Database Develop

Can't get past LG logo on boot. Will this help?

Ok yesterday I rooted my phone using this method:
http://forum.xda-developers.com/showpost.php?p=23790405&postcount=171
That worked and I had a working phone, but then I installed ROM Manager and then clicked install cwm recovery ( but i think I already had it installed ). Then I went reboot into recovery and now it doesn't get past the LG logo.
So I can't get past the LG logo at all, but I can get into S/W upgrade mode on my computer.
So I have found the smartflash tool on this forum, I want to know if I can use the same fls and bin files I used when rooting my phone (see link above) to unbrick my phone.
Please help I'm freaking out
Thanks you!

Yes, use the same files, your phone will be fine

Ok thanks
I don't know if I should put my "CP bin" file as the .bin or .fls or my "AP bin" as .fls or .bin
http://forum.xda-developers.com/showpost.php?p=23790405&postcount=171
http://forum.xda-developers.com/showthread.php?t=1448803
They give different instructions (1 says CP file = .fls, 1 says CP file = .bin)
Should I just follow the guide for rooting the phone?
Thank you.

You have to use toturial - root , unbrick by smartflash
From the optimus black general
But remember do NOT check cp
I do root my phone by smartflash and all was fine. If you want you can to use stock rom with root or without root from your provider
You have to set smartflash like on the pics - this way is ok
Wysłane z mojego LG Optimus Black za pomocą Tapatalk

Thanks..
If I follow the instructions on this link will it unbrick my bricked phone?
Also I have attached a link to an image of the different methods they are saying which is confusing me. http://imgur.com/GW1Mb
Sorry I am a noob!
Thanks for your help again guys.

If you have turn on s/w upgrade mode you can always unbrick your device .
When I flesh stock rom from my provider I set smartflash like here http://forum.android.com.pl/f359/po...ash-i-kdzu-usuniae-cie-blokady-aparatu-98695/ I use this couple days ago
Maybe you can use both settings smartflash. Each of the guides has been tested with the xda and the second
Wysłane z mojego LG-P970 za pomocą Tapatalk

S6500 Restore stock firmware

Hi people... i need to restore the original firmware for Samsung S6500. I found only the Stock Rom that peter_baz link at the last point of the feature (read XXDL2) but i don't know how to flash it...
Can u help me please?
sorry for my english

Hi.
First i must remember you that this is android development section.
If you would like to flash stock firmware you have to download compatible with your phone Odin and official Samsung's firmware. You can download it from this website www.sammobile.com.
Best greetings
Wysyłane z mojego GT-S6500D za pomocą Tapatalk 2

Thank you, i didn't know SamMobile.com... perfect!
Now i have to start Odin, plug the device in download mode, select the firmware in "PDA", and then Start?

That's right
Wysyłane z mojego GT-S6500D za pomocą Tapatalk 2

dario-mnk said:
Thank you, i didn't know SamMobile.com... perfect!
Now i have to start Odin, plug the device in download mode, select the firmware in "PDA", and then Start?
Click to expand...
Click to collapse
Don't forget to add the PIT file and uncheck "Re-Partition" .

Uizz.UW said:
Don't forget to add the PIT file and uncheck "Re-Partition" .
Click to expand...
Click to collapse
I thought that the PIT file has to be used only if you have a non one package file, right? I haven't used it because I downloaded the latest German ROM and it was one single file that I flashed through odin (PDA). Did I do it wrong?

gbueno6 said:
I thought that the PIT file has to be used only if you have a non one package file, right? I haven't used it because I downloaded the latest German ROM and it was one single file that I flashed through odin (PDA). Did I do it wrong?
Click to expand...
Click to collapse
Some people say that flashing without the .pit file may cause problems . I always do it just in case , but as long as the phone works fine now , you're good to go .

If you select the pit file and uncheck the repartition it's exactly like not selecting the pit file in the first place... The pit file is responsible for the repartition so if you do not perform it... why selecting the file? Anyway, repartition (pit file included..) is NOT needed during normal firmware changing.

I think a cwm flashable zip of stock ROM will be handy. This will not clear the yellow triangle but it may be cwm friendly.
Sent from s6500d with custom ROM and kernel.

Where can I find PIT file? In Odin I can't find the stock rom zip file, what can I do?
I have flash 3 defrend roms sucsesfull but I can not go back to the original rom. (I have downloadit from Sammobile)
If anyone can help me I wood apressieted!
Sory for my English!

larissamafia said:
Where can I find PIT file? In Odin I can't find the stock rom zip file, what can I do?
I have flash 3 defrend roms sucsesfull but I can not go back to the original rom. (I have downloadit from Sammobile)
If anyone can help me I wood apressieted!
Sory for my English!
Click to expand...
Click to collapse
which is your stock rom?

andrea68 said:
which is your stock rom?
Click to expand...
Click to collapse
s6500bulk2_s6500vgrlk2_vgr

Don't know region code
Hi, is there any way of founding out the region code?? The device is bricked so I can't install that handy app, telling you everything about your samsung... Plus if theres any way to get the PDA, CSC and phone codes that SamFirm requires I wouldn't mind knowing it. Thanks

[Q] Please Help :(

Guys i have flashed my sgsa with JB .....
Baseband Ver : XXLQ4
i have root access too.
In order to install a custom rom i wanted to flash the kernel.
So i downloaded universal kernel flasher. the prob is is when i select the kernel.md5 file the application(univ ker fla) returns to the main screen again... i don knw y.. pls help

Some one help me pls...i want to flash CoCore-E-4.4-CWM.zip... Do i need to use universal kernel flasher or i need to go to recovery mode and flash from sd card.... if i goto recovery mode and flash the kernel.md5 file will my phone get bricked????

Flash with Android Terminal Emulator - https://play.google.com/store/apps/...251bGwsMSwxLDEsImphY2twYWwuYW5kcm9pZHRlcm0iXQ..
After download and put the kernel on the root of your internal memory type in the terminal emulator
su
dd if=/sdcard/kernel.bin.md5 of=/dev/block/mmcblk0p15
reboot
Click to expand...
Click to collapse
After each line, press enter from the keyboard

And do it carefully if the input is wrong you can hardbrick your phone
Check it until you feels O.K.
Sent from my GT-I9070 using xda app-developers app

soorya3d said:
Guys i have flashed my sgsa with JB .....
Baseband Ver : XXLQ4
i have root access too.
In order to install a custom rom i wanted to flash the kernel.
So i downloaded universal kernel flasher. the prob is is when i select the kernel.md5 file the application(univ ker fla) returns to the main screen again... i don knw y.. pls help
Click to expand...
Click to collapse
GaYoung28 said:
And do it carefully if the input is wrong you can hardbrick your phone
Check it until you feels O.K.
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
I jus tried flashing the zip file in recovery mode... but the error mess is
E: Signature Verification failed.
wat do i do next...
I am really scared of terminal emulator...

soorya3d said:
I jus tried flashing the zip file in recovery mode... but the error mess is
E: Signature Verification failed.
wat do i do next...
I am really scared of terminal emulator...
Click to expand...
Click to collapse
1. System settings>Developer Options>Turn it on, then check USB debugging.
2. Downlaod kernel, unpack till you get kernel.bin.md5
3. Install this on PC: http://forum.xda-developers.com/showthread.php?t=2119676
4. Use that app to flash kernel, just open it and follow the guide from app.

Don't worry about that. Just follow the steps i tell you and that is.
Sent from my GT-I9070 using xda premium

Try to clear cache and try again..else use d terminal method.
Sent from my GT-I9070 using xda app-developers app

Одг: [Q] Please Help :(
Verification error was because of that you can't install custom signed stuff from stock recovery.
Sent from Galaxy S Advance

Thanks
shut_down said:
1. System settings>Developer Options>Turn it on, then check USB debugging.
2. Downlaod kernel, unpack till you get kernel.bin.md5
3. Install this on PC: http://forum.xda-developers.com/showthread.php?t=2119676
4. Use that app to flash kernel, just open it and follow the guide from app.
Click to expand...
Click to collapse
Thanks a ton bro!!!!
I owe you a beer for this

shut_down is :angel: :angel: :angel:

Odp: [Q] Please Help :(
soorya3d said:
Guys i have flashed my sgsa with JB .....
Baseband Ver : XXLQ4
i have root access too.
In order to install a custom rom i wanted to flash the kernel.
So i downloaded universal kernel flasher. the prob is is when i select the kernel.md5 file the application(univ ker fla) returns to the main screen again... i don knw y.. pls help
Click to expand...
Click to collapse
Cause you have no file explorer like root browser or es file explorer.
tapatalked

shut_down said:
1. System settings>Developer Options>Turn it on, then check USB debugging.
2. Downlaod kernel, unpack till you get kernel.bin.md5
3. Install this on PC: http://forum.xda-developers.com/showthread.php?t=2119676
4. Use that app to flash kernel, just open it and follow the guide from app.
Click to expand...
Click to collapse
I tried this method but it didn't installed the kernal. Although it successfully pushed the kernel.bin.md5 file into my device.

sam_code4u said:
I tried this method but it didn't installed the kernal. Although it successfully pushed the kernel.bin.md5 file into my device.
Click to expand...
Click to collapse
I think you have instaled kernel. Pushed kernel succesfuly means kernel is instaled. Go to About phone, and see is it CoCore kernel.
Послато са GT-I9070 користећи Тапаток 2

shut_down said:
I think you have instaled kernel. Pushed kernel succesfuly means kernel is instaled. Go to About phone, and see is it CoCore kernel.
Послато са GT-I9070 користећи Тапаток 2
Click to expand...
Click to collapse
I was having trouble rooting the device. I was trying to root it with the old root.zip file, the Shaaan's method http://forum.xda-developers.com/showthread.php?t=2087424
After continuous unsuccessful attempts I thought I should have a look at the forum - noticed the script has been updated. My bad. :/
I was trying to install the kernel without rooting the device. so, that was it.

[Q] GT-N7000 does not boot . It shows only a Battery symbol

My GT-N7000 does not boot . It sows only a Battery symbol after i power it up.
I can go into download mode and my windows PC was ale to detect it using ODIN 1.85.
i flashed a PhilZ-cwm6-DDLSC-ODD-4.93.6.tar.md5 . I got into recovery mode and tried to flash a custom CM ROM
I had cleaned up to defaults before this.
But alas that did not work either and after booting it got stuck on the Samsung Logo with a Yellow Triangle.
I tried the Odin download again for PhilZ-cwm6-XXLSZ-OXA-4.93.6.tar.md5 this time and again got into recover and the same story again.
After trying to reboot again and again , now the device shows a Battery symbol on power-up and although i can still get into ODIN download
mode (luckily , so all's not lost i hope ) , I cannot get ODIN nor Kies to communicate with phone ...
My laptop refused to install some additional drivers...
What do i do now ? Try a new PC or chord ?
Also can we move this thread to any other topic . I couldn't find a similar one.

Try this:
1. Three files stock 2.3 Android with Re-Partition by Odin
2. One file stock 4.1 Android by Odin without Re-Partition
3. PhilZ save kernel by recovery
4. PhilZ CWM by recovery
5. Whatever you want
Wysłane z mojego GT-N7000 przy użyciu Tapatalka

winserrao said:
My GT-N7000 does not boot . It sows only a Battery symbol after i power it up.
I can go into download mode and my windows PC was ale to detect it using ODIN 1.85.
i flashed a PhilZ-cwm6-DDLSC-ODD-4.93.6.tar.md5 . I got into recovery mode and tried to flash a custom CM ROM
I had cleaned up to defaults before this.
But alas that did not work either and after booting it got stuck on the Samsung Logo with a Yellow Triangle.
I tried the Odin download again for PhilZ-cwm6-XXLSZ-OXA-4.93.6.tar.md5 this time and again got into recover and the same story again.
After trying to reboot again and again , now the device shows a Battery symbol on power-up and although i can still get into ODIN download
mode (luckily , so all's not lost i hope ) , I cannot get ODIN nor Kies to communicate with phone ...
My laptop refused to install some additional drivers...
What do i do now ? Try a new PC or chord ?
Also can we move this thread to any other topic . I couldn't find a similar one.
Click to expand...
Click to collapse
Odin driver sometime does not work. Should use Heimdall which works much better.
Sent from my GT-N7000 using Tapatalk 2

Its come to samsung logo with yellow triangle now
ravenmag said:
Try this:
1. Three files stock 2.3 Android with Re-Partition by Odin
2. One file stock 4.1 Android by Odin without Re-Partition
3. PhilZ save kernel by recovery
4. PhilZ CWM by recovery
5. Whatever you want
Wysłane z mojego GT-N7000 przy użyciu Tapatalka
Click to expand...
Click to collapse
Ok Cool, I did use the pre rooted Dr. Ketan's pre-rooted GB Rom http : / /d-h.st/HJM
I used it from a different Laptop where the Odin recognized my Brick in download mode
I waited until the Yellow color showed in ID:COM and ticked Reboot + F Reset Time and then Hit Start.
After the NAND write it rebooted but atleast now it goes into the samsung logo with yellow triangle.
Download mode shows me the COUNT as 3 for the custom binary download.
What next ? How do i get past the yellow triangle now ?
Use any PhilZ image ?

forest1971 said:
Odin driver sometime does not work. Should use Heimdall which works much better.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
yep i had to use another friends laptop .
I guess i better check out the drivers in my system and somehow force it to download again...Scary ..::silly:

winserrao said:
yep i had to use another friends laptop .
I guess i better check out the drivers in my system and somehow force it to download again...Scary ..::silly:
Click to expand...
Click to collapse
y r u using odin when there are flashable zips available just place them in ur ext-sd card and flash the rom or recovery u want if u are able to go to ur recovery u dont need to worry at all!!!
---------- Post added at 03:45 PM ---------- Previous post was at 03:03 PM ----------
do this
-if u have a recovery do a factory reset(or wipe clean to install a new rom in philz)
-download a stock 4.1.2 firmware (xxlsz preferably)
-update ur odin to 3.07
-flash the downloaded rom using odin
-now to root ur phone watch some tutorials about how to flash philz recovery using zip file without pc
-if u flash philz recovery properly (proper baseband version) ur problem should probably b solved
BUT U WILL LOOSE UR DATA

Help neede,firmware wont show up in flashtool.

So i downloaded 2 times the tft file from the xda post but it just wont show up in flashtool so i cant flash it.Any suggestion?I really need to downgrade my firmware.
Or how i could root my phone on the latest firmware.the root tools wont work.