Database Develop

Cyanogenmod to Stock

Guys
I installed CM 7 successfully on my SGS using instructions here
http://www.galaxyroot.com/rom-cyanogenmod-7-for-galaxy-s-non-official/
It installed perfectly but i m not having signal. So i flashed back original JPY using ODin but phone is stuck on galaxy logo. Please advice on how to revert to original ROM?
Thanks

did you use PIT and check REPARTITION when you flashed back to JPY ??

azzledazzle said:
did you use PIT and check REPARTITION when you flashed back to JPY ??
Click to expand...
Click to collapse
No as i have one file only JPY_JPY_JPY.tar

azzledazzle said:
did you use PIT and check REPARTITION when you flashed back to JPY ??
Click to expand...
Click to collapse
As per Odin tutorial i select Pit and repartition only when i have 3 files. Can you please advice where can i get 3 files as i have one file only from samfirmware?
My I9000 is international and factory unlocked....

right well were gunna need a 3 file firmware in order to use PIT. bear with me whilst i have a look for one.

probably samfirmare.com ?

yeah just been looking on there they all seem to be 1 file

Yes samfirmware.com has 1 files only.
Are you sure if i flash with 3 files and select repartition then it will solve my problem?

install another firmware like jpjpa with 3 files and then flash xxjpy on it

Will this work?
http://forum.xda-developers.com/showthread.php?t=865701
How to extract this exe file after downloading it?

Will kies be of any help if i put phone in download mode and attach it with kies?

well im looking at a site that says do re partition with 1 file but its not recommended. http://androidadvices.com/update-samsung-galaxy-s-gt-i9000-to-froyo-xxjpy-2-2-1/
re partition should fix the problem,

zeeshee said:
Will this work?
http://forum.xda-developers.com/showthread.php?t=865701
How to extract this exe file after downloading it?
Click to expand...
Click to collapse
WOOHOO !!!! you found it lol been searching for that with no luck. if XDA says it will work.... it will work lol i have faith in XDA

How to get three files as it is only 1 exe file?

exe ?? thats weird. what happens when u run it.
it will probably just be 1 file like most firmwares. but if its on there saying its good to flash with pit then do it. have you read thru the comments ??

azzledazzle said:
exe ?? thats weird. what happens when u run it.
it will probably just be 1 file like most firmwares. but if its on there saying its good to flash with pit then do it. have you read thru the comments ??
Click to expand...
Click to collapse
Check the link in my last post. If you click on download it is downloading an exe file....
GT-I9000_I9000XXJPU_I9000XXJPU_CODE-MODEM_OSP-MID.exe
I need i need to extract it or rename it to zip to get 3 files????

zeeshee said:
Check the link in my last post. If you click on download it is downloading an exe file....
GT-I9000_I9000XXJPU_I9000XXJPU_CODE-MODEM_OSP-MID.exe
I need i need to extract it or rename it to zip to get 3 files????
Click to expand...
Click to collapse
i dont know try renaming it. im downloading it myself now so i can see whats going on

ok its self ecxtrating file..
it gave me following 2 files only
CODE_I9000XXJPU.tar.md5
MODEM_I9000XXJPU.tar.md5
Are these phone and CSC for oDin? What about PDA?

http://www.multiupload.com/PUSOOBQ8K5 download that I9000XXJPU with all 3 files flash thru odin with 512 pit

azzledazzle said:
http://www.multiupload.com/PUSOOBQ8K5 download that I9000XXJPU with all 3 files flash thru odin with 512 pit
Click to expand...
Click to collapse
Thanks. Odin is updating now.. Hope it works once done.

[Q] How to flash a firmware downloaded from Samfirmware?

Hi,
I'm looking to update my Samsung Galaxy S GT-I9000 to the latest official Gingerbread released here in Australia. I have gone here to find and download the firmware. In all the videos I've watched, you're required to use multiple files in Odin to flash a firmware(pda, phone, csc, pit). My problem is though when I opened the downloaded firmware there was only one file, a .tar file. How would I go about flashing this?
Thanks.

smithchipz said:
Hi,
I'm looking to update my Samsung Galaxy S GT-I9000 to the latest official Gingerbread released here in Australia. I have gone here to find and download the firmware. In all the videos I've watched, you're required to use multiple files in Odin to flash a firmware(pda, phone, csc, pit). My problem is though when I opened the downloaded firmware there was only one file, a .tar file. How would I go about flashing this?
Thanks.
Click to expand...
Click to collapse
Don't flash that. You may run into a problem. I recommend you use GB flashing kit from here: http://d-h.st/4np and flash it. Its for galaxy s. Its got everything you need. If you want a step by step instruction go here: http://forum.xda-developers.com/showthread.php?t=1637966. That is how to use it. I hope I helped! It worked for me!

smithchipz said:
Hi,
I'm looking to update my Samsung Galaxy S GT-I9000 to the latest official Gingerbread released here in Australia. I have gone here to find and download the firmware. In all the videos I've watched, you're required to use multiple files in Odin to flash a firmware(pda, phone, csc, pit). My problem is though when I opened the downloaded firmware there was only one file, a .tar file. How would I go about flashing this?
Thanks.
Click to expand...
Click to collapse
Just use Odin.. it's quick and easy...
Just put .tar file in PDA and flash.. don't tick repartition..
If my post helped, don't mind hitting THANKS

drakester20 said:
Just use Odin.. it's quick and easy...
Just put .tar file in PDA and flash.. don't tick repartition..
If my post helped, don't mind hitting THANKS
Click to expand...
Click to collapse
It contains a pit file so it should auto tick repartition

slaphead20 said:
It contains a pit file so it should auto tick repartition
Click to expand...
Click to collapse
When I add the tar file in the PDA section it doesn't auto tick repartition though?
Sent from my Transformer TF101 using xda app-developers app

smithchipz said:
When I add the tar file in the PDA section it doesn't auto tick repartition though?
Sent from my Transformer TF101 using xda app-developers app
Click to expand...
Click to collapse
I would just flash in pda , should be ok

[Q] How to downgrade from CM10 to stock GB?

Long story but I need to downgrade my i9000 from CM10 (currently on c-rom bean v2.3) back to stock 2.3.6 and couldnt find anything specific to the i9000 on to how to do it. Can I just get the stock firmware (ie PDA, CSC, Phone) and then flash through Odin? But I read on XDA (http://forum.xda-developers.com/showthread.php?t=1729458) that I may also need PIT and Bootloader? If so, where can I download these files??? Any help greatly appreciated!!!!

blion said:
Long story but I need to downgrade my i9000 from CM10 (currently on c-rom bean v2.3) back to stock 2.3.6 and couldnt find anything specific to the i9000 on to how to do it. Can I just get the stock firmware (ie PDA, CSC, Phone) and then flash through Odin? But I read on XDA (http://forum.xda-developers.com/showthread.php?t=1729458) that I may also need PIT and Bootloader? If so, where can I download these files??? Any help greatly appreciated!!!!
Click to expand...
Click to collapse
You have to download any 3 files stock ROM (I suggest you JVS, as JW versions can damage your IMEI), then select PDA, CSC and Phone
in ODIN. You don't have to have bootloader, as it is already in PDA, and yes, you have to have PIT file, it is usually within archive with ROM.
Just flash it and you're done. For download go to this thread: http://forum.xda-developers.com/showthread.php?t=1837223 and you'll find
there any ROM you want. Hope it will help you.
--
Leszek

twinsen.net said:
You have to download any 3 files stock ROM (I suggest you JVS, as JW versions can damage your IMEI), then select PDA, CSC and Phone
in ODIN. You don't have to have bootloader, as it is already in PDA, and yes, you have to have PIT file, it is usually within archive with ROM.
Just flash it and you're done. For download go to this thread: http://forum.xda-developers.com/showthread.php?t=1837223 and you'll find
there any ROM you want. Hope it will help you.
--
Leszek
Click to expand...
Click to collapse
Thanks for your prompt response. I am looking to go back to stock GB and last time I downloaded them from here (http://forum.xda-developers.com/showthread.php?t=1102881&page=1). I chose XWJW8/XWJW1/VAUJV9/Sbl (CSC: VAU (Vodafone)) as I live in Australia and my provider is Vodafone. But how do I extract the PIT file??
Also out of curiosity, what if I chose the stock rom of another network provider? Does it make a difference??

blion said:
But how do I extract the PIT file??
Also out of curiosity, what if I chose the stock rom of another network provider? Does it make a difference??
Click to expand...
Click to collapse
you cannot extract a PIT File, you can download a 512 PIT file from My Android Collections
If you use telstra , it will not work for vodafone and vice versa as they are branded
(Do remember to backup your contacts, data, images etc and also your EFS folder before flashing a ROM and make sure you have more than 50% battery charge before you attempt any sort of flashing.)

xsenman said:
you cannot extract a PIT File, you can download a 512 PIT file from My Android Collections
If you use telstra , it will not work for vodafone and vice versa as they are branded
(Do remember to backup your contacts, data, images etc and also your EFS folder before flashing a ROM and make sure you have more than 50% battery charge before you attempt any sort of flashing.)
Click to expand...
Click to collapse
Ok. So I take the 512 pit file from your link and also the official GB firmware from Ramad's thread. Then flash using Odin with only PIT, PDA, Phone and CSC. Also "re-partition", "Auto reboot" and "F Reset Time" needs to be ticked. Sorry about being so padantic but just wanted to make sure I get the steps right the first time. Thanks!!!

blion said:
Ok. So I take the 512 pit file from your link and also the official GB firmware from Ramad's thread. Then flash using Odin with only PIT, PDA, Phone and CSC. Also "re-partition", "Auto reboot" and "F Reset Time" needs to be ticked. Sorry about being so padantic but just wanted to make sure I get the steps right the first time. Thanks!!!
Click to expand...
Click to collapse
yup, that should do it mate.

[Q] Re-Partition operation failed!!

I am trying to downgrade my sgsa from jb to gb and my mobile is from hongkong
i use the three combo files phone csc and pit files
but whenever i start to flash odin gives me error re-partition operaion failed
and in download mode i see "Custom pit binary!!" in red lines
I have searched a lot but no solution
i have tried many odin versions as well but all were same
i even used heimdall but it didnt flashed too
right now i can just use jellybean i can flash any jb roms stock or custom but cannot downgrade to gb
anyone has the solution for this

ManzzaShahi said:
I am trying to downgrade my sgsa from jb to gb and my mobile is from hongkong
i use the three combo files phone csc and pit files
but whenever i start to flash odin gives me error re-partition operaion failed
and in download mode i see "Custom pit binary!!" in red lines
I have searched a lot but no solution
i have tried many odin versions as well but all were same
i even used heimdall but it didnt flashed too
right now i can just use jellybean i can flash any jb roms stock or custom but cannot downgrade to gb
anyone has the solution for this
Click to expand...
Click to collapse
maybe u chose the wrong pit file... i would advise you to use 1 single md5 file instead of using parts file.

Patlcs said:
maybe u chose the wrong pit file... i would advise you to use 1 single md5 file instead of using parts file.
Click to expand...
Click to collapse
i have tested and downloaded 2 times and same problem
and i am not the only 1 there are other ppl also who are facing this issue
there is no any solution i find until now

Hi dowload this
http:/ /d-h. st/sA3 (delete spaces)
And then flash in odin v3 1.85 only
PIT*: GT-I9070_EUR_XX_8G.pitPDA*: CODE_GT-I9070_I9070DXLD1_CL1068093_REV00_user_SEC_KEY_LD1_ 8G.tar.md5CSC*: CSC_GT-I9070-MULTI-CSC-OLBLD1_SEC_KEY_8G.tar.md5
Congratulations
I recomend that whipe all
Sent from my GT-I9070 using xda premium

Gabboxxx said:
Hi dowload this
http:/ /d-h. st/sA3 (delete spaces)
And then flash in odin v3 1.85 only
PIT*: GT-I9070_EUR_XX_8G.pitPDA*: CODE_GT-I9070_I9070DXLD1_CL1068093_REV00_user_SEC_KEY_LD1_ 8G.tar.md5CSC*: CSC_GT-I9070-MULTI-CSC-OLBLD1_SEC_KEY_8G.tar.md5
Congratulations
I recomend that whipe all
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
i am using those files bro but not working
maybe problem because of a hongkong variant

Broswe in samfirmaware a ROM of honkong
Sent from my GT-I9070 using xda premium

me too only can hongkong rom flash but i want persian language
cannot flash any rom
pit repartition error
jvbmd1 have mor file as other stock md5 file
---------- Post added at 08:55 PM ---------- Previous post was at 08:54 PM ----------
me too only can hongkong rom flash but i want persian language
cannot flash any rom
pit repartition error
hongkong have mor file as other stock md5 file

can you fix re partition error when flash ?
ManzzaShahi said:
i am using those files bro but not working
maybe problem because of a hongkong variant
Click to expand...
Click to collapse
hello
can you fix your phone ?
re partition error when flash ?
only hon Kong ROM worked and flashed for me

zakaria9 said:
hello
can you fix your phone ?
re partition error when flash ?
only hon Kong ROM worked and flashed for me
Click to expand...
Click to collapse
ya can be fixed bro :laugh::laugh::laugh:
you first root and install root explorer then copy "tee" folder to your sdcard
now download firmware of other region and flash it any jellybean
then root again and replace the "tee" folder with the one you saved before
if you want to downgrade to gb download files and just flash pda file and after success boot and then flash hongkong region firmware

[Q] Galaxy S Plus Bootloop problem

So my phone is constantly bootloping and it seems I cant find any solution for this. I have tried to flash with stock firmaware, flash with Bootloop fixes found on this forum, with some other ROMs. But not any of these helped. And the worst part is, that when I go to Recovery I cant do anything because it proccess some code and after few seconds it reboots. Thats a big minus because I cant install any Kernel. Its just f. up. I also managed to do a hard reset with phone dial code, it didnt fix anything. Ive also tried to flash broodROM but when I load ROM inside Odin, Odin just crashes immediately.
1. How to fix Odin so it doesnt crash when I load broodROM?
2. Is it possible to flash a kernel with Odin for Gingerbread 2.3.5?
3. Any other solution?

hi
first make sûre that joue have Samsung USB driver installed and kies was unist.. then run windows un safe mode
OK to fix Odin problème using old version is better i suggest 1.85 then right click run as admin
code pda ans pit file
start

MarXhack-TN said:
code pda ans pit file
Click to expand...
Click to collapse
Hi,
what do you mean by that? Usually I would select "One Package" with newer version of Odin, but with 1.85 there is no such an option and I only have one file, which is tar.md5... Are u trying to say that I should load that file under every section or what? Because I dont have PIT file.
Thanks

Dr.Weed1 said:
Hi,
what do you mean by that? Usually I would select "One Package" with newer version of Odin, but with 1.85 there is no such an option and I only have one file, which is tar.md5... Are u trying to say that I should load that file under every section or what? Because I dont have PIT file.
Thanks
Click to expand...
Click to collapse
you should have the pit file
i think that you need a new stockrom or try searching thé pit file
sorry for my english bro
here is Odin + pit forum.xda-developers.com/attachment.php?attachmentid=436587&d=1289226608

MarXhack-TN said:
you should have the pit file
i think that you need a new stockrom or try searching thé pit file
sorry for my english bro
here is Odin + pit forum.xda-developers.com/attachment.php?attachmentid=436587&d=1289226608
Click to expand...
Click to collapse
I have downloaded the first link from post #2
http://forum.xda-developers.com/showthread.php?t=1396837

Dr.Weed1 said:
Hi,
what do you mean by that? Usually I would select "One Package" with newer version of Odin, but with 1.85 there is no such an option and I only have one file, which is tar.md5... Are u trying to say that I should load that file under every section or what? Because I dont have PIT file.
Thanks
Click to expand...
Click to collapse
MarXhack-TN said:
you should have the pit file
i think that you need a new stockrom or try searching thé pit file
sorry for my english bro
here is Odin + pit forum.xda-developers.com/attachment.php?attachmentid=436587&d=1289226608
Click to expand...
Click to collapse
try this one
it will work samsung-updates.com/details/19969/Galaxy_S_Plus/GT-I9001/KPN/I9001XXKQE.html