Hello everyone.
I have one problem in CM10 4.0.1 and 4.0.0 and too jb mini project beta 2.
My wifi working, but when i want to connect to my network i have only Obtaining IP adress... and nothing more. What's wrong any ideas to fix this?
I tried back to stock with SEUS/PCC, reflash kernel/rom.
I have this problem only in JB roms, but in isc, gb and stock no.
chrissykess said:
Hello everyone.
I have one problem in CM10 4.0.1 and 4.0.0 and too jb mini project beta 2.
My wifi working, but when i want to connect to my network i have only Obtaining IP adress... and nothing more. What's wrong any ideas to fix this?
I tried back to stock with SEUS/PCC, reflash kernel/rom.
I have this problem only in JB roms, but in isc, gb and stock no.
Click to expand...
Click to collapse
did you tried full wipe
Full wiped too, and first rom, wifi connect and seconds flash gapps too
Related
Hi, I've finally managed to upgrade my OS from 2.2.1 to 4.0.3
thanks to onecosmics ICS RC2.11 rom with RC 2.1 kernel
however, due to few minor issues (eg. usb recognition problem and other minor issues)
Is there any other kernel that I could use with RC2.11 rom?? that will improve general performance and stability??
Also, I think I've spotted something about being able to link facebook account into the ICS as well if you guys know please help me
Thank you~
jdarkj said:
Hi, I've finally managed to upgrade my OS from 2.2.1 to 4.0.3
thanks to onecosmics ICS RC2.11 rom with RC 2.1 kernel
however, due to few minor issues (eg. usb recognition problem and other minor issues)
Is there any other kernel that I could use with RC2.11 rom?? that will improve general performance and stability??
Also, I think I've spotted something about being able to link facebook account into the ICS as well if you guys know please help me
Thank you~
Click to expand...
Click to collapse
As written in the OP of oncecosmic rom, flash some RC1 kernel and your issue of usb recognition will go away..
Google disabled facebook linking in ICS but when you install FB app .. you can sync all your contacts etc..
thanks
Hi, I've tried to flash FuguModICSRC1 + voodoo by transfering via bluetooth and flashing it on top of it after wiping cache
But still having issues with USB do I have to do factory reset as well??
thanks for the help =)
jdarkj said:
Hi, I've tried to flash FuguModICSRC1 + voodoo by transfering via bluetooth and flashing it on top of it after wiping cache
But still having issues with USB do I have to do factory reset as well??
thanks for the help =)
Click to expand...
Click to collapse
well just flashing worked for me.. but if its not working for you then ya you can try doing a factory reset.. or I'll suggest instead flash RC 2.1 again and without booting it flash RC1 kernel and then boot.. this way your data will remain as it is and any problems in rom should go away
>>DID ANYONE TRIED THE ROM ICS FOR STOCK KERNEL http://forum.xda-developers.com/showthread.php?t=1473602
QUESTION::::
1,HOW TO HOTFIX THE SENSOR IN THIS ROM?
2,DID WIFI WORK IN THIS ROM?
I've tried it.
1. 30% to fix sensors. - Better try MiniCM9 - smoothness, fully working but requires custom kernel.
2. Wi-Fi is not working. Only Static IP but it's hilarious.
Cheers,
Mistev
i can't try CM9 or 10 because my X8 can't unlock bootloader
Then I recommend you to try FroyoBread by Dx
Cheers,
Mistev
@op: the dev stopped the project a long time ago. wifi doesn't work, as well as other things.
safe to say there will never be ics for stock kernel. i'd advice you just use a froyo or gb rom and theme it to look like an ics rom.
Sent from my rooted tomato using tapatalk
Hi friends,
1.I have an Xperia X8.I have recently unlocked the bootloader and rooted the phone.I wanted to install CM 7.1(shakira).So,I downloaded the ROM from the official cyanogenmod website.I read in one of the post that it works only with the kernel FXP30.After searching for a long time(because most of the links are dead) ,i finally found one.I flashed the kernel by using the flashtool provided by androxyde.Through the recovery mode,i flashed the cm7.1.It said flashing was successful.But after rebooting,it shows only "free xperia project" and nothing else happens...I tried cleaning the dalvik cahe,wiped the partition,did a factory reset.But no use...Is there any way to get it working? or am i doing anything wrong?
2.is MINI JB 4.2 better than CM 7.1?since i failed installing CM,i have flashed mini jb 4.2...but i want to install CM7.1 so badly...
Thanks in advance ....
maharoof said:
Hi friends,
1.I have an Xperia X8.I have recently unlocked the bootloader and rooted the phone.I wanted to install CM 7.1(shakira).So,I downloaded the ROM from the official cyanogenmod website.I read in one of the post that it works only with the kernel FXP30.After searching for a long time(because most of the links are dead) ,i finally found one.I flashed the kernel by using the flashtool provided by androxyde.Through the recovery mode,i flashed the cm7.1.It said flashing was successful.But after rebooting,it shows only "free xperia project" and nothing else happens...I tried cleaning the dalvik cahe,wiped the partition,did a factory reset.But no use...Is there any way to get it working? or am i doing anything wrong?
2.is MINI JB 4.2 better than CM 7.1?since i failed installing CM,i have flashed mini jb 4.2...but i want to install CM7.1 so badly...
Thanks in advance ....
Click to expand...
Click to collapse
1. FXP30 Kernel??? LOL never heard of that one before.
Any way since I have never heard of that kernel before it probably is pretty old and unsupported. Try using this ROM: http://forum.xda-developers.com/showthread.php?t=1362585 with this kernel: http://forum.xda-developers.com/showthread.php?t=1350484 .
2. Do you mean JB Mini Project ROM? Because that ROM is Android 4.1.2 and not 4.2. Witch one is better depends on what you want. JB Mini Project has a lot more features and a lot more apps are compatible with it since it is a JB ROM, and any CM7 based ROM would be faster but there would be less apps compatible with it.
TheScriptKitty said:
1. FXP30 Kernel??? LOL never heard of that one before.
Any way since I have never heard of that kernel before it probably is pretty old and unsupported. Try using this ROM: http://forum.xda-developers.com/showthread.php?t=1362585 with this kernel: http://forum.xda-developers.com/showthread.php?t=1350484 .
2. Do you mean JB Mini Project ROM? Because that ROM is Android 4.1.2 and not 4.2. Witch one is better depends on what you want. JB Mini Project has a lot more features and a lot more apps are compatible with it since it is a JB ROM, and any CM7 based ROM would be faster but there would be less apps compatible with it.
Click to expand...
Click to collapse
Thanks for replying ....I'll try that ASAP....
Hello...i need ur help...after install cyanogenmod 11 to my samsung advance s, my network is not working. Before this my phone usung gingerbread and i want to upgrade to Kitkat...how to solve this problem ?
AdvanceS users said:
Hello...i need ur help...after install cyanogenmod 11 to my samsung advance s, my network is not working. Before this my phone usung gingerbread and i want to upgrade to Kitkat...how to solve this problem ?
Click to expand...
Click to collapse
Hey, if I understood well you had Gingerbread and flashed boot.img to have custom recovery and install CM11, right?
If yes:
You cannot flash 4.2/4.3/4.4 ROMs if you don't flash first official 4.1 from Samsung, otherwise you will have network problems.
If no:
Are you sure that your device is GT-I9070 and not GT-I9070P?
A few days ago i'm using My wifi then i turn it off after using it. And when i turn My wifi on it won't turning On.. I did Re flashing My firmware but still nothings happened.. Please help me to fix this. Is there a any wifi fix or application can solve this? Anyone help me please
Flash a 4.1 firmware then update to a recent rom (CM11 or AMCHA , AOSP Or sammy , you decide) and choose a good kernel , i recommand AGNi :good:
aaz03 said:
Flash a 4.1 firmware then update to a recent rom (CM11 or AMCHA , AOSP Or sammy , you decide) and choose a good kernel , i recommand AGNi :good:
Click to expand...
Click to collapse
Sir which is the Best ROM fit to My Phone? CM11,AMCHA,AOSP or Sammy? Which do one do you prefer?
Sir i'm running 4.3, meaning i'll go back to 4.1then update it into A recent ROM Like 4.3 again? I'm Confuse... Please help..
4.1 roms are more stable and solve such of issues by simply flashing it , for the stability i recommand Amcha rom + AGNi kernel
try flashing again 4.3 but this time do a factory reset right after you finished flashing...
happened to me once this...i tried to install a custom ROM simply wi-fi won't turn on...
if you are still under warranty be careful not to void it by trying to fix the problem...
Don't flash an official 4.3 or you'll get KNOX , warranty void and plenty of problems
Flash an official 4.1 and after a Custom 4.3 (Amcha)
aaz03 said:
4.1 roms are more stable and solve such of issues by simply flashing it , for the stability i recommand Amcha rom + AGNi kernel
Click to expand...
Click to collapse
Sir do you still have the ROM and the kernel? Can you please attach it here? If it is okay... Thank you
spiderman07 said:
try flashing again 4.3 but this time do a factory reset right after you finished flashing...
happened to me once this...i tried to install a custom ROM simply wi-fi won't turn on...
if you are still under warranty be careful not to void it by trying to fix the problem...
Click to expand...
Click to collapse
Sir i did reflash 4.3..so can i do the factory reset now?