So my phone is constantly bootloping and it seems I cant find any solution for this. I have tried to flash with stock firmaware, flash with Bootloop fixes found on this forum, with some other ROMs. But not any of these helped. And the worst part is, that when I go to Recovery I cant do anything because it proccess some code and after few seconds it reboots. Thats a big minus because I cant install any Kernel. Its just f. up. I also managed to do a hard reset with phone dial code, it didnt fix anything. Ive also tried to flash broodROM but when I load ROM inside Odin, Odin just crashes immediately.
1. How to fix Odin so it doesnt crash when I load broodROM?
2. Is it possible to flash a kernel with Odin for Gingerbread 2.3.5?
3. Any other solution?
hi
first make sûre that joue have Samsung USB driver installed and kies was unist.. then run windows un safe mode
OK to fix Odin problème using old version is better i suggest 1.85 then right click run as admin
code pda ans pit file
start
MarXhack-TN said:
code pda ans pit file
Click to expand...
Click to collapse
Hi,
what do you mean by that? Usually I would select "One Package" with newer version of Odin, but with 1.85 there is no such an option and I only have one file, which is tar.md5... Are u trying to say that I should load that file under every section or what? Because I dont have PIT file.
Thanks
Dr.Weed1 said:
Hi,
what do you mean by that? Usually I would select "One Package" with newer version of Odin, but with 1.85 there is no such an option and I only have one file, which is tar.md5... Are u trying to say that I should load that file under every section or what? Because I dont have PIT file.
Thanks
Click to expand...
Click to collapse
you should have the pit file
i think that you need a new stockrom or try searching thé pit file
sorry for my english bro
here is Odin + pit forum.xda-developers.com/attachment.php?attachmentid=436587&d=1289226608
MarXhack-TN said:
you should have the pit file
i think that you need a new stockrom or try searching thé pit file
sorry for my english bro
here is Odin + pit forum.xda-developers.com/attachment.php?attachmentid=436587&d=1289226608
Click to expand...
Click to collapse
I have downloaded the first link from post #2
http://forum.xda-developers.com/showthread.php?t=1396837
Dr.Weed1 said:
Hi,
what do you mean by that? Usually I would select "One Package" with newer version of Odin, but with 1.85 there is no such an option and I only have one file, which is tar.md5... Are u trying to say that I should load that file under every section or what? Because I dont have PIT file.
Thanks
Click to expand...
Click to collapse
MarXhack-TN said:
you should have the pit file
i think that you need a new stockrom or try searching thé pit file
sorry for my english bro
here is Odin + pit forum.xda-developers.com/attachment.php?attachmentid=436587&d=1289226608
Click to expand...
Click to collapse
try this one
it will work samsung-updates.com/details/19969/Galaxy_S_Plus/GT-I9001/KPN/I9001XXKQE.html
Related
Hi, I got the JPY ROM from the thread in the general discussion, and any time i have tried to flash it onto my phone, the phone refuses to start properly. It just vibrates a couple of times and black screens.
I am using Odin 1.3 and PIT 512 for this as it says on SamFirmware.com.
Is this the ROM not working properly, or me doing something wrong?
Mate did you click repartition in odin?If you did then you SHOULDNT!!!!
Try to get in to recovery mod with the 3 button combo and make a factory reset if yo had NOT clicked repartition.
In case had HAD clicked repartition in Odin then i guess you ll have to download a foul stock firmware and flash it.Meaning a firmeare that has Modem and CSC files aswell and not only PDA file...
I'm just about to flash XXJPY and I was just wondering, do I have to unroot 'before' flashing the single file (pda) XXJPY or can I leave it as is..?? Does it make any difference..??
Thanks
tackygr said:
Mate did you click repartition in odin?If you did then you SHOULDNT!!!!
Try to get in to recovery mod with the 3 button combo and make a factory reset if yo had NOT clicked repartition.
In case had HAD clicked repartition in Odin then i guess you ll have to download a foul stock firmware and flash it.Meaning a firmeare that has Modem and CSC files aswell and not only PDA file...
Click to expand...
Click to collapse
haha, thanks mate, i forgot to try that, i'll give it a go later.
topcat888 said:
I'm just about to flash XXJPY and I was just wondering, do I have to unroot 'before' flashing the single file (pda) XXJPY or can I leave it as is..?? Does it make any difference..??
Thanks
Click to expand...
Click to collapse
nah you dont need to have it rooted to flash JPY.
I believe the JPY file in the general forum is just an upgrade / high level package which is why you dont tick repartition. Usually look for posts by Richthofen- hes the dude who converts it to mid level packages so you can couple it with a CSC and modem.
hi there same thing happened to me i updated this thru samsung kies im stock at black screen would factory reset make my phone work again? i need help please please please
dopeee said:
nah you dont need to have it rooted to flash JPY.
I believe the JPY file in the general forum is just an upgrade / high level package which is why you dont tick repartition. Usually look for posts by Richthofen- hes the dude who converts it to mid level packages so you can couple it with a CSC and modem.
Click to expand...
Click to collapse
I am already rooted so should I un-root before flashing or just leave it rooted..???
And also have SGS Battery Icon Mod installed, again does this have to be un-installed before flash or not..??
Can someone post a link to the right ROM that I can use to update using ODIN that will not result in existing data lost ? The one that I downloaded is a single tar file (Size - 298,890KB) that contains these files. If this is the right file, do i just specify the tar file in the PDA and uncheck repartition ?
modem.bin
param.lfs
zimage
cache.rfs
factoryfs.rfs
Guys
I installed CM 7 successfully on my SGS using instructions here
http://www.galaxyroot.com/rom-cyanogenmod-7-for-galaxy-s-non-official/
It installed perfectly but i m not having signal. So i flashed back original JPY using ODin but phone is stuck on galaxy logo. Please advice on how to revert to original ROM?
Thanks
did you use PIT and check REPARTITION when you flashed back to JPY ??
azzledazzle said:
did you use PIT and check REPARTITION when you flashed back to JPY ??
Click to expand...
Click to collapse
No as i have one file only JPY_JPY_JPY.tar
azzledazzle said:
did you use PIT and check REPARTITION when you flashed back to JPY ??
Click to expand...
Click to collapse
As per Odin tutorial i select Pit and repartition only when i have 3 files. Can you please advice where can i get 3 files as i have one file only from samfirmware?
My I9000 is international and factory unlocked....
right well were gunna need a 3 file firmware in order to use PIT. bear with me whilst i have a look for one.
probably samfirmare.com ?
yeah just been looking on there they all seem to be 1 file
Yes samfirmware.com has 1 files only.
Are you sure if i flash with 3 files and select repartition then it will solve my problem?
install another firmware like jpjpa with 3 files and then flash xxjpy on it
Will this work?
http://forum.xda-developers.com/showthread.php?t=865701
How to extract this exe file after downloading it?
Will kies be of any help if i put phone in download mode and attach it with kies?
well im looking at a site that says do re partition with 1 file but its not recommended. http://androidadvices.com/update-samsung-galaxy-s-gt-i9000-to-froyo-xxjpy-2-2-1/
re partition should fix the problem,
zeeshee said:
Will this work?
http://forum.xda-developers.com/showthread.php?t=865701
How to extract this exe file after downloading it?
Click to expand...
Click to collapse
WOOHOO !!!! you found it lol been searching for that with no luck. if XDA says it will work.... it will work lol i have faith in XDA
How to get three files as it is only 1 exe file?
exe ?? thats weird. what happens when u run it.
it will probably just be 1 file like most firmwares. but if its on there saying its good to flash with pit then do it. have you read thru the comments ??
azzledazzle said:
exe ?? thats weird. what happens when u run it.
it will probably just be 1 file like most firmwares. but if its on there saying its good to flash with pit then do it. have you read thru the comments ??
Click to expand...
Click to collapse
Check the link in my last post. If you click on download it is downloading an exe file....
GT-I9000_I9000XXJPU_I9000XXJPU_CODE-MODEM_OSP-MID.exe
I need i need to extract it or rename it to zip to get 3 files????
zeeshee said:
Check the link in my last post. If you click on download it is downloading an exe file....
GT-I9000_I9000XXJPU_I9000XXJPU_CODE-MODEM_OSP-MID.exe
I need i need to extract it or rename it to zip to get 3 files????
Click to expand...
Click to collapse
i dont know try renaming it. im downloading it myself now so i can see whats going on
ok its self ecxtrating file..
it gave me following 2 files only
CODE_I9000XXJPU.tar.md5
MODEM_I9000XXJPU.tar.md5
Are these phone and CSC for oDin? What about PDA?
http://www.multiupload.com/PUSOOBQ8K5 download that I9000XXJPU with all 3 files flash thru odin with 512 pit
azzledazzle said:
http://www.multiupload.com/PUSOOBQ8K5 download that I9000XXJPU with all 3 files flash thru odin with 512 pit
Click to expand...
Click to collapse
Thanks. Odin is updating now.. Hope it works once done.
hi, i have i9001 s+ and i cant flash stock rom I9001JPKG1 PDA&CSC with odin 4.43, it gets stuck on ext4.img. but when i flash with pda only it accepts and boots ok. but problem when i check *#1234# it says CSC -unknown. pls help i googled and found no answer.....thanks to all.. files are from samfirmware.com
mbba67 said:
hi, i have i9001 s+ and i cant flash stock rom I9001JPKG1 PDA&CSC with odin 4.43, it gets stuck on ext4.img. but when i flash with pda only it accepts and boots ok. but problem when i check *#1234# it says CSC -unknown. pls help i googled and found no answer.....thanks to all.. files are from samfirmware.com
Click to expand...
Click to collapse
ANYONE HAS ANSWERS? Where are the experts and dev?
Anyone know how to download the ODIN Multi_Downloader 4.33 and ops file.
Cannot access to samfirmware.com now
mynewuser said:
Anyone know how to download the ODIN Multi_Downloader 4.33 and ops file.
Cannot access to samfirmware.com now
Click to expand...
Click to collapse
you have to register then only you can download
odin 4.43
http://www.megaupload.com/?d=UQUMXYDG
OPS I9001
http://www.megaupload.com/?d=0V7D2HQG .ops ---> OPS
I9001XXKPG pw sampro.pl
http://hotfile.com/dl/132873531/40c9f94/GT-I9001_XEN_I9001XXKPG_I9001XENKP1_I9001XXKPF.rar.html .md5 ---> One Package
Start!
does this work on my dutch samsung gs plus?????????????
what is the password of this rom??
can't unrar it without a password...
Sh0rty007 said:
what is the password of this rom??
can't unrar it without a password...
Click to expand...
Click to collapse
SamFirmware.com
@mbba67
Try using another USB port. Make sure the Odin drivers are installed properly. Also make sure your internet connection is stable.
mikeeo019 said:
@mbba67
Try using another USB port. Make sure the Odin drivers are installed properly. Also make sure your internet connection is stable.
Click to expand...
Click to collapse
Nop, the CSC file has problems cant flash it.. try and see if u can
hi,Me too facing the same problem can't flash with csc file.tried to flash only csc but same result stuck on ext4 image.tried JPKG1,JPKF7.does any anyone have the one packeg file for arabic I9001.
majeed said:
hi,Me too facing the same problem can't flash with csc file.tried to flash only csc but same result stuck on ext4 image.tried JPKG1,JPKF7.does any anyone have the one packeg file for arabic I9001.
Click to expand...
Click to collapse
It seems that the CSC file is not valid and it's an error from "samfirmware" and you should not flash the CSC file. you can only flash the PDA file. and unfortunately there is no "one package arabic rom" available yet.
the best choice for Iranians is to update to "I9001XXKPS 2.3.6" ROM and modify it to have Farsi language and keyboard... Here you can find the guide in your own language.
use google for i9001 multi csc i9001 jpkf3 .and flashed only csc
Hi please help me to flash S5830i with Odin 1.85.
I get error on the start,i try to flash this firmware:
S5830iZCLA4_S5830iCHNLA4_S5830iZCLA4_HOME.tar.md5
tnx br Roni
It's a one package file
Please use the normal ODIN to flash that
Herpderp Defy.
EmoBoiix3 said:
Please use the normal ODIN to flash that
.
Click to expand...
Click to collapse
What version you mean normal Odin
Odin
This Version (It´s Atached)
SnowPluralism said:
This Version (It´s Atached)
Click to expand...
Click to collapse
Tnx but this odin not working on S5830i
Roni1976 said:
Tnx but this odin not working on S5830i
Click to expand...
Click to collapse
Have you tried ?
Herpderp Defy.
EmoBoiix3 said:
Have you tried ?
Herpderp Defy.
Click to expand...
Click to collapse
Of course I tried to flash,I'm not a baby, seriously I can flash them.
I found four files firmware:
1.BOOT_S5830iXXKK5_REV00.tar.md5
2.GT-S5830i-MULTI-CSC-OXEKK4_RST.tar.md5
3.MODEM_S5830iXXKK5_REV00.tar.md5
4.PDA_S5830iXXKL1_REV00.tar.md5
And it`s working perfect with odin 1.85,but one image of md5 file not flashing.
who have Chinese with four files or backup
Roni1976 said:
Of course I tried to flash,I'm not a baby, seriously I can flash them.
I found four files firmware:
1.BOOT_S5830iXXKK5_REV00.tar.md5
2.GT-S5830i-MULTI-CSC-OXEKK4_RST.tar.md5
3.MODEM_S5830iXXKK5_REV00.tar.md5
4.PDA_S5830iXXKL1_REV00.tar.md5
And it`s working perfect with odin 1.85,but one image of md5 file not flashing.
who have Chinese with four files or backup
Click to expand...
Click to collapse
Boot to bootloader
Csc to csc
Modem to phone
Pda to pda
Herpderp Defy.
EmoBoiix3 said:
Boot to bootloader
Csc to csc
Modem to phone
Pda to pda
Herpderp Defy.
Click to expand...
Click to collapse
You are funny
Read my post carefully
One of those file might be corrupted. Try other firmware first, if it succeed then it might be corrupted
Sent from my GT-S5830 using Tapatalk
Even i m getting the same problem.. I used Odin 1.7 It Loaded up to System.img..50%... and then suddenly failed.. I dont know what happend...
Samsung guys slowly screwing the box.. :-(
Odin for GT-S5830 no need a *.pit but an *.ops file. Not sure about GT-S5830i.
So another thread about s5830i...You need Odin 1.85 and a version of Firmware for YOUR country...or just find PDA.tar in google and flash it
Roni1976 said:
Of course I tried to flash,I'm not a baby, seriously I can flash them.
I found four files firmware:
1.BOOT_S5830iXXKK5_REV00.tar.md5
2.GT-S5830i-MULTI-CSC-OXEKK4_RST.tar.md5
3.MODEM_S5830iXXKK5_REV00.tar.md5
4.PDA_S5830iXXKL1_REV00.tar.md5
And it`s working perfect with odin 1.85,but one image of md5 file not flashing.
who have Chinese with four files or backup
Click to expand...
Click to collapse
i got a rom in chinese and can work with odin 1.85
i cant post link here, It's stock rom for HongKong S5830iZSLA3
kindly reach me via email [email protected]
Use odin 1.85. the official s5830i odin may not even detect the phone in download mode. open odin 1.85
select pda
modem and csc and ignore boot
phone will flash ok. use jig to enter download mode if combination not work.
gsmxpert said:
Use odin 1.85. the official s5830i odin may not even detect the phone in download mode. open odin 1.85
select pda
modem and csc and ignore boot
phone will flash ok. use jig to enter download mode if combination not work.
Click to expand...
Click to collapse
wonder if this works on non original firmware of that particular phone?
have you solve your problem sir im still facing this problem can you share the link that you use and the chinese file ineed to sir.. tia
I think u should try Odin 1.84 with pit file
yes sir i have try with pit file but same.. i need to change it to chines language sir... hope can anyone help me...
the problem with this phone is that odin can't flash it with onepackage file
you have to split the rom to 3 files flashabl with odin
follow this for the procedure
i use it with many roms with succeed
http://forum.xda-developers.com/showthread.php?t=1611225&page=19
(TUT) FLASHING ODIN VIA ONE PACKAGE
who have problem on flashing firmware one package that get stuck on 'setup connection' or get 'failed' ..
there have a solution for who didn't know..
download firmware from www.sammobile.com
need samsung usb driver to detect phone and odin.
or install samsung kies.
then need odin3 .. i have it..
from '[email protected] thanks to him..
and here is the new odin3 v 3.07 http://www.4shared.com/zip/_OYyK4Sq/Odin3_v307.html ..
and put the file on PDA without .pit file and no need to tick or click anything..
just let it like that..
sorry mirror it [email protected]
PLEASE HIT THANKS BUTTON if helped..
SemBoyHehe said:
who have problem on flashing firmware one package that get stuck on 'setup connection' and get 'failed' .. there have a solution for who didn't know.. download firmware from www.sammobile.com then need odin3 .. i have it.. from '[email protected] thanks to him.. and here is the new odin3 v 3.07 http://www.4shared.com/zip/C7LtcIw3/Odin3_V307.html .. and put the file on PDA without .pit file and no need to tick or click anything.. just let it like that.. sorry mirror it [email protected]
PLEASE HIT THANKS BUTTON if helped..
Click to expand...
Click to collapse
I was tested it a few moment ago and i must say . . . IT WORKS !! For newbies and noobs, you must put the *.tar.md5 (the rom file) only in PDA section and select START only if you plugged in your phone is in Download Mode and of course +1 for you
Alucard1989pl said:
I was tested it a few moment ago and i must say . . . IT WORKS !! For newbies and noobs, you must put the *.tar.md5 (the rom file) only in PDA section and select START only if you plugged in your phone is in Download Mode and of course +1 for you
Click to expand...
Click to collapse
don't forget tell all n click the thanks button if i helped..
SemBoyHehe said:
who have problem on flashing firmware one package that get stuck on 'setup connection' and get 'failed' .. there have a solution for who didn't know.. download firmware from www.sammobile.com then need odin3 .. i have it.. from '[email protected] thanks to him.. and here is the new odin3 v 3.07 http://www.4shared.com/zip/C7LtcIw3/Odin3_V307.html .. and put the file on PDA without .pit file and no need to tick or click anything.. just let it like that.. sorry mirror it [email protected]
PLEASE HIT THANKS BUTTON if helped..
Click to expand...
Click to collapse
Thanks alot for this tutorial
easy and quite helpful.
you and rafael just saved my aceI :good:
Thanks
soumik shah said:
Thanks alot for this tutorial
easy and quite helpful.
you and rafael just saved my aceI :good:
Thanks
Click to expand...
Click to collapse
small problem man.
Bro just wnted to ask that i am on Jelly blast rom now and want to move on stock rom so i have the firmware and odin v3.0.7 so just i hav to
1.go to download mode
2.just choose the pda file
3.connect cell to pc
4.click start??
m i right?
aniket123 said:
Bro just wnted to ask that i am on Jelly blast rom now and want to move on stock rom so i have the firmware and odin v3.0.7 so just i hav to
1.go to download mode
2.just choose the pda file
3.connect cell to pc
4.click start??
m i right?
Click to expand...
Click to collapse
Yes
yes. if can. flash multi package.
Sad
SemBoyHehe said:
yes. if can. flash multi package.
Click to expand...
Click to collapse
It showed failed check the process
1.downloaded firmware
2.opened odin and put in the PDA file
3.went in download mode and connected to pc
4.started the process
5.it failed
if i was wrong please correct me!
aniket123 said:
It showed failed check the process
1.downloaded firmware
2.opened odin and put in the PDA file
3.went in download mode and connected to pc
4.started the process
5.it failed
if i was wrong please correct me!
Click to expand...
Click to collapse
which country are you from? better u flash multi package that have pda, modem and csc file. search on development section. are u already install kies/samsung usb driver? odin detect? have comort??
SemBoyHehe said:
which country are you from? better u flash multi package that have pda, modem and csc file. search on development section. are u already install kies/samsung usb driver? odin detect? have comort??
Click to expand...
Click to collapse
Country-India-INS
Multi Pakage goes tough for me or if you are free can u give me the steps????
aniket123 said:
Country-India-INS
Multi Pakage goes tough for me or if you are free can u give me the steps????
Click to expand...
Click to collapse
Download the firmware of your choice from here:
http://forum.xda-developers.com/showthread.php?t=1822109
You can use Odin 1.84 or 3.07.
PDA goes in PDA
Phone in Modem
CSC in CSC
Don't touch anything else.
1.84 need pit. without .pit it will fail
3.07 is better no need .pit file.
SemBoyHehe said:
which country are you from? better u flash multi package that have pda, modem and csc file. search on development section. are u already install kies/samsung usb driver? odin detect? have comort??
Click to expand...
Click to collapse
i did Multi pakage also it also doesnt work out for me
I had put PDA in PDA,MODEM in PHONE,MULTI CSC in CSC,BOOTLOADER in BOOTLOADER and PIT file of ODIN version 1.84 :crying:
aniket123 said:
i did Multi pakage also it also doesnt work out for me
I had put PDA in PDA,MODEM in PHONE,MULTI CSC in CSC,BOOTLOADER in BOOTLOADER and PIT file of ODIN version 1.84 :crying:
Click to expand...
Click to collapse
Bootloader..?? Where did you get that?
What error you are getting?
aniket123 said:
i did Multi pakage also it also doesnt work out for me
I had put PDA in PDA,MODEM in PHONE,MULTI CSC in CSC,BOOTLOADER in BOOTLOADER and PIT file of ODIN version 1.84 :crying:
Click to expand...
Click to collapse
Are u read my 1st post? Why use odin 1.84?? Use odin v3.07. No need put .pit just put pda, modem and csc only. Hmm. Read first man.
aniket123 said:
It showed failed check the process
1.downloaded firmware
2.opened odin and put in the PDA file
3.went in download mode and connected to pc
4.started the process
5.it failed
if i was wrong please correct me!
Click to expand...
Click to collapse
if you are using windows 7.then while opening odin,,donot double click.right click first then select RUN AS ADMINISTRATOR.....it wont fail then..i guess
SemBoyHehe said:
Are u read my 1st post? Why use odin 1.84?? Use odin v3.07. No need put .pit just put pda, modem and csc only. Hmm. Read first man.
Click to expand...
Click to collapse
Brother i have done it with odin v3.0.7 as well as odin v1.8.4
---------- Post added at 09:37 PM ---------- Previous post was at 09:35 PM ----------
Ankur19 said:
if you are using windows 7.then while opening odin,,donot double click.right click first then select RUN AS ADMINISTRATOR.....it wont fail then..i guess
Click to expand...
Click to collapse
User of Windows XP
Thanxx..
Sent from my GT-S5830i using xda premium
....
Hit ThanX If I helped you !!
Lalit Patil said:
Thanxx..
Sent from my GT-S5830i using xda premium
....
Hit ThanX If I helped you !!
Click to expand...
Click to collapse
did that help??