Hi,
The automatic time not work properly in the last nightly of cm10. I need to know if its me or if its a bug from cm10
I did get this kind of problem with ZEUS rom when i was with my v20j baseband(1035.23_20110403). Now im on v10e baseband(1035.23_20110707) and auto time work perfectly with ZEUS
And i cant know if my cm10 RIL match with my baseband because that say unknown
thx
same here
I found that it always sets the TZ to GMT, i disabled the option to also fetch the TZ from the network, that worked for me
For me it actually adds 2 hours. It detects the time zone correctly but the clock is 2 hours in the future.
Happy to see im not the only one
I adjusted my time zone too but after reboot, time zone changed again lol I put it back to AUTO and now the time is ok
Hope that will be fixed, i use my cell for my alarm
Cm10 work with v20 ril... maybe need a v20 baseband
But strange, i was with a v20 baseband before and i got this problem with ZEUS based on v20... v10 baseband resolved my problem with zeus
Im testing now with v20n baseband
Got the same.
Anybody got this?
When looking in the facebook app I always see under a status: About 2 hours ago.
Maybe it's posted 5 minutes ago.
Tried to get v20n baseband but failed... Anyway i think its not a baseband issue... 07072011 is the lastest baseband for OB. So i think that will install an older baseband if i put v20n baseband
it's CM10 bug, will be fixed...
Tmezone fixer
Just wanted to let everyone know that I ended up fixing this problem by downloading an app called Timezone Fixer which simply just resets and updates the logs. Just a warning, it says theres a small chance it can soft brick your phone.
jlkill3r said:
Just wanted to let everyone know that I ended up fixing this problem by downloading an app called Timezone Fixer which simply just resets and updates the logs. Just a warning, it says theres a small chance it can soft brick your phone.
Click to expand...
Click to collapse
You know that this a old thread and it was a baseband problem (or maybe a CM10 and baseband problem). Anyway since I have the v30 baseband there is no problem. OK what you tell will probably fix it too but a newer baseband might fix that and a few more problems, well if there is a newer baseband avivable in your region.
Odp: Automatic time not work in cm10
SaschaKH said:
You know that this a old thread and it was a baseband problem (or maybe a CM10 and baseband problem). Anyway since I have the v30 baseband there is no problem. OK what you tell will probably fix it too but a newer baseband might fix that and a few more problems, well if there is a newer baseband avivable in your region.
Click to expand...
Click to collapse
Maybe yes maybe no. I've got a new baseband from v30 and auto time not working properly. Always is one hour earlier.
Jerry
AW: Automatic time not work in cm10
jerry_pl said:
I've got a new baseband from v30 and auto time not working properly. Always is one hour earlier.
Click to expand...
Click to collapse
Yes was the same for me on v20o baseband (was on GMT and not on CET) but looks like it disappeared with v30b baseband. OK we know now a app that corrects it or you could do what I did just turn auto of and set it manually.
Sent from my LG-P970 using xda app-developers app
Related
It came to my attention from Tayutama in the CM7 nightlies thread that alot of people's problems with CM7 is issues with the new baseband we have all upgraded to. I went ahead and tested the newer basebands RIL with CM7 and voila! alot of bugs have been fixed and everything is running *MUCH* better now.
Edit:
Paul posted a patch for this awhile ago that I didn't realise, heres the link:
RIL Update
Hope it helps you, cause it surely helped me.
Credits to Paul for the patch.
could you elaborate on the specific bugs resolved by this?
Thank you.
aMpeX
does this change the baseband then? or does it just fix issues with baseband 405?
Thanks a lot.
Will i have to run this fix everytime i upgrade to a new nightly (or stable)?
This does not change the baseband, what it does it update the RIL in CM7 to be more compatible with the 405 baseband.
Thanks a lot.
Will i have to run this fix everytime i upgrade to a new nightly (or stable)?
Click to expand...
Click to collapse
Unfortunately, yes. Until cm_arcee decides to update his baseband and the reflect the source changes in CM7, we have to keep using this.
I can't determine how many bugs its solved since I only applied the fix an hour ago, but operation seems much smoother and not as many *hiccups*.
i downloaded it, booted to recovery, tried flashing and am gettin installation aborted??
mintvilla said:
i downloaded it, booted to recovery, tried flashing and am gettin installation aborted??
Click to expand...
Click to collapse
I am also getting same error
mintvilla said:
i downloaded it, booted to recovery, tried flashing and am gettin installation aborted??
Click to expand...
Click to collapse
+1
Sent from my Optimus 2X using XDA App
mintvilla said:
i downloaded it, booted to recovery, tried flashing and am gettin installation aborted??
Click to expand...
Click to collapse
same error here
you can probably use this as well, it does essentially the same (flash the lge_ril.so matching the 0405 baseband)
mintvilla said:
i downloaded it, booted to recovery, tried flashing and am gettin installation aborted??
Click to expand...
Click to collapse
+2
CM7 Nightly#5
405 baseband
Clockwork mod flashed from app
Same problem here..instalattion aborted
Sent from my Optimus 2X using XDA App
aMpeX said:
you can probably use this as well, it does essentially the same (flash the lge_ril.so matching the 0405 baseband)
Click to expand...
Click to collapse
Thanks for the link, I am able to flash
ok i flashed the RIL with the other file, see how it goes now
update: unfortunately, phone rebooted itself one time within 15 minutes of using this RIL , and after rebooted, no sound already
rayfoo said:
ok i flashed the RIL with the other file, see how it goes now
Click to expand...
Click to collapse
Flashed the RIL and my first experiences seem faster and more stable. Thanks for the hint!
cant flash the RIL, inst. aborted.....
Hi,
I can't flash booth zip files(modaco/XDA). I'm getting a error(bad).
Hey dudes, the zip file is incomplete - the update-binary and update-script is totally missing...
Interesting is the libraries are same on size but different inside. So where you get it?
i've manually put the lge-ril.so and also the libril.so from Fr15 inside my CM /system/lib.
3 hours the phone is running without reboots, freeze, loss of sounds or problems of any kind.
Without this fix I experienced a lot of sleep of death and frequent loss of sound.
Hope this can help
Here is what I've done
Hi Guys,
I'm currently running the lastest CM Nightly and have never changed Baseband or Kernel.
The question is should i? and is there a better rom to be using?
Hi!
I believe you've got a good ROM now. The latest CM nightly is pretty good I think so there is no need to change that. (Although, you could try Temaseks CM7 KANG, but that's just my opinion , link in signature btw)
BB is another story though. You should ask yourself: Do I have good signal and call quality? If so, then there's no need to change it. At least I wouldn't change it. What I would try to change is your RIL (if it's necessary though). Download the GetRIL app on the market and let it check if your RIL and BB match. If they match then keep it that way . If not change it using that app.
Kernels on the other hand are optional. If you want to overclock your CPU, or if you want a ramhack then you should flash a kernel. Right now I believe you've got stock CM kernel on your phone, which is pretty good, but not the best. Take a look at the ETaNa Kernel thread, (link in signature) There you'll find more information about what this kernel does with your phone.
Oh and one more thing, you don't HAVE TO change your rom etc. I mean, it's not like we're forcing you to change it right? When you're happy with what you have right now, why don't you keep it like that? But, it's your choice obviously
mness90 said:
Hi Guys,
I'm currently running the lastest CM Nightly and have never changed Baseband or Kernel.
The question is should i? and is there a better rom to be using?
Click to expand...
Click to collapse
Hello I will always recommend you try if you want to flash the baseband 1120 greatly enhances the quality of the call!
Pascalone19 said:
Hello I will always recommend you try if you want to flash the baseband 1120 greatly enhances the quality of the call!
Click to expand...
Click to collapse
cheers guys, where can i find the latest basebands as my call & signal quality isn't great
I think the first thing you should try (also because it's the easiest thing to do) is to get "GetRIL" app from gmarket or gplay or whatever it's called now and see if your RIL and BB match. If they don't, get the matching RIL and see if that has improved quality. If it has, great, no further action necessary... if it hasn't then you can proceed to experimenting with different BB
mness90 said:
cheers guys, where can i find the latest basebands as my call & signal quality isn't great
Click to expand...
Click to collapse
Here you go:
http://forum.xda-developers.com/showthread.php?t=1500443
Here the baseband see real improvements if known and remembered as they told others to find the right GetRil with RIL.
If you have been good press thanks.
Thank you!
Pascalone19 said:
Here you go:
http://forum.xda-developers.com/showthread.php?t=1500443
Here the baseband see real improvements if known and remembered as they told others to find the right GetRil with RIL.
If you have been good press thanks.
Thank you!
Click to expand...
Click to collapse
Hi mate,
i have flashed this baseband but am only now recieving G connecting instead of H/3G
mness90 said:
Hi mate,
i have flashed this baseband but am only now recieving G connecting instead of H/3G
Click to expand...
Click to collapse
Have you installed the corresponding RIL, which is located in the thread?
mness90 said:
Hi mate,
i have flashed this baseband but am only now recieving G connecting instead of H/3G
Click to expand...
Click to collapse
Also, not every BB works perfectly on every phone, country and provider... So yeah, as said before, first try a matching RIL and then look if you connection improves...
i've got the getril app and its showing that i dont have matching ril and bb but when i downloaded it to be matching and it actually caused me to drop more calls and have other problems,
restored so they arent matching but im getting better reception and generally internet works most of the time.
so my question whats the point of them both supposed to be matching?
LG 2x
Carphone warehouse open UK
unlocked
current ril 0218 (V10b, Europe)
current BB 1035.21_20111120
the app says i should get ril 1120 (v20l)
anyone have any better combo suggestions?
mez90 said:
i've got the getril app and its showing that i dont have matching ril and bb but when i downloaded it to be matching and it actually caused me to drop more calls and have other problems,
restored so they arent matching but im getting better reception and generally internet works most of the time.
so my question whats the point of them both supposed to be matching?
LG 2x
Carphone warehouse open UK
unlocked
current ril 0218 (V10b, Europe)
current BB 1035.21_20111120
the app says i should get ril 1120 (v20l)
anyone have any better combo suggestions?
Click to expand...
Click to collapse
I suggest you just put that in. Nothing will gonna happen. If its worse than before you can put old RIL back anytime.
mez90 said:
i've got the getril app and its showing that i dont have matching ril and bb but when i downloaded it to be matching and it actually caused me to drop more calls and have other problems,
restored so they arent matching but im getting better reception and generally internet works most of the time.
so my question whats the point of them both supposed to be matching?
LG 2x
Carphone warehouse open UK
unlocked
current ril 0218 (V10b, Europe)
current BB 1035.21_20111120
the app says i should get ril 1120 (v20l)
anyone have any better combo suggestions?
Click to expand...
Click to collapse
In the post that I have posted for the baseband are also the RIL to flash!
So, did you try to put this new RIL? Any improvements?
Like SP1996AC and I said, you should have started by changing only the RIL. This is the easiest of the operations and could have fixed your problem.
Like they say in America, you start by picking the low hanging fruit first.
You climbed the tree and found out that the fruit on the top wasn't good... now you have to climb down again and try the other fruit.
jordantr said:
I suggest you just put that in. Nothing will gonna happen. If its worse than before you can put old RIL back anytime.
Click to expand...
Click to collapse
Thanks for the reply. I did try the suggested rail but it was worse which is why I went back to a mismatch. I will try the other combinations but at the moment its working OK so might stick to this until the weekend.
Thanks
Hi
(less than 10 posts, so i have to post it here)
i suffer from the bug which is described in the cm9 owain developer thread.
http://forum.xda-developers.com/showpost.php?p=24086754&postcount=1681
I'm not sure i really have the same bug, but something similar. Other users in a german forum also have this problem.
The Problem:
1. start phone
2. wlan is on
3. deactivate wlan -> mobile data starts
4. activate wlan -> mobile data off
5. wait about 15minutes, phone in standby
6. deactivate wlan -> no mobile data starting
7. toogle flight mode -> mobile data working again
8. wait again about 15 minutes -> mobile data fails again
Without waiting some minutes after toggling the flight mode or boot everything works as it should.
Disabling automatic time didn't work for me. Still the same issues.
I installed alogcat. can someone tell me which filter i can set to get only relevant information?
thanks
Timo
i also encountered this issue, however it started on cm 7 and even when i reverted to stock rom the issue persisted.
ive sent my device in for repair (2nd time, since they did nothing the 1st time).
so i dont think its a rom issue since it is present with all roms ive tested, also different bb (from 218 to 1120 and different ril combimations) .
so since this started happenig about 2months or so ago i dont think it is software rwlated but then that is just a guess....
would be great if you could provide some filtered logs for the devs so they can see if its software related.
Sent from my HTC Wildfire using XDA
Same issue here!
Since i have CM9, i have this issue. Baseband 218 works only perfect on CM7.
Even at stock, I have this problem now...
hmm can it be that cm9 damages the device? or does something that is not reverted when resetin the device to stock?
Sent from my HTC Wildfire using XDA
did you just restore a back up stock ROM or have you tried smartflashing the stock ROM?restoring back ups sometime are not erasing some system files...try smartflashing the stock ROM...it will wipe everything on your phone including partition...and your OS is back to stock(unrooted)
chupi_24 said:
did you just restore a back up stock ROM or have you tried smartflashing the stock ROM?restoring back ups sometime are not erasing some system files...try smartflashing the stock ROM...it will wipe everything on your phone including partition...and your OS is back to stock(unrooted)
Click to expand...
Click to collapse
i used smartflash, thats why i think its not software related or at least not cm9 related...
Sent from my HTC Wildfire using XDA
i have a same problem once in a while signal dissapears on cm9. Now testing on Kang Cm7.2 with 20c BB and 128 RIL.
I called LG, and my device is tomorrow exchanged (VIP service in the Netherlands), hope that the solution will be.
I tested my device with CM7 KANG 80 again yesterday. With CM7 data works after i disable WLAN. Back again on CM9 the data does not activate. Only after toggling Flightmode.
hm interesting... maybe there are multiple ptoblems which cause the same effect....
Sent from my HTC Wildfire using XDA
UPDATE
OWAIN 31 CM9
Baseband v10d 0725
harsh kernel
still same problems.
Phone is now exchanged (today). I think the bug is fixed now for me. Will checking out these days!
gerbenp said:
Phone is now exchanged (today). I think the bug is fixed now for me. Will checking out these days!
Click to expand...
Click to collapse
you got a new device? please let me know if you still get the problem.
Sent from my HTC Wildfire using XDA
I got the same problem since V20q BB.
Gesendet von meinem Optimus 2X mit Tapatalk
a more experienced android user/tester/.. told me, that it is a general cm9 problem. so there is nothing we can do, but waiting.
this also fits to my testings. with cm7 everything worked fine for me.
for now just deactivated wlan most of the time, my data plan is big enough.
whenever i hear something new i'll post it.
-----------------------------------
owain wrote he probably fixed it.
downloading kang 35 and testing.
Pitscho said:
owain wrote he probably fixed it.
downloading kang 35 and testing.
Click to expand...
Click to collapse
Still don't working for me (coming from full wipe)
yep, for me neither.
grognaz said:
you got a new device? please let me know if you still get the problem.
Sent from my HTC Wildfire using XDA
Click to expand...
Click to collapse
Problem is now fixed for me. Today and yesterday have been outdoors, and everything just went back the way it was!
gerbenp said:
Problem is now fixed for me. Today and yesterday have been outdoors, and everything just went back the way it was!
Click to expand...
Click to collapse
And that is with a new o2x?
Sent from my HTC Wildfire using XDA
grognaz said:
And that is with a new o2x?
Sent from my HTC Wildfire using XDA
Click to expand...
Click to collapse
Yes, that's right.
Updated to latest CM 7.2.0 Rom however I'm sure my baseband also needs to be updated however struggling to find more info.
My current baseband is: 1035.21_20110218
my kernal is [email protected]
Do these need updating / changing and if so what should I change too and where do I get links please?
Thanks!!
choccy31 said:
Updated to latest CM 7.2.0 Rom however I'm sure my baseband also needs to be updated however struggling to find more info.
My current baseband is: 1035.21_20110218
my kernal is [email protected]
Do these need updating / changing and if so what should I change too and where do I get links please?
Thanks!!
Click to expand...
Click to collapse
Check for tonyp's thread related to BB and questions about it in the DEV section.wil answer all your questions mate
I have same problem with latest CM 7.2.0 Rom and find solution with BB 120420 LGSU660AT-00-V20m-450-05-APR-20-2012+0.fls and RIL 405 BB you will find here http://forum.xda-developers.com/showthread.php?t=1658047 kernel symbi0sis_kernel-1.1.zip you will find here http://forum.xda-developers.com/showthread.php?t=1835661 how it works so far good.
if everything is working then don't touch it. if you have problems with static noise during call then it's baseband problem - some of us had that, as cm7 overwrite your baseband with 218 one and not every phone is happy with that baseband. it's essential if you have nandroid of your original rom. reflash it and check which was your original baseband. then return back to CM7, find correct baseband (there's excellent thread by our local hero, tonyp. you have link in previous posts) and flash just a baseband. use getril to find correct RIL. or feel free to experiment with different basebands, but once again, if everything is working okay then don't touch it.
CM7 does not change your baseband, only the RIL.
As stated before, use Getril to make sure the baseband and RIL match. Only change your baseband if you're having battery/reception issues.
Sent from my Optimus 2X using Tapatalk
I noted that into the phone-info screenshots the amount of reported available ram can be different by some megabytes, sometimes it appears to be 420, sometimes 404 (mine has 404 mb of ram).
Is this dependent by the baseband/ril ?
Giuseppe
gst0098 said:
I noted that into the phone-info screenshots the amount of reported available ram can be different by some megabytes, sometimes it appears to be 420, sometimes 404 (mine has 404 mb of ram).
Is this dependent by the baseband/ril ?
Giuseppe
Click to expand...
Click to collapse
I don't think so....
Yes, I found myself that the baseband is irrelevant to that.
I installed two different baseband and the amount of reported ram remained constant. Apparently the only parameter that can affect that is the ramhack parameter.
Levus said:
I don't think so....
Click to expand...
Click to collapse
Im currently using Boype's Modded CM7, and there is Really BAD Noise during calls.
I am Using V20G Indian Baseband,
When i flashed IZS v4, Without changing baseband, this problem was gone.
Please help ASAP as calls are really important!
If calls were important, why you don't just use IZS, since the problem isn't happening with it?
The ROM isnt as smooth as CM7 for me.
Im waiting for a few updates on IZS.
So, any fix?
Btw, what is strange is that only the other person hears the noise. I do not.
Bump
ykumar00 said:
Btw, what is strange is that only the other person hears the noise. I do not.
Click to expand...
Click to collapse
Noise in call was a known cm7 bug
So it can't be fixed, or is there any way? Cuz I can't get myself to leave this ROM lol
Did you updated Basebands that Boype put in First post?
boype said:
Download links for Baseband changer package:
Download mirror 1: Mediafire
Download mirror 2: Rapidshare
Only change your baseband if you know what you are doing. The procedure is really simple and instructions are included in the zip file. Changing baseband will only affect baseband, your ROM / settings / apps will be unaffected.
Click to expand...
Click to collapse
I should use my country v20 baseband right? Our should I do that irrespective of where I live?
ykumar00 said:
I should use my country v20 baseband right? Our should I do that irrespective of where I live?
Click to expand...
Click to collapse
Try to use those that Boype recommend, give a try.
Okay, ill try and let you know....
Okay, this issue was solved in a strange way.....the earpiece also stopped working...so I went to the lg service center and told him about this. He disassembled the phone, and checked the motherboard and told me that I would have to replace the motherboard to fix this problem...and I would have to come 2 days later as the part was not in stock..so he re assembled the phone and gave it to me, but when i made a call, voila! Earpiece working fine and absolutely no noise in call!