Database Develop

[Q] {Help urgent} Stuck at boot loop

Hey guys i am in a mess ryt now need ur urgent help i rooted my stock ics DDLP8 Rom sucessfully and also i installed speed mod kernel v3 on it everything worked fyn now i didnt know much bt installing custom rom so i download chrack ics rom v5 it was mentioned in installation instruction not to wipe jjust wipe cache & dalvik cache if comming from rooted stock ics room i installed using CWN but after flashing when i reboot it get stuck on samsung logo the bootloop starts please help it was LPY based room does it make any difference what to do now ?? as phone cant be boot up to normal
I Tried flashing the stock rom using ODIN PC But it fails always please help guys can i factory reset it as its risky to factory reset ICS STOCK ROMS

Post your concern on chrack thread they can help you there. They know their rom.

i Am unable to post reply there as its xda policy please help me i am a noob and seriously want to get my cell back

arjun2312 said:
i Am unable to post reply there as its xda policy please help me i am a noob and seriously want to get my cell back
Click to expand...
Click to collapse
After flashing the ics stock rom again it will not boot up?

thank u dude i did flashed stock rom using odin pc can u please help me how to install paranoid to my phone

Go to paranoid thread they can explained it better by reading carefully. I just gonna gave you a warning, flash it while in gingerbread rom not in ice cream sandwich rom it will brick your phone.

? safe to flash ICS/GB if currently on stpck ICS
jonpaslim said:
After flashing the ics stock rom again it will not boot up?
Click to expand...
Click to collapse
Is it safe to flash the stock ICS if I'm currently on sotck ICS LQ2? I have similar problem(stuck at N7000 boot logo).I would be much obliged to anyone for help. My problem is posted here.
Thanks!

booki56 said:
Is it safe to flash the stock ICS if I'm currently on sotck ICS LQ2? I have similar problem(stuck at N7000 boot logo).I would be much obliged to anyone for help. My problem is posted here.
Thanks!
Click to expand...
Click to collapse
Short answer is no. All stock ics kernels are affected. Flash a safe gb kernel before flashing lq2.
Check you're other thread, there's some good info there now.
Sent from my Paranoid Android GT-N7000. It doesn't get much better than this!

after flashing pacman rom - problem

I installed pacman rom 4.3 and the phone gets realy hot and the battery is realy weak in a standart using (whatsapp and internet.)
What can cuse the problem and how to fix it?
Flash antoher kernel mayne and if i flash it wich kernel is good??

valery3212 said:
I installed pacman rom 4.3 and the phone gets realy hot and the battery is realy weak in a standart using (whatsapp and internet.)
What can cuse the problem and how to fix it?
Flash antoher kernel mayne and if i flash it wich kernel is good??
Click to expand...
Click to collapse
I have thier ROM aswell and find it good. Just a minor issue im seeknig an awnser for. Maybe you can see if you have same problem as me?
In settings, can you open up the PAC-man setting? Mine crash the settings... "Unfortunately, Settings has stopped".
However i have a custom KERNEL [KERNEL][AGNi][CM 4.2.2/4.3] 05-08-2013 AGNi pureCM v2.3.3a I9305 (ULTRA SMOOTH) and i have really awsome batterylife with it. But if i cant find fix for my problem i will probaly change ROM. :crying:

Poped said:
I have thier ROM aswell and find it good. Just a minor issue im seeknig an awnser for. Maybe you can see if you have same problem as me?
In settings, can you open up the PAC-man setting? Mine crash the settings... "Unfortunately, Settings has stopped".
However i have a custom KERNEL [KERNEL][AGNi][CM 4.2.2/4.3] 05-08-2013 AGNi pureCM v2.3.3a I9305 (ULTRA SMOOTH) and i have really awsome batterylife with it. But if i cant find fix for my problem i will probaly change ROM. :crying:
Click to expand...
Click to collapse
the settings works fine for me but i didnt flashed the agni kernel im didnt flash any kernel at all .. try do wipe and install the rom again without flashing the agni kernel..

valery3212 said:
the settings works fine for me but i didnt flashed the agni kernel im didnt flash any kernel at all .. try do wipe and install the rom again without flashing the agni kernel..
Click to expand...
Click to collapse
hmm... im really new when it comes to kernels... Dont i need a stock kernel to flash or kernels is includen in roms?

Poped said:
hmm... im really new when it comes to kernels... Dont i need a stock kernel to flash or kernels is includen in roms?
Click to expand...
Click to collapse
Kernels are included in roms

Poped said:
hmm... im really new when it comes to kernels... Dont i need a stock kernel to flash or kernels is includen in roms?
Click to expand...
Click to collapse
its come build in the rom i think its the stock kernel of CM you dont have to flash any kernel if you dont want to..
just reinstall the rom

JJEgan said:
Kernels are included in roms
Click to expand...
Click to collapse
Sweet. Thanks for letting me know that. Sadly i love the customization-options with other kernels.
Edit: And can i just re-flash the rom to get other kernel w/o wipe? I meen since its the same ROM only...
valery3212 said:
its come build in the rom i think its the stock kernel of CM you dont have to flash any kernel if you dont want to..
just reinstall the rom
Click to expand...
Click to collapse
Stock CM kernel, does that include customizations? Like cpu, UV, I/O and the ususal stuffs?
(and now i feel bad for basicly highjacking the thread... sry)
GOT it FIXED Thx everyone!

[Q] Kernel for CM 7.1

Hi friends,
1.I have an Xperia X8.I have recently unlocked the bootloader and rooted the phone.I wanted to install CM 7.1(shakira).So,I downloaded the ROM from the official cyanogenmod website.I read in one of the post that it works only with the kernel FXP30.After searching for a long time(because most of the links are dead) ,i finally found one.I flashed the kernel by using the flashtool provided by androxyde.Through the recovery mode,i flashed the cm7.1.It said flashing was successful.But after rebooting,it shows only "free xperia project" and nothing else happens...I tried cleaning the dalvik cahe,wiped the partition,did a factory reset.But no use...Is there any way to get it working? or am i doing anything wrong?
2.is MINI JB 4.2 better than CM 7.1?since i failed installing CM,i have flashed mini jb 4.2...but i want to install CM7.1 so badly...
Thanks in advance ....

maharoof said:
Hi friends,
1.I have an Xperia X8.I have recently unlocked the bootloader and rooted the phone.I wanted to install CM 7.1(shakira).So,I downloaded the ROM from the official cyanogenmod website.I read in one of the post that it works only with the kernel FXP30.After searching for a long time(because most of the links are dead) ,i finally found one.I flashed the kernel by using the flashtool provided by androxyde.Through the recovery mode,i flashed the cm7.1.It said flashing was successful.But after rebooting,it shows only "free xperia project" and nothing else happens...I tried cleaning the dalvik cahe,wiped the partition,did a factory reset.But no use...Is there any way to get it working? or am i doing anything wrong?
2.is MINI JB 4.2 better than CM 7.1?since i failed installing CM,i have flashed mini jb 4.2...but i want to install CM7.1 so badly...
Thanks in advance ....
Click to expand...
Click to collapse
1. FXP30 Kernel??? LOL never heard of that one before.
Any way since I have never heard of that kernel before it probably is pretty old and unsupported. Try using this ROM: http://forum.xda-developers.com/showthread.php?t=1362585 with this kernel: http://forum.xda-developers.com/showthread.php?t=1350484 .
2. Do you mean JB Mini Project ROM? Because that ROM is Android 4.1.2 and not 4.2. Witch one is better depends on what you want. JB Mini Project has a lot more features and a lot more apps are compatible with it since it is a JB ROM, and any CM7 based ROM would be faster but there would be less apps compatible with it.

TheScriptKitty said:
1. FXP30 Kernel??? LOL never heard of that one before.
Any way since I have never heard of that kernel before it probably is pretty old and unsupported. Try using this ROM: http://forum.xda-developers.com/showthread.php?t=1362585 with this kernel: http://forum.xda-developers.com/showthread.php?t=1350484 .
2. Do you mean JB Mini Project ROM? Because that ROM is Android 4.1.2 and not 4.2. Witch one is better depends on what you want. JB Mini Project has a lot more features and a lot more apps are compatible with it since it is a JB ROM, and any CM7 based ROM would be faster but there would be less apps compatible with it.
Click to expand...
Click to collapse
Thanks for replying ....I'll try that ASAP....

[Q] My mobile is bootlooping! [SOLVED]

I have flashed a kernel befor installing JB and now it just bootloops !
Is there someone who has the defualt kernel for xperia v lt15i ???
i have newer used the bootloader or what its called and now when i try to come there i cant..
Only way for me to be able to start the mobile or go in the bootloader or what its called is if i get a kernel that works for the stock firmware i gues...
PLEASE HELP !

LilleJohn said:
I have flashed a kernel befor installing JB and now it just bootloops !
Is there someone who has the defualt kernel for xperia v lt15i ???
i have newer used the bootloader or what its called and now when i try to come there i cant..
Only way for me to be able to start the mobile or go in the bootloader or what its called is if i get a kernel that works for the stock firmware i gues...
PLEASE HELP !
Click to expand...
Click to collapse
Problem fixed !
I used this kernal from this post
http://forum.xda-developers.com/showthread.php?t=2147792

@LilleJohn if you are trying to install JB 4.3 remember that you can't use a kernel for JB 4.1.2. This will give you bootloop for sure

[Q] How do i know

i installed philz recovery yesterday after which i bricked my n7000 while i tried installing the C-Rom .
I just now used ODIN to get back to my STOCK ROM that is 2.3.6.
Its really interesting to see how i can just go back to the first firmware my phone came with :angel:
Please suggest me a combination of a custom recovery & a custom ROM without getting bricked .
as im new to this open source & trying new things for my phone ,i would like to try something according to your experiences .
Something which is stable ,smooth and latest !!
Thanks !!
i have read many many posts and whenever i try to install any recovery, i get E:verification failed !!
what am i doing wrong !! Please help !!

rajk53 said:
i installed philz recovery yesterday after which i bricked my n7000 while i tried installing the C-Rom .
I just now used ODIN to get back to my STOCK ROM that is 2.3.6.
Its really interesting to see how i can just go back to the first firmware my phone came with :angel:
Please suggest me a combination of a custom recovery & a custom ROM without getting bricked .
as im new to this open source & trying new things for my phone ,i would like to try something according to your experiences .
Something which is stable ,smooth and latest !!
Thanks !!
i have read many many posts and whenever i try to install any recovery, i get E:verification failed !!
what am i doing wrong !! Please help !!
Click to expand...
Click to collapse
While on GB you cannot install any kernel from recovery.. only using Odin. . You have to be either on ICS or JB to be able to follow Philz kernel install steps.

nokiamodeln91 said:
While on GB you cannot install any kernel from recovery.. only using Odin. . You have to be either on ICS or JB to be able to follow Philz kernel install steps.
Click to expand...
Click to collapse
First of all, Thanks a lot for your reply. Now i understand why and how my several attempts failed
now i clearly understand that if im on JellyBean , then i can install kernel from recovery.
I just updated my phone to JellyBean using the official update option in the phone.
Can you please direct me to the right link to install kitkat rom from using odin .

rajk53 said:
First of all, Thanks a lot for your reply. Now i understand why and how my several attempts failed
now i clearly understand that if im on JellyBean , then i can install kernel from recovery.
I just updated my phone to JellyBean using the official update option in the phone.
Can you please direct me to the right link to install kitkat rom from using odin .
Click to expand...
Click to collapse
KK cannot be installed using Odin as its a custom rom.. As you are on JB, root it using one of the Philz kernels matching your rom build number (post 3 or Philz thread TW).. The flash raw r4 kernel, boot into its recovery and then flash KK roms.

nokiamodeln91 said:
KK cannot be installed using Odin as its a custom rom.. As you are on JB, root it using one of the Philz kernels matching your rom build number (post 3 or Philz thread TW).. The flash raw r4 kernel, boot into its recovery and then flash KK roms.
Click to expand...
Click to collapse
Thanks a lot for the information
I checked the link ,i found this kernel to be matching with my build number.
PhilZ-cwm6-XXLRK-XEU-v2.7
Should i now install it using the recovery ?
Also please let me know what do you mean by "The flash raw r4 kernel" ( is this the kernel im currently installing ?)
After installation, please suggest me a KK ROM !

rajk53 said:
Thanks a lot for the information
I checked the link ,i found this kernel to be matching with my build number.
PhilZ-cwm6-XXLRK-XEU-v2.7
Should i now install it using the recovery ?
Also please let me know what do you mean by "The flash raw r4 kernel" ( is this the kernel im currently installing ?)
After installation, please suggest me a KK ROM !
Click to expand...
Click to collapse
And I can add an old baby bottle for free...

ThaiDai said:
And I can add an old baby bottle for free...
Click to expand...
Click to collapse
Please kindly just reply by answering the specifically asked question regarding the kit kat rom.
I am in a confused state as i can see there are a huge amount of ROMs available many are nightly made, which say them to be not in a stable state.
Found the SlimKat in the forum ,downloading the ROM SlimSaber-n7000-4.4.2-20140531.zip 139mb
Installation instructions..
Download the latest build from [here]
Gapps ( if you don't have it already) from [here]
!Recommended! Full wipe, and manual format /system
Flash ROM and the gapps you want, reboot
Maybe a silly question but ,Do i need to download the gapps files & why ??

rajk53 said:
Please kindly just reply by answering the specifically asked question regarding the kit kat rom.
Click to expand...
Click to collapse
Please kindly start to grow up and read and learn yourself. Do not expect spoon-feeding from other members.
This is a development forum. It is not expected that you are a developer but it would be a sign of respect to read their threads and follow their instructions - they spent a lot of their time writing them. And if you not understand then try to use the search.
Should i now install it using the recovery ?
Also please let me know what do you mean by "The flash raw r4 kernel" ( is this the kernel im currently installing ?)
After installation, please suggest me a KK ROM !
Click to expand...
Click to collapse
Not one of these questions show anything of this:
the first is part of the installation instructions.
the second can be found with the search (and was answered thousands of times)
the third is simply against XDA rules

To flash a kitkat rom, the recovery needs to be compatible with SE linux.
The recovery is part of a kernel
To flash a kitkat rom you need to flash a recent kernel first.
Try flashing raw kernel r4,r5, or Forest-CM11. it does not matter that they are incompatible with your current or future roms, they will get overwritten when you flash a rom (roms include kernels).
Then reboot recovery or restart phone and enter recovery again.
Then you wipe cache, data, and system.
Then flash the kitkat rom of choice.
gapps

Azeazezar said:
To flash a kitkat rom, the recovery needs to be compatible with SE linux.
The recovery is part of a kernel
To flash a kitkat rom you need to flash a recent kernel first.
Try flashing raw kernel r4,r5, or Forest-CM11. it does not matter that they are incompatible with your current or future roms, they will get overwritten when you flash a rom (roms include kernels).
Then reboot recovery or restart phone and enter recovery again.
Then you wipe cache, data, and system.
Then flash the kitkat rom of choice.
Click to expand...
Click to collapse
Thanks a lot for the explanation,
I installed slim ROM but i didnot like it . where can i find the simplest basic KK ROM without any mods ?

rajk53 said:
Thanks a lot for the explanation,
I installed slim ROM but i didnot like it . where can i find the simplest basic KK ROM without any mods ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/search.php?searchthreadid=2770097

rajk53 said:
Thanks a lot for the explanation,
I installed slim ROM but i didnot like it . where can i find the simplest basic KK ROM without any mods ?
Click to expand...
Click to collapse
https://source.android.com/