Database Develop

[Q] ok new guy here please help !!!!!!!!

OK first i have googled it and have read many threads so plz dont tell me to do so
and im no noob i have a galaxy fit im jus trying to help my lucky friend who has a galaxy s
iv read around but jus thought ill ask
hes on complete stock here are the specs
model no - GT-I9000
Firmware version - 2.3.3
Baseband Version - I9000DDJV4
Kernel Version - 2.6.35.7- [email protected]#2
Build number - GINGERBREAD.DDJV6
now i wanna install darkyrom v10.2
so guys a little help in steps
thank u sooo much

1. Download Darkyrom(version).zip
2.Get into recovery mode(cwm)(Volume up+home+power)
2. Wipe Data/factory reset
3. wipe cache partition
4. Go to advanced->> wipe dalvik
5. Install zip from sd --->> darkyrom.zip
FINISH!!!
Edit: there are sites that says that you have to install the rom with odin, google a bit more, you don't want a bricked galaxy s

Best answer can be found on the Darky's website. Go to http://www.darkyrom.com/community/index.php and look for the rom you want to install and they have instructions on how to do it.
I would suggest trying Darky JVU it is the latest and in my opinion the best Darkyrom

bro he dosent even have cwm its complete stock i was thinking if i somehow gget rom manger to work atleast i cAN GIVE HIM CYANOGEN MOD DIRECTLY FROM ROM MANAGER DOWNLOAD REP

Download the latest stock firmware from the following link:
http://forum.xda-developers.com/showthread.php?t=1102881
Download Chainfire's CWM kernel (link below) for the firmware you installed from the link above.
http://forum.xda-developers.com/showthread.php?t=788108
Now that you have CWM, you can download and install the Darky firmware of your choice.

alaric.m said:
OK first i have googled it and have read many threads so plz dont tell me to do so
and im no noob i have a galaxy fit im jus trying to help my lucky friend who has a galaxy s
iv read around but jus thought ill ask
hes on complete stock here are the specs
model no - GT-I9000
Firmware version - 2.3.3
Baseband Version - I9000DDJV4
Kernel Version - 2.6.35.7- [email protected]#2
Build number - GINGERBREAD.DDJV6
now i wanna install darkyrom v10.2
so guys a little help in steps
thank u sooo much
Click to expand...
Click to collapse
http://www.darkyrom.com/community/index.php?threads/odin-darkyrom-10-2-resurrection-gt-i9000.4272/
the installation instructions are given in the link along with the download link..
this will give you darky rom 10.2 on your friend's phone which will be rooted along with CWM recovery.. after this you can install any rom which you want using the recovery and the instructions given in the op of the rom you chose.

alaric.m said:
bro he dosent even have cwm its complete stock i was thinking if i somehow gget rom manger to work atleast i cAN GIVE HIM CYANOGEN MOD DIRECTLY FROM ROM MANAGER DOWNLOAD REP
Click to expand...
Click to collapse
Bro look at the kernel name -.-

Just install semaphore kernel with odin by downloadin kernel and put in pda slot in odin. Put the phone into download mode by using vol down home and power. Plug phone in and hit start. Make sure you have the drivers installed(samsung kies) and it recognizes the phone. When its done flashing in about 10 seconds it will reboot. Now power down the phone and hold vol up home and power. That will bring you into cwm recovery. Make sure you have darky rom on sd card. Do factory reset and go to install zip from sd card and install darkyrom zip. It will then install and reboot. It will take a while so just wait. If it boot loops put it into recovery again and reflash the zip file again. Please hit thanks and happy flashing!
Sent from my GT-I9000 using XDA

Im curious, if your on 2.3.3, can you restore a 2.3.5 back up

[Q] SGH-T849 with CM7, stuck booting to recovery

Greetings friends,
I am a tablet flashing veteran and I need your help. I have a Samsung Galaxy Tab 7" T-Mobile (SGH-T849) which I have flashed to CM7 using Heimdall. The flash appeared to be successful, and I used the Clockwork Recovery app to flash the recovery module. Now, no matter what I try, the tab will ONLY boot into recovery. It will not boot to an OS.
I can even use the CWM recovery console to flash a new image, but it restarts back to recovery!
I've been searching for the stock firmware to see if that gives me control, but all of the download links are broken. To make matters worse, this tablet isn't mine, so I'm facing the fact that if I can't recover this thing, I will have to pay to replace it.
I am able to get it to download mode, and I've tried ODIN'ing several images as well, but still, it just restarts to the darn recovery console.
Please help!
Thanks.

restock using Overcome Method:
Go to overcome site
Http://www.teamovercome.net
Read the guide,
Missing pictures can be seen here.
http://forum.xda-developers.com/showthread.php?p=20974872
Follow the picture step by step.
Basically to restock:
Download GB-stock-safe-v5.zip, unzip it and and flash with ODIN according to the guide.
Stop there and you will have Gingerbread JQ1
You can continue with the rest, and you will get Overcome 4.1 and you won't regret.
From there you can then try AOKP or CM9, all requires you to have Overcome Kernel with its CWM recovery to flash.

[Q] Update My Galaxy Tab 7' P1000 - ICS

I already rooted with using superoneclick, and i wanna know how to install ICS on my tab please help me. (super user it there)
Model Number
GT-P1000
Firmware Version
2.3.3
Baseband Version
P1000XXJPZ
Kernel Version
2.6.35.7
[email protected]#2
Build Number
GINGERBREAD.XXJQ1
PLEASE TELL ME HOW TO UPDATE.

Go to http://www.teamovercome.net
Just in case you don't know, overcome is Gingerbread.
You only want overcome kernel as stepping stone so you have a cwm recovery.
Once you have cwm recovery, you can flash anything, including ics.
Since you are already on JQ1, I don't think you need to follow the whole flashing their stock safe rom, since it is also a JQ1.
just grab the overcome kernel 4.0 tar, and also download ics cm9 or aokp ( your pick, go thier individual thread and read up) and latest gapps, put them on sdcard.
I think you do factory reset first, then flash overcome kernel using Odin.
Then boot into cwm recovery by pressing volume up and power on at the same time.
From recovery flash ics and then flash gapps.
Sent from my GT-P1000 using XDA

Actually more choices of rom now, SGT7 ICS by cdesai (also recommended) and Gummy (not recommended for now seems very buggy, although it has better theme).
After following priyana's instruction,
Remember, as mentioned in each instruction on the perspective rom's thread,
You will get a strange 'recovery loop' as if it's failing to install. Just go back to recovery mode (power + volume up)
and reflash the ICS-ROM .zip file.
Welcome to the world of ICS.

thank you guys very much for the information. i am a noob and i really can't see anything how to do this.. please tell me step by step how to do that if so that will be very easy me to do.. i don't know anything about rooting but i already rooted it with superoneclick root and super user is there too i don;'t know what to do with it. please help me.

Have you even visited the site that I recommended?
To help you further,
Go to
http://forum.xda-developers.com/showthread.php?p=20974872
See the guy phloke posted a cached copy of the overcome guide.
Download it, it is a .PNG graphic file.
Read it ten times.
Follow that exactly, and let us know how it goes.
Edit: after that we talk about ics.
Sent from my GT-P1000 using XDA

cj.handy said:
I already rooted with using superoneclick, and i wanna know how to install ICS on my tab please help me. (super user it there)
Model Number
GT-P1000
Firmware Version
2.3.3
Baseband Version
P1000XXJPZ
Kernel Version
2.6.35.7
[email protected]#2
Build Number
GINGERBREAD.XXJQ1
PLEASE TELL ME HOW TO UPDATE.
Click to expand...
Click to collapse
goto this forum first page #1 http://forum.xda-developers.com/showthread.php?p=23097605. it will guide you...

ISC for my GT-p1000 at&t
priyana said:
Have you even visited the site that I recommended?
To help you further,
Go to
http://forum.xda-developers.com/showthread.php?p=20974872
See the guy phloke posted a cached copy of the overcome guide.
Download it, it is a .PNG graphic file.
Read it ten times.
Follow that exactly, and let us know how it goes.
Edit: after that we talk about ics.
Sent from my GT-P1000 using XDA
Click to expand...
Click to collapse
First, thank you for reading this. I had rooted & unlocked my at&t GT-P1000 using custom ROM 4.1.0 from teamovercom in January, 2012. Today, I like to something new and curiousity that can I install ICS custom ROM. But I am still not confident by reading from here: " http://rootzwiki.com/topic/22246-ro...ung-galaxy-tab-p1000ln-gsm-build-38-11062012/ " (please no quote). Now, I'm asking for your generousity and patient to show me what other steps I need to do to flash ICS custom ROM after follow teamovercome user guide, and my tab still able to make/receive call and I have now, thanks again. Pleae, please, and please reply to " [email protected] ".
Best regard,
Van.

you already have Overcome, so it is dead simple
- download ICS (CM9 or AOKP) and gapps-ics and put in external sd card.
- boot to download mode
- you need to use Odin to flash Overcome kerner tar
- once flashed the tab reboots.
- ignore the robotic voice, just force the tab to off
- boot to CWM recover (press vol-up and power )
- flash ICS (CM9 or AOKP)
- after flashing the system will convert your tab to MTD partition, but it will probably bring you to recovery or stuck at boot.
- force reboot to recovery again
- flash ICS again
- immediate after complete, flash gapps
- reboot
To go back to GB you need to do the Odin restock all over again though.

How To get Rid Of Froyo 2.2

my father has a stock samsung galaxy tab (p1) running the horrible android 2.2 with touchwiz all over it
he asked me to update the device so it can run ICS
i've done that with my SGS1 which was easy, but now i have a problem.
when reading the guide for installing cm9, its says "This guide applies to a Samsung Galaxy Tab (GSM) on the stock 2.3 release"
my sgs1 was already running 2.3.4, so i just followed the instruction and that was that, but my fathers tab is stuck on 2.2 and has never been rooted or anything
my question is can i simply just apply the steps or do i have to update the device to 2.3 and then follow the instruction
i cant afford to brick the device or i'll never hear the end of it, he love his tab as if it was his child or something
PS. I've learnt how to root the device using (superoneclick) and i've also found how to flash CWM on it, can i do that and then flash the CM9 Rom to it.
im sorry if missed a similar post somewhere but im still a noob at this and i really wanna do it (froyo + touchWiz is a recipe for a crappy device :silly: )

Use overcome method.
I am sure you have seen so many posts here with the same instruction
(many of them by me too)
http://www.teamovercome.net
Read the guide,
Missing pictures can be seen here.
https://docs.google.com/file/d/0B7k...EyNS00Yzg5LWE0MTktYmYyMjA1MThmYzQz/edit?pli=1
or
http://forum.xda-developers.com/showthread.php?p=20974872
Follow the picture step by step.
missing files at
http://tabfirmware.com/2012/01/romk...e-7-series-v4-1-0-♫-overcome-kernel-v4-0-0-♫/
and missing kernel here
http://forum.xda-developers.com/showpost.php?p=27801159&postcount=8
Basically to restock:
Download GB-stock-safe-v5.zip, unzip it and and flash with ODIN according to the guide.
Stop there and you will have Gingerbread
But since you want ICS, continue reading the guide.
- download ICS (CM9 or AOKP) and gapps-ics and put in external sd card.
- boot to download mode
- you need to use Odin to flash Overcome kerner tar
- once flashed the tab reboots.
- ignore the robotic voice, just force the tab to off
- boot to CWM recover (press vol-up and power )
- flash ICS (CM9 or AOKP)
- after flashing the system will convert your tab to MTD partition, but it will probably bring you to recovery or stuck at boot.
- force reboot to recovery again
- flash ICS again
- immediate after complete, flash gapps
- reboot

priyana said:
Use overcome method.
I am sure you have seen so many posts here with the same instruction
(many of them by me too)
http://www.teamovercome.net
Read the guide,
Missing pictures can be seen here.
https://docs.google.com/file/d/0B7k...EyNS00Yzg5LWE0MTktYmYyMjA1MThmYzQz/edit?pli=1
or
http://forum.xda-developers.com/showthread.php?p=20974872
Follow the picture step by step.
missing files at
http://tabfirmware.com/2012/01/romk...e-7-series-v4-1-0-♫-overcome-kernel-v4-0-0-♫/
and missing kernel here
http://forum.xda-developers.com/showpost.php?p=27801159&postcount=8
Basically to restock:
Download GB-stock-safe-v5.zip, unzip it and and flash with ODIN according to the guide.
Stop there and you will have Gingerbread
But since you want ICS, continue reading the guide.
- download ICS (CM9 or AOKP) and gapps-ics and put in external sd card.
- boot to download mode
- you need to use Odin to flash Overcome kerner tar
- once flashed the tab reboots.
- ignore the robotic voice, just force the tab to off
- boot to CWM recover (press vol-up and power )
- flash ICS (CM9 or AOKP)
- after flashing the system will convert your tab to MTD partition, but it will probably bring you to recovery or stuck at boot.
- force reboot to recovery again
- flash ICS again
- immediate after complete, flash gapps
- reboot
Click to expand...
Click to collapse
thanks a bunch, i'll download the stuff and see how it goes
wish me luck

one last question
when flashing the GB rom, i cudnt see the checked options in ODIN, it seems to me that all three options (auto partition, re-partition and i cudnt even read the last one) should be checked

yes, F. Reset Time (Force Reset Time)
all three checked

thank you so much priyana, and im soo sorry for being such a noob and wasting your time but pls bare with me
everytime i try to root the device using superoneclick the damn thing gets stuck on step no.5 (waiting for devices) is there a workaround this thing or maybe a different program, i've tried rooting my friends device using the same version of the program (his device is gt-i9100G) and it worked perfectly, why this idiot tab is giving me sooo much trouble

No need to root.
Just flash using Odin. Just start from page 7.

Rooting fix
priyana said:
No need to root.
Just flash using Odin. Just start from page 7.
Click to expand...
Click to collapse
thank you so much for your help , i was buzy the last few days but today i've done it, many thanx for your guidenese and taking the time to help a noob like me
as for the rooting i've managed to somehow get it to work
-disable the antivirus
-unmount the sd card
-download and run superoneclick
-click root
-taadaaaa

downgrade
priyana said:
No need to root.
Just flash using Odin. Just start from page 7.
Click to expand...
Click to collapse
can i downgrade from 4.0 to 2.3 by flashing the rom using odin, if its possible, what r the steps
ps im having some problems with the wifi in cm9

Hi, yes, same thing as before
use the guide, start from page 7 where the Odin screen shot is
GB-stock-safe, with pit file selected and "repartition" ticked.
But hang on, you are from middle east.
Do you have wifi cut out when a SIM card is inserted?
That is a known issue with middle eastern tab due to some wifi country code, that affects all Android 4.0
But I could be wrong, you may not have the issue.
Worth a try though:
http://forum.xda-developers.com/showthread.php?t=1445766

i am
and i've never heard about this before, it used to work ok before
all the phones in the house works ok witth the sim inserted connected to wifi
i'll give it a try anyway
back to plan B
i've downloaded a rom for saudi arabia (arabic language support) but the downloaded files is .tar.md5
how can i flash this one

Do try the fix anyway.
Sent from my GT-I9300 using xda app-developers app

Question and doubt: repartitioning, ROM and GApps

Hi guys,
I try to go direct to the point.
I found this tremendly intresting Android developement for N7000: NightOwl 20151030
It is in Android developement sub frum, but I am a newbe and I cannot post there.
In order to flash Lollipop Roms is suggested a repartitioning.
I read this guide: How to re-partition Galaxy Note and install Android 5.1.1 (Link in Nightowl ROM 3D, page 1)
Amazing useful.
My problems:
1. I cannot download the Stock Android 4.1.2 ROM according to the baseband version... site: sammobile
download doesn't work
2. I cannot download SAMSUNG_USB_Driver_for_Mobile_Phones.zip
Same problem, download doesnt start or tooooo slow, and dead before the end.
Any other mirror or site is available?
Thank you in advance!

1. Any latest samsung rom for n7000 would work.
2. Just Google for Samsung USB drivers and you should find a link to samsung's developer site.

Thank you Nokiamodel... I'm going to search.. Thanks!
Sent from my GT-N7000 using Tapatalk

1. You don't need a stock ROM for repartitioning you can use a philz recovery in .tar format
2. If your USB drivers won't work just install Samsung kies it will fix it for you .. But remember to end all kies's processes in task manager before you use odin

N00b... said:
1. You don't need a stock ROM for repartitioning you can use a philz recovery in .tar format
2. If your USB drivers won't work just install Samsung kies it will fix it for you .. But remember to end all kies's processes in task manager before you use odin
Click to expand...
Click to collapse
Please can you guide me step by step to repartitioning my Sam gal gtn7000.
Thanks