How to backup the stock Kernel ? Thanks... - Galaxy Ace S5830 Q&A, Help & Troubleshooting

Hi there..
My S5830 has "sleep of death" and I sent it for repairing.
Samsung official service has just give me the device, and the only said "We have updated your Kernel".
The thing is that Kernel version shown on Settings is JUST THE SAME that before that "repairing", the XWKTM compilation Stock Kernel:
2.6.35.7-perf-CL1073924 [email protected] #1
Is there any way to backup this Kernel in order to compare with a fresh XWKTM Kernel?
I thing I have been fooled.....

just do backup on cwm ... then search the file boot.img that will be your kernel

Perfect, Thank you

skorzo said:
Perfect, Thank you
Click to expand...
Click to collapse
Take care
Sent from my GT-S5830 using xda premium

hey i currenly did a full cwm backup and im about to flash this kernel but i'm just curious i have s5839i would it make a difference ? do i have to edit a file somewhere?

Andraxo said:
hey i currenly did a full cwm backup and im about to flash this kernel but i'm just curious i have s5839i would it make a difference ? do i have to edit a file somewhere?
Click to expand...
Click to collapse
Your phone is different from 5830, 5830L and 5830B.
But most things are compatible with 5830i and 5830m. Look in the proper forun, if you flash any kernel or rom for 5830 you might brick your device.

Related

[ROM][Stock GB 2.3.7]Stock Apanda rom

Here's the stock Apanda rom Android GB 2.3.7. I couldn't know anything about this rom as it won't let me pass the lockscreen. Lockscreen was similar to the spice stock rom. Don't know if it is any different.
Mod : edit removed this link
I flashed it but seems like the touch screen is not compatible with Spice mi 410.
[Edit] Flash 0.35 kernel(sharp/tj) to make touchscreen work -> Thanks to Abenagiel.
This didn't seem to be any better than sharp rom.
Before flashing this rom be sure to backup your imei. Me and Demonskill had problems of unknown imei number when we flashed the rom and tried to revert back using cwm restore. My personal suggestion, before you do cwm restore make sure to flash tj's rc3. Find more info about imei backup using 5iromtoolbox take a look at post by http://forum.xda-developers.com/showpost.php?p=28096182&postcount=3. Thanks to LibertyMonger
Steps to flash this rom:
(1) Go to download mode and Flash this rom via SUT.
(2) Go to download mode and place the recovery.img from tj_style for the new kernel 0.35
(3) Place this 0.35 sharp kernel on sd card https://www.dropbox.com/s/c2myh6s2kgb9wi6/sharp_Kernel.zip
(4) Flash the zip via recovery.
Mirrors for the rom, recovery and 0.35 kernel can be found in the post. Thanks to aloklike- MOD edit: removed link
MOD EDIT : ok guys and the OP
i see a lot of problems i think for the safety of all i am closing this thread and removing the links. if everything is ok PM me and ill open this thread
yup touchscreen doesn't work..
kernel problem..
flash with sharp rom or andro-id rc3 kernel,, and touchscreen will work again..
Sent from my FIH-FB0 using xda
abenagiel said:
yup touchscreen doesn't work..
kernel problem..
flash with sharp rom or andro-id rc3 kernel,, and touchscreen will work again..
Sent from my FIH-FB0 using xda
Click to expand...
Click to collapse
Does that mean flashing 0.35 kernel will fix the touchscreen. and make the rom work i will try
nayneshdev said:
Does that mean flashing 0.35 kernel will fix the touchscreen. and make the rom work i will try
Click to expand...
Click to collapse
yup.. work for me..
Sent from my FIH-FB0 using xda
abenagiel said:
yup.. work for me..
Sent from my FIH-FB0 using xda
Click to expand...
Click to collapse
hi
sorry slightly confused r u saying if we flash RC3 or sharp and then flash this rom it will work or What
haree said:
hi
sorry slightly confused r u saying if we flash RC3 or sharp and then flash this rom it will work or What
Click to expand...
Click to collapse
not like that..
we need to replace the stock kernel with rc3 kernel or sharp kernel to make the touchscreen work..
or maybe we can replace touchscreen files with rc3 or sharp (never try this)
Sent from my FIH-FB0 using xda
abenagiel said:
not like that..
we need to replace the stock kernel with rc3 kernel or sharp kernel to make the touchscreen work..
or maybe we can replace touchscreen files with rc3 or sharp (never try this)
Sent from my FIH-FB0 using xda
Click to expand...
Click to collapse
hi
sorry still confused ok simple question
im right now on the recent kernal ie im using MatBlks CM9
now if i flash this rom will it work
Edit : got my answer on the 1st page not trying ill wait for ur new ROM
its working .....
----deleted----
the file has been deleted, can u re-upload it..
thanks
[ROM]
----deleted----
Op forgot to mention in thread title this is Stock GB 2.3.7
to Install
Flash nb0 with SUTLR
Replace recovery with CWM5.XX
flash sharp Kernel with CWM
reboot
----deleted----
aloklike said:
hey mattBLK,
which kernel are you using with this rom,how is battery life on this rom ..........
Click to expand...
Click to collapse
not sure what original name was i renamed it? i was trying to find in a separate thread but noone posted so i found this.. it has OC upto>1600Mhz and smartassV2. what is the other kernel like that was posted here?
Just noticed the subtle changes in settings with 2.3.7 with added cell broadcast
aloklike said:
uploading on mediafire ..... plz wait .....
here it is ....
Apanda 2.3.7 :: http://www.mediafire.com/?69xvxkbkdcvy6t9
recovery :: http://www.mediafire.com/?dpphpw3r8z3qhmp
kernel :: http://www.mediafire.com/?2w67p3wot3x9w3t
Steps to install :
1. put kernel zip in sdcard
2. install rom via SUT (erase user data option)
3. go to donload mode and replace recovery file
4. install kernel.zip via cwm
Click to expand...
Click to collapse
Try this also, Kernel from Abenagiel's GingerMia V1 it comes with more governor.
Hit Thanks if I help
how stable is this stock rom running on other. 35 kernels like mia and rc3?
got icv problem? or any bugs?
cheezzzz said:
how stable is this stock rom running on other. 35 kernels like mia and rc3?
got icv problem? or any bugs?
Click to expand...
Click to collapse
very stable no fc no bugs for me with the kernel im using, camera & camcorder still zooms.. just use another launcher and get rid of all the bloatware/5keyboards
Guess I will have to try this, hope it is more stable than Sharp ROM. Sharp ROM has been rebooting and just had an awful freezeup while playing a basic game. Lost sensor functionality and had to pull battery. I have no luck with any ROM really wish we had one "go-to ROM" that is fully stable.
Actually this ROM is for K41 devices, not for FB0/1/3 devices. But since K41 devices is using similiar hardware with FB0, so this ROM is still compatible with our devices
Sent from my W700
tj_style said:
Actually this ROM is for K41 devices, not for FB0/1/3 devices. But since K41 devices is using similiar hardware with FB0, so this ROM is still compatible with our devices
Sent from my W700
Click to expand...
Click to collapse
(0_0!)
wow the master was here..
there was FB1-FB3 devices??
#tumbennongolom??
tj_style said:
Actually this ROM is for K41 devices, not for FB0/1/3 devices. But since K41 devices is using similiar hardware with FB0, so this ROM is still compatible with our devices
Sent from my W700
Click to expand...
Click to collapse
after flashing this rom i am having issues with unknown imei number.so it seemed like i had lost my imei number, but after flashing rc3 i again recovered it this is the reason why i removed the link but couldnt post this information sooner then this. Those who are using this please backup your imei first using 5iromtoolbox app available on xda also on ideos x5 forum.
Sent from my Desire HD using xda app-developers app

[Q] How To for the Galaxy Note GT-N7000

Hello,
I am new to the XDAdevelopers forum and don't have much knowledge of rooting or installing customs roms to Android phones.
I currently own the Galaxy Note GT-N7000 and just looking around some videos I would love to have some customs rom installed on my phone, such as the new Jelly Bean roms that are out now.
I would love to know on how to root my Galaxy Note if there is a Noob Tutorial for rooting the galaxy note and maybe a Noob Tutorial on how to install Jelly Bean rom that is currently out (any suggestion on which rom would be great)
As I said I am a noob and don't have much knowledge on how to mod your android phones and any help would be greatly appreciated
FYI: Looked around the forums for the while, I couldn't find anything simple enough, I bet there is somewhere in the forum, not sure if I was looking correctly >.<
Here is a guide to root your phone
http://forum.xda-developers.com/showthread.php?t=1329360
After you root your phone,flash a safe kernel like hydracore or speedmod kernel and then flash any jb rom
Jellycore and paranoid android are two jb roms that i feel the best
rajsekhar.300 said:
Here is a guide to root your phone
http://forum.xda-developers.com/showthread.php?t=1329360
After you root your phone,flash a safe kernel like hydracore or speedmod kernel and then flash any jb rom
Jellycore and paranoid android are two jb roms that i feel the best
Click to expand...
Click to collapse
Thanks for replying do you have any links to the Kernals and JB roms ? and if there is any tutorial for them too
Thanks again for your time.
Hydracore
forum.xda-developers.com/showthread.php?t=1749863
Jellycore rom
forum.xda-developers.com/showthread.php?t=1872921
rajsekhar.300 said:
Hydracore
forum.xda-developers.com/showthread.php?t=1749863
Jellycore rom
forum.xda-developers.com/showthread.php?t=1872921
Click to expand...
Click to collapse
Does my version of Android Matter for these upgrades ?
I have
Android Version: 4.0.3
Baseband Version: N7000XXLPT
Georific said:
Does my version of Android Matter for these upgrades ?
I have
Android Version: 4.0.3
Baseband Version: N7000XXLPT
Click to expand...
Click to collapse
No problem with your version, they works for all 4.0.X roms. here is complete guide for flashing.
jeetu1981 said:
No problem with your version, they works for all 4.0.X roms. here is complete guide for flashing.
Click to expand...
Click to collapse
Thank you so god damn much for the HELP! this is exactly what I needed one problem though it says I need MobileOdenPro :/ I really can't purchase apps of the market is that a problem ? for the Kernel
No.After you flash the kernel,you can install jb rom through cwm
Georific said:
Thank you so god damn much for the HELP! this is exactly what I needed one problem though it says I need MobileOdenPro :/ I really can't purchase apps of the market is that a problem ? for the Kernel
Click to expand...
Click to collapse
There is a free version for people who cannot buy from market, look here or you can also use k-tools for flashing kernel its free on market, extract the kernel to zimage and put on root of internal SD and then flash it using k-tools.
jeetu1981 said:
There is a free version for people who cannot buy from market, look here or you can also use k-tools for flashing kernel its free on market, extract the kernel to zimage and put on root of internal SD and then flash it using k-tools.
Click to expand...
Click to collapse
Do I need any add any other roms to my phone before I put a Jelly Bean rom onto my phone ?
Georific said:
Do I need any add any other roms to my phone before I put a Jelly Bean rom onto my phone ?
Click to expand...
Click to collapse
As long as you are on any safe kernel you can flash any JB rom, no matter if you are on any TW ICS, GB or CM9/10 roms. I am on CM10 right now and flashed it directly on stock LRQ ICS with Speedmod kernel.
jeetu1981 said:
There is a free version for people who cannot buy from market, look here or you can also use k-tools for flashing kernel its free on market, extract the kernel to zimage and put on root of internal SD and then flash it using k-tools.
Click to expand...
Click to collapse
Mobile ODIN Lite says It requires an addon and takes me to the link you posted :/ ?
Georific said:
Mobile ODIN Lite says It requires an addon and takes me to the link you posted :/ ?
Click to expand...
Click to collapse
yes, it needs some files to be downloaded manually, mobile odin pro downloads them automatically. Why don't you use K-tools, its free and very easy to use. i flashed Speedmod last time using k-tools only.
Georific said:
Mobile ODIN Lite says It requires an addon and takes me to the link you posted :/ ?
Click to expand...
Click to collapse
You can find those additional files in the same link
Scroll down few posts and you can find it
jeetu1981 said:
yes, it needs some files to be downloaded manually, mobile odin pro downloads them automatically. Why don't you use K-tools, its free and very easy to use. i flashed Speedmod last time using k-tools only.
Click to expand...
Click to collapse
I got it to work for Odin I added the Kernal Hydra do I just press Flash Firmware ? Please REply ASAP
rajsekhar.300 said:
You can find those additional files in the same link
Scroll down few posts and you can find it
Click to expand...
Click to collapse
I managed to get Odin working I added the kernel Hydra do i just go to the bottom and click Flash Firmware ?
Georific said:
I managed to get Odin working I added the kernel Hydra do i just go to the bottom and click Flash Firmware ?
Click to expand...
Click to collapse
Yes, select kernel (.tar or zimage format) in kernel field and then hit flash firmware. make sure to check if the kernel is flashed after restart before doing any wipes and all
bad or good...
jeetu1981 said:
Yes, select kernel (.tar or zimage format) in kernel field and then hit flash firmware. make sure to check if the kernel is flashed after restart before doing any wipes and all
Click to expand...
Click to collapse
I followed every step on the link you gave me on how to get jellybeanitwas sucessful when installed it bootup but its been in the boot upscreen for a while it just says cyanogen mod. Like 20 min boot up or more is this bad.... help!!!!
Georific said:
I followed every step on the link you gave me on how to get jellybeanitwas sucessful when installed it bootup but its been in the boot upscreen for a while it just says cyanogen mod. Like 20 min boot up or more is this bad.... help!!!!
Click to expand...
Click to collapse
boot in cwm recovery and do a full wipe, this should solve the problem or else reflash the JB rom.
its works
jeetu1981 said:
boot in cwm recovery and do a full wipe, this should solve the problem or else reflash the JB rom.
Click to expand...
Click to collapse
The full wipe worked thanks so much man appreciate it for everything

[Q] Best Kernel / Rom combination for the I9070

Hello,
So after getting some knowledge of the things (thanks Shut_Down :good, I was wondering which is the best combination for this phone?
Right now I am running the stock ROM and kernel.
Will the new official JB upgrade also change kernel or just ROM?
Since people here have already tried different combinations, which combinations have you found that give good, consistent and fast running?
Thanks!
R: [Q] Best Kernel / Rom combination for the I9070
I use stock ROM with thunderzap 3.5 kernel
Sent from my GT-I9070 using xda premium
KINGbabasula said:
I use stock ROM with thunderzap 3.5 kernel
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
chucky-bean v5 + cocore-E 2.9 nighly(CWM)
Chucky Bean v6; Cocore_E 2.9 CWM
Envoyé depuis mon GT-I9070
Well, I did't expect this...
Thanks for your replys!
Funny thing is that each of you have a different combination.
Any one actually did testing which combo is better? Or maybe i sould ask, why are you using he combinations you wrote?
KINGbabasula said:
I use stock ROM with thunderzap 3.5 kernel
Click to expand...
Click to collapse
Same here. Stock JB LQ4 + ThunderZap 3.5.
So I am guessing I will upgrade to the stock JB ROM (till there will be a JetMod version of JB).
1) Which would be a better kernel set CoCore or ThunderZap?
2) I am right now still running the stock GB ROM.
What would be the right upgrade process kernel update then rom, or rom and then kernel?
The reason I am thinking kernel first is because I still don't have a custom recovery (using the stock brand) so i can't backup or load new roms.
What do you think?
Thanks!
Одг: [Q] Best Kernel / Rom combination for the I9070
YMatrix said:
So I am guessing I will upgrade to the stock JB ROM (till there will be a JetMod version of JB).
1) Which would be a better kernel set CoCore or ThunderZap?
2) I am right now still running the stock GB ROM.
What would be the right upgrade process kernel update then rom, or rom and then kernel?
The reason I am thinking kernel first is because I still don't have a custom recovery (using the stock brand) so i can't backup or load new roms.
What do you think?
Thanks!
Click to expand...
Click to collapse
Try both and see what firs you better. And about order, you can install ROM with temp. CWM, but I suggest you use permanent, with custom kernel. So first kernel, than ROM.
Sent from Galaxy S Advance
Thanks mate! Again you helped.
If I install the stock ROM will I be able to get it in my local language (Hebrew), or do I need to download a specific ROM that is already in my language?
YMatrix said:
Thanks mate! Again you helped.
If I install the stock ROM will I be able to get it in my local language (Hebrew), or do I need to download a specific ROM that is already in my language?
Click to expand...
Click to collapse
Hm, on this Russian JB there is no Hebrew as I see. So if you want it you should wait for release for your country or any with your language.
shut_down said:
Hm, on this Russian JB there is no Hebrew as I see.
Click to expand...
Click to collapse
Where is this information posted? Because I checked sammobile, and I couldn't even find the GB version of my language
YMatrix said:
Where is this information posted? Because I checked sammobile, and I couldn't even find the GB version of my language
Click to expand...
Click to collapse
we actually have the ROM in our phone bro!
Brainiac.shri said:
we actually have the ROM in our phone bro!
Click to expand...
Click to collapse
You mean that each ROM usually supports all the languages?
YMatrix said:
You mean that each ROM usually supports all the languages?
Click to expand...
Click to collapse
a lot. but in this case hebrew isnt listed sorry!
Before installing a ROM is there an option to view which languages it supports?
Одг: [Q] Best Kernel / Rom combination for the I9070
YMatrix said:
Before installing a ROM is there an option to view which languages it supports?
Click to expand...
Click to collapse
No, unless dev write it on its thread.
Sent from Galaxy S Advance
OK, Thanks.
Last question, when just changing kernel, do I need to do any wipes / resets (I have read about dalvik cache, factory wipes etc.) ? Or is that just for when installing new ROM's?
YMatrix said:
OK, Thanks.
Last question, when just changing kernel, do I need to do any wipes / resets (I have read about dalvik cache, factory wipes etc.) ? Or is that just for when installing new ROM's?
Click to expand...
Click to collapse
roms only.
Hey sir plz help me...
I have samsung s advance... i9070
I flash it with odin to xxlpz 4.1.2
But its has so many buggs so I go to Samsung care to flash it back to 2.3
But they are saying my binaries are increased... so need to change my pci or bord...
And when I try to again update to ddl4 fremware it shows successful but phone was not starting...
Plz help me out sir..
Одг: [Q] Best Kernel / Rom combination for the I9070
Rahul125125 said:
Hey sir plz help me...
I have samsung s advance... i9070
I flash it with odin to xxlpz 4.1.2
But its has so many buggs so I go to Samsung care to flash it back to 2.3
But they are saying my binaries are increased... so need to change my pci or bord...
And when I try to again update to ddl4 fremware it shows successful but phone was not starting...
Plz help me out sir..
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2100642
Sent from Galaxy S Advance

[Q] GT-N7000 Stock ITV Jelly Bean, Philz Or Hydracore?

Hi everyone!
1st: Sorry for my english :silly:
2nd: I need help, i'm very very noob at Android, i recently bought a new Samsung Galaxy Note with ICS 4.0.4 Software Unbrand... The question is, i want to install 4.1.2 ITV (N7000ITVLS4.... ITALY) with odin and later i wanna instal a safe kernel but i don´t know which one... Philz or Hydracore? Which one is better? and which one will able me to unbrand my GN in the case of loosing the Software Unbrand?
3rd: How i install the kernel, i really don´t understand very well the procedure! I have fear about bricking mi new GN...
Thanks !
R: [Q] GT-N7000 Stock ITV Jelly Bean, Philz Or Hydracore?
MarianoQT said:
Hi everyone!
1st: Sorry for my english :silly:
2nd: I need help, i'm very very noob at Android, i recently bought a new Samsung Galaxy Note with ICS 4.0.4 Software Unbrand... The question is, i want to install 4.1.2 ITV (N7000ITVLS4.... ITALY) with odin and later i wanna instal a safe kernel but i don´t know which one... Philz or Hydracore? Which one is better? and which one will able me to unbrand my GN in the case of loosing the Software Unbrand?
3rd: How i install the kernel, i really don´t understand very well the procedure! I have fear about bricking mi new GN...
Thanks !
Click to expand...
Click to collapse
You should first install a hydracore kernel on your actual ics (but maybe it is no need), then flash the new jb rom lsz (the one you said) and after you can choose to flash or philz kernel (v 4.88.2) or speedmod kernel (k5-1). Both are goods! To flash all this, you just need a simple program called Odin
If you go in original android development section, you will find all that you need! Just read carefully the main threads, and all will go fine. There are also screenshots attached to the posts, so it will be more clear. Btw if you have some doubts, post here or pm me (sono italiano anche io )
Edit: ops I just saw you're not Italian
Sent from my GT-N7000 using xda premium
Bad-Pixel said:
Edit: ops I just saw you're not Italian
Click to expand...
Click to collapse
No, he's from Argentina. But recent events make this misunderstanding acceptable (sorry for OT, couldn't resist).
R: [Q] GT-N7000 Stock ITV Jelly Bean, Philz Or Hydracore?
ThaiDai said:
No, he's from Argentina. But recent events make this misunderstanding acceptable (sorry for OT, couldn't resist).
Click to expand...
Click to collapse
Lol yes it's the same thing I thought about
Btw in that procedure, it may be safe, flashing the lsz rom directly without flash a safe kernel before, by odin ofc? Or we absolutely must flash a safe kernel before to flash anything by odin?
Sent from my GT-N7000 using xda premium
Thanks
Bad-Pixel said:
Lol yes it's the same thing I thought about
Btw in that procedure, it may be safe, flashing the lsz rom directly without flash a safe kernel before, by odin ofc? Or we absolutely must flash a safe kernel before to flash anything by odin?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Thanks for the answer ! I just installed successfully the Italian version of JB !
PD: No, i'm from Buenos Aires, But i'm an Italian Citizen, i have double citizenship...
R: [Q] GT-N7000 Stock ITV Jelly Bean, Philz Or Hydracore?
Nice dude
Glad it worked! If I can give you a personal advice:
Install speedmod kernel (actual is k5-1) using odin, download triangle away (actual should be 2.75.. Search it here on xda, by chainfire) install it and use it to remove the yellow alert triangle at the boot time (please read carefully how to use that apk). Now you got a safe kernel, root permissions and very good performance / stability. Ofc if you do that, you "temporarily" will lose the warranty (cuz of the root and the custom kernel). If you don't want, just keep your note as it is now
Regards!
Sent from my GT-N7000 using xda premium
Bad-Pixel said:
Nice dude
Glad it worked! If I can give you a personal advice:
Install speedmod kernel (actual is k5-1) using odin, download triangle away (actual should be 2.75.. Search it here on xda, by chainfire) install it and use it to remove the yellow alert triangle at the boot time (please read carefully how to use that apk). Now you got a safe kernel, root permissions and very good performance / stability. Ofc if you do that, you "temporarily" will lose the warranty (cuz of the root and the custom kernel). If you don't want, just keep your note as it is now
Regards!
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I will keep that in mind... But i want to install CM10.1 in mi N7000, my cousin(he has a Galaxy S3 with Philz 4.88.5 and CM10.1) he recommended it to me... I really want the performance/interface given by CyanoGen Mod...
What do you think? Will CM10.1 + Philz Recovery give me a remarkable efficiency that i'm looking for?
Will you recommend my Hydracore Kernel?
R: [Q] GT-N7000 Stock ITV Jelly Bean, Philz Or Hydracore?
MarianoQT said:
What do you think? Will CM10.1 + Philz Recovery give me a remarkable efficiency that i'm looking for?
Will you recommend my Hydracore Kernel?
Click to expand...
Click to collapse
You can't use philz kernel (I'm talking about our galaxy note at least) on any other rom than a Touchwiz based. So unfortunately you can't use it on cm10.1 :/
When I used a cm based, usually I kept the original cm kernel, Btw some of new kernels on xda are interesting! So maybe just try them
For now I'm on ultimate rom, and I'm planning to switch to another one soon (I'm flasholic...)
Sent from my GT-N7000 using xda premium
Bad-Pixel said:
You can't use philz kernel (I'm talking about our galaxy note at least) on any other rom than a Touchwiz based. So unfortunately you can't use it on cm10.1 :/
When I used a cm based, usually I kept the original cm kernel, Btw some of new kernels on xda are interesting! So maybe just try them
For now I'm on ultimate rom, and I'm planning to switch to another one soon (I'm flasholic...)
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Really? Maybe i read wrong ! But there is written that Philz 4.88.5 supports CM10.1 and GT-N7000...
Read This thread http://forum.xda-developers.com/showthread.php?t=2002953
Someone in http://www.Taringa.net recommended me to use Crash Rom with Philz kernel ! And not only one person did that !
What Do You Think? I'm very confused about Android(Kernel/Rom/Recovery)...
PD: I really miss my iPod Touch 4g ! iOS it's heaven for me hahahaha
R: [Q] GT-N7000 Stock ITV Jelly Bean, Philz Or Hydracore?
But dude, that topic is about the galaxy s3 (i9300) and talking about a custom recovery (with few words, the menu from where you install new roms or wipe your note) and not about a kernel. Plus, Dev Crash left our note community some months ago, and his last rom is a jb leak rom Samsung, so I don't recommend you to install it. It's too much old now. Btw, if you wanna some advice about all this story (kernel recovery and other maybe) I advice you to:
First search for some already opened thread, and if you will not any answer to your questions, open a new thread
Sent from my GT-N7000 using xda premium
Auch ! Sorry man ! I had a confusion !
But if you read the Thread there says that it's compatible with N7000... So, i can install Philz 4.88.5 Recovery on my Note !
Reading in the web i found a tutorial of the CM10.1 Official for N7000, i think i will use this ROM in my Note ! What do you think? Any advice?
In the page of CM i found the tutorial... I can't put the link here...
I'm think i will install... CM10.1 4.2.2(Nightly) ROM + Philz 4.88.5 Recovery ! Will this work?
I'm think i will install... CM10.1 4.2.2(Nightly) ROM + Philz 4.88.5 Recovery ! Will this work?
Click to expand...
Click to collapse
Philz kernels only work with Samsung TW roms and no other roms. CM10 has its on kernel or other kernels based on them like DH
nokiamodeln91 said:
Philz kernels only work with Samsung TW roms and no other roms. CM10 has its on kernel or other kernels based on them like DH
Click to expand...
Click to collapse
I said Philz Recovery... With CM10.1 ROM and Kernel !
which Philz recovery are you referring to ? Temp one?
nokiamodeln91 said:
which Philz recovery are you referring to ? Temp one?
Click to expand...
Click to collapse
Philz 4.88.5 Touch CWM 6.0.3.0.... Why?
MarianoQT said:
Philz 4.88.5 Touch CWM 6.0.3.0.... Why?
Click to expand...
Click to collapse
Dont you read? Phil touch recovery + stock kernel is only for touchwiz rom a.k.a stock rom. No cm9 no cm10 or cm10.1. If im not mistaken speedmod kernel is using phil recovery but no touch features it also for stock touchwiz rom. Correct if im wrong
Sent from my GT-N7000 using xda premium
struk in boot
Bad-Pixel said:
You should first install a hydracore kernel on your actual ics (but maybe it is no need), then flash the new jb rom lsz (the one you said) and after you can choose to flash or philz kernel (v 4.88.2) or speedmod kernel (k5-1). Both are goods! To flash all this, you just need a simple program called Odin
If you go in original android development section, you will find all that you need! Just read carefully the main threads, and all will go fine. There are also screenshots attached to the posts, so it will be more clear. Btw if you have some doubts, post here or pm me (sono italiano anche io )
Edit: ops I just saw you're not Italian
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
hi i just want your help pls answer me as soon as possible i installed official 4.1.2 official rom on my note. after that i want to root it and i install philz kernal from cwm. now the phone is not starting not going in recovery mode. only downloading mode. now i dont know waht to do install that rom again or install a kernal first.
altanole said:
hi i just want your help pls answer me as soon as possible i installed official 4.1.2 official rom on my note. after that i want to root it and i install philz kernal from cwm. now the phone is not starting not going in recovery mode. only downloading mode. now i dont know waht to do install that rom again or install a kernal first.
Click to expand...
Click to collapse
Ok resolved
I installed philzkernal matching to my rom via Odin and now is all fine
Sent from my GT-N7000 using xda app-developers app

[Resolved] Stock 4.1.2 Root & ROM

Hi
Just got my N7000 back from service; With just about all the hardware except the screen were replaced, it also returned running the stock ROM (Android 4.1.2, kernel version 3.0.31-1103517, build JZ054K.N7000XXLT5). While the stock Jelly Bean is miles ahead of both the original Gingerbread ROM and the stock ICS ROM, I'd rather root and go back to the CyanogenMod nightlies...
Thing is, between all the "Super Brick" and "eMMC" bugs - I'm a bit scared and terribly confused with witch technique I should use to root and ROM my phone. It sure would be nice if someone could point me to a tried and tested method (preferably a step by step guide) to root and ROM my N7000XXLT5...
Root using Philz kernel. Then you can flash the rom of you choice. For instructions, head over to his thread in the original android development section.
Sent from my GT-I9500 using xda premium
Thanks nokiamodeln91!
I assume you're referring to [PhilZ-cwm6][n7000]. I've looked at this earlier. I've settled on and are comfortable flashing it using the stock recovery method, and the step by step guide (in post #3 of the PhilZ-cwm6 thread) should make this manageable enough...
The problem however is that I'm unsure as to which package/version to download. I've looked at the "What kernel to choose section" in post #2 of the PhilZ-cwm6 thread, but from that information I cannot figure out which kernel matches/is suitable for my device...
As I said, I'm terribly confused by all this...
You need to choose Philz kernel XXLT5
Sent from my GT-I9500 using xda premium
nokiamodeln91 said:
You need to choose Philz kernel XXLT5
Click to expand...
Click to collapse
Thanks again! I've downloaded "PhilZ-cwm6-XXLT5-OXX-5.03.0-signed.zip" and are ready to root/rom my phone!
I guess it freaks me out not knowing/understanding everything. Especially about something as fundamental as the bootloader/OS of my phone. It's a weird feeling reading info like "DDLSC - DXLSE - JPLSB - XXLT5 - ZSLO2" without understanding most it. Also kind of freaks me out that I'm not supposed to use the latest version of a piece of software....
Though, I've had it with the stock rom again and are ready to take my chances! So again; Thank you!
@nokiamodeln91; Just wanted to say thank you!
Rooting with "Philz kernel" is quite possibly the easiest root I've performed. Once I were sure which version/variant to download is nothing to worry about.
So now I'm back to being a happy N7000 user running CyanogenMOD! Only difference being that I'm back to nightlies...
Again; Thanks!
vidvandre said:
It's a weird feeling reading info like "DDLSC - DXLSE - JPLSB - XXLT5 - ZSLO2" without understanding most it.
Click to expand...
Click to collapse
Those are world regions and release dates
Same problem
nokiamodeln91 said:
You need to choose Philz kernel XXLT5
Sent from my GT-I9500 using xda premium
Click to expand...
Click to collapse
Hi Guys, I have the same problem. I dont know which version to download. My droid is runing:
Kernel
3.0.31-1103517
But te Build Number is JZ054K.N7000XXLT9
I couldnt find the XXLT9 it only goes till XXLT6. Any suggestions pls?
Thanks in advace
Razgrizzz said:
Hi Guys, I have the same problem. I dont know which version to download. My droid is runing:
Kernel
3.0.31-1103517
But te Build Number is JZ054K.N7000XXLT9
I couldnt find the XXLT9 it only goes till XXLT6. Any suggestions pls?
Thanks in advace
Click to expand...
Click to collapse
Try to XXLTA version.
Found The XXLT9
nokiamodeln91 said:
Try to XXLTA version.
Click to expand...
Click to collapse
In the mean time I managed to find the XXLT9 but when I tried to install it it s giving me a Signature Verification Failed error. Any ideas?
Use XXLTA
User_99 said:
Use XXLTA
Click to expand...
Click to collapse
Ok Thanks will try that tonight
Thanks a lot for your help guys
User_99 said:
Use XXLTA
Click to expand...
Click to collapse
Hi guys I finaly had some time to try the XXLTA but stil giving me a Signature Verification Failed error!
I downloaded the xxla from here: d-h.st/users/philz_touch/?fld_id=25295#files
and do you know somthing about these files?
goo.im/devs/philz_touch/CWM_Advanced_Edition/n7000/
Thanks in advance
Use odin to flash the kernel. If you intend to root your rom, after flashing the kernel you will need to flash supersu from recovery.
nokiamodeln91 said:
Use odin to flash the kernel. If you intend to root your rom, after flashing the kernel you will need to flash supersu from recovery.
Click to expand...
Click to collapse
Thank you all Guys it worked

Categories

Resources