Hi.
My power button is kind of broken and before it breaks completely, i want to enable S2W on my phone.
Its S-ON and i dont want to S-Off it. Its kind of risky i think.. I have rooted my phone successfully by HTC-dev unlocked bootloader.
Hboot: 2.02.0002
Sense: 3.6
Android: 4.0.4
I just want to get S2W functionality on my phone. I read about this here and i got choice i guess:
1) Flash a custom ROM
>> Will this work with S-ON ? I have to flash the kernel manually, right ?
2) Flash just the kernel that supports S2W
>> Is there any kernel that i can flash manually that includes S2W and works with stock ROM ?
Thanx in advance...
a.broken.star said:
Hi.
My power button is kind of broken and before it breaks completely, i want to enable S2W on my phone.
Its S-ON and i dont want to S-Off it. Its kind of risky i think.. I have rooted my phone successfully by HTC-dev unlocked bootloader.
Hboot: 2.02.0002
Sense: 3.6
Android: 4.0.4
I just want to get S2W functionality on my phone. I read about this here and i got choice i guess:
1) Flash a custom ROM
>> Will this work with S-ON ? I have to flash the kernel manually, right ?
2) Flash just the kernel that supports S2W
>> Is there any kernel that i can flash manually that includes S2W and works with stock ROM ?
Thanx in advance...
Click to expand...
Click to collapse
you can flash a kernel with s2w, but will need to follow instructions to get the kernel booting on your phone with s on. zimage injection does not work with s on
You will have to repack the kernel and flash modules, like on hox
poondog said:
you can flash a kernel with s2w, but will need to follow instructions to get the kernel booting on your phone with s on. zimage injection does not work with s on
You will have to repack the kernel and flash modules, like on hox
Click to expand...
Click to collapse
ok i flashed vipervivo ROM but battery life is pretty bad.. S2W works good..
so what happens if i restore the nandroid of original stock ROM and flash only the kernel from the ViperROM (boot.img) manually using fastboot ? how can i get modules for that ?
a.broken.star said:
ok i flashed vipervivo ROM but battery life is pretty bad.. S2W works good..
so what happens if i restore the nandroid of original stock ROM and flash only the kernel from the ViperROM (boot.img) manually using fastboot ? how can i get modules for that ?
Click to expand...
Click to collapse
Viper uses redux kernel so of you flash that it will work. There's a separate kernel thread, you can find kernel and modules in the zip. There's a full boot.img in the redux zip
Ohk.. i got it... Thanx a lot...
Sent from my HTC One X using XDA Premium 4 mobile app
Means i will restore my nandroid and will move to stock rom and the redux kernel will work with stock htc rom too..
Sent from my HTC One X using XDA Premium 4 mobile app
a.broken.star said:
Means i will restore my nandroid and will move to stock rom and the redux kernel will work with stock htc rom too..
Sent from my HTC One X using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Correct. You might need to flash the sense 3.6 version to have wifi working. sense 4 and 3.6 use different wifi drivers
poondog said:
Correct. You might need to flash the sense 3.6 version to have wifi working. sense 4 and 3.6 use different wifi drivers
Click to expand...
Click to collapse
thanx a lot... really i appreciate your help....
a.broken.star said:
thanx a lot... really i appreciate your help....
Click to expand...
Click to collapse
No problem, of you didn't have a venom signature it would be a different scenario
Yeah right... Venom rom on onex
Sent from my HTC One X using XDA Premium 4 mobile app
Related
What is the fastest rom for X8 with stock kernel? Should also be battery saving and not ram consuming, but most important: FAST
I dont need a very good looking rom with fancy widgets and lots of functions or setting, just fast and battery saving
Cheers...
PrimeHD i think
Sent from my E15i using xda premium
PrimeHD seems to need nAa kernel and i cant unlock my bootloader....i need a rom for stock kernel and locked bl
Raex said:
PrimeHD seems to need nAa kernel and i cant unlock my bootloader....i need a rom for stock kernel and locked bl
Click to expand...
Click to collapse
For fast and battery saving , use froyo ROMS like froyobread/froyopro
Raex said:
PrimeHD seems to need nAa kernel and i cant unlock my bootloader....i need a rom for stock kernel and locked bl
Click to expand...
Click to collapse
PrimeHD for Stock Kernel is ur answer!
Find it in "All downloads" link in the 2nd post of the thread.
Sent from my Nexus S using xda premium
Thanks, i'll flash primehd tomorrow as you wrote: "there is going to be v5.4 for all kernels, I will finish up my last checkings and upload the files tomorrow."
So i dont have to flash 5.3 today and 5.4 tomorrow
Just to be sure....i just have to boot into cwm, do a full wipe and install primehds53 (or tomorrow primehds54) and then reboot and let it boot into primehd?
I'm asking this because there is a hotfix file too and somewhere i read that i have to install google apps and i dont know if the hotfix file is ment or not?!
thanks in advance........i'm really looking forward to using primehd
Cheers...
Hey, I wanna to get back to 2.3 from MiniCM9 (nAa) and I don't know If I should first change kernel to standard, or first ROM to 2.3. Can somebody tell me?
mati96PL said:
Hey, I wanna to get back to 2.3 from MiniCM9 (nAa) and I don't know If I should first change kernel to standard, or first ROM to 2.3. Can somebody tell me?
Click to expand...
Click to collapse
First change rom to 2.3 then flash the appropriate kernel.
I don't think it really makes a difference, just that one is slightly less risky than the other.
Sent from my E15i using Tapatalk 2
Kernel then rom, if it's rom 1st then you MIGHT have to reflash the rom anyway
Lloir said:
Kernel then rom, if it's rom 1st then you MIGHT have to reflash the rom anyway
Click to expand...
Click to collapse
No need for reflash of rom in any circumstances... point is entering flash mode to flash correct kernel is much more doable and likelier to succeed than entering a kernel embedded recovery to flash a rom.
Hence rom first, then kernel.
Sent from my E15i using Tapatalk 2
Hmm... Who to trust?
I'm curently on nAa ICS kernel and his MiniCM9, and want to get back to Achotjan Semc Debrand Engine 2.3 with nAa 11 kernel
From my experience there is no difference at all because the kernel you wanna flash has a recovery and gives you the option to flash your rom. For example when I wanted to revert back to stock without using seus I flashed the rom first and then the kernel because if I did otherwise my device would be softbricked. I hope I made my self clear. The choice is up to you. But I like flashing the kernel first;-)
Sent from my U20i using xda premium
Ok, so I tried now with kernel first -> that doesn't work, now I'm going to check with rom first
you cant build a house without foundation! flashing the kernel first is only proper way to do this!
1.put 2.3 Rom in SD
2.flash a kernel
3.on 1st boot(at kernel logo)push back button rapidly to enter cwm
4.make a full wipe and install 2.3 rom
5.done
zmuhammx said:
1.put 2.3 Rom in SD
2.flash a kernel
3.on 1st boot(at kernel logo)push back button rapidly to enter cwm
4.make a full wipe and install 2.3 rom
5.done
Click to expand...
Click to collapse
exactly right~!
It doesnt mattersjust do both no matter which first
Sent from my E15i using XDA
Here's the stock Apanda rom Android GB 2.3.7. I couldn't know anything about this rom as it won't let me pass the lockscreen. Lockscreen was similar to the spice stock rom. Don't know if it is any different.
Mod : edit removed this link
I flashed it but seems like the touch screen is not compatible with Spice mi 410.
[Edit] Flash 0.35 kernel(sharp/tj) to make touchscreen work -> Thanks to Abenagiel.
This didn't seem to be any better than sharp rom.
Before flashing this rom be sure to backup your imei. Me and Demonskill had problems of unknown imei number when we flashed the rom and tried to revert back using cwm restore. My personal suggestion, before you do cwm restore make sure to flash tj's rc3. Find more info about imei backup using 5iromtoolbox take a look at post by http://forum.xda-developers.com/showpost.php?p=28096182&postcount=3. Thanks to LibertyMonger
Steps to flash this rom:
(1) Go to download mode and Flash this rom via SUT.
(2) Go to download mode and place the recovery.img from tj_style for the new kernel 0.35
(3) Place this 0.35 sharp kernel on sd card https://www.dropbox.com/s/c2myh6s2kgb9wi6/sharp_Kernel.zip
(4) Flash the zip via recovery.
Mirrors for the rom, recovery and 0.35 kernel can be found in the post. Thanks to aloklike- MOD edit: removed link
MOD EDIT : ok guys and the OP
i see a lot of problems i think for the safety of all i am closing this thread and removing the links. if everything is ok PM me and ill open this thread
yup touchscreen doesn't work..
kernel problem..
flash with sharp rom or andro-id rc3 kernel,, and touchscreen will work again..
Sent from my FIH-FB0 using xda
abenagiel said:
yup touchscreen doesn't work..
kernel problem..
flash with sharp rom or andro-id rc3 kernel,, and touchscreen will work again..
Sent from my FIH-FB0 using xda
Click to expand...
Click to collapse
Does that mean flashing 0.35 kernel will fix the touchscreen. and make the rom work i will try
nayneshdev said:
Does that mean flashing 0.35 kernel will fix the touchscreen. and make the rom work i will try
Click to expand...
Click to collapse
yup.. work for me..
Sent from my FIH-FB0 using xda
abenagiel said:
yup.. work for me..
Sent from my FIH-FB0 using xda
Click to expand...
Click to collapse
hi
sorry slightly confused r u saying if we flash RC3 or sharp and then flash this rom it will work or What
haree said:
hi
sorry slightly confused r u saying if we flash RC3 or sharp and then flash this rom it will work or What
Click to expand...
Click to collapse
not like that..
we need to replace the stock kernel with rc3 kernel or sharp kernel to make the touchscreen work..
or maybe we can replace touchscreen files with rc3 or sharp (never try this)
Sent from my FIH-FB0 using xda
abenagiel said:
not like that..
we need to replace the stock kernel with rc3 kernel or sharp kernel to make the touchscreen work..
or maybe we can replace touchscreen files with rc3 or sharp (never try this)
Sent from my FIH-FB0 using xda
Click to expand...
Click to collapse
hi
sorry still confused ok simple question
im right now on the recent kernal ie im using MatBlks CM9
now if i flash this rom will it work
Edit : got my answer on the 1st page not trying ill wait for ur new ROM
its working .....
----deleted----
the file has been deleted, can u re-upload it..
thanks
[ROM]
----deleted----
Op forgot to mention in thread title this is Stock GB 2.3.7
to Install
Flash nb0 with SUTLR
Replace recovery with CWM5.XX
flash sharp Kernel with CWM
reboot
----deleted----
aloklike said:
hey mattBLK,
which kernel are you using with this rom,how is battery life on this rom ..........
Click to expand...
Click to collapse
not sure what original name was i renamed it? i was trying to find in a separate thread but noone posted so i found this.. it has OC upto>1600Mhz and smartassV2. what is the other kernel like that was posted here?
Just noticed the subtle changes in settings with 2.3.7 with added cell broadcast
aloklike said:
uploading on mediafire ..... plz wait .....
here it is ....
Apanda 2.3.7 :: http://www.mediafire.com/?69xvxkbkdcvy6t9
recovery :: http://www.mediafire.com/?dpphpw3r8z3qhmp
kernel :: http://www.mediafire.com/?2w67p3wot3x9w3t
Steps to install :
1. put kernel zip in sdcard
2. install rom via SUT (erase user data option)
3. go to donload mode and replace recovery file
4. install kernel.zip via cwm
Click to expand...
Click to collapse
Try this also, Kernel from Abenagiel's GingerMia V1 it comes with more governor.
Hit Thanks if I help
how stable is this stock rom running on other. 35 kernels like mia and rc3?
got icv problem? or any bugs?
cheezzzz said:
how stable is this stock rom running on other. 35 kernels like mia and rc3?
got icv problem? or any bugs?
Click to expand...
Click to collapse
very stable no fc no bugs for me with the kernel im using, camera & camcorder still zooms.. just use another launcher and get rid of all the bloatware/5keyboards
Guess I will have to try this, hope it is more stable than Sharp ROM. Sharp ROM has been rebooting and just had an awful freezeup while playing a basic game. Lost sensor functionality and had to pull battery. I have no luck with any ROM really wish we had one "go-to ROM" that is fully stable.
Actually this ROM is for K41 devices, not for FB0/1/3 devices. But since K41 devices is using similiar hardware with FB0, so this ROM is still compatible with our devices
Sent from my W700
tj_style said:
Actually this ROM is for K41 devices, not for FB0/1/3 devices. But since K41 devices is using similiar hardware with FB0, so this ROM is still compatible with our devices
Sent from my W700
Click to expand...
Click to collapse
(0_0!)
wow the master was here..
there was FB1-FB3 devices??
#tumbennongolom??
tj_style said:
Actually this ROM is for K41 devices, not for FB0/1/3 devices. But since K41 devices is using similiar hardware with FB0, so this ROM is still compatible with our devices
Sent from my W700
Click to expand...
Click to collapse
after flashing this rom i am having issues with unknown imei number.so it seemed like i had lost my imei number, but after flashing rc3 i again recovered it this is the reason why i removed the link but couldnt post this information sooner then this. Those who are using this please backup your imei first using 5iromtoolbox app available on xda also on ideos x5 forum.
Sent from my Desire HD using xda app-developers app
Hi, this is my first kernel, this based on the latest Ultima ICS kernel from riyal, with two minor tweaks
-now touchscreen reponse while swiping is 4px instead of 9px, so no more bumpy movements while draging items
-official "Sony Ericsson" boot logo
Information about the touchscreen problem (if you have not noticed it):
http://talk.sonymobile.com/thread/40474
the problem is present in latest FXP (but probably not in next's) and also in stock kernel ICS
The solutions was 99% done by nicklas lof, here:
http://review.cyanogenmod.com/#/c/22164/
Works in Stock ICS, 431 and 587, it should work with FXP releases too
Installation:
Flash kernel using fastboot
Flash original Riyal wifi Modules using CWM
Riyals kernel thread is here
I do not deserve any credits on this, I just moved a line in code to compile and changed logo. :good:
What is Stock ICS 538? or you mean 587
the recovery are same or did u update it too ?
I have to install the img with fastboot ... And I have everything right???
Thanks for this kernel. will give it try one of these days
New Kernel for PRO [MK16a/i]
Thanks dafsoftware :good:
So just to clarify. Everything is the same as Ultima ICS Kernel v1.4 with the changes you made for the touchscreen precision and SE-X logo. The WiFi modules to flash are also of the v1.4 too right?
I'll try this when you confirm my query, as I am running on the Stock ICS MK16a 4.1.B.0.587 (US) build. I'll try to post any issues that I come across after flashing
[email protected]
MK16a Rooted, BL Unlocked
Kernel: LuPuS-PRo-v3-LiNaRo
Stock ICS ROM .587
BB 77
[email protected] said:
Thanks dafsoftware :good:
So just to clarify. Everything is the same as Ultima ICS Kernel v1.4 with the changes you made for the touchscreen precision and SE-X logo. The WiFi modules to flash are also of the v1.4 too right?
I'll try this when you confirm my query, as I am running on the Stock ICS MK16a 4.1.B.0.587 (US) build. I'll try to post any issues that I come across after flashing
[email protected]
MK16a Rooted, BL Unlocked
Kernel: LuPuS-PRo-v3-LiNaRo
Stock ICS ROM .587
BB 77
Click to expand...
Click to collapse
You are right, this is based in Ultima ICS v1.4, in fact Riyal already has this in his sourcecode, so next's versión should already have this fix, you have to use v1.4 modules
lawong said:
the recovery are same or did u update it too ?
Click to expand...
Click to collapse
Recovery is the same
josejuangr said:
I have to install the img with fastboot ... And I have everything right???
Click to expand...
Click to collapse
After you flash the kernel you have to flash latest wifi modules from riyal, using CWM
Why now 4px? Was Gingerbread not 2px?
paul5425 said:
Why now 4px? Was Gingerbread not 2px?
Click to expand...
Click to collapse
I think GB was 2px, but with the current driver is quite hard to tap on links at 2px, I will compile one at 2px if you want to try
I use this kernel with stock ICS 587 and my phone gets freeze every time I unplug from charger and PC.
Anyone has the same problem?
Can you please update stock kernel to use this fix.
Or give some link to add recovery to stock kernel.
Thanks,
Rajesh
rajeshjamnadas said:
Can you please update stock kernel to use this fix.
Or give some link to add recovery to stock kernel.
Thanks,
Rajesh
Click to expand...
Click to collapse
This is based on latest riyal changes, I think it has voltages messed up, so I will have to build it from stock kernel someday. I dont know how to add recovery to it.
I am, but not exactly when disconnecting the charger, only when its charging and very randomly, I think the source I am using has a messed up voltage table, I need to find the original voltage tables to fix it.
dafsoftware said:
I am, but not exactly when disconnecting the charger, only when its charging and very randomly, I think the source I am using has a messed up voltage table, I need to find the original voltage tables to fix it.
Click to expand...
Click to collapse
omg so nice plzz make it bugfree and everybody will be happy! Currently using this in combi with ics Miui. Thanks alot bro for ur work!
If u need any donation or help i will be there.
hopefully u will add more things if u have the time:good::good::good::laugh:
xperiap said:
omg so nice plzz make it bugfree and everybody will be happy! Currently using this in combi with ics Miui. Thanks alot bro for ur work!
If u need any donation or help i will be there.
hopefully u will add more things if u have the time:good::good::good::laugh:
Click to expand...
Click to collapse
+1
great kernel, thanks for your work.
also flashed it with MIUI ICS, feels smoother and fast.
thanks again.
dafsoftware said:
I think GB was 2px, but with the current driver is quite hard to tap on links at 2px, I will compile one at 2px if you want to try
Click to expand...
Click to collapse
OK - after reading more it sounds like there has been some structural change to the driver model (something that needs fixed at a deeper level). Anyway, it would be great if you could additionally provide us with a ROM set at 2px just so we can see for ourselves.
Ext4
Does this kernel support the Ext4 partition? Great kernel by the way...
Edit : and.... Swap partition?
Even better than that, I notice that the Touch Move app has a "tune" mode which allows the user to tune the sensitivity themself. It's currently only compatible with a couple of GSII custom kernels:
http://tegrak2x.blogspot.co.uk/2011/10/touch-move-tune-compatible-kernels.html?m=1
It would be interesting to see if we could get Touch Move Tune working on Xperia devices too.
Sent from my MK16i using xda app-developers app
Hi All experts over here
I want to configure my incs.
Please let me knw your phones configuration i.e
ROM version,
Kernal version,
Recovery
how smooth n stable your phone is?
nik project x 4.1
xs kernel
clockworkmod 5.0.2.0
stable and evrything is working,every game works!!!!
himesh_reddy2 said:
nik project x 4.1
xs kernel
clockworkmod 5.0.2.0
stable and evrything is working,every game works!!!!
Click to expand...
Click to collapse
Brother, what will be the default kernel in project nik x
and did u flash radio as well
ROM - Stock, rooted ICS 4.04 w/ Sense 3.6
Kernel - XS-ICS 2.2
Recovery - 4EXT Touch
tpbklake said:
ROM - Stock, rooted ICS 4.04 w/ Sense 3.6
Kernel - XS-ICS 2.2
Recovery - 4EXT Touch
Click to expand...
Click to collapse
I tried flashing XS ics 2.2
but it dint work for me..
Can you let me know how do we do it..
milan.gadakari said:
I tried flashing XS ics 2.2
but it dint work for me..
Can you let me know how do we do it..
Click to expand...
Click to collapse
1. Copy .zip on your SD-card
2. Flash in recovery
3. Reboot
4. (optional) do a victory dance
WILLI120 said:
1. Copy .zip on your SD-card
2. Flash in recovery
3. Reboot
4. (optional) do a victory dance
Click to expand...
Click to collapse
my phone is unlocked using htc dev but still s on.. so this steps u shared is for s on or s off
*deleeeted*
No you can't flash kernel through recovery if you htcdev unlocked since \boot is write protected. You have to fastboot flash it. There is a guide for htcdev unlocked phones in the kernel thread
Inviato dal mio Incredible S con Tapatalk 2
sirpellinor said:
No you can't flash kernel through recovery if you htcdev unlocked since \boot is write protected. You have to fastboot flash it. There is a guide for htcdev unlocked phones in the kernel thread
Click to expand...
Click to collapse
Maan I hate this htc.dev method, it's always so complicated
-Deleted my cmt because of wrong information-
Yes it has a lot of limitations for example there's no way to flash a radio
Inviato dal mio Incredible S con Tapatalk 2