Database Develop

Who can help me?

Hi,
Kies offers me a new Version and I confirmed.
The Update goes wrong and now the can`t start.
I can`t send back to Samsung, i bought he Tab in Hongkong :-(
Samsung Germany says "sorry no!
Can anybody reset my Tab, i will pay for help.
Regads Klaus

Can you get in download mode or recovery? Do you see anything on the screen when you try to turn on the tablet?

Hi
Following Message are displayed:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
The Recovery Mode are not work :-(
Regards Klaus

ffbkschulz said:
Hi
Following Message are displayed:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
The Recovery Mode are not work :-(
Regards Klaus
Click to expand...
Click to collapse
This is displayed on tablet?
What happens when you hold volume up while turning tablet on? Do you get two icons? The right one is Download mode, if you can enter it then it should be possible to flash stock firmware with Odin. Check the guide in development forum.

Hi
Nothing
Regards Klaus

Did you try volume up and start button at the same time when starting up?

Hi goenig,
yes i do
regards

Go to dowload menu and try to flash stock recovery in your tab..
Here is the stock recovery for p7300/p7310
Start odin, and put the file in pda slot..
See the detail tutorial for flashing with odin herehttp://forum.xda-developers.com/showthread.php?t=1406137

don't worry. samsung devices are really hard to mess up. you just need to go to download mode and flash a stock rom.
you can download any odin rom that is available in the forums.

samsung tab2 10.1 cannot get in recovery mode
goenieg said:
Did you try volume up and start button at the same time when starting up?
Click to expand...
Click to collapse
i bricked my samsung tab2 10.1. the screen shows firmware upgrade encountered as issuee. please select recovery mode in kies and try again. i cannot get into recovery mode by pressing power button+volume up button. the same page loades again which is firmware upgrade encountered...
please help me out as soon as possible..

Which model
Sent from my SAMSUNG-SGH-I727 using xda premium

naveensai said:
i bricked my samsung tab2 10.1.
Click to expand...
Click to collapse
You seen to be in the wrong forum. You are likely to receive better help if you can locate the forum for your device

Mr. Baugis, i have a problem D:

Hi to everyone.:
I'm from Chile and i have an SAMSUNG GALAXY ACE, model M.
The last night, i install the GREAT Kernel of Mr.Baugis, but i have a BIG PROBLEM.!
I don't now my brother did, but I think it went to recovery mode and made some adjustments(tried to install an android, I think) and restart the phone.I turn on, says the phone model and not pass the screen "Rafael.Baugis Kernel" I have waited up to 10 minutes to do something but nothing.
Really, i need help. I love this cellphone and i need it to work
PS: if the issue is not going here, Move it please
PS2: Sorry for the bad english

Did you try clear data/factory reset and clear the dalvik cache? If you did and still end up in a bootloop, flash a new rom. If that did not work too, flash the default stock firmware through Odin. Hope it helped
This is sent from the moon using a 100gbps connection

Thnaks, but it doesn't work
my pc don't recognize ODIN, but i have all the controlators and the KIES of samsung
CsmDarren said:
Did you try clear data/factory reset and clear the dalvik cache? If you did and still end up in a bootloop, flash a new rom. If that did not work too, flash the default stock firmware through Odin. Hope it helped
This is sent from the moon using a 100gbps connection
Click to expand...
Click to collapse

lalobad said:
Thnaks, but it doesn't work
my pc don't recognize ODIN, but i have all the controlators and the KIES of samsung
Click to expand...
Click to collapse
If you are able to get your phone in download mode (volume up + volume down + power) then simply follow any guide from this section explaining how to flash multipackage stock firmware. If ur phone is not getting detected in odin, that is also explained in multiple threads here. As long as u can get the phone in download mode, you should be able to fix the problem. Let me know if u still need exact directions
Sent from my GT-S5660 using xda app-developers app

I had the same problem like you have.
At first you must uninstall Samsung Kies and install these http://www.mediafire.com/?n412p5v6golq4sn official USB-Driver from Samsung.
Start Odin 1.85 and Run it as Admin if you have Win7. Connect your Ace and check if your device get displayed in Odin.
Then go into the download mode and flash your firmware.
If you can't get into the Download Mode you must buy a USB-Jig from Amazon or wherever.

thanks
JB|Fabo said:
I had the same problem like you have.
At first you must uninstall Samsung Kies and install these[EDITED LINK]official USB-Driver from Samsung.
Start Odin 1.85 and Run it as Admin if you have Win7. Connect your Ace and check if your device get displayed in Odin.
Then go into the download mode and flash your firmware.
If you can't get into the Download Mode you must buy a USB-Jig from Amazon or wherever.
Click to expand...
Click to collapse
saeed14i said:
If you are able to get your phone in download mode (volume up + volume down + power) then simply follow any guide from this section explaining how to flash multipackage stock firmware. If ur phone is not getting detected in odin, that is also explained in multiple threads here. As long as u can get the phone in download mode, you should be able to fix the problem. Let me know if u still need exact directions
Sent from my GT-S5660 using xda app-developers app
Click to expand...
Click to collapse
Thanks guys, but i can resolve my problem:
i go to the support of my cellphone company (entel pcs chile) and they give me another galaxy ace TOTALLY NEW AND FREE
i'm so luck!
Thanks 4 the answers :victory::victory::victory::laugh::laugh:

lalobad said:
Thanks guys, but i can resolve my problem:
i go to the support of my cellphone company (entel pcs chile) and they give me another galaxy ace TOTALLY NEW AND FREE
i'm so luck!
Thanks 4 the answers :victory::victory::victory::laugh::laugh:
Click to expand...
Click to collapse
Congratulations
I am surprised, a company replacing a phone after it is rooted and flashed with a custom kernel
Amazing
You are truly very lucky

[Q] cannot boot my phone!!

i have just installed twrp on my phone using odin. but now my phone cannot start and it stuck on the samsung s advnace logo. then i re-read the article that instruct how to install taht twrp. then i realized that the person who posted the article did not mention that it was only for GB not for JB user like me.
can anybody help me!!!

mid valley land said:
i have just installed twrp on my phone using odin. but now my phone cannot start and it stuck on the samsung s advnace logo. then i re-read the article that instruct how to install taht twrp. then i realized that the person who posted the article did not mention that it was only for GB not for JB user like me.
can anybody help me!!!
Click to expand...
Click to collapse
When they wrote the thread, no JB for I9070.
If you get into download mode (remove the battery from the phone, put back and press volume down + home + power) you can reinstall JB stock firmware with Odin.
Succes!

mathei said:
When they wrote the thread, no JB for I9070.
If you get into download mode (remove the battery from the phone, put back and press volume down + home + power) you can reinstall JB stock firmware with Odin.
Succes!
Click to expand...
Click to collapse
and how should i do that exacly.. sorry im newbie..there is a lot that i dont understand

mid valley land said:
and how should i do that exacly.. sorry im newbie..there is a lot that i dont understand
Click to expand...
Click to collapse
I do not understand ... If you worked with Odin, you should know how to get into download mode, right?
You need to have the computer and stock firmware in Odin shape (xxxxxxxxxxxx.tar.md5) which to select in PDA in Odin.
Read http://forum.xda-developers.com/showthread.php?t=1985398 and succes!

There are to modes recovery and download. So did you the wrong mode for installing twrp?
Sent from my GT-I9070 using xda app-developers app

okay..i get that..thanks a lot..love u

my galaxy mini 2 doesn't work after chainfire 3d

Hi guys. I was using cyanogenmod 10 on my S6500D. Works good i think. And i can't play wild blood on my phone. I want to try chainfire 3d. After installing drivers for CF3D my phone is not working. Always restarting on ''samsung'' logo. I can't open recovery mod. I can't open download mod (may be i can sometimes i don't know) I tried to install orginal rom for mini 2. Doesn't work. Please help me. Sorry for bad english.

orome2 said:
Hi guys. I was using cyanogenmod 10 on my S6500D. Works good i think. And i can't play wild blood on my phone. I want to try chainfire 3d. After installing drivers for CF3D my phone is not working. Always restarting on ''samsung'' logo. I can't open recovery mod. I can't open download mod (may be i can sometimes i don't know) I tried to install orginal rom for mini 2. Doesn't work. Please help me. Sorry for bad english.
Click to expand...
Click to collapse
You have soft bricked your phone as CF3D drivers didn work as it was supposed to. First turn off your device by long pressing power key, this works many times even if you are in a boot loop(which is what you are experiencing now). Now like always try to enter recovery mode manually by the combination specified for your device (mine is power+home key+vol. up for recovery and power+home+vol. down for download). If you can enter recovery mode, wipe data and cache and if needed dalvik cache as well but it will take more time for your phone to start the first time after dalvik cache is wiped. This will probably fix your problem. And if it doesn then your next choice is flashing stock rom via odin. Pull your battery, insert it back after 10 seconds. Enter download mode manually and you know how to flash stock rom via odin i suppose. You can find many guides out there as well.. Hopes this helps...

haridevil99 said:
You have soft bricked your phone as CF3D drivers didn work as it was supposed to. First turn off your device by long pressing power key, this works many times even if you are in a boot loop(which is what you are experiencing now). Now like always try to enter recovery mode manually by the combination specified for your device (mine is power+home key+vol. up for recovery and power+home+vol. down for download). If you can enter recovery mode, wipe data and cache and if needed dalvik cache as well but it will take more time for your phone to start the first time after dalvik cache is wiped. This will probably fix your problem. And if it doesn then your next choice is flashing stock rom via odin. Pull your battery, insert it back after 10 seconds. Enter download mode manually and you know how to flash stock rom via odin i suppose. You can find many guides out there as well.. Hopes this helps...
Click to expand...
Click to collapse
i can't open recovery mod. and i can't find stock rom for mini 2. When i prees long power buton my phone doesn't turn off. Still restarting. Please help me guys

Dont worry. Pull battery for 10sec and see if you can enter download mode. check this for your stock rom. This will do for now. You can later search for your region or flash a custom rom.
http://www.samsungroms.com/firmware...00-gingerbread-2-3-6-s6500ailk1-italy-tim-rom
Let me know if it does..

didn't work again. Thank you for your helps but still same problem (sorry for bad English ) I can't reach recovery mod and my phone still restartings on samsung logo. Another solution for that problem? Please help me.

Remove the battery....and put it
Now go to recovery mode....and install a rom.....once I also face this problem
Samsung Galaxy Y-Jellyblast

i can't open recovery mod bro. I press all keys but nothing. I can open download mod only. But i can't do anything.

orome2 said:
i can't open recovery mod bro. I press all keys but nothing. I can open download mod only. But i can't do anything.
Click to expand...
Click to collapse
Dude..! Dont you rememeber..? I told you to enter download mode and use odin to flash the stock rom of which i provided the link..

me too
me too

haridevil99 said:
Dude..! Dont you rememeber..? I told you to enter download mode and use odin to flash the stock rom of which i provided the link..
Click to expand...
Click to collapse
i did it. But same problem still. Can i format my phone without recovery mod?

orome2 said:
i did it. But same problem still. Can i format my phone without recovery mod?
Click to expand...
Click to collapse
You flashed stock firmware using odin..? And, well.. you got two ops to access your phone other than using a Rom and that is recovery and download modes.

haridevil99 said:
You flashed stock firmware using odin..? And, well.. you got two ops to access your phone other than using a Rom and that is recovery and download modes.
Click to expand...
Click to collapse
you gave me S6500 italy stock rom. But i have S6500D. I downloaded S6500D stock rom russia from same site. But it didn't worked. I can reach download mod but i can't reach recovery mod. Can you help me?

orome2 said:
you gave me S6500 italy stock rom. But i have S6500D. I downloaded S6500D stock rom russia from same site. But it didn't worked. I can reach download mod but i can't reach recovery mod. Can you help me?
Click to expand...
Click to collapse
Sure.. I can help you. Check this.. It got what you need and it should work this time. Ignore the stuff mentioned at first of the article coz they are talking bout a perfectly working device and we are facing a worst case scenerio. Download the required files. Uninstall kies if you have it installed coz it will probably clash with Odin trying to access your device and report error. So have just the usb drivers installed and remove kies first. Next do as they say. It should be fine. Let me know if it worked.
http://u-smartphone.blogspot.in/2013/04/update-galaxy-mini-2-s6500-bulk2.html?m=1

haridevil99 said:
Sure.. I can help you. Check this.. It got what you need and it should work this time. Ignore the stuff mentioned at first of the article coz they are talking bout a perfectly working device and we are facing a worst case scenerio. Download the required files. Uninstall kies if you have it installed coz it will probably clash with Odin trying to access your device and report error. So have just the usb drivers installed and remove kies first. Next do as they say. It should be fine. Let me know if it worked.
http://u-smartphone.blogspot.in/2013/04/update-galaxy-mini-2-s6500-bulk2.html?m=1
Click to expand...
Click to collapse
now my phone stucks on samsung logo. But not restartings. I think it is good. I can't reach recovery mod still. So close

orome2 said:
now my phone stucks on samsung logo. But not restartings. I think it is good. I can't reach recovery mod still. So close
Click to expand...
Click to collapse
This might get you back your recovery. Flash this cwm.tar.md5 using odin. select the PDA option and select the .tar.md5 file you got now. Check if it restores your recovery and let me know.
http://www.4shared.com/file/MfJmh2bn/clockworkmod-5028tar.html

haridevil99 said:
This might get you back your recovery. Flash this cwm.tar.md5 using odin. select the PDA option and select the .tar.md5 file you got now. Check if it restores your recovery and let me know.
http://www.4shared.com/file/MfJmh2bn/clockworkmod-5028tar.html
Click to expand...
Click to collapse
i think my phone is dead. Cuz i did it. But still can't reach r. mod. I think i must go phone repair center

orome2 said:
i think my phone is dead. Cuz i did it. But still can't reach r. mod. I think i must go phone repair center
Click to expand...
Click to collapse
If you can enter download mode then dont give up. Try for odin flashable Roms and if you take your phone to service centre, dont tell them what really happened coz it will void your warranty. Tell them it happened while flashing the official stock rom update. It might save you from paying em and also losing your warranty..

haridevil99 said:
If you can enter download mode then dont give up. Try for odin flashable Roms and if you take your phone to service centre, dont tell them what really happened coz it will void your warranty. Tell them it happened while flashing the official stock rom update. It might save you from paying em and also losing your warranty..
Click to expand...
Click to collapse
good idea. But i don't know nomore roms. Can i install cyanogen or another rom via odin?

orome2 said:
good idea. But i don't know nomore roms. Can i install cyanogen or another rom via odin?
Click to expand...
Click to collapse
You can but should have odin flashable files. Well if you find any then you can try it. But trying the ones you got already might work as you got the logo now.

haridevil99 said:
You can but should have odin flashable files. Well if you find any then you can try it. But trying the ones you got already might work as you got the logo now.
Click to expand...
Click to collapse
ohh. Whatever. I mut go repair. I trierd a lot of ways but didn't work. I bored. Thank you for your helps.

[Q]What should I do? (Bricked Phone)

Hello, this is my first post, but no one cares. Right?
I have a little story... Today I tried to Upgrade from CM 10.1 to CM 10.2 but I had a little problem. Because I wanted to have a fresh instalation I first tried to flash with ODIN 3.0.4 official 2.3.6. In the middle of instalation... I had a power outage for 5 seconds. Now my problem is:
1. It can't enter Recovery;
2. It can't enter Download Mode;
3. It can't boot System.
When i plug the usb cable, it shows me this message: "Firmware upgrade encountered an issue. Please select recovery mode in kies and try again. ", but that's a little strange because I don't even have Kies installed on PC. This is the only scree I can see.
I don't know how, but somehow I entered Download Mode for 5-10 seconds, but my PC doesn't recognize my phone. After that the phone just shuted down.
I already browse all topics about soft brick, but nothing helped me...
Before take my phone to a service, what are my other choices?

DanuTzCarbon said:
Hello, this is my first post, but no one cares. Right?
I have a little story... Today I tried to Upgrade from CM 10.1 to CM 10.2 but I had a little problem. Because I wanted to have a fresh instalation I first tried to flash with ODIN 3.0.4 official 2.3.6. In the middle of instalation... I had a power outage for 5 seconds. Now my problem is:
1. It can't enter Recovery;
2. It can't enter Download Mode;
3. It can't boot System.
When i plug the usb cable, it shows me this message: "Firmware upgrade encountered an issue. Please select recovery mode in kies and try again. ", but that's a little strange because I don't even have Kies installed on PC. This is the only scree I can see.
I don't know how, but somehow I entered Download Mode for 5-10 seconds, but my PC doesn't recognize my phone. After that the phone just shuted down.
I already browse all topics about soft brick, but nothing helped me...
Before take my phone to a service, what are my other choices?
Click to expand...
Click to collapse
Sorry my friend only samsung can help you!!!
Sent from my GT-S5570 using xda premium

uninstall your kies. then install samsung usb driver.
then odin your phone.

dzeig said:
uninstall your kies. then install samsung usb driver.
then odin your phone.
Click to expand...
Click to collapse
I can't enter Download Mode and I haven't KIES installed.

Since you had a power outbreak during Odin flashing, it might not fully flash the bootloader (boot.img file), or the fat.bin file, both of them are essential for proper phone operation.
Install Kies, and try the recovery mode in it, see if it works.
Also, try to charge your battery, maybe this will help somehow.
If nothing works, service is your only option, as you cannot manually repair a partially flashed boot.img or fat.bin.

boot.img is not bootloader,

Boot.img is kernel
Tapnięte z mojego mini 2

MrMateczko said:
Since you had a power outbreak during Odin flashing, it might not fully flash the bootloader (boot.img file), or the fat.bin file, both of them are essential for proper phone operation.
Install Kies, and try the recovery mode in it, see if it works.
Also, try to charge your battery, maybe this will help somehow.
If nothing works, service is your only option, as you cannot manually repair a partially flashed boot.img or fat.bin.
Click to expand...
Click to collapse
Well, I installed Kies.
I can't use "Emergency firmware recovery" because my PC doesn't recognize my phone.
I can't use "Firmware Upgrade and Initialisation". When I enter the details about my phone I get "'GT-S6500D' does not support initializing.".
I don't think I have other option in Kies...

Another problem:
My phone is absolutely unresponsive.
Maybe because of battery.
I can't charge it. I have a friend with S6500D...
I will try with he's battery.
Maybe I could try some tricks to enter in Download Mode. (God, please help me!!)

Instal drivers and go to download mode !
Tapnięte z mojego mini 2

hheelloo said:
Instal drivers and go to download mode !
Tapnięte z mojego mini 2
Click to expand...
Click to collapse
I have drivers. Isn't that the problem. And I said I can't enter Download Mode.

Sorry but your phone is hard bricked so you can't fix your phone yourself.You have to send it to samsung to fix it.The hard brick was caused by failed bootloader update.But if you have power surges i recommend you to flash your phone from a laptop.

darkshadow1997 said:
Sorry but your phone is hard bricked so you can't fix your phone yourself.You have to send it to samsung to fix it.The hard brick was caused by failed bootloader update.But if you have power surges i recommend you to flash your phone from a laptop or flash stock rom with bootloader removed link:http://forum.xda-developers.com/showthread.php?t=1551586
Click to expand...
Click to collapse
Thanks for the advice.

Please ignore the link to stock firmware without bootloader because i did not know your phone was galaxy mini 2 because sometimes mini 2 questions are posted in mini 1.And i have both mini and mini 2.

If boot.img is not the bootloader (it's the kernel, I'm sorry for telling you wrong before), then why the Download Mode does not work?

darkshadow1997 said:
Please ignore the link to stock firmware without bootloader because i did not know your phone was galaxy mini 2 because sometimes mini 2 questions are posted in mini 1.And i have both mini and mini 2.
Click to expand...
Click to collapse
It doesn't matter... I saw it was for Mini... Anyway download mode still not working so don't worry.
Thanks for the idea of stock firmwares without bootloader... maybe i could edit stock firmwares for my phone.

You can edit stock rom without the risk of hardbrick.just upack your stock rom then delete bootloader then download a software to create tar do not use tar editor because just deleting the bootloader doesn't mean odin will load it maybe because of md5.So did you send your phone to samsung.

darkshadow1997 said:
You can edit stock rom without the risk of hardbrick.just upack your stock rom then delete bootloader then download a software to create tar do not use tar editor because just deleting the bootloader doesn't mean odin will load it maybe because of md5.So did you send your phone to samsung.
Click to expand...
Click to collapse
Well... my brother know a guy who know another guy. This guy have a service or something like that. I sent the phone to him. Maybe he could do something. If not... I will try to find the famous Usb Jig for my model of mini. I found for GT-S5570 but still searching for GT-S6500D

Fixed
Well... I sent my phone to a service but there they could only fix download mode. LOL. They tried to install firmware update, but the phone was stuck in bootloop. From there, I fixed by myself.
I will ask them how did they fix it.