Related
ok jist is
tried kernal update, fone stuck on boot screen galaxy s i9000M
SAMSUNG
no matter what i do, even load stock samsung firmware, i get as far as this screen
odlin can still see phone though.
any help would be great
fliptechnologies said:
ok jist is
tried kernal update, fone stuck on boot screen galaxy s i9000M
SAMSUNG
no matter what i do, even load stock samsung firmware, i get as far as this screen
odlin can still see phone though.
any help would be great
Click to expand...
Click to collapse
3 combos buttons work ?
Vol down+home+power on/off ?
Vol Up + home+ power on/off ?
if yes, try to flash the correct rom for I9000M
If you can get into download mode, and Odin sees your phone, then it is very unlikely that you bricked it.
Just flash Darkys ressurection or stock Samsung ROM from Odin.
ok installed darkys, now all phone does is flash galaxy i9000 screen
managed to get past that screen and back to recovery mode, and still d/l mode, trying EZBASE now as i was getting as far as colour S then bursts of vibrations
UPDATE:
stuck on boot loop now, still can access recovery and d/k mode, after trying to install EZBase. is their any other siggestions.
pref, instructions and files for re-loading stock firmware for australia on it, if memory calls had 2.2 of eclair
still no luck people, any further advice please
I just had the same issue with my i9000m. Download the fireware I9000UGJL2.exe from http://forum.xda-developers.com/showthread.php?t=846913
It fixed my issue instantly. Then go to that kitchen rom website and create your own ROM. My phone has never been faster. GPS works very good, way better than before. Even cell service is 100000000000 times better....
ok, good news is i have it working stock rom and rooted, got most aps back on, now my issue is, i cant install clockwork recovery from rom manager, i tried it via odlin and got the screen of phone and pc and the exclamation mark. can some1 please help out as to how i can get clockwork recovery mod installed.
fone details are
galaxy S i9000I now just without the i
firmware 2.1-update1
baseband i9000xxjm4
kernal 2.6.29 [email protected] #2
build ECLAIR.xwjm8
thanks
fliptechnologies said:
i tried it via odlin and got the screen of phone and pc and the exclamation mark.
thanks
Click to expand...
Click to collapse
What did you try flashing with Odin?
electrotune1200 said:
What did you try flashing with Odin?
Click to expand...
Click to collapse
ried flashing
CF-Root-XW_XEE_JVB-v3.1-CWM3RFS
Go to D/L mode and reflash the kernal.
So you tried flashing Chainfires JVB kernal on a 2.1 rom?
I think that's the problem....
electrotune1200 said:
So you tried flashing Chainfires JVB kernal on a 2.1 rom?
I think that's the problem....
Click to expand...
Click to collapse
ok thanks, what should i flash then, or how can i update to 2.2 or 2.3 without loosing files and apps ?
Man you should not try to flash things when you don't understand them.
For this moment you tried to flash a kernel that is for a gingerbread rom (JVB, android 2.3.3) on your Eclair 2.1. Don't you think you should read a bit more before flashing everything on your phone?
Go to the official rom thread and follow the guides to flash a gingerbread(2.3.3) or Froyo(2.2) rom
Ok ill put this as plain and as simple as i can
1. I am new to flashing
2. I asked how to do it, as after all this is a q&a section
3. I feel my questions hvae not been answered correctley
so i shall explain again and this time links may help
1. I want a kernal that will give me recovery options
2. I do not want to loose anything on the phone
3. I want to upgrade to 2.3
so i would like links please or someone who can take the time to write a quicvk step list telling me what to do.
You really need to go to main thread and all info is there, it would take ages to talk you out of this...its all out there, seek and you shall find, its tough love
Sent from my GT-I9000 using XDA App
happened to me ea few nights ago but EZBASE rom got me out of it ,then you can flash a rom from there try it
I agree! Ezbase is a cinge!
Sent from my GT-I9000 using XDA App
/me shakes head, i sware i asked for links, i guess ill go get in trouble again and repost this in a different section.
Just use the search for ezbase 3, would you like your bottom wiped! We try to help...and what thanks??!
Sent from gt i9000 insanity 8.5/fugumod
G'evening guys,
got a little bit of a problem here. My (european) Samsung Galaxy S is screwed. As soon as I boot it up, it loads a custom flashed TWLauncher which immediatly crashes. I can click the message away, but then after a few vibrations it will crash again. I can put it in Kies Mode, but I can't get Kies on Win to start some kind of recovery.
If I try to get into the bootloader, I'm only gonna see the default Samsung bootloader. I tried to push an update.zip on the phone, but it would not install due to some kind of signature errors.
Story first:
1. Rooted it with Superoneclick v1.4
2. Installed Recovery Manager. Not sure if some kind of recovery has been installed, at least none permanent.
3. Updated TWLauncher with SGS Tools in Flash
4. Did a factory wipe
I already tried loading a custom firmware via Update.zip and searched for an official update.zip, but didn't found one.
Also tried to push an older TWLauncher via adb, but this failed as I couldn't use su.
So, does anybody have a clue on how to solve this? Or will the only way to fix it be a send-in to Samsung?
LOL!!!
bricked just because of TWLauncher......
I think that is not brick.....
Flash stock rom via Odin.
Sent from Miui powered SGS
or custom ROM more better and satisfying
azzledazzle said:
Flash stock rom via Odin.
Sent from Miui powered SGS
Click to expand...
Click to collapse
sry for my english
thx for your answer i have tried a few times to flash my sgs with odin but it didnt work . i have started my sgs into the downloding mode and then i start odin to flash and then it does nothing
did you use a guide for flashing through odin? is your phone drivers installed on your computer? what kind of error?
Alright buddy, I agree sounds like you need to reflash a new rom.
Check out this link. By no means am I ordering you to flash darky's rom (even though it is bloody brilliant) It's a good guide for using odin.
If you follow it down to part 2 of the guide then you will have a basically stock Gingerbread with a few tweaks to make it a better experience.
Be sure to read it carefully as some of it isn't necessarily for you.
http://www.darkyrom.com/community/i...g-rc6-need-to-flash-dark_core_2-2-first.2382/
All credits go to darky, ficeto and ceriko obviously for the rom & guide.
Good luck
It's only a BRICK if the device is completely unrecoverable. This isn't even a soft-brick... the launcher just crashed.
Flash a new rom with ODIN;
or Flash a Kernel with CWM recovery via ODIN, and then boot into recovery.
Odin will work; just make sure you've got the drivers installed.
@kilokilo1066
thx this was a good idea but now i have the problem that odin is standing on set Partition and that over one hour what should i do ?? cancel odin and tried again ?
Thanks for your help my sgs is working again the thread can be closed
You made it sound as if your phone was bricked! lol
I'd recommend you to install the Darky ROM 9.5.
I myself am a totally new Android and Galaxy S user. The first thing I did after unboxing my phone was to flash Darky's 9.5 on it. Its brilliant.
Here's the guide.
EDIT: Turns out I'm not allowed to post links. Well use google!
bigred85 said:
@kilokilo1066
thx this was a good idea but now i have the problem that odin is standing on set Partition and that over one hour what should i do ?? cancel odin and tried again ?
Click to expand...
Click to collapse
Glad your sgs is back up and running buddy
Like what everyone els is saying, a reflash is the way to go. Id recomend flashing with EZbase. they offer the best stocklike roms.
bigred85 said:
Thanks for your help my sgs is working again the thread can be closed
Click to expand...
Click to collapse
Read the god damn thread people. Problem solved. Let this thread die.
My Galaxy Ace is stuck in a reboot loop after trying to flash 2.3.6 onto it, when it had 2.3.5 on it previously.
I've used ODIN and no matter what firmware I try to flash onto it, it just goes into a reboot loop.
Any idea how to fix it?
Did you try to do a wipe?
vkanamekuran said:
Did you try to do a wipe?
Click to expand...
Click to collapse
A wipe worked! Thanks!
how to do a wipe please tell
mor1228 said:
how to do a wipe please tell
Click to expand...
Click to collapse
press down home button and then power on phone ...--> you will enter into recovery mode .
select wipe with help of volume keys and there you go out of bootloop
My Galaxy Ace is also in some sorta reboot loop.
Everything was working fine with it (phone is rooted and CWM installed) until I did a phone reset because I was giving the phone to my gf. After doing this the phone reboots, the blue samsung logo plays (without sound) and then repeats ad-infinitum. I can get into recovery mode and download mode ok and I've tried wipe and even restored a CWM backup (it says it was successful) but the phone just keeps rebooting. I can see the phone in odin but I've never tried to flash anything onto it and quite frankly I'm unsure whether it would just make things worse (if it needs to go back to Samsung for repair). Any help would be appreciated...
If you have cwm ..why dont you download some custom rom like cm7and flash it ..that would bring your phone back to life ...then you can downgrade to stock rom if you want ...and btw in cwm try cache partition , clear data /factory reset and clear dalvik cache ..see if it boots after you do this ..
Sent from my SGA rocking CM7.2 by vo-1 + all-in-one script
when i always flash by odin or by cwm i always do wipe , wipe cache and wipe dalvik, this helps me everytime
I managed to flash a firmware from samfirmware and it fixed the reboot.
Now my issue is when I connect to Kies, it says there's an updated firmware for the phone but it fails every attempt to install it. I went back to samfirmware and found this firmware: S5830ZSKPD ## but when I download and extract it there's only 1 x MD5 file and 1 x DLL file?! The other firmware had the 4 or 5 files needed to include in Odin... any ideas guys?
I think its a "one package file " ..I forgot the correct name but there is some option like that in odin ..dont worry it contains all the required files ..and if you are scared to do it then go to you tube ..there are many tutorials showing it then...
Sent from my SGA rocking CM7.2 by vo-1 + all-in-one script
rogers4759 said:
I think its a "one package file " ..I forgot the correct name but there is some option like that in odin ..dont worry it contains all the required files ..and if you are scared to do it then go to you tube ..there are many tutorials showing it then...
Click to expand...
Click to collapse
Yep, that's exactly what it was, thanks again.
Unfortunately with this firmware, Kies doesn't recognise it and provides no info.
I flashed back to the older firmware... I'll just have to keep experimenting I guess.
for flashing with odin --> http://forum.xda-developers.com/showthread.php?t=1225493
many people says, don't upgrade the firmware with KIES.
dianpadi said:
for flashing with odin --> http://forum.xda-developers.com/showthread.php?t=1225493
many people says, don't upgrade the firmware with KIES.
Click to expand...
Click to collapse
Well I could flash it with Odin if I had the firmware but I don't.
It appears it's not available on SamFirmware.com
Do you know where I can download the following firmware?
PDA:KPD / PHONE:KPD / CSC:KPC (THL)
Thanks
Lol I cant understand those firmwares ..can you tell me which version of android you want like 2.3.4/2.3.5/2.3.6 ...then ill be able to help you wanr
Sent from my SGA rocking CM7.2 by vo-1 + all-in-one script
Thanks anyway but I managed to find the firmware online and flashed it using Odin.
Now Kies says I'm using the latest which is a good start : )
Now I just need to find a way to root my SGS2 GT-I9100T
U can try a custom ROM from the Developer's forums here.
I also once stucked in the Reboot Loop..............
But then I installed a custom or if you want features from a official Rom, you can install Stock Based custom ROm from the Developer forums of Galaxy Ace. Really good Rom have been made by the developers
In the chance that someone else is looking for this latest OEM firmware update:
PDA:KPD / PHONE:KPD / CSC:KPC (THL)
It can be downloaded from: http://translate.googleusercontent....flgljh&usg=ALkJrhiMpHV83dugh4RGwhKpyjIrYIgn2Q
It is in "one part file" format and can be flashed using Odin.
whatever may be the problem ......just rem to keep a backup of ur previously used rom and just flash it with cwm...
Progress?
Sent from my GT-S5830 using xda premium
Read all the previous no way out loop boot
Hi every body
i have installed cwm, custum firmware, every thing goes ok
tryed to use simlock remover, no message, turned off the Galaxy Ace but after rebooting, a continuous loop boot, no acces to recovery, flashing on wath ever firmware version with odin success but on rebooting the loop is back, help please.
PS : while flasing with odin : "big partition size!!"
Hi guys,
i just got a Galaxy S (international, germany) and wanted to flash Clockwork Mod so i can flash a custom rom (miui). I got it with version 2.2 so i rooted it with z4root 1.3 and then tried RomManager to get CWM on it. But it did always reboot into Samsung stock recovery mode. So i tried this Odin3 1.7 and flashed a Kernel and got into a bootloop (First this one, then i used the one promoted in this video (YouTube Video, description XDA Thread with promoted Kernel. Phone now stuck at booting (isn`t even bootlooping, just stuck at the GALAXY S GT etc. logo. I still can reach the Download Mode.
Can anyone please help how to get at least the phone working again I`m really desperatly.
Greetings from Germany & Merry Christmas
Alch
Install a new Rom with odin will make your phone boot again.
2.2 is probably too old now.
Upgrade to Gingerbread Stock using Odin. Turn on Repartition and follow the instructions to flash.
Download a Custom Kernel for the Gingerbread firmware that you flashed. Every Kernel except the stock comes with CWM Recovery.
Copy the MIUI zip file to sdcard and flash it with recovery. It should boot right up.
If you are still having bootloops, try doing a factory reset and then boot MIUI.
Don't try things that you aren't experienced with.
Anyway, download odin 1.85, flash stock Froyo, launch Kies, update to official Gingerbread, launch Odin, flash Semaphore Kernel and GG.
Merry Christmas!
How can i flash Stock Froyo/Gingerbread trough Odin? Can`t find anything usefull @ google
btw i can reach Recovery Mode (CWM / Speedmonk something)
(Kinda experienced by flashing around with my N1 for around 2 years now, but never heard about this Odin Program)
thanks for help anyway
AlchemistEDW said:
How can i flash Stock Froyo trough Odin? Can`t find anything usefull @ google
(Kinda experienced by flashing around with my N1 for around 2 years now, but never heard about this Odin Program)
Click to expand...
Click to collapse
I am not going to help you with this one. You need to get comfortable with the forum and its contents first. Read all the guides and stickies before proceeding with Firmware flashing. There are many different types of firmwares with Bootloaders which are often dangerous to flash and few without bootloaders. Hence, first go through the guides and go with the flashing only when you are confident that you are doing everything in right order.
http://forum.xda-developers.com/showthread.php?t=1379853
Just do what dhiru1602 says. after you flashed it with the latest Gingerbread ,
flash the cf-root kernel with odin . than download the latest galaxian/semaphore kernel, copy it to your internal sd-card and flash it with the app SGS Kernel Flasher . you can find that app on the market. good luck mate !
Thanks guys, u really saved christmas for me Just booted up the latest Miui Rom!
Happy Holidays
Alch
[email protected],
after successfully flashing CM9 to my Defy I convinced my friend to go to ICS as well...so far so good/bad!
I followed the guide to install CMW recovery and did a backup of the stock ROM.
After this I copied CM9 nightly and the google apps package to the internal memory...apperantely the zip package of the google apps was bad, so i tried to boot into CM9..it took a damn long time, so I removed the battery (OK, bad move...but so be it don't bit*h about it!)..CM9 booted but said someting about "encryption of the storage failed..please do a factory wipe"......I did so, using CWM recovery...which ended me up in a boot loop without having access to CMW recvry.
So I thought, flashing the zImage again with heimdall will have the bootloader rewritten (maybe the 2nd bad move this day) so I can access recovery again...I imagined zImage was kinda like a BIOS of a PC...apparently it is NOT
After some google-f00 I found out I have to flash an official FW from samsung, with repartitioning,using odin, am I right?
But the probel is, that they tell me to do a *#7465625# to find out details about the stock firmware...but this is not bossible because the phone hangs at the galaxy s boot logo.
So my question is...what can I do to access either recovery or the stock firmware with a phone stuck at boot logo (i can boot into download mode) and having only a nandroid backup of the stock rom?
Can anybody tell me what to do without spending 200 coins to obtain another SGS for my friend (Yeah, I told him that the risk is to brick the SGS, but I have a kind of guilty conscience.
Hope someone can help...
Thanks a lot!
Odin doesnt care about whats currently on your phone . Just go to samfirmware. Com, find a nice stock rom (2.3.3) for i9000, and flash it with odin. If you dont know how to use odin: use the search button in the i9000 section ''how to use odin''. keep us updated / or if you have any other questions :thumbup:
Stoux
Edit: Check this thread out http://forum.xda-developers.com/showthread.php?t=1102881
Sent from my GT-I9000 using xda premium
hey
when i screwed my sgs, odin + darky ressurection rom helped
i can't post a link , google "Darkys_v9.2_Resurrection_Edition.zip" ,though i can't remember if i used that version. some got removed, try to look for a sourceforge link. That still works
and see the reply above how to use odin
Hey,
There are also lots of tutorials on youtube, and other sites to show how to flash an original rom. I also screwed up my install of CM9. And then I followed this guide to get the original rom running again.
w w w.theandroidsoul.com/download-install-xxjvs-firmware-update-galaxy-s-i9000-to-android-2-3-5/
After that, use this link for rooting + CWM:
w w w.theandroidsoul.com/root-xxjvs/
Greets from Holland !
PS: can't link -_- so you have to copy and paste the URL.
Skeesicks said:
[email protected],
after successfully flashing CM9 to my Defy I convinced my friend to go to ICS as well...so far so good/bad!
I followed the guide to install CMW recovery and did a backup of the stock ROM.
After this I copied CM9 nightly and the google apps package to the internal memory...apperantely the zip package of the google apps was bad, so i tried to boot into CM9..it took a damn long time, so I removed the battery (OK, bad move...but so be it don't bit*h about it!)..CM9 booted but said someting about "encryption of the storage failed..please do a factory wipe"......I did so, using CWM recovery...which ended me up in a boot loop without having access to CMW recvry.
So I thought, flashing the zImage again with heimdall will have the bootloader rewritten (maybe the 2nd bad move this day) so I can access recovery again...I imagined zImage was kinda like a BIOS of a PC...apparently it is NOT
After some google-f00 I found out I have to flash an official FW from samsung, with repartitioning,using odin, am I right?
But the probel is, that they tell me to do a *#7465625# to find out details about the stock firmware...but this is not bossible because the phone hangs at the galaxy s boot logo.
So my question is...what can I do to access either recovery or the stock firmware with a phone stuck at boot logo (i can boot into download mode) and having only a nandroid backup of the stock rom?
Can anybody tell me what to do without spending 200 coins to obtain another SGS for my friend (Yeah, I told him that the risk is to brick the SGS, but I have a kind of guilty conscience.
Hope someone can help...
Thanks a lot!
Click to expand...
Click to collapse
hmmm... i read from another site there are some custom rom that requires the phone to be in a rooted stock rom or another custom rom...
example:
to install Galaxy S GT I9000 with Orange Amestris v7.3 ROM Custom Firmware you need to be on stock XWJW1 or XXJVU Firmware since the baseband of "amestris" would be on xwjw1 or xxjvu or custom rom with the same baseband...
what stock rom/firmware the phone was in anyway?im guessing gingerbread stock rom? you still got a chance to update it right since you can access download mode...
from what i can remember, i updated my boyfrnd's s2 from gingerbread to official ics from "sammobile".com (remove quote)
then updated it to a custom rom...
well this might be irrelevant but this is how i updated my galaxy s:
well on my galaxy s i updated it from gingerbread stock rom rooted to gingerbread miui then to ics miui andy's version, since im on ics i have successfully tried different ics custom rom like darknight, slimics, elite etc...
hope this kinda help =]
Thanks a lot...I flashed the original firmware (it didn't start properly, but I don't care) and with this was able to flash the zImage again...then I was able to access bootloader and reinstall CM9