Related
for some reason i went to reboot my phone and it wontboot just hangs.. can boot to recovery and do a factory reset.. but still wont boot.
cannot boot to download mode with vol up keypad and power.. just continually reboots to the samsung white message and starts over.. any suggestions or should i just send it back?
got it working whey.. it wouldnt boot up to recovery.. got it to goto recovery during a boot loop by plugging in usb.. i think.. the only think i can think is that earlier today i replace the mms.apk and mms.odex with an earlier version from jf3.. didnt like that at all. but i didnt reboot till later.. this was to try and work around the messaging bug in jg1.. .since i had to reinstall i am happy to report as previously reported that the the csc from jff messaging works fine the the modem and core files from jg1.. (that is what i reflashed it too..)
[Q] Help! Think I bricked my phone!!
Flashed to WJG1
Started Odin,it started to do its thing.halfway through I got the USB disconnect sound.Odin stopped , I now have a green screen
And u cant boot it to either restore or download mode?
Sent from my GT-I9000 using XDA App
Remove battery! put it in again!
Start in download mode! (volume down+home+power)
and reflash!
Keeps on happening.Have tried WJG1 and WJG5.With WJG5 I thought it was going to work.Got 3/4 of the way then it disconnected.
saldawop said:
Keeps on happening.Have tried WJG1 and WJG5.With WJG5 I thought it was going to work.Got 3/4 of the way then it disconnected.
Click to expand...
Click to collapse
Did you use the other 512.pit file? and did you check re-partition?
Make some screenshots!
Yes to both
Did you install the latest version of Kies? (just for the driver?)
And did you close kies before you started flashing?
I think its worked.
YESSSSS
Im on WJG5 ....shall I just leave it on that. I thought I would roll back to JG1 with r2, as I was having problems with it forever scanning the SD Card, and with MTP mode keep on flashing ...initializing.
Which it is doing right now
I have the latest version of Kies installed...and I never open it.
Edit: SHOULD I be able to roll back to an earlier firmware?
saldawop said:
I think its worked.
YESSSSS
Im on WJG5 ....shall I just leave it on that. I thought I would roll back to JG1 with r2, as I was having problems with it forever scanning the SD Card, and with MTP mode keep on flashing ...initializing.
Which it is doing right now
I have the latest version of Kies installed...and I never open it.
Edit: SHOULD I be able to roll back to an earlier firmware?
Click to expand...
Click to collapse
As far as i know you can flash whatever firmware you would like! the best option right now is to use JG5!
Correct me if i'm wrong!
Are you on WJG5?
Do you have any problems?
The MTP constantly initializing (Not sure thats a real problem as I turn it off and use mass storage, but it should work so I want it to)
The constant Media Scanning.
Doesnt feel particularly quick.
And with WJG1+r2 I could run scripts for lag and market and it was pretty quick.
Can I run the scripts with WJG5?? r2 made it nice and easy.
saldawop said:
Are you on WJG5?
Do you have any problems?
The MTP constantly initializing (Not sure thats a real problem as I turn it off and use mass storage, but it should work so I want it to)
The constant Media Scanning.
Doesnt feel particularly quick.
And with WJG1+r2 I could run scripts for lag and market and it was pretty quick.
Can I run the scripts with WJG5?? r2 made it nice and easy.
Click to expand...
Click to collapse
Yes i am on WJG5! you can root it and you can use the lagfix!
I am currently using it without the lagfix and it works great! no blackscreens whatsoever!
Question! did you remove the simcard and sd card when you where flashing with odin?
It shouldn't be scanning for media all the time! don't know whats wrong!
Yes I did.
Following a tutorial which says to uninstall Market from Applications.When I go to Applications(clicking Fliter>All) and bringing up Market there is no option to delete
Here mate, have a look at some suggestions.
And some other quick - you should have run kies before the flashing, so it would install all the drivers, it might be your problem.
Maybe a moderator can pin this, ot some other inbricking topic/guide?
Link to tutorial - http://forum.xda-developers.com/showthread.php?t=725858
Yeah but I have flashed it about half a dozen times previous with no problems.
Well, I dont know what happened, but after setting up my phone pretty much as it was before I thought "I didnt do a factory reset after flashing the rom", so I did so.Rebooted,went to Market and all apps are showing
What does a factory format do??
I thought it would wipe everything off the phone?
After doing one on my newly flashed SGS, I had a look at the SD card and all the folders of games/programs were still there.
i was afraid too when i flashed with the latest firmware last week
odin did nothing, so after 10 mins i remove the usb cable and put it again
then restart computer and put the usb cable ... but the computer didn't see the phone
i turn off the phone, it turn on automaticaly with a nice logo with a phone and a computer... like the phone wana tell me : "You dumb idiot, you bricked me"
I was near to be killed (its my wifes mobile, not mine) but then i tried to return into download mode and it worked and lucky the computer saw the phone
ps: i did this night, when my wife was asleep, so she didn't noticed, but if she noticed or if it was bricked ... well i guess she would kicked my ass and i would be 500box poorer
Flashed today my GT-I9000 to TO froyo I897UCJI6. I know i should not have done that now. But i really got pissed today at the gps of my phone and when i saw and update for galaxy s i just went for it, haven't checked the phone variant version. Thing is now my phone has no gps whatsoever it boots up fine but, sound only shows when i plug my headphones, accelerometer dont work correctly and so on....
So i though i`ll flash it back to stock. But the thing is once i connect the usb cable the phone just reboots and stays dead until the usb is disconnected.
I read the other threads but found no similar issues.
Here is a brief video of my problem
-http-://-www-.youtube.-com/-watch?v=MtcCvfCbAFk-
Remove all "-"
since i can`t post links
Anyone has any ideas how to get me back to stock?
Thanks!!
Damn i can`t even charge it!
Kinda weird indeed, try to remove the battery, wait a little, insert the battery and go to download mode (volume - / home / power) then start odin, put all files needed, and connect the usb, if it doesnt reboot hit start...
you got to enable adb debugging on your phone then open a command window and type: adb reboot download connect the usb to the phone and hit the enter key for the adb command before your phone fall asleep, then you are in download mode an can flash any rom with odin.
hope this helps, i flashed the same wrong firmware from the Vibrant.
Thanks Franklin, i tried the battery trick to no luck.
This is i cannot put my phone back to download mode because my "HOME" button is not mapped to do anything, seems like the "RETURN ARROW" button does the fuction when the system is loaded.
Any other ways to flash it back? Sd card or something?
Thanks for replies ;]
please try it my way it worked for me and i think it will work for you
I open the cmd navigate to c:\androidsdk\tools\ type in adb reboot download hit enter, it mounts daemon tools i plug in usb cable and 3 seconds later the phone goes blank and it stays unresponsive(no 3 key combination, not even the power button can turn it back on) i unplug the usb cable and the phone automaticaly shows the AT&T logo and starts up. The same happens when i plug my charger in!. Does that mean my SGS usb port is fried or something? Is there another way to flash my pnoe back to stock ROM?
I am so sorry i tried to make it better :[
Any clues?
no this is NOT a defective phone, its the result of the ROM and the 3 Button combo can´t work oh and you dont really mean deamon tools? and you musst plug the usb cable in the phone right before you hit enter or it can´t work!
I did that too. Like i said the phone turns it self off once the usb cable is attached.
Here is a brief video of my problem
-http-://-www-.youtube.-com/-watch?v=MtcCvfCbAFk-
remove all "-" from url.
dainiuxxx, this thread belongs in the Q&A section, not in development. Take a moment and read the "STOP, READ THIS BEFORE POSTING" thread at the top of both of these sections, it has clear guidelines for proper thread placement.
Sorry for that sirphukee.
Any help? Anyone?
Anyone that can help?
have you tried plugging it into another PC or Laptop?
Yup tried amothe laptop, reboot.
Wall charger, reboot.
So i`m kinda out of options?
yes, return it to the store, to get an exchange
a normal working SGS does not reboot when plugged into any USB port/charger
it's Shorted (damaged) for some reason
ok, return sounds good to me, but what will i have to say when they`ll switch on the phone and see the AT&T logo?
I`m in UK and my network is Orange UK.
Will they accept it back with no problems, i kinda doubt that....
uhh... you are in quite a pickle ...
try to remove the evidence, intentionally use a Update.zip ROM flash to kill the flash
or flash it to stock if you find a good ROM via Update.zip
use the WiFi to download the Update.zip ROM flash to the root of the internal SD to flash it.
ROM Manager can get the same results, you can WiFi install it from Market
AllGamer said:
uhh... you are in quite a pickle ...
try to remove the evidence, intentionally use a Update.zip ROM flash to kill the flash
or flash it to stock if you find a good ROM via Update.zip
use the WiFi to download the Update.zip ROM flash to the root of the internal SD to flash it.
ROM Manager can get the same results, you can WiFi install it from Market
Click to expand...
Click to collapse
Installed ROM manager from market, but seems it needs the phone rooted, right?
And rooting can be done only via usb cable, right?
Where do i find a Update.zip ROM via Wifi? and what are the procedures when i do find it?
OK,
so obviously the question now is HOW DO I F...k up my phone completely so no one could see what was done to it. When i`ll take it back to the shop.
dainiuxxx said:
Installed ROM manager from market, but seems it needs the phone rooted, right?
And rooting can be done only via usb cable, right?
Where do i find a Update.zip ROM via Wifi? and what are the procedures when i do find it?
Click to expand...
Click to collapse
you can ROOT the phone within the phone itself
by downloading Ryzaa One click lag fix from the market
instead of installing the lag fix, select the option to ROOT the phone
Same issue here. Amazing how easy it is to mess this phone up when you are really stupid. Oh well....
Tried the one click lag fix to root it, but cannot find a way to get into download or recovery mode. Tried every button combo I have seen suggested, but either gets stuck in a loop on the AT&T screen or just boots into the OS.
At the moment I feel my only option if we cannot find a way to get into download mode is to format the internal SD card and send it back to o2 (my provider), tell them it fried when Kies tried to do an update, cross my fingers and hope they send me a new one.
So lately i have been having a ridiculous amount of issues on my phone. RAM was constantly used up it kicked me out of programs all the time, battery sucked, itd be laggy and jumpy power button stopped working etc. so last night i decided screw it i was sick of it and i was just going to start fresh so first i just did the system reset or whatever on the phone.
Now heres the problem, after the reset i turn the phone on it boots up and goes to the tutorial, when i either skip the tutorial or finish it i get an error message saying the tutorial isnt working properly and asking to force close. so i close it and then all i get is a black screen with the clock on the top. Not of the buttons on it work and it wont do anything but pull down the menu.
ive tried the odin 1 click master clear but it and my computer wont recognize the phone along with me putting it into download mode and trying to flash to stock. Odin doesnt see it and my computer says the drivers are broken and it wont recognize the device.
I re-installed all the drivers but the same results occur. I did however manage to have my computer see it when i put it in samsung keis mode (can still choose that from the drop down menu when i plug it in) however i dont know if that will help anything.
So any and all help will be greatly welcomed as i now am without a phone and need it very soon. Thanks
Delldorado said:
So lately i have been having a ridiculous amount of issues on my phone. RAM was constantly used up it kicked me out of programs all the time, battery sucked, itd be laggy and jumpy power button stopped working etc. so last night i decided screw it i was sick of it and i was just going to start fresh so first i just did the system reset or whatever on the phone.
Now heres the problem, after the reset i turn the phone on it boots up and goes to the tutorial, when i either skip the tutorial or finish it i get an error message saying the tutorial isnt working properly and asking to force close. so i close it and then all i get is a black screen with the clock on the top. Not of the buttons on it work and it wont do anything but pull down the menu.
ive tried the odin 1 click master clear but it and my computer wont recognize the phone along with me putting it into download mode and trying to flash to stock. Odin doesnt see it and my computer says the drivers are broken and it wont recognize the device.
I re-installed all the drivers but the same results occur. I did however manage to have my computer see it when i put it in samsung keis mode (can still choose that from the drop down menu when i plug it in) however i dont know if that will help anything.
So any and all help will be greatly welcomed as i now am without a phone and need it very soon. Thanks
Click to expand...
Click to collapse
If Odin isn't being friendly to your phone, try using Heimdall. You can get all the same things you need from Odin, but it's a different set of drivers and a different program, which might solve your issues.
If you need one, here's a Heimdall One-click to stock Froyo that AdamOutler made. It's really easy to use - just download it, let it install, and click flash.
alright ill try it and see how it goes thanks a lot
no luck. Heimdall doesnt recognize it connected and my computer still says it wont recognize it so im guessing thats the main issue first...
Delldorado said:
no luck. Heimdall doesnt recognize it connected and my computer still says it wont recognize it so im guessing thats the main issue first...
Click to expand...
Click to collapse
If you haven't already, try turning your phone and computer off. Then reboot the computer and let it settle. Once it's all set up, move your USB cable to a port at the back of the computer (or somewhere else on the computer if it's a laptop).
Once you've done that, start up Heimdall. Once it's up and settled, start up your phone in download mode, then hook up the phone.
both have been restarted a couple times but ill try that again. i grabbed a different usb cable as well. this time it allowed heimdall to recognize the device at first but when i started it said no drivers and it i followed the instructions it said after however the options heimdall said werent available. im confused why it would so no drivers as i just reinstalled them and when i plugged the phone in for heimdall it said drivers installed.
but no at the end of trying a couple times the device is back to unrecognized and heimdall cant see it
Delldorado said:
both have been restarted a couple times but ill try that again. i grabbed a different usb cable as well. this time it allowed heimdall to recognize the device at first but when i started it said no drivers and it i followed the instructions it said after however the options heimdall said werent available. im confused why it would so no drivers as i just reinstalled them and when i plugged the phone in for heimdall it said drivers installed.
but no at the end of trying a couple times the device is back to unrecognized and heimdall cant see it
Click to expand...
Click to collapse
Heimdall uses a different set of drivers (libusb) instead of the ones that samsung provides. I would suggest that you go ahead and uninstall the Heimdall drivers as well as the samsung drivers, reboot the computer, and run Heimdall again. Let it finish installing the drivers and be ready, then reboot one more time and try again.
eventually got it working and got it back to stock 2.2 however my 3g isnt working and when i try to run the update on the phone to gingerbread it wont connect to att. i thought maybe i could just flash up to gingerbread but when i put it in download mode and connect it odin still doesnt recognize it and this was after rebooting both
Delldorado said:
eventually got it working and got it back to stock 2.2 however my 3g isnt working and when i try to run the update on the phone to gingerbread it wont connect to att. i thought maybe i could just flash up to gingerbread but when i put it in download mode and connect it odin still doesnt recognize it and this was after rebooting both
Click to expand...
Click to collapse
If you were able to get it to work with Heimdall, and you're wanting to go to stock GB, I would suggest using Adam's UCKH3 Heimdall One-click. This will flash stock AT&T Gingerbread (well.. technically that doesn't exist yet, but..) and the i897 Gingerbread bootloaders at the same time.
Just make sure you have all your important stuff backed up to something that isn't your phone before you do it, and that you have a good connection between your computer and phone.
well that one worked so thanks but still no 3g or any data connection
Delldorado said:
well that one worked so thanks but still no 3g or any data connection
Click to expand...
Click to collapse
Just to check, make sure your IMEI matches the one on your phone.
To do this (assuming you're on AT&T), go to the dialer and type *#06#.
Write down that number, then open your battery case.
Take out the battery, and look on the sticker with the barcode. Above the first barcode should be your phone's IMEI. Double check to make sure those match.
If not, you may have some issues with the contents of your /efs folder.
nvm i figured it out. had to reset the access points or whatever to default. now onto to re rooting. thanks for all the help. know anything about the power button not working? i thought it mighta just been the software before but its still not working. do fixes exist? because i really hate using AnyLock to use my phone.
Delldorado said:
nvm i figured it out. had to reset the access points or whatever to default. now onto to re rooting. thanks for all the help. know anything about the power button not working? i thought it mighta just been the software before but its still not working. do fixes exist? because i really hate using AnyLock to use my phone.
Click to expand...
Click to collapse
It's possible it's dirty and needs cleaning - canned air might be a good solution.
is there a heimdall gb root? cuz as usuall all the odin ones never detect my phone
Delldorado said:
is there a heimdall gb root? cuz as usuall all the odin ones never detect my phone
Click to expand...
Click to collapse
If you're wanting one that's rooted and has CWM, check out the one in my signature. It's stock KH3 gingerbread, with CWM, rooted, but no bootloaders.
hey just wanted to thank you for helpin me out all day. that last heimdall gb helped me about immensely. ive finally been able to install some custom roms and what not successfully. i used to follow every direction super close and nothing ever worked but finally going my way so thanks a bunch ha
Hi all kind bros and sis,
Please help me out as I think I've really bricked my less than 2 months brand new Optimus 2X..
You see.. I rooted my P990 using unlock root and chanced upon CM7 and thought of giving it a try. I installed clockworkmod and downloaded the stable release of 7.1 for Optimus 2x.. following the instruction to do a Nandroid backup and proceeded with the Mod..
Not knowing that I need to wipe everything including data.. I just selected the Dalvik cache wipe and proceed with the mod. The process went for more than 15mins and I saw some graphics (the android figure going round and round) but it just stuck there... the screen went blank and when I touched those home or back buttons.. they will lighted but nothing happens. I can't power it off also. So I manually took out the battery and put it back before powering up again. The android picture appeared again briefly for about 1 min and just hanged there. I took out the battery again and this time it was dead.. no matter what I press : vol + and power buttons together; home+Vol+ + power down; Vol- + power down.. all those do not revive the phone.
I tried taking out the external SD card and try powering up. The LG logo appeared and got stuck there.
I searched on Google and found the smartflashtool. I tried that and managed to install the NVidia boot recovery driver and stuff correct. Hold the vol+ button and power key before plugging in but the smarttool did not find the com port or communication driver whatever so I couldn't flash it back to stock.
I'm very desperate and stuck now... did I just accidentally burned the board or something? What bad luck I have
If that's the case, will I still be able to bring the phone back to LG service centre and get it repaired?
Please help me.. any kind souls out there. I really liked the phone and hoped to bring it back. else it's such a shortlived phone... really breaks my heart to see this..
Thanks in advance...
humblepie88 said:
Hi all kind bros and sis,
Please help me out as I think I've really bricked my less than 2 months brand new Optimus 2X..
You see.. I rooted my P990 using unlock root and chanced upon CM7 and thought of giving it a try. I installed clockworkmod and downloaded the stable release of 7.1 for Optimus 2x.. following the instruction to do a Nandroid backup and proceeded with the Mod..
Not knowing that I need to wipe everything including data.. I just selected the Dalvik cache wipe and proceed with the mod. The process went for more than 15mins and I saw some graphics (the android figure going round and round) but it just stuck there... the screen went blank and when I touched those home or back buttons.. they will lighted but nothing happens. I can't power it off also. So I manually took out the battery and put it back before powering up again. The android picture appeared again briefly for about 1 min and just hanged there. I took out the battery again and this time it was dead.. no matter what I press : vol + and power buttons together; home+Vol+ + power down; Vol- + power down.. all those do not revive the phone.
I tried taking out the external SD card and try powering up. The LG logo appeared and got stuck there.
I searched on Google and found the smartflashtool. I tried that and managed to install the NVidia boot recovery driver and stuff correct. Hold the vol+ button and power key before plugging in but the smarttool did not find the com port or communication driver whatever so I couldn't flash it back to stock.
I'm very desperate and stuck now... did I just accidentally burned the board or something? What bad luck I have
If that's the case, will I still be able to bring the phone back to LG service centre and get it repaired?
Please help me.. any kind souls out there. I really liked the phone and hoped to bring it back. else it's such a shortlived phone... really breaks my heart to see this..
Thanks in advance...
Click to expand...
Click to collapse
Try using SmartFlashTool, download the LG stock ROM (can be found here in XDA forum, i'll help you find the link), flash the .bin and .fls files.
humblepie88 said:
Please help me out as I think I've really bricked my less than 2 months brand new Optimus 2X..
...
"Hold the vol+ button and power key before plugging in but the smarttool did not find the com port..."
Click to expand...
Click to collapse
Turn off the phone. Hold Vol-DOWN while plugging it in. Start Smartflash and see the com-ports magically appear.
Follow trymhansen's instructions. He helped me before with my softbricked phone.
I hope you get your O2X back to life! Keep us posted
Best of luck to you!
PS. I also believe you should pull out the battery after turning off the phone in Trym's instructions. Trym correct me if I'm wrong please.
Hi All,
Thanks for your kind replies. I did follow your instruction. Take out the battery (I removed the ext SDcard as well), press and hold -vol and plug in the phone via USB. Afterwhich start up smartflash tool.. still nothing happens and no com ports are found.. The version of smartflashtool that I used is Dec 2010. Do I need to get the latest one and also the LG united drivers installed?
I also tried starting smartflash tool before the sequence.. still the same. BTW.. my OS is Win 7. Is it supported?
Really at my end's wit. Hope I can bring my phone back to life soon and I'm not really bricking it. I heard Samsung phones are not that easy to brick and can get to the recovery mode pretty easily. is it true?
Please help me.. thanks
Hi bros,
Attached are my screenshots from the device manager and smartflash tool... both seems not able to find the phone and allocate a com port. I've tried installing the latest LG mobile driver 3.6 but no help as well
Have you followed instructions as described here http://forum.xda-developers.com/showthread.php?t=1008070 ?
Also, try to attach your phone directly to computer, using usb ports from computer mainboard. I have experienced problems when attaching it via extension usb cord or attaching it to computer case ports. (I hope that you can understand what I have mean to say with usb )
Hi Memhis,
Yes.. I followed exactly the instructions from the thread and I've plugged into a USB port directly to the computer which is one of the ports in front.. not via any extension or USB hub.. still it did not detect.
I'll try to use another computer which is running Win XP and try again. I've downloaded those 3 files from that thread you recommended try using those instead.. hope it can be detected this time else I think I'll have to send to LG service for repair tomorrow.
I've been jailbreaking and modding my Iphone a lot and everytime whenever there's a near brick situation.. I'm able to fix it but not this time with an Android or LG perhaps... I hope I don't have to go to the extend of using ADB low level to push some files which I saw in one of the thread that one of the guys did that.. but I doubt I can since my windows can't even detect the phone!!
Maybe this will be my first and last LG phone if I ever get it repaired...
humblepie88 said:
Hi Memhis,
Yes.. I followed exactly the instructions from the thread and I've plugged into a USB port directly to the computer which is one of the ports in front.. not via any extension or USB hub.. still it did not detect.
I'll try to use another computer which is running Win XP and try again. I've downloaded those 3 files from that thread you recommended try using those instead.. hope it can be detected this time else I think I'll have to send to LG service for repair tomorrow.
I've been jailbreaking and modding my Iphone a lot and everytime whenever there's a near brick situation.. I'm able to fix it but not this time with an Android or LG perhaps... I hope I don't have to go to the extend of using ADB low level to push some files which I saw in one of the thread that one of the guys did that.. but I doubt I can since my windows can't even detect the phone!!
Maybe this will be my first and last LG phone if I ever get it repaired...
Click to expand...
Click to collapse
launch smartflashtool first, extract the .fls and .bin files, hold down volume at the same time plug in the usb port to your comp. you must see a s/w updating logo in your phone's screen and smartflash should detect your phone. then click start!
Sent using a phone.
Hi mrgian,
I just tried to revive my phone by using the same method on a different laptop running on Win XP.. plugged directly to a side USB port but still no luck. There's no s/w updating logo appearing on my phone and smartflashtool also failed to detect my phone. I've found another thread opened by another user and my situation is exactly the same as his :
http://forum.xda-developers.com/showthread.php?t=1161583
But lucky for him is that he's able to get it working after changing to another PC but I've tried 3 different machines and no luck so far...
I'll try to use the NVflash as a last resort and see if I've any luck with NVflash at all.. If it failed again.. I think I've no choice but to send it to the repair centre for servicing then..
humblepie88 said:
Hi mrgian,
I just tried to revive my phone by using the same method on a different laptop running on Win XP.. plugged directly to a side USB port but still no luck. There's no s/w updating logo appearing on my phone and smartflashtool also failed to detect my phone. I've found another thread opened by another user and my situation is exactly the same as his :
http://forum.xda-developers.com/showthread.php?t=1161583
But lucky for him is that he's able to get it working after changing to another PC but I've tried 3 different machines and no luck so far...
I'll try to use the NVflash as a last resort and see if I've any luck with NVflash at all.. If it failed again.. I think I've no choice but to send it to the repair centre for servicing then..
Click to expand...
Click to collapse
does the laptop have lg drivers installed?
Sent using a phone.
inflance hotota
mrgian said:
does the laptop have lg drivers installed?
Sent using a phone.
Click to expand...
Click to collapse
Yes.. I've installed the latest LG united mobile driver version 3.6. Any wrong with that version... Really don't know where / what is missing or my phone is really fried after just one mod attempt?
I've also tried NVflash and it's stuck at the "bootloader initialization" screen....
Nothing appeared on the phone... not even LG logo. Can't believe LG phones are so fragile and unmodifiable
humblepie88 said:
Yes.. I've installed the latest LG united mobile driver version 3.6. Any wrong with that version... Really don't know where / what is missing or my phone is really fried after just one mod attempt?
I've also tried NVflash and it's stuck at the "bootloader initialization" screen....
Nothing appeared on the phone... not even LG logo. Can't believe LG phones are so fragile and unmodifiable
Click to expand...
Click to collapse
can you entet CWM? Press volume down til s/w will appear.
Sent using a phone.
try to charge the battery first...power off your device and charge it...maybe leave it charging for about 1hr even if you dont see anything on the screen( i believe after plugin the charger you will see the charging logo but it will disapear after a few seconds)...after 1 hr unplug and try to check if it will boot to clockwork recovery...if yes then just do complete data wipe...also try installing the ext3 back.zip, it will help delete system files(sometimes CWR is not deleting this)...hope this help
chupi_24 said:
try to charge the battery first...power off your device and charge it...maybe leave it charging for about 1hr even if you dont see anything on the screen( i believe after plugin the charger you will see the charging logo but it will disapear after a few seconds)...after 1 hr unplug and try to check if it will boot to clockwork recovery...if yes then just do complete data wipe...also try installing the ext3 back.zip, it will help delete system files(sometimes CWR is not deleting this)...hope this help
Click to expand...
Click to collapse
you got a point there.
Sent using a phone.
humblepie88 said:
Yes.. I followed exactly the instructions from the thread and I've plugged into a USB port directly to the computer which is one of the ports in front.. not via any extension or USB hub.. still it did not detect.
Click to expand...
Click to collapse
When you say an USB port in the front do you mean an USB in the back? Because the ones in front are the case ones, the ones in the back are the good ones, i.e. the ones that are directly attached to the mobo.
LarsPT said:
When you say an USB port in the front do you mean an USB in the back? Because the ones in front are the case ones, the ones in the back are the good ones, i.e. the ones that are directly attached to the mobo.
Click to expand...
Click to collapse
I've tried the recovery via 2 diff laptops and plugging in directly to one of the side USB ports but to no avail as well.. I think I've plugged in the phone correctly but there's no reaction at all/
mrgian said:
can you entet CWM? Press volume down til s/w will appear.
Sent using a phone.
Click to expand...
Click to collapse
How to enter CWM? I can't even power up the phone and no reaction at all when plugged into USB via smartflash.. the screen remains black. It's liked the whole phone is burned or something... but strange thing is that it can detect APX and asked to install drivers... but after successfully installing the Nvidia boot recovery driver.. the com ports does not get discovered.. What is wrong?
chupi_24 said:
try to charge the battery first...power off your device and charge it...maybe leave it charging for about 1hr even if you dont see anything on the screen( i believe after plugin the charger you will see the charging logo but it will disapear after a few seconds)...after 1 hr unplug and try to check if it will boot to clockwork recovery...if yes then just do complete data wipe...also try installing the ext3 back.zip, it will help delete system files(sometimes CWR is not deleting this)...hope this help
Click to expand...
Click to collapse
I plugged in the phone with battery but there was no charge logo or whatever.. the screen remains blank.. I'll try to leave it charging and see what happens. But I've remembered there was still about 80% power when this disaster happened and I've taken out the battery since.. so the charge should have remain? Btw.. where can I get this ext3 back.zip and how to use it? thanks
Hey guys,
First off, from a xda noob, that video you have to see at registration - genius.
Second, to get down to business, I have this stupid X8 (11W48, if it means anything to you) that has been giving me trouble since I got it.
It restarted itself randomly, which was not that big a deal until it started happening every hour or so,
then it started giving me errors all the time (I couldn't in any way enter my settings, force closes it),
and now finally, after trying the button combinations to force a factory reset, it's on constant loop, booting up to the logo and then restarting itself over and over and over again.
I never actually did anything to it, except for the usual apps from the market and stuff, so I guess that wouldn't cause the issue.
Now I don't quite know what to do. I can't go for PCC or Flashtool, really, cause I've tried - it tells me it recognizes the device (provided it doesn't restart right away and kill the connection) but the debugging mode or something is not turned on.
How the duck can I factory reset it? Or fix it at all?
And yes, I've tried searching, but I haven't come across a problem like this.
Please don't tell me to send it to Sony or something :crying:
Thanks
Hey,
Unfortunately I think you've a damaged x8..
I'd send to sony cause there is nothing you can do in the condition it's in. You need usb debugging on to attempt to fix it.
Maybe remove battery for an hour or so. Let the phone go cold inside.
You might get into settings upon reboot.
Good luck!!
Elextrica said:
Hey guys,
First off, from a xda noob, that video you have to see at registration - genius.
Second, to get down to business, I have this stupid X8 (11W48, if it means anything to you) that has been giving me trouble since I got it.
It restarted itself randomly, which was not that big a deal until it started happening every hour or so,
then it started giving me errors all the time (I couldn't in any way enter my settings, force closes it),
and now finally, after trying the button combinations to force a factory reset, it's on constant loop, booting up to the logo and then restarting itself over and over and over again.
I never actually did anything to it, except for the usual apps from the market and stuff, so I guess that wouldn't cause the issue.
Now I don't quite know what to do. I can't go for PCC or Flashtool, really, cause I've tried - it tells me it recognizes the device (provided it doesn't restart right away and kill the connection) but the debugging mode or something is not turned on.
How the duck can I factory reset it? Or fix it at all?
And yes, I've tried searching, but I haven't come across a problem like this.
Please don't tell me to send it to Sony or something :crying:
Thanks
Click to expand...
Click to collapse
Use flashtool....
You don't need to turn on your phone for that...
Here..
http://forum.xda-developers.com/showthread.php?p=35338935
Sent from my E15i
don't be panic at this moments, your X8 is just Softbricked Okay! just SOFT.
if it still shows the Sony Ericsson logo,Still vibrate when turn on-its fine.
you need to use PC companion correctly and properly to get the
PC companion recognize your X8
note:-if you have PCC before and used hardly with your X8,PCC may not work properly in repairing our phone
so,
-uninstall completely your PC companion(restart)
-clean Registry and other left over pieces of the PC companion files(Restart)
-download a fresh copy of PC companion here:http://www.sonymobile.com/gb/tools/pc-companion/
-install it and restart
-open PC companion and go to the support Zone(wait it to download approx 2mb)
-and click software update on it
-and then click repair my phone.
Note:the firmware and the updating tool download may take as long as half hour depending on your Internet Speed
that's all, just follow the step on screen just tick tick tick and do what its says.
after that select your X8 if its in the list and its says you need to
plug in your device while holding back button.just do it.and you can see some magic automatically on your PC screen.
after finished unplug your device and turn it on. you will back to original pure 2.1 SE skinned android.
IF YOU HATE DOING THE PROCEDURE AT THE TOP!!!
go to http://androxyde.github.com/
download the flash tool and install it.
you need to download Original X8's firmware you can find in Gogeta's signature
you need to put the X8 firmware in the C:/Flashtool/firmwares/drop it here
open flash tool and click the Flash button and it pop-up with default flash mode just click OK
and it shows a window with 2 firmware with included X10 firmware and the X8 firmware that
you dropped in select X8 carefully and don't click anything just click OK
after you clicked OK you will see couple of logs in the screen and says
preparing files for flashing and after seconds it says you need to
connect your device. and do the on screen procedure,
after it detect the device,MAGIC will happen in your PC screen.
that's all simple procedure.
Requirements:
cool head and clear aye.
I went for the Flashtool way - it worked! Thank you so much!
so that why i say don't be so panic or stressed when doing this type of job.
use Flashtool the way it should be and don't play with it too much!
maybe you will hardbrick your X8 if flash non-X8 firmwares...
use Flashtool when necessarily needed.