
Click to collapse
if its based on jellybean it has Butter in it
this a beta release anyways so expect lag, its clearly given in the op

is installation not working with cmw6 ??

Mighty_X said:
is installation not working with cmw6 ??
Click to expand...
Click to collapse
you can instal via cf-recovery 1.5 aka cwm5

S2W on S-On stock ROM ?

Hi.
My power button is kind of broken and before it breaks completely, i want to enable S2W on my phone.
Its S-ON and i dont want to S-Off it. Its kind of risky i think.. I have rooted my phone successfully by HTC-dev unlocked bootloader.
Hboot: 2.02.0002
Sense: 3.6
Android: 4.0.4
I just want to get S2W functionality on my phone. I read about this here and i got choice i guess:
1) Flash a custom ROM
>> Will this work with S-ON ? I have to flash the kernel manually, right ?
2) Flash just the kernel that supports S2W
>> Is there any kernel that i can flash manually that includes S2W and works with stock ROM ?
Thanx in advance...

a.broken.star said:
Hi.
My power button is kind of broken and before it breaks completely, i want to enable S2W on my phone.
Its S-ON and i dont want to S-Off it. Its kind of risky i think.. I have rooted my phone successfully by HTC-dev unlocked bootloader.
Hboot: 2.02.0002
Sense: 3.6
Android: 4.0.4
I just want to get S2W functionality on my phone. I read about this here and i got choice i guess:
1) Flash a custom ROM
>> Will this work with S-ON ? I have to flash the kernel manually, right ?
2) Flash just the kernel that supports S2W
>> Is there any kernel that i can flash manually that includes S2W and works with stock ROM ?
Thanx in advance...
Click to expand...
Click to collapse
you can flash a kernel with s2w, but will need to follow instructions to get the kernel booting on your phone with s on. zimage injection does not work with s on
You will have to repack the kernel and flash modules, like on hox

poondog said:
you can flash a kernel with s2w, but will need to follow instructions to get the kernel booting on your phone with s on. zimage injection does not work with s on
You will have to repack the kernel and flash modules, like on hox
Click to expand...
Click to collapse
ok i flashed vipervivo ROM but battery life is pretty bad.. S2W works good..
so what happens if i restore the nandroid of original stock ROM and flash only the kernel from the ViperROM (boot.img) manually using fastboot ? how can i get modules for that ?

a.broken.star said:
ok i flashed vipervivo ROM but battery life is pretty bad.. S2W works good..
so what happens if i restore the nandroid of original stock ROM and flash only the kernel from the ViperROM (boot.img) manually using fastboot ? how can i get modules for that ?
Click to expand...
Click to collapse
Viper uses redux kernel so of you flash that it will work. There's a separate kernel thread, you can find kernel and modules in the zip. There's a full boot.img in the redux zip

Ohk.. i got it... Thanx a lot...
Sent from my HTC One X using XDA Premium 4 mobile app

Means i will restore my nandroid and will move to stock rom and the redux kernel will work with stock htc rom too..
Sent from my HTC One X using XDA Premium 4 mobile app

a.broken.star said:
Means i will restore my nandroid and will move to stock rom and the redux kernel will work with stock htc rom too..
Sent from my HTC One X using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Correct. You might need to flash the sense 3.6 version to have wifi working. sense 4 and 3.6 use different wifi drivers

poondog said:
Correct. You might need to flash the sense 3.6 version to have wifi working. sense 4 and 3.6 use different wifi drivers
Click to expand...
Click to collapse
thanx a lot... really i appreciate your help....

a.broken.star said:
thanx a lot... really i appreciate your help....
Click to expand...
Click to collapse
No problem, of you didn't have a venom signature it would be a different scenario

Yeah right... Venom rom on onex
Sent from my HTC One X using XDA Premium 4 mobile app