Related
i bougth this galaxy ace s5830l (carrier :claro -puerto rico) and im lil confusse is the s5830l different to the s5830 or are in fact the same one ?
I had a galaxy L, the only change is that the L is the american model, appart form that, there's no change at all , the only thing it's that we can't flash european ROMs (KPH,KPN, etc) The only ROMs we can flash are these:
2.3.4 8 (Vivo) Comes from brasil, the only change is that your phone model will change from L to B (I'm using this, works pretty fine!, if you flash it, dont put the CSC file)
http://forum.xda-developers.com/showthread.php?t=1144575
and this one: (I haven't used it and don't know nothing about it, but I've read it works fine too)
http://forum.xda-developers.com/showthread.php?t=1206112
hope I answered your question! if I did, please press the ''THANKS'' buttom!
Uhmm good to know. So I suppose it is not recommendable to flash any of those ROM found here? Too bad, cause I really wanted to have a shot at a couple of them.
If only u can unlock ur fone.
Sent from GT-S5830 using Grif's Cyanogenmod
You can flash any 5830 ROM. The only difference is the hspa frequencies so you have to use a south American modem.
Sent from my GT-I9100 using XDA App
only need to install the modem S5830LUBKP7 unbranded version is better than that of Brazil, here I leave the modem link, so you can use any European ROM
http://www.multiupload.com/RF070Z621W flash in Odin
zagoya89 said:
only need to install the modem S5830LUBKP7 unbranded version is better than that of Brazil, here I leave the modem link, so you can use any European ROM
..............
flash in Odin
Click to expand...
Click to collapse
Pleaseee... Where i can download the vivo modem.brasilian (S5830LUBKP7), i need this one for repair my galaxy ace.
The link to multiupload is broke :'(
Pleaseee helllpp!!!!!!!!
Thanks!!!
I recently sent my I9000m back to bell because it was playing up after a firmware update from Kies.. They said that they had to replace a major componant. I have got my phone back but now i have:
Firmware 2.2 I9000UGKCL Froyo.. It wont let me update the phones firmware anymore.. i want to flash my device using Odin.. any suggestions on what firmware to use??
Have u used Odin ? And what do you wish to flash ?
bigmadpete said:
Have u used Odin ? And what do you wish to flash ?
Click to expand...
Click to collapse
I want to use odin.. I just need suggestions on what would be best firmware to use. i would like the 2.3 Update
How about GingerBread 2.3.4. Here
http://www.theandroidsoul.com/xxjvp-android-2-3-4-firmware-galaxy-s-install-and-download/
Hope it helps
I9000m said:
I want to use odin.. I just need suggestions on what would be best firmware to use. i would like the 2.3 Update
Click to expand...
Click to collapse
The "best" firmware to use will depend on what type of firmware you want:
- If you want a firmware specifically meant for Bell i9000m phones, it would be the UGKG3 firmware. It is the only Gingerbread firmware released so far for us Canadians. It runs Gingerbread 2.3.3, but be aware that there are no custom kernels for it yet. There is only a rooted stock kernel available. See here:
http://forum.xda-developers.com/showthread.php?t=1211939
- If you want a firmware that was meant for the international i9000 model, there are many many roms that you can try. There are roms which are stock (like XXJVQ/XXJVR 2.3.4), roms which are modded from those stock roms (like Juwe's, Insanity, Darky's, etc.), and completely rebuilt custom roms (like CM7/MIUI 2.3.5). There are lots and lots to choose from.
ok, so i installed the german ics rom on my uk note using this guide.
i want to move back to my "correct" rom, but still keep root if possible. i downloaded the new ics uk rom from here
this may be a stupid question, but can i follow the exact same guide, just substituting the lpy cf root kernel for the lq2 kernel in post 7 from this thread?
my phone was originally the cpw software (even though i didn't actually buy it from carphonewarehouse) and it seems that that rooted kernel is for the unbranded uk version, but i'm guessing that won't be a big deal?
thanks in advance.
Anyone?
Ftb
Postmonkeh said:
ok, so i installed the german ics rom on my uk note using this guide.
i want to move back to my "correct" rom, but still keep root if possible. i downloaded the new ics uk rom from here
this may be a stupid question, but can i follow the exact same guide, just substituting the lpy cf root kernel for the lq2 kernel in post 7 from this thread?
my phone was originally the cpw software (even though i didn't actually buy it from carphonewarehouse) and it seems that that rooted kernel is for the unbranded uk version, but i'm guessing that won't be a big deal?
thanks in advance.
Click to expand...
Click to collapse
If you substitute the LPY kernel with the LQ2 kernel you will get exactly this, a new kernel. The rom will still be the same. In theory swapping the kernel should work but there is always a slight risk it doesn't.
Concerning the cpw branding: What matters is the model, not the branding. So if you have got a N7000 it is fine to flash any rom/ kernel intended for the N7000.
Sent from my Galaxy Note running ICS
Oops, something went terribly wrong
Yeah but I'm intending to actually flash the uk ROM as well. What i really mean to ask is, can i flash the uk (cpw) ROM with the uk (unbranded) kernel, with no more risk involved than if i was flashing the unbranded rom and unbranded kernel? I understand that there's always a small risk, but just wanted clarification that flashing a slightly different kernel than the rom's normal one isn't going to completely kill my phone unless I'm very unlucky
Ftb
Hi all,
I have just bought me a galaxy note with 2.3.6 firmware,
And i wonder what does the PDA and CSC mean in the firmware upgrade to ICS?
http://forum.xda-developers.com/showthread.php?t=1424997
I don't really understand which firmware to choose...
I want to choose 4.0.4 but dont know which one.
I am currently using :
model number GT-N7000
android version: 2.3.6-mobile-star
baseband version: N7000XXLPT
Kernel: 2.6.35.7-N7000XXLA4CL886827
Build: GINGERBREAD.XXLA6
What is my PDA?
What is my CSC?
What is PAD?
What is CSC?
Which firmware can i choose?
What is the difference between all the firmwares?
Thanks in advance
PDA represent your build version
e.g your current build is Build: GINGERBREAD.XXLA6, then PDA version of your ROM is XXLA6
again XX represend for countries, XX means it is for europian country
If suppose your build info contain DDLPA, then DD represens for India and PDA version is LPA, means that ROM is for India
Same way CSC is sales code., you can check your ROM CSC by dialling *#1234#
again first two digits represents country and last three represents release time.
But as such there is no restriction to use any ROM for any country if your device is unlocked(carrier restriction free)
Latest ICS is LRK for germany, you can use that too.
I see
dr.ketan said:
PDA represent your build version
e.g your current build is Build: GINGERBREAD.XXLA6, then PDA version of your ROM is XXLA6
again XX represend for countries, XX means it is for europian country
If suppose your build info contain DDLPA, then DD represens for India and PDA version is LPA, means that ROM is for India
Same way CSC is sales code., you can check your ROM CSC by dialling *#1234#
again first two digits represents country and last three represents release time.
But as such there is no restriction to use any ROM for any country if your device is unlocked(carrier restriction free)
Latest ICS is LRK for germany, you can use that too.
Click to expand...
Click to collapse
Thanks for the reply dr.ketan now i understand something!
Just to make the picture complete:
when i dial *#1234# i get:
PHONE: N7000XXLPT - what that means?
CSC: N7000EULA1 - what that means?
I understand that because my phone uses PDA with XX i can use any EuropeanROM ?
Thanks a lot!
backup your efs first http://forum.xda-developers.com/showthread.php?t=1606012
you need root for that you can get that by following dr ketans guide in sticky section developement.
Sent from my GT-N7000 using Tapatalk 2
mailman77 said:
Thanks for the reply dr.ketan now i understand something!
Just to make the picture complete:
when i dial *#1234# i get:
PHONE: N7000XXLPT - what that means?
CSC: N7000EULA1 - what that means?
I understand that because my phone uses PDA with XX i can use any EuropeanROM ?
Thanks a lot!
Click to expand...
Click to collapse
you can update to any rom any time, just follow dr ketans thread and follow pc odin route
Updating throught Kies/ota is tricky, you need pcode sometimes of the country rom you want to go to, no root, and csc of that countries rom, and a whole stock rom installed for that csc. Best to just always follow pc odin route lol
also read stickies and threads fully cause a lot messed up by not doing that. One tip on ics do not wipe/factory reset
happy reading and searching
Sent from my GT-N7000 using Tapatalk 2
how to install CWM application for N7000XXLRK
Hi,
Thanks for the answers!
I have managed to burn the latest firmware N7000XXLRK successfully.
I want to have the application CWM like i had before how do i install the permanent CWM for this firmware?
Thanks again,
lol csc thats important, 3 letter code by dialing *#06# to get emei,
then dial *#272*emeihere*
Sent from my GT-N7000 using Tapatalk 2
mailman77 said:
Hi,
Thanks for the answers!
I have managed to burn the latest firmware N7000XXLRK successfully.
I want to have the application CWM like i had before how do i install the permanent CWM for this firmware?
Thanks again,
Click to expand...
Click to collapse
Find rooting guide from my signature n get cf rot kernel
Ps: cf root kernwl for lrk not available, use lrg instead of that.
Or use custom kernel like speedmod
Sent from my GT-N7000 using xda premium
CWM and battery
I have rooted the N7000XXLRK successfully.
You mean that i can not install CWM application on that firmware?
So how do i backup the whole phone without CWM?
And another question:
i want to see the battery percentage on the upper bar and not only the battery icon indication, how do i do that? is that possible?
Thanks,
best, not to use cwm on a kernel that can trigger the emmc brickbug, best to use kernel like speedmod k3-11 or likewise which has the trigger for emmc brickbug disabled when doing anything in cwm, or in ics.
Dont wipe, factory reset, change csc, or delete large files on a stock ics kernel
to eliminate these issues read threads/first posts of kernel threads btw.
tip: use kernels based on tw, or stock for stock ics, kernels based on cm9 or other are not for stock..
tip2: when nandroid backup, and wanting to recover that, you need same kernel installed as when backup was made. So use a safe kernel
tip3 when recovering apps and data on different roms, issues can arise due to different database structures, which is why its not really supported on i.e. cm9
tip 4 Some roms are wipe some are not. when going to and from gb and ics stuff could linger, which could cause softbricks. There are clean ways to go to and from, enought threads on that's but always do it on safe kernel whatever wipe action
Sent from my GT-N7000 using Tapatalk 2
phone does not support upgrade via kies
dr.ketan said:
PDA represent your build version
e.g your current build is Build: GINGERBREAD.XXLA6, then PDA version of your ROM is XXLA6
again XX represend for countries, XX means it is for europian country
If suppose your build info contain DDLPA, then DD represens for India and PDA version is LPA, means that ROM is for India
Same way CSC is sales code., you can check your ROM CSC by dialling *#1234#
again first two digits represents country and last three represents release time.
But as such there is no restriction to use any ROM for any country if your device is unlocked(carrier restriction free)
Latest ICS is LRK for germany, you can use that too.
Click to expand...
Click to collapse
i am on the latest ICS stock rom (INU), the CSC shows XXX, when i connect the device to kies
i have tried the *#272*IMEI#
and changed it to INU, the device got full wipe once this happened , still i get the same CSC-XXX
and the same - phone does not support upgrade via kies
plz help
Download ur stock rom and extract the cache. img file from it. install this cache. img using pc odin selected in the csc tab
if you made efs backup with working ota, restore it, if you didnt, check if:
no custom parts installed (kernel)
Or parts that didnt come with same stock rom version (e. g. if you changed modem)
Or if your pcode is different.
pcodin is faster lol
Sent from my GT-N7000 using Tapatalk 2
baz77 said:
if you made efs backup with working ota, restore it, if you didnt, check if:
no custom parts installed (kernel)
Or parts that didnt come with same stock rom version (e. g. if you changed modem)
Or if your pcode is different.
pcodin is faster lol
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
i installed the new firmware INU using the pc odin
note is unrooted no apps are installed
i hav no backup of any of the stock firmware n efs ..
.. ll that - "Download ur stock rom and extract the cache. img file from it. install this cache. img using pc odin selected in the csc tab"
work. i need to try it nw ! !
nokiamodeln91 said:
Download ur stock rom and extract the cache. img file from it. install this cache. img using pc odin selected in the csc tab
Click to expand...
Click to collapse
his didnt work.. pcodin CSC doesn't recognize img files ! ! !
ShreyasRewagad said:
his didnt work.. pcodin CSC doesn't recognize img files ! ! !
Click to expand...
Click to collapse
yeah u r right... my bad.. use mobile odin
nokiamodeln91 said:
yeah u r right... my bad.. use mobile odin
Click to expand...
Click to collapse
this wayzz not workin.. it requires root.. my note is unrooted.. plz temme sum other way..
dr.ketan said:
PDA represent your build version
e.g your current build is Build: GINGERBREAD.XXLA6, then PDA version of your ROM is XXLA6
Click to expand...
Click to collapse
Thanks for the explanation, but what do the letters PDA actually stand for?
(And please don't say "Personal Digital Assistant," because that's all I can find and I've been searching all day.) :fingers-crossed:
I'm sure it must mean something else when it is being used in a discussion of Android mobile phone software.
Does anyone know what "PDA" actually stands for, what are the actual words represented by that abbreviation?
Thanks in advance for your help.
CSC and Google Play App
I've tried a lot of ROMs. Some ROM makes impossible to install applis from Google Play Store. For example when using the Sweet V5 ROM, I cannot get Firefox nor Chrome from the market. It says my Galaxy Note is incompatible. Do you have any idea of CSC management ?
please help me
dr.ketan said:
PDA represent your build version
e.g your current build is Build: GINGERBREAD.XXLA6, then PDA version of your ROM is XXLA6
again XX represend for countries, XX means it is for europian country
If suppose your build info contain DDLPA, then DD represens for India and PDA version is LPA, means that ROM is for India
Same way CSC is sales code., you can check your ROM CSC by dialling *#1234#
again first two digits represents country and last three represents release time.
But as such there is no restriction to use any ROM for any country if your device is unlocked(carrier restriction free)
Latest ICS is LRK for germany, you can use that too.
Click to expand...
Click to collapse
dr. ketan sir, i have some problem to understand PDA and CSC defenition and i also have some problem about unrooting my note 2
my note 2 build number is N7100UBDMA1 and i want to unroot my device.
my question is, i see your answer above that i can use any ROM for any country as long as my device is unlocked ? so can i use indonesia firmware to unroot my device ? because i bought this device at china and now i'm living in indonesia
thank you so much for your attention sir
Hi,
First of all here are my specs...
S5830
Android: 2.3.3
Baseband: S5830XWKPA
Kernel: 2.6.35.7-perf-CL561786
[email protected]#1
Build: GINGERBREAD.XWKPY
I want to flash this rom from sammobile which I beleive should work with my phone
Model Country/Carrier Date Version PDA CSC
GT-S5830 United Kingdom / Ireland 2011 September Android 2.3.6 S5830XWKPY S5830XEUKP1
but before I do I would like to backup my existing rom in the same format as this rom so I can flash through odin.
I found this page on the wiki for backing up your rom http://forum.xda-developers.com/wiki/How_to_backup_Original_ROM but its not in the same format as the downloadable roms. Can I flash this through odin? or how can I backup my rom like the downloads from sammobile?
I just want a backup so I have something to fall back on should I need to.
Thanks
First of all. The rom you are trying flash is very old. New firmwares are more stable. Try a rom which was released this year. I wonder why you want to backup the original rom, its old. Anyway, just backup stuff using cwm, search for your current firmware of sammobile and download it. If you want to return back to original firmware, flash the firmware via odin and restorethe cwm backup.
reply
Hi, thanks for the reply.
There is no official rom higher than 2.3.6 for this phone, I'm guna flash cyanogenmod at some point when I get a bit more time but for the time being I just wanted to flash official 2.3.6. Am I wrong in thinking the CWM needs a rooted phone to work? or will this feature run on unrooted phones?
thanks
Try the Spanish Rom XWKTQ.. And i'm sure you'll love it.. Almost Bug free and really fast..
Sent from my GT-S5830 using xda premium
aaronmarsh632 said:
Hi, thanks for the reply.
There is no official rom higher than 2.3.6 for this phone, I'm guna flash cyanogenmod at some point when I get a bit more time but for the time being I just wanted to flash official 2.3.6. Am I wrong in thinking the CWM needs a rooted phone to work? or will this feature run on unrooted phones?
thanks
Click to expand...
Click to collapse
CWM needs a rooted phone.
About the firmware. Yes the highest android version is 2.3.6, but new firmwares have more features and more stable. Flash XWKTQ.
reply
thanks for that
reply
Just 1 quick question, just want to double check, aslong as its XW*** or another uk rom can I just flash it, because i was under the impression you cant flash roms from other countries unless its rooted?
thanks
aaronmarsh632 said:
Just 1 quick question, just want to double check, aslong as its XW*** or another uk rom can I just flash it, because i was under the impression you cant flash roms from other countries unless its rooted?
thanks
Click to expand...
Click to collapse
If your phone is operator specific then flashing rom from different countries might cause problems. If your phone is unlocked and you can use it with any operator then no problem. You can flash any rom.
reply
ah ok, mine is on o2 uk but it was bought from phones4u so it should already be unlocked, so thats good to know. There doesnt seem to be any o2 branding on the phone so i'll have a play when I get sum spare.
cheers
But still, just try using a sim from some other operator and see if it works. If it doesnt, your phone is operator specific.
yeah, will do,
thanks