need help - XPERIA X8 Q&A, Help & Troubleshooting

please help me.....i flash w8 ftf files to my x8 but went i try to flash ics kernel my device no reconnized...
(srry for my bad english)

rheks1993 said:
please help me.....i flash w8 ftf files to my x8 but went i try to flash ics kernel my device no reconnized...
(srry for my bad english)
Click to expand...
Click to collapse
check unlock bootloder ady?

Be more specific please. What are you trying to achieve?

flash tool dont do anything when i connect my fone in flash mode
(edit) i figure it out...problem solve.....anyways thank u all

Related

[Q] if i flash custom kernel..

if i flash custom kernel and than i would need to give my phone away to my operator for fixing, will i be able to flash back to stock kernel??
moseschrist said:
if i flash custom kernel and than i would need to give my phone away to my operator for fixing, will i be able to flash back to stock kernel??
Click to expand...
Click to collapse
Simple answer: Yes. You can flash back to stock kernel with Flashtool, SEUS or PC Companion. You also can relock your bootloader with new s1tool. Next time use search button before asking a question .
Cheers ,
SpyderX
Sent from my X8 using Tapatalk Forum app.

[Q] Do i need to flash SE rom before flashing MiniCM ?

they say in MiniCM requirments
"Latest 2.1.1.A.0.6/2.1.1.C.0.0 SE firmware / Baseband: M76XX-TSNCJOLYM-53404015"
Does that mean that before flashing MiniCM rom i need to flash Se Rom ?
becuase i have something bad my provider set me up with.
and in order to flash MiniCm rom i need to do this : ? (correct me if worng)
1.Root The Phone
2.Install Xrecovery (Do i need to install CwmRecovery instead ?)
3.Install nAa Kerneral ? (What version is the best ? )
3.move the rom to sd and install with Xrecovry (miniCM )
___
1. Do i need to Unlock my bootloader ? if yes why ?
2.Do i need to flash an SE firmware before i flash the MiniCM rom ? (if that's a yes, do i need to flash that ? http://forum.xda-developers.com/showthread.php?t=1101332)
___
Can you make a list of the things i need to do in the correct order?
any help ?
yup8 said:
any help ?
Click to expand...
Click to collapse
are u rooted yet? if not check this
http://forum.xda-developers.com/showthread.php?t=1046605
yes to flash a rom u need to fill those requirement,check in ur phone if u have it,goto settings-aboutphone and check,if u have then u can
---------- Post added at 12:20 AM ---------- Previous post was at 12:15 AM ----------
minicm can be installed wiff xrecovery too,
whereas naa kernel is a custom kernel,and to have naa kernel u need to unlock bootloader,however i wont advice u for dat,but if u wish u can do it on ur own risk
---------- Post added at 12:20 AM ---------- Previous post was at 12:20 AM ----------
minicm can be installed wiff xrecovery too,
whereas naa kernel is a custom kernel,and to have naa kernel u need to unlock bootloader,however i wont advice u for dat,but if u wish u can do it on ur own risk
domirex said:
Choose miniCM7 with nAa kernel (everything works there)
It will make his phone faster, smoother and better
Sent from my E15i using xda premium
Click to expand...
Click to collapse
He Told me it's the best combination, Why wont you advice it ?
_____
I don't have the latest SE firmware, i have something custom from my provider.
Do i Flash the latest SE rom, then i flash the MiniCM ? (i do it in same way)
____
What's better Xrecovry or CWMRecovery ?
yup8 said:
He Told me it's the best combination, Why wont you advice it ?
_____
I don't have the latest SE firmware, i have something custom from my provider.
Do i Flash the latest SE rom, then i flash the MiniCM ? (i do it in same way)
____
What's better Xrecovry or CWMRecovery ?
Click to expand...
Click to collapse
to install naa kernel u need to unlock bootloader,u can do it if u want to http://forum.xda-developers.com/showthread.php?t=1399381
if u wanna flash custom roms of xda u need to have latest baseband and build number,
But if naa is the best kernel don't i need to get it ?
btw behind my battery it says 11w31 does that mean it's dangerous ?
I only want App2Sd and faster phone do i have to unlock my boot loader or i can install miniCM without unlocking? any help on this ?
yup8 said:
But if naa is the best kernel don't i need to get it ?
btw behind my battery it says 11w31 does that mean it's dangerous ?
I only want App2Sd and faster phone do i have to unlock my boot loader or i can install miniCM without unlocking? any help on this ?
Click to expand...
Click to collapse
i dont hav idea abt custom kernels cos i dnt use them,neither unlocking bootloader
whereas u can hav app2sd on any custom minicm roms and u dont need to unlock bootloader to install minicm nor to have App2sd
Can someone else who knows answer me ?
yours baseband is in yours phon setings about phon if you hawe in the end 015 than you may flash this rom bat you hawe to root yours phon first
yup8 said:
Can someone else who knows answer me ?
Click to expand...
Click to collapse
Don't unlock Bootloader. I strictly recommend you not to do this.
Because X8 after 11w29 have got bricked during unlocking bootloader.
KASHYAP9 said:
Don't unlock Bootloader. I strictly recommend you not to do this.
Because X8 after 11w29 have got bricked during unlocking bootloader.
Click to expand...
Click to collapse
lol but he's too keen on unlocking it seems cos he wanna try minicm7 with naa kernel combination,let him hav a taste haha
kirmada said:
lol but he's too keen on unlocking it seems cos he wanna try minicm7 with naa kernel combination,let him hav a taste haha
Click to expand...
Click to collapse
If his phone got bricked then what will be his taste ? Then will you pay for repair ??
I am not in anger. So don't take it to your heart.
KASHYAP9 said:
If his phone got bricked then what will be his taste ? Then will you pay for repair ??
I am not in anger. So don't take it to your heart.
Click to expand...
Click to collapse
lol warned him too,showed thread too regarding unlocking bootloader warning,but if still he wanna try out then its his call
kirmada said:
lol warned him too,showed thread too regarding unlocking bootloader warning,but if still he wanna try out then its his call
Click to expand...
Click to collapse
This mean double lol.
KASHYAP9 said:
This mean double lol.
Click to expand...
Click to collapse
now u wanna lol? and like u said dat manufacture after 11w29 are risky to unlock,his is 11w31, so does dat means he cud be in the busted list?
kirmada said:
now u wanna lol? and like u said dat manufacture after 11w29 are risky to unlock,his is 11w31, so does dat means he cud be in the busted list?
Click to expand...
Click to collapse
If he do so then he will be.
BTW Good night KIRMADA you have private message, read that and reply sweaty.
Ok, i wont unlock my bootloader - meaning no kerneral.
Only MiniCM for me so ?
So i need to
1.Root My phnoe
2.What should i do next?
What do i lose if i wont install nAa Kernel ? btw nothing mention about brick here:
http://forum.xda-developers.com/showthread.php?t=1267273
Without nobodyAtall's kernel MiniCM will not work
It is written in first post that you MUST have unlocked bootloader and nobodyAtall's kernel installed!!!
nobodyAtall said:
Requirements:
Latest 2.1.1.A.0.6/2.1.1.C.0.0 SE firmware / Baseband: M76XX-TSNCJOLYM-53404015
Unlocked bootloader
Latest version of the nAa kernel
Click to expand...
Click to collapse
If you don't want to unlock bootloader install GingerDX or other ROM for stock kernel
you need the official sony ericsson firmware for unlocking the bootloader. flash that to your phone using PC Companion or SEUS.
check the bootloader thread , get the tools, verify your simlock is okay with s1tool, if yes, then run msm7227.cmd with your phone attached in flashmode. ( turn off, hold back button while connecting to usb.)
once done, get the naa kernel, put in flashtool/firmwares then run flashtool, click flash, select the naa kernel and click okay. connect phone in flashmode again, disconnect and reboot once done.
copy minicm7 and appropriate google apps to sdcard, boot cwm recovery ( keep pressing volume up button when naa kernel logo appears), do a full wipe,install cm7 zip, then gapps zip.
reboot.
phone now running cm7.
unlocking the bootloader is NOT as scary as people make it out to be as long as you stick to the guide and don't arse around and unplug it before it's done, etc.
Realtbhuion said:
you need the official sony ericsson firmware for unlocking the bootloader. flash that to your phone using PC Companion or SEUS.
check the bootloader thread , get the tools, verify your simlock is okay with s1tool, if yes, then run msm7227.cmd with your phone attached in flashmode. ( turn off, hold back button while connecting to usb.)
once done, get the naa kernel, put in flashtool/firmwares then run flashtool, click flash, select the naa kernel and click okay. connect phone in flashmode again, disconnect and reboot once done.
copy minicm7 and appropriate google apps to sdcard, boot cwm recovery ( keep pressing volume up button when naa kernel logo appears), do a full wipe,install cm7 zip, then gapps zip.
reboot.
phone now running cm7.
unlocking the bootloader is NOT as scary as people make it out to be as long as you stick to the guide and don't arse around and unplug it before it's done, etc.
Click to expand...
Click to collapse
But they told me because my manufacturing date of my phone is late i will brick my phone... it says:
X8 after 11w29 have got bricked during unlocking bootloader.
and i have 11w37
So ? means i cant have MiniCM at all ?

[Q]Help with stock rom

Hi!
I have a request to someone to upload stock rom for X8, flashable by flashtool, I need to back for stock because I need take my phone to warranty repair SEUS and PCC won't work for me;(
Sorry for my bad english
Dawsi said:
Hi!
I have a request to someone to upload stock rom for X8, flashable by flashtool, I need to back for stock because I need take my phone to warranty repair SEUS and PCC won't work for me;(
Sorry for my bad english
Click to expand...
Click to collapse
Search!!!!!!!
http://forum.xda-developers.com/showthread.php?t=2123480

[Q]About using odin

Hi guys i have a question . If u use Odin for flashing a Stock ROM is there any way to prevent the bootloader from flashing or to remove the bootloader from the tar.gz file to prevent the brick ? Thanks for your answers !
here ya go http://forum.xda-developers.com/showthread.php?t=1551586
pryerlee said:
here ya go http://forum.xda-developers.com/showthread.php?t=1551586
Click to expand...
Click to collapse
I apreciate your reply but those link's are dead , and my question was how to remove myself the arm11boot.img .

[Q] How to Update Your xperia Z after flashing custom rom.

Hi Guys
Last month i Flash Existence Rom on My xperia Z...
But I want to know if i Flash Stock Sony firmware i.e .67, will i be able to update my xperia normally through PC Companion...
As of now when i click on repair it doesn't work...
Pls Help... :good:
netharshal13 said:
Hi Guys
Last month i Flash Existence Rom on My xperia Z...
But I want to know if i Flash Stock Sony firmware i.e .67, will i be able to update my xperia normally through PC Companion...
As of now when i click on repair it doesn't work...
Pls Help... :good:
Click to expand...
Click to collapse
i think that repair tool with PCC works with stock recovery/locked boot-loader !
so u should re-stock it manually
i mean flash stock ROM
:good:
Thanks!!!
x102x96x said:
i think that repair tool with PCC works with stock recovery/locked boot-loader !
so u should re-stock it manually
i mean flash stock ROM
:good:
Click to expand...
Click to collapse
Thanks will try it...:good:
netharshal13 said:
Hi Guys
Last month i Flash Existence Rom on My xperia Z...
But I want to know if i Flash Stock Sony firmware i.e .67, will i be able to update my xperia normally through PC Companion...
As of now when i click on repair it doesn't work...
Pls Help... :good:
Click to expand...
Click to collapse
Had the same problem. You have to relock the boot-loader. It's not possible with PC Companion if i'm not mistaking. Just flashing a stock rom with Emma doesn't work either.
What you should do:
1) Download the flash tool
2) Launch the flashtool
3) Click BLU in the left upper corner
4) Connect device in Flash mode
5) Save the unlock code
6) Press relock
Now you can do the update!
Good luck
Thanks
sam5757 said:
Had the same problem. You have to relock the boot-loader. It's not possible with PC Companion if i'm not mistaking. Just flashing a stock rom with Emma doesn't work either.
What you should do:
1) Download the flash tool
2) Launch the flashtool
3) Click BLU in the left upper corner
4) Connect device in Flash mode
5) Save the unlock code
6) Press relock
Now you can do the update!
Good luck
Click to expand...
Click to collapse
Thanks bro will surely try this:victory::good:
netharshal13 said:
Thanks bro will surely try this:victory::good:
Click to expand...
Click to collapse
How to save unlock code ?
And how to Relock it
I am from india and i think here we have 6002 model which is unlocked if not mistaken.
Please help
netharshal13 said:
Hi Guys
Last month i Flash Existence Rom on My xperia Z...
But I want to know if i Flash Stock Sony firmware i.e .67, will i be able to update my xperia normally through PC Companion...
As of now when i click on repair it doesn't work...
Pls Help... :good:
Click to expand...
Click to collapse
if you unlocked your bootloader thn relock it...
if u didnt unlocked yoyr bootloader just flash the stock rom....
Thanks...
:good: Thanks

Categories

Resources