I have the German LRQ 4.0.4 and want to update to the latest LRT that's out. The software updater offered me the 5MB update and I accepted it, but the CWM Recovery is stopping the update from happening..is there any way I can get my Stock recovery back?
Sent from my GT-N7000 using xda app-developers app
u need to unroot and go back to stock kernel for ota to install.
Get ur version of firmware and flash it thru pc odin
Sent from my GT-N7000 using xda premium
Flash lrq rom and you will get back to stock kernel and gets unrooted
Then download the ota and u will be updated
Dont do factory reset on stock kernel
Related
I wanna ask somthing about galaxy note
Now am running stock 4.0.3 rooted with CF-root and flashed speed mod kernal
Now i want to update my note to stock 4.0.4
With this kernal.
can anyone tell me how step by step?
Thanks 4 all
Sent from my GT-N7000 using xda premium
You will not be able to update via KIES / OTA with your setup (same as mine)
Options are;
- Flash the custom Kernel back in via CWM
- Downgrade to Stock GB and update via KIES / OTA from there then root and add desired kernel
- Flash the 4.0.4 Stock ROM via PC Odin.
Cheers
I was using the same configuration i.e. ICS stock 4.0.3 with speedmod kernel. I updated to 4.0.4 via mobile odin (4.0.4 downloaded from dr.ketan stock rom -german open). Speedmod has eMMC cap erase disable so it is safe to flash via mobile odin from 4.0.3 with speedmod kernel to 4.0.4.
now i m on ics 4.0.4 with speedmod k3-9
Sent from my GT-N7000 using xda app-developers app
chucky5455 said:
I was using the same configuration i.e. ICS stock 4.0.3 with speedmod kernel. I updated to 4.0.4 via mobile odin (4.0.4 downloaded from dr.ketan stock rom -german open). Speedmod has eMMC cap erase disable so it is safe to flash via mobile odin from 4.0.3 with speedmod kernel to 4.0.4.
now i m on ics 4.0.4 with speedmod k3-9
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Nice - I know SpeedMod has the eMMC Cap Erase disabled, I've just never had the balls to test it out
Can anyone tell me the steps to flash 4.0.4 via mobile odin
And should i do factory reset after that
I don't want to lose my apps
Sent from my GT-N7000 using xda premium
romano_ezzat said:
Can anyone tell me the steps to flash 4.0.4 via mobile odin
And should i do factory reset after that
I don't want to lose my apps
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
before anything, just a precaution. Always remember to backup your phone. Now the steps to flash to 4.0.4 thru mobile odin
1. download your stock 4.0.4 ics firmware specific to your region in www.samfirmware.com in your pc or laptop
2. Extract the zip file you've downloaded, it should have the tar.md5 inside. and copy the tar.md5 file to your external sd card.
3. using mobile odin, navigate to OPEN file and go to the destination /folder where you've saved the tar.md5 file (inside your sdcard)
4. In mobile odin, scroll down and tap on Flash fimrware. Hit continue and it will flash your phone after that to the latest stock 4.0.4 ROM.
You don't need to perform a factory reset.
Really thank u man i will do that now
Sent from my GT-N7000 using xda premium
Hi. I hope it is ok to ask something here about icw 4.0.4 instead of posting a new thread...
I have tried the stock rom for open german ics 4.04 and the hongkong ics 4.04 on my galaxy note. I thought international version stock rom should have minor differences only, but it turns out that these two stock roms are quiet different.
Open germany version has pop up video with the old gallery apk.
Hongkong version has NO pop up video but came with a very nice new gallery apk.
I wonder which ics 4.0.4 region/version is the most complete rom?
If there are non, how can I combine them?
Thanks
Sent from my GT-N7000
letters_to_cleo said:
before anything, just a precaution. Always remember to backup your phone. Now the steps to flash to 4.0.4 thru mobile odin
1. download your stock 4.0.4 ics firmware specific to your region in www.samfirmware.com in your pc or laptop
2. Extract the zip file you've downloaded, it should have the tar.md5 inside. and copy the tar.md5 file to your external sd card.
3. using mobile odin, navigate to OPEN file and go to the destination /folder where you've saved the tar.md5 file (inside your sdcard)
4. In mobile odin, scroll down and tap on Flash fimrware. Hit continue and it will flash your phone after that to the latest stock 4.0.4 ROM.
You don't need to perform a factory reset.
Click to expand...
Click to collapse
romano_ezzat said:
Really thank u man i will do that now
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
U can also hv all stock rom 4m here:
http://forum.xda-developers.com/showthread.php?t=1424997
i Have Brike my Galaxy Note GT7000.
i see only the Boot Logo.
Via ODIN i am able to install the Stock Roms,
But this do not Fix the Boot Loop Problem.
i see in ODIN the Option "Phone Bootloader update"
can somebody send me a Bootloader file for any Stock ROM ICS or GB ?
or have anyone a other idea ? its my first Brike, so please help
After flashing have you wiped cache and data?
Sent from my GT-N7000 using xda app-developers app
Yes, but zu 99% the Wipe process hangs also up to 10 min, than the phone makes a restart.
When you flash a stock ROM via pc odin, does it complete successfully? If you're on stock ics, flash hydracore kernel via pc odin, then try to boot. Sounds like it's a corrupt kernel installation.
Sent from my GT-N7000 using xda app-developers app
SpyderTracks said:
When you flash a stock ROM via pc odin, does it complete successfully? If you're on stock ics, flash hydracore kernel via pc odin, then try to boot. Sounds like it's a corrupt kernel installation.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Its the same,
i have flash the Stock ICS via ODIN, and after this i have Flash the HydraCore v5.1
its the same, (now the Galaxy Note Logo has the Triangle to)
try flashing back to stock GB and see if you can bootup your Note after. Usually corrupted bootloaders are fix when you flash back a stock ROM on it...if stock ICS does not work.. then try flashing your phone back to Stock GB.
After installing hydracore... Try do a wipe cache dalvik and factory reset.
Sent from my GT-N7000 using xda premium
---------- Post added at 04:09 AM ---------- Previous post was at 04:09 AM ----------
Yellow triangle can be removed by triangle away
Sent from my GT-N7000 using xda premium
letters_to_cleo said:
try flashing back to stock GB and see if you can bootup your Note after. Usually corrupted bootloaders are fix when you flash back a stock ROM on it...if stock ICS does not work.. then try flashing your phone back to Stock GB.
Click to expand...
Click to collapse
I have try a Stock GB via ODIN, but its still the same
for what is the PhoneBootloader Update in ODIN, exist any Firmware for this ?
India KL3 having bootloader.(that's why i prefer it all time)
wipe cache and data after flashing said ROM.
Hello guys,
So I just downloaded the leaked official JB ROM for my N7000 and flashed it successfully via Odin (I came from the latest CM10 Nightly build).
After that I wanted to flash the latest Hydracore to have my phone rooted, but apparently it comes in .zip format only.
Since I'm not rooted and I don't have CWM now, how can I get to flash Hydracore via PC Odin?
Hope someone has the answer for this, as the internet is just full of bullocks all websites are describing the same non working procedure....
Thanks all
//M
Sent from my GT-P6800 using xda app-developers app
latest jb leak does not work with hydracore. If you want to root use philz kernel zip file and install using stock recovery.
Sent from my GT-N7000 using xda premium
Thanks much
will do so... I already flashed Hydracore and now I'm stuck @ Samsung's logo
Hopefully I won't face such issues again
Sent from my GT-P6800 using xda app-developers app
Well, I've downloaded both v3.65 .zip files (XXLSA and XXLS7) and tried flashing them through CWM which was already on the device.
After rebooting either, it goes into a black screen after the initial boot screen (Galaxy Note GT-N7000).
Bear in mind I had already flashed Hydracore before that...
Any helpers as to what I'm doing wrong?
Should I reflash the stock ROM via PC Odin then flash Philz kernel via stock recovery?
Thanks in advance
P.S. I know I messed up big time
As what my friend nokia said. Hydracore is not compatible with jb leaks rom.
I m not so sure which kernel u r now, since u stuck at boot logo.
And I don't want to decide too fast that u have bricked ur phone.
Just try to flash the firmware again through odin. If u can, and can boot up, try to flash philz kernel from stock recovery.
Sent from my GT-N7105, at the corner of this rounded earth.
antique_sonic said:
As what my friend nokia said. Hydracore is not compatible with jb leaks rom.
I m not so sure which kernel u r now, since u stuck at boot logo.
And I don't want to decide too fast that u have bricked ur phone.
Just try to flash the firmware again through odin. If u can, and can boot up, try to flash philz kernel from stock recovery.
Sent from my GT-N7105, at the corner of this rounded earth.
Click to expand...
Click to collapse
That's what I'm thinking and doing now, wish me luck
I've also downloaded xxlsa to have 4.1.2 .. according to online tutorials I should flash cf-root via odin, then flash the rom via CWM .. any thoughts?
[Update - 1] phone is ok, re-flashed the stock firmware via PC Odin and it is working now, no problem! tried flashing cf-root, got stuck at the yellow triangle screen and nothing happens ... so I reflashed the stock rom again.
will try now to flash cf-root then boot into recovery, i just might be lucky
[Update - 2] upgraded to JB 4.1.2 successfully and rooted!
So which kernel are you using? and which Jelly bean?
Hello.
I need help.
I am running Cyanogenmod 10, the August 4 build on my GT-P7310. I want to return to the stock 3.2 to get the official 4.0 update from Samsung and to get rid of the bugs that is being caused by the ROM. What should I do?
EDIT:
Please add a download link or any direct download link please.
use odin and download the officcial 4.0.4 file, and flash with odin ( WARNING: will delete EVERYTHING ON THE TABLET!!)
but it'd work...
Or you can down load the stock hc Rom. You can get either at sammobile.com. if you use Odin you'll have to extract the .tar.md5 from the zip file. Use 7-zip to extract it.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
jd1639 said:
Or you can down load the stock hc Rom. You can get either at sammobile.com. if you use Odin you'll have to extract the .tar.md5 from the zip file. Use 7-zip to extract it.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Can I use the recovery instead of ODIN?
I've never done it that way but it should work. Then you can use the zip.
Sent from my SGH-I727 using xda app-developers app
I'm still running on HC3.2. What would be the easiest way to do a backup, that can be flashed with Odin again.
I would like to try ICS.
The easiest is to have a recovery installed, cwm or twrp. Then do the backup with it. Someone else may know how to do a backup you could flash with Odin.
Sent from my SGH-I727 using xda app-developers app
shiko80 said:
I'm still running on HC3.2. What would be the easiest way to do a backup, that can be flashed with Odin again.
I would like to try ICS.
Click to expand...
Click to collapse
Do a backup on a custom recovery (CWM is good). You could flash it through recovery. I'm not sure with ODIN.
Can someone link a 3.2 honeycomb firmware download? Can not find anywhere, need to flash back from ICS to root.
Never mind sammobile.com is awesome. Not sure why that site never came up in any Google searches over the last few days looking for i957 firmware...
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Hello, I'm currently using a G Note on [email protected] ICS, Build Number IMM76D.XXLRK.
I'm thinking about updating to the JB leak for The G Note but im worried about bricking my phone can anyone tell me what the chance of it bricking is? and how id go about changing my firmware from this rom?
Thankyou.
Flash Philz kernel.
Full wipe and flash whichever ROM you want.....
Also, use search as this question has been asked many times in the past
If you have speedmod kernel the chance of bricking its 0... And if you want the ODIN official JB leak just go Odin mode power+home+volume down then flash.. You don't need to wipe going from Ics to JB TW
Tapatalking on my n7000
msedek said:
If you have speedmod kernel the chance of bricking its 0... And if you want the ODIN official JB leak just go Odin mode power+home+volume down then flash.. You don't need to wipe going from Ics to JB TW
Tapatalking on my n7000
Click to expand...
Click to collapse
So its just a case of finding the JB leak i want then, putting it on SD card and flashing using mobile ODIN?
Krypticz123 said:
So its just a case of finding the JB leak i want then, putting it on SD card and flashing using mobile ODIN?
Click to expand...
Click to collapse
No, you should allways follow the installation instructions in the specific thread for the JB Custom Rom you want.
If you choose the XXLSA leak from sammobile.com (that was the base leak for all following XXLSA/C Custom Roms) then you can use Mobile Odin - I did this many times without problems.
OK thankyou
Sent from my GT-N7000 using xda app-developers app
Go here and download the version you want
http://live.samsung-updates.com/index.php?device=GT-N7000
Second download odin from here or you can even use this stock rooted version
http://forum.xda-developers.com/showthread.php?t=2035127
I went for straight stock then rooted after but everyone has thier own ideas!
Ok thankyou I already have ODIN on my phone. Is it safer too use the PC Odin?
Sent from my GT-N7000 using xda app-developers app
Krypticz123 said:
Ok thankyou I already have ODIN on my phone. Is it safer too use the PC Odin?
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Mobile odin and pc odin is similar.
The only different from what I know is.... with mobile odin you can keep ur root, and flash custom kernel.
Whereby with pc odin, all will be brand new. No root, stock kernel.
If ur device is rooted alrd, and u have cwm recovery installed, why don't u choose custom rom, and just flash it from cwm recovery?
Easier, fast, no headache.
Custom rom has some tweaks that might improve performance.
But choice is urs. Good luck mate.
Sent from my GT-N7105 at the corner of this rounded earth
I prefer Mobile odin if already rooted as this way we can change the kernel at the time of flash to be safe