Hi,
My buddy messed up with his i9001 and the current condition when turn on the device,it show "SAMSUNG" and going directly into CWM recovery wihout me holding the power & vol up.
I've tried format system,wipe etc / partition internal SD and success installing fresh ROM zip from external SD but again it does the same again and again by going into CWM recovery.Also when in CWM recovery if reboot automatically like every 5minutes.
Your help will be appreciated!:cyclops:
Can the phone start into the download mode?
Eddicts said:
Can the phone start into the download mode?
Click to expand...
Click to collapse
Yup!and odin multidownloader recognize the device.I've got into ODIN and selected the ops but i do not know where to get the tar,md rom files. or should i just use odin3?what's the difference anyway?
p/s: i do not know which rom etc it was with before.Read somewhere about PIT but i do not quite get it.I'm in Malaysia.
it's rebooting in cwm recovery.... so you will need to flash bootloader: you cand find in i9001 wiki page at cwm recovery section a link to a single post where you will have all you need to flash bootloader and instructions . Good luck !! :good:
bluehawk20 said:
Also when in CWM recovery if reboot automatically like every 5minutes.
Click to expand...
Click to collapse
you need to follow this http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001 To solve your problem use Odin 4.43 with AriesVe.ops and flash a bootloader for other solutions visit My Android solutions, link below
Yup just flash stock rom with ODIN if you cant boot/recover
help
bluehawk20 said:
Hi,
My buddy messed up with his i9001 and the current condition when turn on the device,it show "SAMSUNG" and going directly into CWM recovery wihout me holding the power & vol up.
I've tried format system,wipe etc / partition internal SD and success installing fresh ROM zip from external SD but again it does the same again and again by going into CWM recovery.Also when in CWM recovery if reboot automatically like every 5minutes.
Your help will be appreciated!:cyclops:
Click to expand...
Click to collapse
i am having the same problem... i tried flashing gapps nd aosp after installin cwm... will flashing with odin help??? please tell solution
adisawant said:
i am having the same problem... i tried flashing gapps nd aosp after installin cwm... will flashing with odin help??? please tell solution
Click to expand...
Click to collapse
I'm not sure bumping old topics is a good idea, but if you're having the same issue the same solution would work. Just follow the steps described here.
Related
Please Watch the video and Help me What is it?
I made already All Wipes but still same.
I flashed XXKQE stock Rom still same.
I flashed XXKQI stock Rom still same.
I flashed I9001XXKP4(three files) stock Rom still same.
And I try CM9 RC1 by arco and some of GB custom roms but still same problem.
Please help
Youtube Video
http://www.youtube.com/watch?v=BOH4CN4wltA">http://www.youtube.com/watch?v=BOH4CN4wltA" type="application/x-shockwave-flash" width="425" height="350">
Joy` said:
but still same problem. Please help
Click to expand...
Click to collapse
Flash an i9001 boot loader with AriesVe.ops on Odin 4.43 from My Android Collections or Solutions , link below after that visit your wiki http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001 for a ROM or any other advice you may need
I Try 2 different Pc if you mean this.
Everything was Ok with Stock XXKQI rom I power off my phone normally yesterday night and i couldnt open it Today..
Joy` said:
I Try 2 different Pc if you mean this.
Everything was Ok with Stock XXKQI rom I power off my phone normally yesterday night and i couldnt open it Today..
Click to expand...
Click to collapse
first ensure you have a charged battery, than power down, remove battery, remove Ext SD card and SIM card, press power button for a min and reinsert battery and power up. If still the same, Go into download mode and flash the bootloader with AriesVe.ops
xsenman said:
first ensure you have a charged battery, than power down, remove battery, remove Ext SD card and SIM card, press power button for a min and reinsert battery and power up. If still the same, Go into download mode and flash the bootloader with AriesVe.ops
Click to expand...
Click to collapse
Thank you for answer.
I have a fully charged battery. I tired what you write bu dont work
I flashed bootoader via odin. I think its not about bootloader becasue if you remember telephone go to Language selection screen than reset. I dont have any idea and dont know what can i do :crying:
Edit: I tired Recovery from clockwordmode via CWM it start but phone power off after 2 minutes. So recovery can not completed. I have 3 Backups all off them are same
Have you tried wiping /data ? If that doesnt work try reflash feamod 1.2 and then update to the new ics cwm. Or reflash a stock rom first. It has to work with either one of hese methods
Joy` said:
Please Watch the video and Help me What is it?
I made already All Wipes but still same.
I flashed XXKQE stock Rom still same.
I flashed XXKQI stock Rom still same.
I flashed I9001XXKP4(three files) stock Rom still same.
And I try CM9 RC1 by arco and some of GB custom roms but still same problem.
Please help
Youtube Video
http://www.youtube.com/watch?v=BOH4CN4wltA">http://www.youtube.com/watch?v=BOH4CN4wltA" type="application/x-shockwave-flash" width="425" height="350">
Click to expand...
Click to collapse
make sure you are installing right rom..
Brood I tried but still same.
Now Im downloading your via Odin Roms. I will try them. Rc 2-3-4-5 i will try one by one
* Yes Im sure flashing right Rom
Is trhere any way to Flash i9001 with PIT files Re-PArtition like i9100 ?
Joy` said:
Edit: I tired Recovery from clockwordmode via CWM it start but phone power off after 2 minutes. So recovery can not completed. I have 3 Backups all off them are same
Click to expand...
Click to collapse
Try to solve the recovery problem (if any) first, by Flashing a 6.0 CWM or Touch CWM or what broodplank1337 had advised.
In CWM you can clean out (format) everything before you install a ROM, Best to move all your backups and important files to PC before you format
yesterday i tried to flash peter's rom over my stock rom and it seems was ok,but after flash the phone didn't read the sd card(external i suppose) and after a reboot it stopped to work and it started only in recovery,the os didn't work. i tried to reflash stock rom in download mode but it failed to flash the recovery and the phone is bricked,i can read now only the message of phone that says to me to use kies for recover but obviously kies doesn't read the phone. help me.if screenshots are needed tell it to me
now your phone can boot into cwm or not? if can, try to format system, data & other inside mount & storage menu on cwm then reflash with odin
sorry for my eng
Sent from my GT-S6500D runing BlueDocil ROM
flash the firmware again through odin
Yes,the Phone can boot in CWM but it cannot mount nothing because it says: fails to the read SD or something else,it tried more time to re flash with od in bit nothing always same error:fa il to flash recovery.. Please help me
flash cwm recovery
ooen your firmware with winrar
remove recovery.img (or similar)
flash it
let mobile reboot into recovery
it will flash a package and you would be in stock rom
i didnt used a galaxy mini 2
but this is the method how firmware is flashed on a samsung device
Which recovery do i have to install first?
alessio9899 said:
Which recovery do i have to install first?
Click to expand...
Click to collapse
cwm
Yes but which version?
google is there
May i flash any kind of cwm?
alessio9899 said:
Yes,the Phone can boot in CWM but it cannot mount nothing because it says: fails to the read SD or something else,it tried more time to re flash with od in bit nothing always same error:fa il to flash recovery.. Please help me
Click to expand...
Click to collapse
External or internal SD card?
Hello everyone ! I`m new here, and i have a problem with one of my friend`s galaxy mini 2. He tried to flash a custom rom (don`t know the version) and in his neighborhood was a powercut while flashing with odin...now the phone won`t boot, it remains at the screen where it say "SAMSUNG" and under that the link of samsung`s homepage . i tried to go into download mode, recovery mode, usb jig...nothing`s gonna work
i made a video for what`s happening, but i`m not allowed to post links. sorry for my english .hope you guys will help me.
allexxutzu said:
Hello everyone ! I`m new here, and i have a problem with one of my friend`s galaxy mini 2. He tried to flash a custom rom (don`t know the version) and in his neighborhood was a powercut while flashing with odin...now the phone won`t boot, it remains at the screen where it say "SAMSUNG" and under that the link of samsung`s homepage . i tried to go into download mode, recovery mode, usb jig...nothing`s gonna work
i made a video for what`s happening, but i`m not allowed to post links. sorry for my english .hope you guys will help me.
Click to expand...
Click to collapse
You can ask your friend to reflash the rom?
Sent from my GT-S5570 using Tapatalk 2
:crying:
So I was in CM 10 and I want to install Modern Combat 4 with 1GB of data. SO, I have to do a swap first because oir internal storage is only 0.90 GB (CMIIW). After I edit the vold.ftab file and then I reboot the phone. But, it won't go to home screen. The only thing I can see is the SAMSUNG LOGO and the Galaxy Mini 2 logo. I think by reinstall CM10 via recovery would fix it. The problem is it won't go to recovery. When I trying to press Power + Up + Down + Menu, it do nothing. It even won't boot up
I have installed STOCKROM via Odin. But I still got a bootloop. Maybe cause the /system of CM10 is still inside.
Flash stock again if you will hawe bootlop turn out batery flash via odin cwm and try go to cwm and wipe ewerything in cwm you hawe botloop becase you flash stock whitout wipe and formating system
Flach the CWM again via odin then install tha CM10 via CWM its so easy
Sent from my GT-S6500D using xda premium
Stop posting these PLEASE HELP threads... just wipe data
TheWhisp said:
Stop posting these PLEASE HELP threads... just wipe data
Click to expand...
Click to collapse
He is right
If you fraid lose your data then don't try to install this rom
Cause any proplem of thoose just to be sure re flash cwm or stock rom
Sent from my GT-S6500D using Tapatalk 2
TheWhisp said:
Stop posting these PLEASE HELP threads... just wipe data
Click to expand...
Click to collapse
Can't you read?? If I want to do a full wipe, I have to go to the recovery first. Oh god!!
flash cwm again..
then go to recovery..
wipe everything
then flash stock rom via odin
or restore a nandroid backup.
---------- Post added at 05:37 PM ---------- Previous post was at 05:29 PM ----------
regarding the game youre trying to install.. you dnt have to edit the vold.fstab.. just use the "directory bind" app.. made by a member of xda developers.. i forgot his name..
do a manual binding.. and you can play games regardless of the data size.. as long as you have a big ext_sd storage
i can play need for speed most wanted HD which has 1.8gb of data.. and it runs faster than sd card swap.
i have same problem
i can't go to recovery with stock
or with cwm
download mode is ok but when trying to get into recovery the phone do no thing
i'm install recovery more than time and same problem
elkhshap said:
i have same problem
i can't go to recovery with stock
or with cwm
download mode is ok but when trying to get into recovery the phone do no thing
i'm install recovery more than time and same problem
Click to expand...
Click to collapse
why did you mess it up? dont ever flsh stock without wiping...if you where on cm10 not booting...you can adb reboot recovery...but in stock you cant...
Fallen_Knight said:
why did you mess it up? dont ever flsh stock without wiping...if you where on cm10 not booting...you can adb reboot recovery...but in stock you cant...
Click to expand...
Click to collapse
then what i can do now and if you have any way to install cm with odin
that happened to me twice...i cant go to recovery...1st time i encountered was with cm10...
i flashed stock then bootloop...so i removed battery and everything...after an hour. i pressed vol up down home power then insert battery...poof...it booted recovery...
second time was with cm10.1.. i cant boot to recovery because i left my phone off for 15mins and forgot to turn on...so i booted cm10.1... typed su then reboot recovery on terminal emulator...then wiped everything then flashed stock then cwm...
I have the same problem i can't access to recovery mode Y_Y
Dinepada said:
I have the same problem i can't access to recovery mode Y_Y
Click to expand...
Click to collapse
read this first to avoid bootloop
under FLASHING CUSTOM ROM PART.
http://forum.xda-developers.com/showthread.php?t=2030758
if you dont follow it it will bootloop
incase of bootloop
use this in odin
http://forum.xda-developers.com/showthread.php?t=2227982
I 've tried pda rescued but i got an error
2 day's later i have same problem
you have to way to fix it
1-
Originally Posted by Callintz96 View Post #72 Link
It work! I'll repeat what i've done:
- Go to download mode
- Flashed recovery 6.2.0.8 and while pressing volup+voldown+home
- Got Ramdump mode, power off removing the battery
- Go to download mode again, and flashed recovery again without volup+voldown+home
- Pressed recovery buttons until it power off and after that it power on in recovery!
this your trying
2 see this
2 day's later i have same problem
you have to way to fix it
1-
Originally Posted by Callintz96 View Post #72 Link
It work! I'll repeat what i've done:
- Go to download mode
- Flashed recovery 6.2.0.8 and while pressing volup+voldown+home
- Got Ramdump mode, power off removing the battery
- Go to download mode again, and flashed recovery again without volup+voldown+home
- Pressed recovery buttons until it power off and after that it power on in recovery!
Click to expand...
Click to collapse
i've tried that and... It Works!!!! Thank You very much!
Dinepada said:
i've tried that and... It Works!!!! Thank You very much!
Click to expand...
Click to collapse
good newa
IKalam82 said:
:crying:
So I was in CM 10 and I want to install Modern Combat 4 with 1GB of data. SO, I have to do a swap first because oir internal storage is only 0.90 GB (CMIIW). After I edit the vold.ftab file and then I reboot the phone. But, it won't go to home screen. The only thing I can see is the SAMSUNG LOGO and the Galaxy Mini 2 logo. I think by reinstall CM10 via recovery would fix it. The problem is it won't go to recovery. When I trying to press Power + Up + Down + Menu, it do nothing. It even won't boot up
I have installed STOCKROM via Odin. But I still got a bootloop. Maybe cause the /system of CM10 is still inside.
Click to expand...
Click to collapse
Go in recovery mode flash CWM and reinstall CM10
boot into recovery and clear cache and data before you flash new rom otherwise you may get bootloop
Do this:
turn off phone
vol- + turn on (like if you want to go to Download mode)
now home, vol- and fast vol+
congratulation you are in recovery !
Hello,
my Galaxy Note GT-N7000 became unbootable after installing latest Cyanogenmod 10.1 update.
I use it to organize myself and I need it back as fast as possible.
I need your help and googeling was unsuccessful.
I hope it is possible to rescue my phone because I dont have much money to buy another phone.
Thanks a lot!
XXY
TheXXY said:
Hello,
my Galaxy Note GT-N7000 became unbootable after installing latest Cyanogenmod 10.1 update.
I use it to organize myself and I need it back as fast as possible.
I need your help and googeling was unsuccessful.
I hope it is possible to rescue my phone because I dont have much money to buy another phone.
Thanks a lot!
XXY
Click to expand...
Click to collapse
can you access recovery mode (volume up+home+power), or download mode (volume down+power+home button)?
I had the exactly same problem like him. But..
treacherous_hawk said:
can you access recovery mode (volume up+home+power), or download mode (volume down+power+home button)?
Click to expand...
Click to collapse
...But , i could access to Download Mode *(Volume Down+Power+Home) , I couldn't get access to Recovery Mode only *(it turns Black Screen & keep me waiting so long) .
I thought problem solves if I couldn't change another Custom Rom , but i can't even BOOT into recovery mode.
THANKS Brothers for solving here, THanks THanks. (I'm urgent for it too..)
Current Rom I hooking is:
Carbon0825
treacherous_hawk said:
can you access recovery mode (volume up+home+power), or download mode (volume down+power+home button)?
Click to expand...
Click to collapse
Download mode: yes
Recovery mode: no
If i had had access to the Recovery mode i wouldnt have startet this thread...
Im absolutly helpless and i cant find a guide which tells me how to reset my phone only with the download mode...
Thanks for replying!
XXY
TheXXY said:
Download mode: yes
Recovery mode: no
If i had had access to the Recovery mode i wouldnt have startet this thread...
Im absolutly helpless and i cant find a guide which tells me how to reset my phone only with the download mode...
Thanks for replying!
XXY
Click to expand...
Click to collapse
Flash philz kernel (.tar) from pc odin while in download mode (latest version). See if you can get into recovery, if you can, download and put the CM rom+gapps on external sd card, flash without any wipes from recovery or if you did take any nandroid backup you can restore that from philz kernel.
treacherous_hawk said:
Flash philz kernel (.tar) from pc odin while in download mode (latest version). See if you can get into recovery, if you can, download and put the CM rom+gapps on external sd card, flash without any wipes from recovery or if you did take any nandroid backup you can restore that from philz kernel.
Click to expand...
Click to collapse
ok... i read though these threads but i dont know how to install philz kernel...
i tried flashing it with odin but the only thing i noticed was that the binary counter increased...
can you tell me step by step what i have to do?
i know that is awful to do...
if you dont whant to write and tell it me than add me in skype: xxyababx12345
Thanks!
XXY
after you have flashed Philz kernel... power off the device... and try to boot into recovery.
TheXXY said:
ok... i read though these threads but i dont know how to install philz kernel...
i tried flashing it with odin but the only thing i noticed was that the binary counter increased...
can you tell me step by step what i have to do?
i know that is awful to do...
if you dont whant to write and tell it me than add me in skype: xxyababx12345
Thanks!
XXY
Click to expand...
Click to collapse
Why should he write it in private? I bet there are several people (including me) sitting in threads like this waiting for a clear answer from people who know what to do.
TheXXY said:
ok... i read though these threads but i dont know how to install philz kernel...
i tried flashing it with odin but the only thing i noticed was that the binary counter increased...
can you tell me step by step what i have to do?
i know that is awful to do...
if you dont whant to write and tell it me than add me in skype: xxyababx12345
Thanks!
XXY
Click to expand...
Click to collapse
download philz kernel from:
http://forum.xda-developers.com/showthread.php?t=1901191
download the one that says .tar instead of .zip. put the phone into download mode. Open PC odin, connect phone to pc, COM ID should light up in yellow with some number. click on PDA and choose the .tar file and click on start. once it is finished, reboot into recovery and see if it works. You can fix the counter and yellow triangle later with Triangle away application.
treacherous_hawk said:
download philz kernel from:
http://forum.xda-developers.com/showthread.php?t=1901191
download the one that says .tar instead of .zip. put the phone into download mode. Open PC odin, connect phone to pc, COM ID should light up in yellow with some number. click on PDA and choose the .tar file and click on start. once it is finished, reboot into recovery and see if it works. You can fix the counter and yellow triangle later with Triangle away application.
Click to expand...
Click to collapse
Is the Kernel version essential? Since Philz v5.11.2 has several Kernels you can choose from, where as you cannot check which one you have running since the phone does not boot anymore.
correct , you're right!
diwako said:
Why should he write it in private? I bet there are several people (including me) sitting in threads like this waiting for a clear answer from people who know what to do.
Click to expand...
Click to collapse
still waiting for a clear answer to proceed the steps.
Philz Kernel may need a LINK here. maybe URL ?
THanks ALL ! feel that solutions are near now.
as you cannot check, you can download the one for your region, check on sammobile.com/firmwares for which one is for your region and i already gave the link to the philz kernel, i wont post the direct url for the file.
Basically got my phone to boot, CWM is still broken, anyway to work with this?
http://i.imgur.com/LahUi87.png
diwako said:
Basically got my phone to boot, CWM is still broken, anyway to work with this?
http://i.imgur.com/LahUi87.png
Click to expand...
Click to collapse
read from last post here and continue:
http://forum.xda-developers.com/showthread.php?t=2386292&page=27
One problem: i dont know which kernel i have...
and i dont understand this:
http://forum.xda-developers.com/showpost.php?p=31911656&postcount=2
where can i find my kernel id?
Thanks!
XXY
TheXXY said:
One problem: i dont know which kernel i have...
and i dont understand this:
http://forum.xda-developers.com/showpost.php?p=31911656&postcount=2
where can i find my kernel id?
Thanks!
XXY
Click to expand...
Click to collapse
It doesn't matter which kernel you flash, you're just flashing to give you recovery and then you can flash cm and gapps. It won't boot, it's not supposed to.
Sent from my GT-N7000 using XDA Premium 4 mobile app
SpyderTracks said:
It doesn't matter which kernel you flash, you're just flashing to give you recovery and then you can flash cm and gapps. It won't boot, it's not supposed to.
Sent from my GT-N7000 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
ok... i flashed the kernel: PhilZ-cwm6-DDLSC-ODD-5.11.2.tar.md5
and tried to boot into recovery mode.
the samsung logo with triangle flashed up for a half a second and i released my fingers from the keys
and then the logo show up again and nothing else happened...
is it possible to reset my phone completely? i only need a bootable phone for now...
Thanks!
XXY
Not sure I'm in the same boat...
is anyone seeing the same as I am - I also can't boot into Recovery since nightly 20130824. I can boot into Download mode... and... I can still boot into my current CM10.2 nightly (20130824)!!!
I've tried reflashing CWM using ROM Manager, even a few times... but nothing changes. Trying to get into recovery using VolUp+Home+Pwr doesn't work (after Samsung GT-N7000 white text... blackscreen (which I can see is still 'on'). If I try to boot into recovery using Rom Toolbox or similar, it behaves the same and I can only get it to reboot into the ROM once I've pulled the battery out and then put it back in and connected to a charger so the battery charging icon shows... which somehow clears the 'boot into recovery' flag somewhere.
Very concerned... saw something in the changelogs back at 20130824 about recovery fixes and wondered if this might happen. The first time I got it to boot back into the ROM something wasn't quite right with the internal/external SD mounts... all my ringtones and alerts etc. were reset to just numbers (e.g. 40125) which actually happens more often than I expect... but this time I couldn't find the ones I usually use in the selection list.
I rebooted with SD card out... then re-inserted it... and then things went back to how they should be and I could see and select my preferred tones again.
Have tried booting into Recovery via app, via hw keys... with SD card in, SD out... SIM card in... SIM out... both SD and SIM out... there's just no way into recovery.
Using ROM Manager I also tried to setup the alternative Recovery (TWRP) but that also gets stuck with the message 'ROM Manager has been set up to use your existing recovery installation'. but same behaviour when trying to boto into recovery.
I've also used Android Root Toolkit to try save/protect Root... Restore Root.. etc. but to no avail.
Any ideas... please?
EDIT: Thanks for the Odin3 / PhilZ Kernel advice - that seemed to work.
Question: Now that I've got back to recovery and updated to nightly of 20130826, did I overwrite PhilZ kernel?
yes
Yes,
ideas:
Read the rom thread, fixes there
So hear it goes i had a flashed galaxy noted gt n7000 which was running the flashed ultimate jellybean rom .Well smart me had done this following
-formatted my external sd card within the phone with all the root stuff/roms in it
so i wanted to flash my stock rom
went into recovery and did a factory reset and when i wanted to go find the rom to flash it was obviously gone i decided to reboot and i am stuck on the galaxy note logo
i got bricked i guess?
anybody can help me?
You just did the factory reset or any other formats like system?
sherazzie said:
So hear it goes i had a flashed galaxy noted gt n7000 which was running the flashed ultimate jellybean rom .Well smart me had done this following
-formatted my external sd card within the phone with all the root stuff/roms in it
so i wanted to flash my stock rom
went into recovery and did a factory reset and when i wanted to go find the rom to flash it was obviously gone i decided to reboot and i am stuck on the galaxy note logo
i got bricked i guess?
anybody can help me?
Click to expand...
Click to collapse
yes, you bricked your devise. search for a thread which will unbrick the devise.
pls note, the devise will not work properly as before, it will have many issues.
but the devise will run if you follow the instruction carefully.
I don't think the device is bricked. Put some ROM in the external SD card and boot into recovery and flash again.
nokiamodeln91 said:
You just did the factory reset or any other formats like system?
Click to expand...
Click to collapse
i think i did facotry reset and than unmounted some stuff
sherazzie, you could alternatively flash a stock firmware via PC ODIN, by booting your device into Download Mode.
:silly:
nokiamodeln91 said:
I don't think the device is bricked. Put some ROM in the external SD card and boot into recovery and flash again.
Click to expand...
Click to collapse
i have my stock rom tried flashing it and when i click on the zip the installation aborted
try to download official rom from sammobile or anywhere else.. put your phone to download mode and flash using pc odin.. this might work..
fautiq said:
try to download official rom from sammobile or anywhere else.. put your phone to download mode and flash using pc odin.. this might work..
Click to expand...
Click to collapse
how do you enter download mode ?? is is volume up home power like recovery
odin dosent recognize all drivers installed btw
OMG, just put any rom on your external SD..reboot to recovery (don't format your external again)...and flash rom.
just download official firmware from sammobile and go to download mode(volume down+home+power) flash it with odin..
dont worry i dont think ur mobile is bricked...
May do this
sherazzie said:
So hear it goes i had a flashed galaxy noted gt n7000 which was running the flashed ultimate jellybean rom .Well smart me had done this following
-formatted my external sd card within the phone with all the root stuff/roms in it
so i wanted to flash my stock rom
went into recovery and did a factory reset and when i wanted to go find the rom to flash it was obviously gone i decided to reboot and i am stuck on the galaxy note logo
i got bricked i guess?
anybody can help me?
Click to expand...
Click to collapse
I don't think so that u have bricked your phone
Just put the phone in download mode and flash Factory Rom with Odin .. it will work
sherazzie said:
i have my stock rom tried flashing it and when i click on the zip the installation aborted
Click to expand...
Click to collapse
You cannot flash the stock from using recovery. extract it to tar.md5 and then flash it using odin. If odin is not recognized, then use any custom rom. Make sure you have CWM recovery when booting into recovery mode.