I just purchased a international Note off EBay. It has GB installed. I am not sure what country this is from but the phone's baseband version is N7000UBKK1 and the kernel version is 2.6.35.7-N7000UBKK2-CL705203. I would like to move to ICS. I need US English as the language. So:
(a) What firmware should I use? I want to use Odin to install.
(b) Is there any possibility of bricking my phone due to the eMMC issue? I have run the eMMC Check app from the Play Store and it says the chip is "insane". But the test of the memory completes without errors. I am not really sure I know what this all means but I want to avoid problems (who doesn't).
(c) I understand the brick problem is with ICS and not GB. Does this continue to be a problem with the various JB roms out there?
Thanks for your time and help.
Flash stock open German XXLRQ then, look for it in dr.ketan's thread for stock roms in note original android dev sticy.
There are no official jb roms for note yet and cm10 or aokp based custom jb roms are totally safe for wipes and all.
Sent from my GT-N7000
For people who just Dont know what version they need to install u can check this from settings -about,or simply just install kies and it will detect ur version,then u can let kies install it for u or u can download it from dr.ketan post then root it then flash any safe kernel as speedmod ir hydracore,one last thing just remember not 2 make any wipes while using stock ICS thats all.
↖(^▽^)↗ Sent from Rego Galaxy Note ↖(^▽^)↗
The brick bug only triggers on unsafe kernels like stock ICS and only if you do wipes like factory resets.
Sent from my GT-N7000 using Xparent SkyBlue Tapatalk 2
So Should I NOT Use a Stock ICS ROM?
Markuzy said:
The brick bug only triggers on unsafe kernels like stock ICS and only if you do wipes like factory resets.
Sent from my GT-N7000 using Xparent SkyBlue Tapatalk 2
Click to expand...
Click to collapse
Hello and thanks to you and the others who have so kindly replied. Does this mean I should find a non-stock ICS ROM to install? I was thinking that going stock would be safer. I was reading this guide <android.gs/update-samsung-galaxy-note-to-official-xxlrq-firmware-update> to updating to the ROM suggested above and near the end it speaks to possibly having to select ‘wipe data/ factory reset’ in recovery mode if, after the Odin install completes, the device fails to boot beyond the logo screen. I would not want to get to that point and not be able to do this if needed.
Also, I would eventually really like to get to JB - especially for the on-device voice command processing. If there is a recommended JB ROM that can do this now and avoid the brick problem, I would appreciate recommendations.
Thanks again for your knowledge and help.
whitedavidp said:
Hello and thanks to you and the others who have so kindly replied. Does this mean I should find a non-stock ICS ROM to install? I was thinking that going stock would be safer. I was reading this guide <android.gs/update-samsung-galaxy-note-to-official-xxlrq-firmware-update> to updating to the ROM suggested above and near the end it speaks to possibly having to select ‘wipe data/ factory reset’ in recovery mode if, after the Odin install completes, the device fails to boot beyond the logo screen. I would not want to get to that point and not be able to do this if needed.
Also, I would eventually really like to get to JB - especially for the on-device voice command processing. If there is a recommended JB ROM that can do this now and avoid the brick problem, I would appreciate recommendations.
Thanks again for your knowledge and help.
Click to expand...
Click to collapse
ofc you can use ICS Stock Rom. But just to be safe you have to flash safe kernel...Speedmod/Notecore/HydraCore are the safer kernels.
For JB there is no official update available from Samsung for our Note. But you can enjoy it with the efforts that developers are doing for us in XDA.
Go to Android Development Section and Have a look on the Topic Titles.Some of them are AOKP/PA/CM10/AOSP... For Me JellyCore is so far gud. You can find the link in my signatures.
I only know u r now in GB.
GB shld be ok to do full wipe. None reporting mmc brick on GB coz of full wipe.
So....
U can do ur full wipe first on stock GB.
Use pc odin to flash ICS 4.04 LRQ.
Voila.... U r on ICS alrd.
Once u r on ics, and on stock ics kernel....
Pls, do not ever do full wipe.
Unless, after that u root and install ics safe custom kernel, then u r safe to full wipe on ics.
Good luck!
Sent from my GT-N7000 at the corner of this rounded earth.
More in Jelly Core?
sahilarora2003 said:
ofc you can use ICS Stock Rom. But just to be safe you have to flash safe kernel...Speedmod/Notecore/HydraCore are the safer kernels.
For JB there is no official update available from Samsung for our Note. But you can enjoy it with the efforts that developers are doing for us in XDA.
Go to Android Development Section and Have a look on the Topic Titles.Some of them are AOKP/PA/CM10/AOSP... For Me JellyCore is so far gud. You can find the link in my signatures.
Click to expand...
Click to collapse
Hello and thanks. I guess it may make sense to bypass the stock ICS which seems to contain issues related to the brick bug and go to something like Jelly Core as you mention. I looked at the page for Jelly Core and see that it says to install using Clock Work Mod and to wipe from a safe kernel first. As a newbie I guess I have some questions:
(a) I am on GB which I understand to be "safe". Is that correct?
(b) Where do I get the CWM for this phone and how do I install it?
(c) To do the "wipe" does that simply mean to use the built-in reset to factory or does this mean something else?
Thanks
Hi there,
a. Yes, Stock GB's are generally safe
b. When your going to flash ROM, each ROM has it's own accompanying CWM.. so when your done choosing which ROM your going to flash your Note to, when your going to bootup in recovery.. and you get the standard CWMR...
c. Yes, Wiping is synonymous to doing the built-in factory reset on your phone (thru Settings), or the alternate way is to go to CWMR and wipe data. Different Methods, same result.
Thanks but...
letters_to_cleo said:
Hi there,
a. Yes, Stock GB's are generally safe
b. When your going to flash ROM, each ROM has it's own accompanying CWM.. so when your done choosing which ROM your going to flash your Note to, when your going to bootup in recovery.. and you get the standard CWMR...
c. Yes, Wiping is synonymous to doing the built-in factory reset on your phone (thru Settings), or the alternate way is to go to CWMR and wipe data. Different Methods, same result.
Click to expand...
Click to collapse
I am sorry but I am still a bit lost here. Before my N7000 I had a Samsung Skyrocket and flashed it using Odin from the GB that was on it to the stock ICS. I found several guides for this online and it worked fine and easily (although I still feared the brickbug). But this is basically all I know about this stuff.
So how do I flash something like Jelly Core? It sounds like I have to install some other was other than I did with Odin/stock ICS on my Skyrocket. Perhaps I need more of a tutorial on how to do this flashing of custom roms. Any suggestions?
I apologize to all for my thick-headedness.
the best and safest way first is to downgrade back to stock GB. Don't do any thing foolish by just flashing a stock ICS (with an unsafe kernel).
Downgrade first to stock GB and work your way up to eventually flash your preferred custom ROM (in cwmr or odin)
Related
plz what ics leak mean ? i am new to android world
what is the difference between ics leak and repack and stock and other expressions?
what is the difference between kernel and firmware expression ?
give me example ( stuuner and canyon and lpy and lpf and gb )...
i asked this noob question as i am noob at flashing and i read alot about bricks and emmc bug for leak and repack ICS
now i am using lpf rooted ics + supersu
Ics leak is when the ice cream in the ice cream sandwich is almost melted and starting to leak. In all seriousness a leak is when a company accidentally loses a firmware version for a phone and it goes public.
Sent from my Nexus S 4G using XDA
sehooo said:
plz what ics leak mean ? i am new to android world
what is the difference between ics leak and repack and stock and other expressions?
what is the difference between kernel and firmware expression ?
give me example ( stuuner and canyon and lpy and lpf and gb )...
i asked this noob question as i am noob at flashing and i read alot about bricks and emmc bug for leak and repack ICS
now i am using lpf rooted ics + supersu
Click to expand...
Click to collapse
The first ICS Roms for Note were buit on a DANGEROUS Kernel which came from a "leak". That kernel was responsible for bricking many devices due to its eMMC bug.
Now all the new ICS Roms are "fixed" by using new Kernels, but the problem continues if you go from an old rom (leak kernel) to a new one. There is a specific way to do it. You can read all about it in many threads.
If you tell me which Rom you want to flash and on which Rom you currently use i can give you more detailes!
Hope i could help!
sotiris20 said:
The first ICS Roms for Note were buit on a DANGEROUS Kernel which came from a "leak". That kernel was responsible for bricking many devices due to its eMMC bug.
Now all the new ICS Roms are "fixed" by using new Kernels, but the problem continues if you go from an old rom (leak kernel) to a new one. There is a specific way to do it. You can read all about it in many threads.
If you tell me which Rom you want to flash and on which Rom you currently use i can give you more detailes!
Hope i could help!
Click to expand...
Click to collapse
PLEASE HELP ME TOO! now i am currently on RocketICS rom but my note keep restarting every 30 sec... RocketICS rom was the first rom i flashed after i rooted my new note. Is there anyway to get rid of the bootloop? i really like the rocketICS rom but i cant use it at all if it keeps restarting. Before i flash the rocketics rom, my note was N7000DXLC2.
Please direct me how to remove the bootloop. i really want to use the RocketIcs rom.
myemintun said:
PLEASE HELP ME TOO! now i am currently on RocketICS rom but my note keep restarting every 30 sec... RocketICS rom was the first rom i flashed after i rooted my new note. Is there anyway to get rid of the bootloop? i really like the rocketICS rom but i cant use it at all if it keeps restarting. Before i flash the rocketics rom, my note was N7000DXLC2.
Please direct me how to remove the bootloop. i really want to use the RocketIcs rom.
Click to expand...
Click to collapse
You have already started a thread about your issue. Posting about the same thing in different threads is called spamming, and is against the XDA rules. So, don't do it.
chasmodo said:
You have already started a thread about your issue. Posting about the same thing in different threads is called spamming, and is against the XDA rules. So, don't do it.
Click to expand...
Click to collapse
Okkay sorry i dint know that is called spamming. But i am really nervous and scared now my parents will kill me if my note brick. If u know the soultion or any link please help me. i am really thankful.
myemintun said:
Okkay sorry i dint know that is called spamming. But i am really nervous and scared now my parents will kill me if my note brick. If u know the soultion or any link please help me. i am really thankful.
Click to expand...
Click to collapse
You can at least post link to other thread with comment moved comment to seperate thread.
Do a flash back to stock gb throught pc odin, perform data factory reset through dialer, google for code ending something like 3855.
Root it and put cf kernel on it, perform factory reset from recovery, wipe caches and dalvik cache. Then reinstall rocket by flashing the zip in recovery.
After this do not recover apps just redownload from playstore. Do it one by one so you can eliminate which one is responsible. If thats case.
You loose data but also lingering crap from past that can cause fc an reboot. Now you can best disable keep device backup in Google cloud.
Last read all post in rocket thread. Should it return, there areprobably others with same problem. Check their fixes lmao
Sent from my GT-N7000 using Tapatalk 2
baz77 said:
You can at least post link to other thread with comment moved comment to seperate thread.
Do a flash back to stock gb throught pc odin, perform data factory reset through dialer, google for code ending something like 3855.
Root it and put cf kernel on it, perform factory reset from recovery, wipe caches and dalvik cache. Then reinstall rocket by flashing the zip in recovery.
After this do not recover apps just redownload from playstore. Do it one by one so you can eliminate which one is responsible. If thats case.
You loose data but also lingering crap from past that can cause fc an reboot. Now you can best disable keep device backup in Google cloud.
Last read all post in rocket thread. Should it return, there areprobably others with same problem. Check their fixes lmao
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
thanks bro.. even though i dont get what u mean ;( can u teach me how to flash a lpy stock rom from my current state?
Ok go to first post in this thread http://forum.xda-developers.com/showthread.php?t=1424997
All should become clear reading this thread. Its a sticky in developement with sceenshots on how to install. From development you can also find cf root.
Recap
Download odin, shut down kies and start it on pc.
Download your rom of choice, unzip it.
Turn phone off, turn on and push volume down, home key and buttun at same time, it should go to download mode, Its tricky, may need couple tries.
dont wait to long, connect to pc, watch added in odin, select extracted tar. Md5 file, the largest, put in pda, no repartition no clear efs.
Press volume button up to initiate download mode and select start on odin, if your download was ok, it should flash and show pass on odin.
If I were you I would dl gb rom, because from gb rom the samsung factory reset I mentioned earlier is safe. Usually this fixes bootloop itself, however on ics rom, custom, leak or official this is not safe. (except cm9 with xplodwild kernel)
Sent from my GT-N7000 using Tapatalk 2
Deleted
Hello.
I got a GNote International version today and it came with ICS already installed.
I have my basic share of experience on Rooting and Flashing CWM and ROMS on some WiFi-Only Samsung devices, but after 6 or 7 hours of reading different posts and guides, I still cannot understand some things.
I already Rooted my GNote, but CWM disappeared, which I see is normal.
My Main question is, coming from a Stock ICS ROM and Kernel, what in the world should I do to safely flash AOKP Build 38 and retain CWM?.
My current Android version is 4.0.3
Baseband: N7000XXLPT
Kernel: 3.0.15-N7000XXLPY-CL474507
I see I can't flash Franco's Kernel and then use AOKP, so that's out of the question.
What ROMs I can flash if I first install Abyss kernel v4.2?.
What is a binary counter?
I'm really lost here, and I don't want to brick my device, so please help me out with some answers.
Thank you in advance.
Which ROM do you want to flash?
I recommend you to play with you're device for sometime until you understand everything beneath it.
After that decide which ROM you want to flash.... than stick with that ROMs installation instructions.
Download everything you need before flashing...
Before flashing custom ROMs you need to flash Stock GB first .
Stock ICS is not safe for all this things.
If you want to stay safe in stock ICS than don't perform Data wipe/factory reset...
Flash a safe kernel like Hardcore Speedmod...
Here is the link
http://forum.xda-developers.com/showthread.php?t=1673072
And Most important don't forget to press THANKS for anyone who is trying to help...
I appreciate your help.
I would like to flash Kang's AOKP.
Flashing stock GB first is what's I didn't know.
Sent from my YP-G70
chintamanijaipuri said:
Which ROM do you want to flash?
I recommend you to play with you're device for sometime until you understand everything beneath it.
After that decide which ROM you want to flash.... than stick with that ROMs installation instructions.
Download everything you need before flashing...
Before flashing custom ROMs you need to flash Stock GB first .
Stock ICS is not safe for all this things.
If you want to stay safe in stock ICS than don't perform Data wipe/factory reset...
Flash a safe kernel like Hardcore Speedmod...
Here is the link
http://forum.xda-developers.com/showthread.php?t=1673072
And Most important don't forget to press THANKS for anyone who is trying to help...
Click to expand...
Click to collapse
Please, let me know if what I'm understanding is correct.
In order to flash anything safely, I need to go back to a Stock Gingerbread ROM.
Once there, I can flash kernels and ICS custom ROMs.
The following thread shows stock GB ROMs, but which one should I download if I got my GNote on the US with ICS preloaded:
http://forum.xda-developers.com/showthread.php?t=1424997
Thank you.
You can flash pretty much any stock gingerbread rom using pc odin. However, there have been some bricks doing this, so I strongly suggest to wait until samsung releases a patch (http://forum.xda-developers.com/showthread.php?t=1698977). Now, if you want to flash a gb rom anyway, be sure that you don't wipe while being on an ics kernel.
oscarsalgar said:
You can flash pretty much any stock gingerbread rom using pc odin. However, there have been some bricks doing this, so I strongly suggest to wait until samsung releases a patch (http://forum.xda-developers.com/showthread.php?t=1698977). Now, if you want to flash a gb rom anyway, be sure that you don't wipe while being on an ics kernel.
Click to expand...
Click to collapse
I did Factory Resets a couple of times already inside ICS with no problems, so I'm guessing that doing a Wipe from Stock Recovery is what causes a hardbrick, right?
As far as I've read, any erase command could trigger the emmc bug. I'm not an expert though, but I guess a factory reset from settings could be as dangerous as a factory reset in stock recovery
oscarsalgar said:
As far as I've read, any erase command could trigger the emmc bug. I'm not an expert though, but I guess a factory reset from settings could be as dangerous as a factory reset in stock recovery
Click to expand...
Click to collapse
I better wait for a official fix then. This damn phone cost me an arm and a leg.
Muchas gracias por su apoyo, lo aprecio mucho.
SirRhor said:
I better wait for a official fix then. This damn phone cost me an arm and a leg.
Muchas gracias por su apoyo, lo aprecio mucho.
Click to expand...
Click to collapse
The Stock interface is so freaking ugly, that it's better not to wait till the OFFICIAL FIX.
Even if they do that, the interface would still be ugly.
Just follow the safe steps which don't even imply adding triangle:
1)flash the rooted GB (by bovias) (you will find the link inside below link, follow the instructions from there, flash with PC odin)
2)Then CWM via mobile(!!!) odin
follow the first part from here:
http://forum.xda-developers.com/show....php?t=1659768
3)And then go to C9 Nightlies thread in General and flash it, it looks so beautiful and accurate and has so many features, has secure kernel and is 4.0.4
*Please read carefully the instructions from the above mentioned 2 threads before flashing anything and you can be sure that everythin will be non-risky and smooth
It's great
klukiyan said:
The Stock interface is so freaking ugly, that it's better not to wait till the OFFICIAL FIX.
Even if they do that, the interface would still be ugly.
Just follow the safe steps which don't even imply adding triangle:
1)flash the rooted GB (by bovias) (you will find the link inside below link, follow the instructions from there, flash with PC odin)
2)Then CWM via mobile(!!!) odin
follow the first part from here:
http://forum.xda-developers.com/show....php?t=1659768
3)And then go to C9 Nightlies thread in General and flash it, it looks so beautiful and accurate and has so many features, has secure kernel and is 4.0.4
*Please read carefully the instructions from the above mentioned 2 threads before flashing anything and you can be sure that everythin will be non-risky and smooth
It's great
Click to expand...
Click to collapse
Thank you for the info. I already flashed custom ROMs. It was a pain to do it with all the risk involved.
So far I tried LiquidSmooth 2.2 and KingDroid 3.
Now I would like to see how I can install Kang's AOKP.
I've been lucky so far, no issues until today.
I appreciate your support.
Sent from my YP-G70
i own a galaxy note GT-N7000..my first sammy device. i have been waiting for what seems like an eternity for an official update here in SOUTH AFRICA. so i looked around the web for ways of updating safely and easily cause im a noob at this really. well, i found this http://www.theandroidsoul.com/xxlpy/
but then i also found a warning about flashing this ROM...
my question now is: how can i get ICS without rooting my phone and without bricking it? has the soultion been found to this eMMC bug?
and if i follow instructions on the link provided, will i be prompted to updated when sammy finally gets around to giving me an OTA?
how do i enjoy ICS without worrying about something being slowly corroded in my phone...
help
blacque said:
i own a galaxy note GT-N7000..my first sammy device. i have been waiting for what seems like an eternity for an official update here in SOUTH AFRICA. so i looked around the web for ways of updating safely and easily cause im a noob at this really. well, i found this http://www.theandroidsoul.com/xxlpy/
but then i also found a warning about flashing this ROM...
my question now is: how can i get ICS without rooting my phone and without bricking it? has the soultion been found to this eMMC bug?
and if i follow instructions on the link provided, will i be prompted to updated when sammy finally gets around to giving me an OTA?
how do i enjoy ICS without worrying about something being slowly corroded in my phone...
help
Click to expand...
Click to collapse
If you follow that instructions you will be fine as long after flashing dont factory reset or recovery data wipe. The only solution to be safe is to have safe ics kernel like speedmod k3-3 or franco r3,r4,r5& r6.
jonpaslim said:
If you follow that instructions you will be fine as long after flashing dont factory reset or recovery data wipe. The only solution to be safe is to have safe ics kernel like speedmod k3-3 or franco r3,r4,r5& r6.
Click to expand...
Click to collapse
will flashing that kernel mean i will no longer be able to get updates from samsung?
and how do i flash that kernel whilst following the instructions on the link and staying un rooted
blacque said:
will flashing that kernel mean i will no longer be able to get updates from samsung?
and how do i flash that kernel whilst following the instructions on the link and staying rooted...
Click to expand...
Click to collapse
Yes you will no longer get an update. You can always use the pc odin to update dont worry.
If you follow those instruction you will loose your root but you can always get rooted if you flash speedmod k3-3.
Sorry, if you follow those instruction you will remain unrooted.
if i flash the xxlpy rom and then after i get ics flash the lc1 gingerbread, will that be fine? will i get to keep ics while running it on the gingerbread firmware?
blacque said:
if i flash the xxlpy rom and then after i get ics flash the lc1 gingerbread, will that be fine? will i get to keep ics while running it on the gingerbread firmware?
Click to expand...
Click to collapse
If you flash ics your in ics. If flash gb your in gb. There is no dual boot.
Sorry going to bed. Just follow the instruction you'll be fine. If your not sure, just remain in gb, you will get better batery life compare to ics.
ok thanks...battery life is important...oh well i just thought maybe i could run the ics rom but have a safe firmware...
one more question , kies asks me to update my firmware, will updating to the latest firmware which i assume is lc1 , will updating delete all my game data files?
All stock ics is no wipe, it will not delete your data.
If an update im sure it is ice cream sandwich android, if its not then i dont know its a wipe or no wipe but if its a wipe then it will delete all your data better back it up if i were you.
if its not then i dont know its a wipe or no wipe but if its a wipe then it will delete all your data better back it up if i were you.[/QUOTE said:
How do I back it up...lies does not back apps...and I'm not rooted, can't use titanium back up...any other app that will do a good job?
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Hi, I have an international varient of the Galaxy Note GT N7000 which using Chainfire's Got Brick App v1.1 says:
eMMC Chip
Type: VYL00M
Revision: 0x19
Verdict: Danger! This eMMC chip is "Known" to have the brick bug!
I once had installed a custom Kingdroid ROM v3 and wiped it but it had resulted in a Hardbrick/Superbrick so i had to take it Samsung Service Center to get it fixed. They have repaired it and given me back the handset with the Stock ICS ROM. Here are the details:
Model Number: GT-N7000
Android Version: 4.0.3
Baseband Version: N7000XXLPT
Kernel Version: 3.0.15-N7000JPLPD-CL643396
[email protected]#3
SMP PREEMPT Thu May 31...
Build Number: IM74K.JPLPD
Now i have done some researched and found that this bug is only triggered with kernels (ICS stock & leaked) which have the eMMC_Erase function/command. GB kernels are not known to have this erase function so they are safe.. Also the two safe kernels are franco r3 and speedmod k3 (Correct me if im wrong). Can anyone please guide me on the following:
1) Should I flash Stock Gingerbread OR ICS Kernel(franco/speedmod)?
2) Should I use Recover or ODIN?
3) Plz Provide the links for the Kernels - Franco R3 & Speedmod K3 which are safe?
4) Will the above Kernels provide root access?
5) Is abyss kernel safe (because it supports GPU overclock)?
6) Can i flash an ICS kernel over a Gingerbread ROM?
For answering please answer in a similar numbered way so that it is easy to read and understand for me as well as future audience! Thanking everyone who takes time to read and answer!
I use Speedmod kernel and i confirm that it is safe (for me at least anyway) Im using CleaNote ICS ROM, So I would suggest you also use speedmod kernel,
You Flash it in Odin, It will give you CWM and Root too !
Ive attached the kernel to the post for you.
Abyss kernel is safe, But its for GB ROMs only, You are on ICS so it wont work.
I dont know if you can flash ICS kernel over GB ROM, However, Your are on ICS so you shouldnt need to worry about that.
don't really want to hijack your thread an i dont really want to make a whole new thread for a simple question.
as a noob, im just wanting to know, if i update my stock gb to stock ics via software update, are there still chances of this emmc bug/brick thats going on?
and the battery drain issues, do they only exist in custom roms or does it exist in stock roms too?
cheers.
azzledazzle said:
I use Speedmod kernel and i confirm that it is safe (for me at least anyway) Im using CleaNote ICS ROM, So I would suggest you also use speedmod kernel,
Click to expand...
Click to collapse
Thanks for the confirmation mate, one more thing to ask you: Is the speedmod kernel faster than the stock ICS kernel? Is there any flaws such as battery drain/WIFI problem with it? Also does it support GPU OC? Thanks once again for your help!
little-vince said:
don't really want to hijack your thread an i dont really want to make a whole new thread for a simple question.
as a noob, im just wanting to know, if i update my stock gb to stock ics via software update, are there still chances of this emmc bug/brick thats going on?
and the battery drain issues, do they only exist in custom roms or does it exist in stock roms too?
cheers.
Click to expand...
Click to collapse
Firstly get your Galaxy Note checked using Chainfires App (Gotbrick v1.1). If the verdict says "Danger" only then does your device have this problem. My Galaxy Note (Rev 0x19) had this problem and came with GB out of the box and i upgraded it to ICS through Samsung Kies and it worked fine. So i do not think that while updating to ICS via Kies will cause this problem. As of what i know it is triggered when a command eMMC errase is triggered when either doing a factory reset or wipe through recovery. The update as such did not brick my device, however this does not mean it cannot brick yours. I am no expert on this so be a little cautious while updating. I would suggest stick to GB until Samsung Releases a safe stock ICS ROM with a safe Kernel. Cheers!
really easy
1: (optional ) in GB do factory reset (after you have made a backup with TB)
2: put phone in Download mode.
3: use PC odin flash STOCK ICS rom
4: reboot device let it load
5: put device back into download mode
6: use PC ODIN flash Speedmod k3-3
7: reboot
8: launch CWM and tell it to reboot in cwm recovery
9: load your custom rom of your choice
i HIGHLY recommend doing ONLY THE FACTORY RESET WIPE data and cache in GB before you start anything.
ONCE you are in ICS and have successfully loaded speedmod or franco's kernel then it is safe to do a factory wipe if you want. but ONLY after one of those 2 Kernels are on your device.
EMMC BUG. is affected in all N7000 Devices only . only the devices sent to the USA have the revision the non 0x19 bug .
rp4k said:
EMMC BUG. is affected in all N7000 Devices only . only the devices sent to the USA have the revision the non 0x19 bug .
Click to expand...
Click to collapse
okay...
truth is i haven't actually bought the note yet.
just doing substantial amounts of research beforehand.
im pretty sure only the n7000 model is out in australia.
but it's all okay if i dont factory reset/wipe/anything-risky-in-general right?
little-vince said:
okay...
truth is i haven't actually bought the note yet.
just doing substantial amounts of research beforehand.
im pretty sure only the n7000 model is out in australia.
but it's all okay if i dont factory reset/wipe/anything-risky-in-general right?
Click to expand...
Click to collapse
Yes, this bug is known to trigger usually when you do a wipe using the recovery. However there have been some cases when doing a factory reset via the settings has also resulted in a brick. However if you stay away from recovery and do not intend to doing flashing/wipes then i guess you should be ok. And it is a matter of time before Samsung Comes up with a solution. They are said to be working on this bug already. I have the N7000 which i bricked once while flashing and then wiping but i got it repaired since i had warranty. Since then i have stayed away from wiping or installing any custom roms so the device has not given any problems. Hope this info helps! Cheers!
Rom doesnt load during boot
Dear Developers
I rooted my galaxy note and soon as that i got gained super user access for chain fire app, then i flashed CWM and installed crisello rom with abbysys kernel , it installed all the files correctly and soon after that the phone rebooted .After reboot the phone went inside the boot menu ( the world of galaxy UI boot menu ) and it frozen since then
i tired flashing various custom or stock roms and still the same problem i face
If someone could help me out on what the problem is and how i could get a fix to it
cuteglen said:
Dear Developers
I rooted my galaxy note and soon as that i got gained super user access for chain fire app, then i flashed CWM and installed crisello rom with abbysys kernel , it installed all the files correctly and soon after that the phone rebooted .After reboot the phone went inside the boot menu ( the world of galaxy UI boot menu ) and it frozen since then
i tired flashing various custom or stock roms and still the same problem i face
If someone could help me out on what the problem is and how i could get a fix to it
Click to expand...
Click to collapse
What rom are you on? Have you performed any wipes or factory resets?
Sent from my GT-N7000 using xda premium
Hi everybody
I have three questions if You can help me
1- Are speedmode and franco Kernels the only safe kernels for stock ICS?
2- Can I flash CM9 from stock ICS or it is safer to do it from GB rom?
3- Can I flash CM9 kernel for stock rom?
Thanx in advance
iraqi4ever80 said:
Hi everybody
I have three questions if You can help me
1- Are speedmode and franco Kernels the only safe kernels for stock ICS?
2- Can I flash CM9 from stock ICS or it is safer to do it from GB rom?
3- Can I flash CM9 kernel for stock rom?
Thanx in advance
Click to expand...
Click to collapse
1. Afaik yes
2. NO, you'll brick, flash from GB kernel, I know some have done from abyss.
3. No. CM based not compatible with Touchwiz framework.
Sent from my GT-N7000 using xda premium
I have a quick ( hopefully) question about the brick bug. I already asked but I think a mod must have deleted the whole thread, even though the thread was about the brick bug and I think I might have been bringing a new way ( well for some anyway) to flash safely to new ROMs.
So anyway, I have a 'safe' kernel ( speedmod), and I want to try out 4.0.4 stock ROM. I have extracted the stock ROM zip and the tar file inside. In there is the Zimage.
Do I just delete the Zimage then re-zip and flash from CWM?
OR Do I have to replace the Zimage with another, 'safe', Zimage ( for example just put the zimage in there from speedmod because I want to keep that for now). Does there NEED to be A Zimage there, or will it work fine without one. I don't want to start flashing the ROM and it get stuck half way through.
If it will work this way then this might be a fairly easy way for anybody to flash any new ROM they want. They'll just need to get a safe kernel on there in the first place.
SpyderTracks said:
1. Afaik yes
2. NO, you'll brick, flash from GB kernel, I know some have done from abyss.
3. No. CM based not compatible with Touchwiz framework.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
thank you for your response
just to be sure you said that it is unsafe to flash CM9 from stock ICS?
can we flash CM9 from stock ICS rom with safe kernel such as franco or speedmod
sorry for bothering you and thank you again
iraqi4ever80 said:
thank you for your response
just to be sure you said that it is unsafe to flash CM9 from stock ICS?
can we flash CM9 from stock ICS rom with safe kernel such as franco or speedmod
sorry for bothering you and thank you again
Click to expand...
Click to collapse
Only from GB kernel such as abyss. If you flash from ics kernel you WILL brick. This goes for all cm based roms.
Sent from my GT-N7000 using xda premium
kyllerbuzcut said:
I have a quick ( hopefully) question about the brick bug. I already asked but I think a mod must have deleted the whole thread, even though the thread was about the brick bug and I think I might have been bringing a new way ( well for some anyway) to flash safely to new ROMs.
So anyway, I have a 'safe' kernel ( speedmod), and I want to try out 4.0.4 stock ROM. I have extracted the stock ROM zip and the tar file inside. In there is the Zimage.
Do I just delete the Zimage then re-zip and flash from CWM?
OR Do I have to replace the Zimage with another, 'safe', Zimage ( for example just put the zimage in there from speedmod because I want to keep that for now). Does there NEED to be A Zimage there, or will it work fine without one. I don't want to start flashing the ROM and it get stuck half way through.
If it will work this way then this might be a fairly easy way for anybody to flash any new ROM they want. They'll just need to get a safe kernel on there in the first place.
Click to expand...
Click to collapse
Hiya, yep, you can just delete the zimage file, no need to replace, it will just skip writing that partition.
Sent from my GT-N7000 using xda premium
Gave that a go last night and I must not be doing something right. Either I need to re-zip it differently or I need to use something other than CWM (mobile odin?) because it's just aborting before it actually starts flashing anything.
Suppose I could always flash the separate elements on pc odin?
kyllerbuzcut said:
Gave that a go last night and I must not be doing something right. Either I need to re-zip it differently or I need to use something other than CWM (mobile odin?) because it's just aborting before it actually starts flashing anything.
Suppose I could always flash the separate elements on pc odin?
Click to expand...
Click to collapse
Try mobile odin. If you point to the tar, it should load all the components. You can then review which components are being flashed.
Sent from my GT-N7000 using xda premium
iraqi4ever80 said:
Hi everybody
I have three questions if You can help me
1- Are speedmode and franco Kernels the only safe kernels for stock ICS?
2- Can I flash CM9 from stock ICS or it is safer to do it from GB rom?
3- Can I flash CM9 kernel for stock rom?
Thanx in advance
Click to expand...
Click to collapse
1. Add goku, dafuq, gl-notecore and abyss42 (GB) to your list.
2. Only do it from a GB firmware or at least a GB kernel like abyss42. SPECIFIC instructions per firmware is listed for a reason. Follow those instructions to the letter.
3. No.
Sent from my GT-N7000 using xda app-developers app
kyllerbuzcut said:
Gave that a go last night and I must not be doing something right. Either I need to re-zip it differently or I need to use something other than CWM (mobile odin?) because it's just aborting before it actually starts flashing anything.
Suppose I could always flash the separate elements on pc odin?
Click to expand...
Click to collapse
Stock rom in a zip? Are you sure you are nit flashing a custom rom? Point us to the file/thread please.
If it is a custom rom, the it is meant to be via CWM.
1. Flash abyss42
2. Reboot recovery
3. Do your wipes
4. Flash.
Im sure there is a specific instruction on where you got that file. Or better yet, go to dr. Ketans thread and get your stock rom from there.
Sent from my GT-N7000 using xda app-developers app
It's just the standard rom file from sammobile.It does come as a zip you know. If you unzip it, then use rar on it you can see all the bits. I thought if I just put a different zimage in there it would just go ahead and use that, but didn't seem to like it after I zipped it all back up again.
Tonight I've ended up getting chainfires excellent CF-Root kernel.Flashed that through odin, over my speedmod kernel.
Put just the factoryfs part of the stock rom zip onto the SD card and flashed that using the cwm app that CF-Root installs for you.. Now have CF-Root kernel and 4.0.4 firmware.
If you don't already have a "safe" kernel then I dunno what the brick chances would be, but since I had a safe one already I thought it couldn't hurt to try it out.
The reason I haven't flashed the hidden, cache, model and sbl parts of the zip is that simply they wouldn't fit on my SD card If it behaves funny or I can make space then I'll try the rest too. And the reason I didn't flash the zimage from the zip should be fairly obvious. Because I don't want a brick
EDIT: I managed to clear some space on the SD and flashed the rest of it. Seems to be working ok, so far anyway. I'm hoping the battery issues from 4.0.3 will be a little better. This is a really good way of doing it all as you can just swap out a potentially bad kernel for one that has been 'protected' by having te emmc cap erase turned off.
Hi Guys,
I wondered if any of you (more experienced, long serving) users are aware of any Gingerbread ROMs? Preferably a CM or any 2.3.7 based, but if they don't exist, any build will do... It needs to be a safe build, a non eMMC bug version, or DeOxed (is that the term)?
Sure, you're gonna say, why bother.. There's JB and KK now, but I like GB and wanted to see what it's like on the N7000?
All help gratefully welcomed..
Thanks, Lister
all GB kernels are safe to wipe data (only stock ICS kernel is unsafe)
i advise you to try Checkrom HD v6, still my favorite GB rom
Sent from my GT-N7000 using xda premium
Hi @ASMI1,
Thanks for such a fast reply.. I've been to the main website where I can download it.. One thing I'm worried about, I've seen in this ROM and mentioned in another GB based ROM for our phones is: CSC?
the CheckRom v6 features "Multi CSC" what does this mean, and is it dangerous?
Do I flash Philz Kernel, and install with that? Do I need to flash another kernel afterwards? Does this room raise the counter or anything?
I'm OK flashing JB or KK, but not done a GB ROM and worried in case summit not aware of, don't want to brick this...?
Thanks, Lister
ASMI1 said:
all GB kernels are safe to wipe data (only stock ICS kernel is unsafe)
i advise you to try Checkrom HD v6, still my favorite GB rom
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
CSC means customer service code. Multi csc means that this rom is not locked to any country or carrier.
Yes you can flag it under philz kernel.
Sent from my LG-E410
Hi @kaborayyan / @ASMI1 / Guys,
I've flashed Philz original Recovery/Kernel first, and then do all the usual wipes... Factory Reset, System, Davlik Cache (and even tried Pre-Load? after first failed) and same result each time.
During the flashing process it seems to backup the EFS (even though that was the first thing I did when I got this phone, so hope it hasnt over written my original EFS backup) but then gets stuck. It seems to stay on Flashing Modem for ages, and progress bar doesnt move... And then the phone goes black, and it reboots... But then gets stuck on the white Samsung splash screen "Samsung Galaxy Note - GT-N7000" and stays like that, unless I reboot....
I reboot, but notice CWM 5.0.2.7 is installed (not sure if thats a safe one?) so I flash Philz from within that, reboot recovery and then do all the wipes again... and the phone seems like normal again. However I dont know if I've done anything wrong, or if the phone is still safe or if I've killed it any way??? lol
Cheers for any help/support.
Thanks, Lister
Lister Of Smeg said:
Hi @kaborayyan / @ASMI1 / Guys,
I've flashed Philz original Recovery/Kernel first, and then do all the usual wipes... Factory Reset, System, Davlik Cache (and even tried Pre-Load? after first failed) and same result each time.
During the flashing process it seems to backup the EFS (even though that was the first thing I did when I got this phone, so hope it hasnt over written my original EFS backup) but then gets stuck. It seems to stay on Flashing Modem for ages, and progress bar doesnt move... And then the phone goes black, and it reboots... But then gets stuck on the white Samsung splash screen "Samsung Galaxy Note - GT-N7000" and stays like that, unless I reboot....
I reboot, but notice CWM 5.0.2.7 is installed (not sure if thats a safe one?) so I flash Philz from within that, reboot recovery and then do all the wipes again... and the phone seems like normal again. However I dont know if I've done anything wrong, or if the phone is still safe or if I've killed it any way??? lol
Cheers for any help/support.
Thanks, Lister
Click to expand...
Click to collapse
Reboot into recovery again if you found the touch colored recovery then you're on philz kernel. If not be sure that you selected the suitable philz kernel.
If I helped hit the thanks button.
Hi @kaborayyan,
Yep, I'm certainly on Philz Kernel.... when it's loaded, its kind of a pink/purple-ish colour.... (not sure what version, but something like 5.1.1.1) It's the first one I downloaded when I got this phone a couple of months back, that I used to root/and then flash custom roms with... (namely, JB).
However, I fancy seeing what GB is like on it, but get stuck... it seems to hang on Flashing Modem, sits there, and then reboots without finishing by the looks of things...?
Its a UK Vodafone, N7000
Thanks, Lister
Did you try to flash a stock GB ROM through Odin? May be you get better results. Then root it and flash whatever you want of custom GB based Roms.
Sent from my GT-N7000
yeah like kaborayyan said, try to flash any stock GB rom using odin3 v1.85 only (you can find instructions and download links in the sticky thread in the orginal development section, you should look for mirrors because hotfile is down or just download chainfire prerooted stock rom)
After you get a stock rooted GB rom installed on your phone, install checkrom using the recovery after wiping data, cache and dalvik.
as i said stock ICS roms are unsafe, other roms are safe... just keep a backup of your efs
and be careful when using odin3.
btw, hitting the "thanks" button is easier than writing it
cheers
Sent from my GT-N7000 using xda premium
Lister Of Smeg said:
However, I fancy seeing what GB is like on it, but get stuck... it seems to hang on Flashing Modem, sits there, and then reboots without finishing by the looks of things...?
Click to expand...
Click to collapse
Go to www.samsung-updates.com firmware section. There are a few 2.3.6 roms available. Stock though. These roms might be non root able. Not really sure as there are not many methods of rooting GB (check Dr ketans thread for more info) . It could also be possible that for rooting again you will need to flash an ICS or JB rom again using Odin.
If you just want to taste the ginger then stock GB rom is quite fast.
Lister Of Smeg said:
Hi Guys,
I wondered if any of you (more experienced, long serving) users are aware of any Gingerbread ROMs? Preferably a CM or any 2.3.7 based, but if they don't exist, any build will do... It needs to be a safe build, a non eMMC bug version, or DeOxed (is that the term)?
Sure, you're gonna say, why bother.. There's JB and KK now, but I like GB and wanted to see what it's like on the N7000?
All help gratefully welcomed..
Thanks, Lister
Click to expand...
Click to collapse
Pristine LC1 is a good option. Its in the OP of the pristine thread. All GB kernels are safe, as above mentioned.
There is no 2.3.7 or CM based N7000 rom
Sent from Nexus 5 on Slimkat
Hi @ASMI1, @kaborayyan, @nokiamodeln91, @AndroidSlave,
Thanks guys, with you're help.... I've finally made it !!! It appears CheckROM HD v6 does not want to flash under Philz (or some other recovery, cant think what now??) However I did manage to get it to Flash under Abyss Recovery Kernel (which is based on GB kernel, apparently).
So it has flashed now, not had chance to play around with it yet as am at work... But just by looking at it, it's bringing back the GB love....
Yes I know it's sad, why go back to GB?? lol. But sometimes it's just nice to go over, for old times sake... Used to do it on my ZTE Blade many a times...
So, (quick questions).
1) With this stock-ish rom, can I remove/tweak/clean up, and then package it (in CWM) as a flashable rom?? or do I have to backup/restore only in that version of CWM??
2) It safe to flash any version of CM9, without using flashing a seperate recovery afterwards... and still avoid the eMMC. It's only official STOCK firmware that killed them....
Thanks once again guys for all your support, I know its not normal (and frowned upon) to use older firmware... But just wanted to see what GB was like again...
Cheers, Lister
Lister Of Smeg said:
Hi @ASMI1, @kaborayyan, @nokiamodeln91, @AndroidSlave,
Thanks guys, with you're help.... I've finally made it !!! It appears CheckROM HD v6 does not want to flash under Philz (or some other recovery, cant think what now??) However I did manage to get it to Flash under Abyss Recovery Kernel (which is based on GB kernel, apparently).
So it has flashed now, not had chance to play around with it yet as am at work... But just by looking at it, it's bringing back the GB love....
Yes I know it's sad, why go back to GB?? lol. But sometimes it's just nice to go over, for old times sake... Used to do it on my ZTE Blade many a times...
So, (quick questions).
1) With this stock-ish rom, can I remove/tweak/clean up, and then package it (in CWM) as a flashable rom?? or do I have to backup/restore only in that version of CWM??
2) It safe to flash any version of CM9, without using flashing a seperate recovery afterwards... and still avoid the eMMC. It's only official STOCK firmware that killed them....
Thanks once again guys for all your support, I know its not normal (and frowned upon) to use older firmware... But just wanted to see what GB was like again...
Cheers, Lister
Click to expand...
Click to collapse
1) not really unless you use a new version of philz touch recovery, which wouldn't happen because on the n7000 the recovery sits on the kernel, thus you are stuck with an old kernel and old recovery. As such your best bet is to do a nandroid backup. Further - when you restore such a backup, I recommend flashing abyss again first so you are in the Ame recovery it was made in
2) yes. Just be concerned of Stock ICS (4.0.4) with a custom recovery. Never flash temporary cwm.zip. matter of fact, just avoid stock ICS at all costs. Newer versions of cm9 are safe. Avoid very old cm9 versions. My personal recommendation to you would be Paranoid Android cm9 ( I think it stopped at around .4a) that one was amazing.
Sent from Nexus 5 on Slimkat