Related
chekc this
http://www.bluetrade.eu/index.php?page=product&id=8720
i order it yerterday
i'll make some report as soon as possible
i order this one too (just to try to use x7500 without case)
http://www.caselogic.com/koskin_pda_slip_case/product_detail/index.cfm?modelid=57047
it seems to fit, i will see and i will report
regards
axle7517 said:
chekc this
http://www.bluetrade.eu/index.php?page=product&id=8720
i order it yerterday
i'll make some report as soon as possible
i order this one too (just to try to use x7500 without case)
http://www.caselogic.com/koskin_pda_slip_case/product_detail/index.cfm?modelid=57047
it seems to fit, i will see and i will report
regards
Click to expand...
Click to collapse
Thanks for letting us all know.
My only concerns are that the http://www.bluetrade.eu/index.php?page=product&id=8720 case found here will do exactly as the free case does, scratch the inside of the screen, and also ensure that all the letters wear off as there is no protection from the keyboard.
the great diffence is that
you can see the external screen when closed
and !!!
there is a belt clip !!!
The one from Case Logic seems promising but I don't think it will fit:
X7500 dimensions (mm): 133,5 x 98 x 16 (or x 20 with keyboard on)
Case interior dimensions: 138,2 x 82,6 x 25,4
Please report when you receive it and post pictures if you can.
Regards,
S.
axle7517 said:
the great diffence is that
you can see the external screen when closed
and !!!
there is a belt clip !!!
Click to expand...
Click to collapse
Let us know once you get the case with the belt clip. I want one like that.
This one will work, and has a velcro belt loop:
http://cgi.ebay.com/OEM-HP-IPAQ-H63...ryZ15034QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
I like the looks of the bluetrade.eu one. Cant wait for a mini review. How exactly will the x7500 fit on the belt for daily use.... Will it make you limp?
Looks to be about $49 USD for it after all shipping and paypal tax. The shipping to the US is more than the case costs
Looks to be about the same design as the Piel Frama and about half the price for people in the US. We will see what the quality is when someone gets one.
axle7517 said:
chekc this
http://www.bluetrade.eu/index.php?page=product&id=8720
i order it yerterday
Click to expand...
Click to collapse
Thanks looks good indeed.. I did order one asw ell yesterday evening, let's see, they states it will take at least 10 days to deliver...
Hi,
I like the bluetrade one BUT ... I don't think the display will work proparly because the keyboard will a little bit separated from the Athena so the magnet will not recognized the keyboard is there (as it happens with the case it comes with the Athena). This is due to the smalls grips to hold the Athena.
4 weeks ago, I found this camera bag that fits to my Athena.
The brand name is TUCANO (www.tucano.it).
When I'm wearing a suit I use to carry the Athena in my jacket pocket without any kind of case.
But the rest of the time I use to carry a small backpack. For that reason, I was looking for a case which it could be complitely closed.
As I said, the one I'm using is from Tucano and is a camerga bad. There are several sizes. My one is 'Medium'.
I hope this would help anyone.
I will add some pictures so I'm sure you will have a better idea.
Best regards,
Alberto
axle7517 said:
chekc this
http://www.bluetrade.eu/index.php?page=product&id=8720
i order it yerterday
i'll make some report as soon as possible
i order this one too (just to try to use x7500 without case)
http://www.caselogic.com/koskin_pda_slip_case/product_detail/index.cfm?modelid=57047
it seems to fit, i will see and i will report
regards
Click to expand...
Click to collapse
http://www.caselogic.com/koskin_pda_...?modelid=57047
i received it yesterday
... don't fit or nearly
X7500 gets in with dificulty but it gets
X7500 dimensions (mm): 133,5 x 98 x 16 (or x 20 with keyboard on)
Case interior dimensions: 138,2 x 82,6 x 25,4
there 's 1,5 cm left
so it's get in but it is too stretch and it is hard to get in and get then out
I'm trying to stretch it with something biger but after 24 hours still the same
it depends on the using of each one but for me for a constant use every day it s not usefull at hall
but if the "forced" stretch work i will tell you
for the bluetrade case still not received
i found this one too
http://www.hama.fr/portal/articleId*58649/action*2563#4
but no information about the interior size
if some one find tell us
regard
i found this one
http://www.krusell.se/productUni.php?productID=2527&category=50&x=10&y=12
i don't know if it good
i try to order
axle7517 said:
i found this one
http://www.krusell.se/productUni.php?productID=2527&category=50&x=10&y=12
i don't know if it good
i try to order
Click to expand...
Click to collapse
I also saw this one today.
http://www.proporta.com/F02/PPF02P05.php?t_id=759&t_mode=des
It's under the HTC X7500 category on their website so I'm hoping it fits. Aesthetically, it does not really tick any of my boxes but I've actually ordered one to try out until I get the case I really like.
can I suggest you dont carry your credit card in there as in the photo.
the magnets will do magical and mystical things.
CPA said:
can I suggest you dont carry your credit card in there as in the photo.
the magnets will do magical and mystical things.
Click to expand...
Click to collapse
Thanks for the reminder, LOL!
No cards in there at all. Just the Ameo.
case
Ii think this is even better as it protects the screen edges from the keyboard!
http://www.pdair.com/catalog/product_info.php?cPath=10900000_11000093_11000094&products_id=5551
adamelphick said:
Ii think this is even better as it protects the screen edges from the keyboard!
http://www.pdair.com/catalog/product_info.php?cPath=10900000_11000093_11000094&products_id=5551
Click to expand...
Click to collapse
It does look better but personally, I do need a belt-clip/attachment option for carrying it about.
belt clip
I says it comes with one!
you can also use the aircompact casing for a nintendo DS. it fits perfectly with side pockets and extra flap in the middle to protect your lcd and the keyboard from rubbing against each other
adamelphick said:
Ii think this is even better as it protects the screen edges from the keyboard!
http://www.pdair.com/catalog/product_info.php?cPath=10900000_11000093_11000094&products_id=5551
Click to expand...
Click to collapse
And protects the keyboard from any attempt to type on it.
It's not a BAD case; some aspects are well thought out, but it has NO belt clip option, and the keyboard is covered with a plastic sheet that warps and isn't quite flexible enough - even when new, before it had warped so much the ZXC row of keys was utterly unusable, pressing E or R would often send a half-finished reply to an SMS as it activated the soft key as well.
After a month of ownership the plastic was so bad, I traced the edges of the keyboard and cut a section out, leaving only the top row of keys covered and an edge around to hold the keyboard down.
Oh, didnt realise it had a crappy plastic cover over the keyboard! I assumed it had a magnet on the back like the original case... damn.
Im looking at either getting the nice leather case, the official HTC one "Diamond Pouch PO S390" (seen in this thread here... http://forum.xda-developers.com/showthread.php?t=403691) or this http://cgi.ebay.co.uk/HTC-Touch-Dia...photoQQcmdZViewItemQQ_trksidZp1713.m153.l1262
Anyone got a crystal case for their Touch Diamond? If so whats it like?
Im looking to protect my Diamond as I know how easy to scratch and mark they are (its doing ok at the moment but id like to keep it protected and looking like new)
Thanks, any feedback would be appreciated
I got one yesterday ( for $15 CDN ==" since i didn't want to wait for shipping)
from what i've seen so far
Seems like a great case, it is a tight fit for the diamond, so there are some worries with regards to upgrading the battery in the future....
But aside from that, it does its job of protecting my diamond and the change in dimensiosn is barely noticeable to me.
Moderators Could you move this to Diamond Accessories please, sorry, thought I had posted it in there, but hadnt.
Thanks for the feedback, sounds positive, I want to get a leather case, but at the same time its nice if i can just use it rather than get it out of the leather case to use it.
Mmm, food for thought!
yse mods please move the thread ^^"
i was contemplating the leather case as well before...
the benefit to the hard case is that its as it doesn't make it more difficult to access the phone and you dont need to take it out of the case to do anything
the only pet peeve i have with my case is that the power button on the top left is now a bit harder to press due to the case
just my 2 cents
Most of the crystal cases i have come across are dust magnets...so that puts me off them. Ive ordered the pouch today from Expansys...the official one although i have to wait 3 days before they come into stock..
Had one of these plastic cases on a samsung phone - the case cracked after a few days Lets hope these are different
One reason why im staying off silicon/crystal cases is so that I could enjoy the flushed screen.
Strange.. U guys don't seem to find it a luxury to have a flushed screen. I love it as I don't need to finger-wrestle in order to tap the 'X' button...
MasK, thats a very good point! I know what you mean there, very frustrating.
Mmm, think im just gonna opt for the Leather Case. Think I would just get frustrated with the Crystal Case.
Thanks for your feedback and comments guys.
Slightly off topic...
But do you think somebody (HTC or after-market company) will produce a soft touch / matt finish rear cover for the Diamond? I mean, its an easily replaceable, small piece of plastic and would protect (or hide) fingerprints and make it less scratchy if its soft?
Just a though... if any external companies looking it at, I'll pay £2.99 for a rip off soft touch back cover on eBay from Hong Kong
DG
New Horizontal Leather Case for the HTC Advantage X7510, X7501, & X7500 by NUTSHELL
New Horizontal Leather Case for the HTC Advantage X7510, X7501, & X7500 by NUTSHELL
Nutshell: http://tuff-as-nuts.com/index.asp?PageAction=COMPANY
I had contacted Nutshell regarding a customized Horizontal Case (black) that will fully enclosed the HTC Advantage X7510 with the leather pouch included about 2 months ago. I was able to get intouch with Ian Miller and was basically received with open arms. I was asked to submit my design and the dimensions.
The dimensions are: 5.8 inches (lenght) x 4.4 inches (height) x 1.30 inches (depth).
It is closed by a velcro flap that fully covers the top of the case preventing any accidental exposure to the elements.
The back of the case has the D ring and metal belt clip lined with leather. But in all honesty, I think it would have looked better if the metal clip was left without the leather strip cover. It would looked nicer if the silver finish of the metal clip was shown rather than hidden.
But all in all, the case is very well made. The stitches and cuttings were done right and very clean. The case will protect the X7510 and it's leather pouch while having the ability to clip it to your belt or trousers on the go.
I paid $95.00 for the case, but it may become cheaper if it will be popular.
I have attached pictures for you guys and gals to check. I believe NUTSHELL will mass produce them if the demand is high enough.
THANK YOU NUTSHELL (Ian) for a case well done.
Feel free to ask questions...
Added Pictures...
Added pictures...
nice find as i just bought myself another case but this one i like a lot better although the case i bought was only $49
Thanks Christian. Glad to help.
As this was a prototype, we have not yet given it a part number...but we shall and then post it to our catalog.
With your blessing I"ll use some of the images you have posted here.
Obviously we shall try to price it right, but as the first few will, like this one, be hand cut, pricing will have to stay the same in the short term.
However, if there is an interest (and it has to be considerable to make it worthwhile, we'll likely look at getting the assets that will enable us to run off some volume).
That said, it really is over to the community to determine if this product gets wings...or....?
A suggestion: Maybe someone could open a book to register interest (bulk purchases work best and enable us to finetune our pricing). As I am not a regular on this forum, maybe that someone could run point for me on this.
So it really is over to you guys.
We'll do what we can.
All the best.
nutshell said:
With your blessing I"ll use some of the images you have posted here.
Click to expand...
Click to collapse
Yes of course. Feel free to use it.
cktlcmd said:
Yes of course. Feel free to use it.
Click to expand...
Click to collapse
Nutshell,
Very well taken pictures indeed. Looks like real good quality pouch. Is it made to custom sizes? I normally carry my device without the keyboard, so it is quite a bit thinner and smaller. What would be the total cost shipped to Australia?
Also, a question for cktlcmd. Currently, I have a soft pouch, and taking it out is easy, as I can squeeze the soft pouch to push out the device. With a hard leather one, I imagine it is not easy to squeeze the bottom to force the device upward, so one would have to lift it up. Would that be easy? Or would the device be too slippery for that, even that I carry it naked?
eaglesteve said:
Also, a question for cktlcmd. Currently, I have a soft pouch, and taking it out is easy, as I can squeeze the soft pouch to push out the device. With a hard leather one, I imagine it is not easy to squeeze the bottom to force the device upward, so one would have to lift it up. Would that be easy? Or would the device be too slippery for that, even that I carry it naked?
Click to expand...
Click to collapse
In my case, since it also houses the X7510 with keyboard and the leather case, it is not slippery at all. It is easy to grab it on top and just pull it out. The case itself is not made of really hard leather plus it is lined inside with felt like skin to protect the device from being scratched by the case itself. The technique I use to get it out fast is to pull on top and press each sides of the case because that is where I notice the greatest hold on the device occurs.
In your case, since you will probably want Nutshell to adjust the measurements to accommodate just the device, it won't even be a problem because of the soft felt lining, it will just slid easily in and out.
It trully is a nice case. I wish they had designed it like this from the start.
nutshell said:
Thanks Christian. Glad to help.
As this was a prototype, we have not yet given it a part number...but we shall and then post it to our catalog.
With your blessing I"ll use some of the images you have posted here.
Obviously we shall try to price it right, but as the first few will, like this one, be hand cut, pricing will have to stay the same in the short term.
However, if there is an interest (and it has to be considerable to make it worthwhile, we'll likely look at getting the assets that will enable us to run off some volume).
That said, it really is over to the community to determine if this product gets wings...or....?
A suggestion: Maybe someone could open a book to register interest (bulk purchases work best and enable us to finetune our pricing). As I am not a regular on this forum, maybe that someone could run point for me on this.
So it really is over to you guys.
We'll do what we can.
All the best.
Click to expand...
Click to collapse
I am very interested!
Another case?
eaglesteve said:
Very well taken pictures indeed. Looks like real good quality pouch. Is it made to custom sizes? I normally carry my device without the keyboard, so it is quite a bit thinner and smaller. What would be the total cost shipped to Australia?
Click to expand...
Click to collapse
I have listed the product for the x7510 in our catalog:
Horizontal belt case for HTC x7510
Sure, we can make you a slimmer horizontal case.
Costs would be the same.
We would need the dimensions without the keyboard.
Shipping to Oz from NZ depends on how quickly you would want one.
Contact me through the website.
tuff-as-nuts.com
Will the 7510 case also fit the 7500/7501? My understanding is that they are the same dimensions... Anyone know offhand?
Thanks for the topic
Have anyone ever seen a vertical case for X7500 for the use without the external keyboard?
This is a bit off-topic, but personally I find the HW keyboard to be the ultimate screen-protector and would not dream of leaving home without it (even though I use my Advantage in portrait-mode 95% of the time).
On-topic again I would guess that one could use any case made for the 7510 WITH keyboard as this unit is just a bit thinner than the original 7500/7501.
trondkk said:
This is a bit off-topic, but personally I find the HW keyboard to be the ultimate screen-protector and would not dream of leaving home without it (even though I use my Advantage in portrait-mode 95% of the time).
On-topic again I would guess that one could use any case made for the 7510 WITH keyboard as this unit is just a bit thinner than the original 7500/7501.
Click to expand...
Click to collapse
No. The keyboard is the most effective way to ruin your device with scratches. Take it away if you want your unit to look new all the time. If you really must have the keybaord, put a piece of cloth between the unit and the keyboard to prevent them from rubbing against each other.
We have different experiences then eaglesteve. I have used my HTC X7500 for well more than a year with the original book cover (with the 3 clips) and have only miniscule scratches on the keyboard itself, not on the main unit.
I now also have the Piel Frama Case (since a month ago) and with this case it would be even more difficult to scratch the unit with the keyboard.
And even if this was NOT the case I would much rather have endured a scratch or two than having my screen broken due to a fall or pointed item pressing against it (even in the pouch). The solid steel of the keyboard over the screen gives me an ease of mind I will not trade for the sake of a marginally smaller "package" to carry around.
And now, with the vertical Nutshell-Pouch I hope to enjoy my Advantage X7500 for a long time since no better device (for my needs) seems forthcoming from HTC or any other manufacturer.
I agree with eaglesteve - I've had more scratches/rub-marks from the keyboard than from anything else. Keeping the keyboard as a screen protector is a non-issue, just make sure the screen faces towards your body when its in a pouch, or in a pocket. On the weekends I leave my Nutshell and the keyboard at home, and just face the screen towards my leg in my pocket.
techntrek said:
I agree with eaglesteve - I've had more scratches/rub-marks from the keyboard than from anything else. Keeping the keyboard as a screen protector is a non-issue, just make sure the screen faces towards your body when its in a pouch, or in a pocket. On the weekends I leave my Nutshell and the keyboard at home, and just face the screen towards my leg in my pocket.
Click to expand...
Click to collapse
Here you can find a scratch proof leather case. Also cheap and black (more elegant) colour.
http://cgi.ebay.co.uk/ws/eBayISAPI....m=370063633176&ssPageName=STRK:MEWN:IT&ih=024
finally after many, many tries, a case that really works. well made. beautiful. sturdy. i got the mag lock. very nice, highly recommended.
Well... I just order mine from Spain... 10/14 days to wait... will see. I'm risk 99.95 USD on it.
I just receive the confirmation email... good signal, my VISA still works.
Received last week.
Well finished... and the quality is according the price.
The X7500 fits perfectly even with it's case. Since I'm not placing the X7500 in the case with the original one there is place for my backup battery.
Great job Nutshell
This case is nice! But I always wanted a case that would allow me to hold my X7500 without the keyboard,so it would look like a slim and supersized-screen IPOD! That I can put into my pocket easily..like an IPOD.
So, I have a question for Nutshell: can you build us one? But I can someone here volunteer to provide some dimentions for an X7500 or X7501, coz I really sucked at the whole designing and measurement thing, afraid I would screw up the whole thing.
Hi all,
I have recently switched to the Streak from owning all models of the iphone, and have not looked back. Such an awesome device, and android is great. Anyways, I had owned a case for my 3gs and Iphone 4 called the Mogotalk xd. It is a bluetooth/case/charger that keeps an extremely thin and very good bluetooth on the back of your phone. I have missed it very much, especially since the streak is huge and could really benefit from one of these...The product is very smart, and very thin...but this isn't a review, so you can check it out their site, which I can't link yet...just google or youtube it...
I contact ID8 support to ask if they would be making these cases for other devices, and they replied back that they would not. So, I decided to mod mine for my streak, and post it here in case anyone else wants to do the same. It came out very well I think, and was very easy...extremely useful...
I started by removing the felt lining (just peeled out), then, after messing around a bit, decided to just take an exacto knife to the rubber for the sides of the iphone. I cut right along the back of the case, so as to have a close fit. Pics attached ( I also cannot link pictures yet :-C)
I have 2 battery covers, so I then attached it with double sided tape (temporary, as I am looking for some way incorporate a kickstand next). I lined up the top of the case with the top of the battery cover. It still slides on fine. If someone wanted to, they could probably dremel the top of the case to fit perfectly on the battery cover, as the camera hole unfortunately is horizontal...and there are no electronics on the top half (bottom has charging port) The only thing you really lose is a few millimeters of thickness...but this thing is thin (still fits tightly in the car dock from dell) And now I have bluetooth that charges on my phone and is always with me. Really easy to do, and definitely worth it if you like talking on your phone, as this can be difficult with the streak. Let me know if you have any questions...you can pick this up on amazon or other sites for around 40-45 dollars..its worth it..
One thing to be careful of there is the battery compartment door. There's a power switch inside the Streak that's activated by a pin on the door and if the door moves your Streak will power down. This is a known problem with nothing on the door so I don't know how yours will behave with the extra weight/bulk hanging off it. I know good comfortable earpieces are hard to find so maybe you could incorporate the BT holder into another case instead of attaching it directly to the streak?
I thought about that, and it would be very easy for someone who wanted a case...however, I do not...The Case/bluetooth is extremely light, and for some reason, the battery cover now fits much more tightly in place..its not going anywhere...It would be really easy to just cut out out the back of a case, especially a silicone one, to fit...or to cut the top half as I said before and fit it into a hard case...
Hello,
When I buy a Wallet Case for my Nexus6, do I have to consider buying a wallet with an opening on the Wireless Charging point (The M Symbol) ? Like this one.
Will the Wireless Charging work if there is no opening ?
This one doesn't have that opening.
Please suggest.
Thanks.
The center of the coil is about 1/3 of the way up from the bottom, so in a way it is exactly opposite the dimple.
I use a Ringke SLIM which is solid on the back and have no issues with Qi charging, other than the need to skew the phone bit high on the charger to center up the coils.
If it'll charge through a Ballistic Tough Jacket Maxx (and it does...), then you have nothing to worry about.
Hurry up and HIDE the ugly M logo.
Hello,
I need a Nexus6 Wallet with cut-offs for camera, power & volume buttons, 2 speakers, charger & audio ports, Moto Logo (not necessary). Do you know any Wallets that meets these requirements ? For most wallets, the cut-off for power & volume buttons won't be there. There will be buttons instead.
What about the Magnet Flap like this ?
Will it be dangerous for the data ?
Thanks.
aniyan.rajan6 said:
Hello,
I need a Nexus6 Wallet with cut-offs for camera, power & volume buttons, 2 speakers, charger & audio ports, Moto Logo (not necessary). Do you know any Wallets that meets these requirements ? For most wallets, the cut-off for power & volume buttons won't be there. There will be buttons instead.
What about the Magnet Flap like this ?
Will it be dangerous for the data ?
Thanks.
Click to expand...
Click to collapse
It shouldn't be able to harm your data in any way. The storage isn't magnetic these days. It might harm any credit cards you put in it though if you put them in the wrong way. Spigen even includes a note about that telling you which way the magnetic strip should go.
Looks like a good wallet case to be honest. The first one I've seen with a magnetic closure as well as cutouts for both speakers. Kind of want one myself now.
Obscure Reference said:
It shouldn't be able to harm your data in any way. The storage isn't magnetic these days. It might harm any credit cards you put in it though if you put them in the wrong way. Spigen even includes a note about that telling you which way the magnetic strip should go.
Looks like a good wallet case to be honest. The first one I've seen with a magnetic closure as well as cutouts for both speakers. Kind of want one myself now.
Click to expand...
Click to collapse
Good to hear that it helped you. I'm also looking for a similar one, but with cutout for the Power and Volume buttons in additional. I'm not going to store my cards in the phone wallet anyway.
Hello,
I have a question regarding this kind of Wallet. I am very doubtful, whether the Power & Volume Buttons on the case will damage the actual Power & Volume Buttons on the phone. I feel that it would be safer if I could press those buttons on the phone with my finger, as the buttons on the Wallet Case may be in a wrong position. What is your opinion about this ? Anyone having such problems ?
Thanks.
aniyan.rajan6 said:
Hello,
I have a question regarding this kind of Wallet. I am very doubtful, whether the Power & Volume Buttons on the case will damage the actual Power & Volume Buttons on the phone. I feel that it would be safer if I could press those buttons on the phone with my finger, as the buttons on the Wallet Case may be in a wrong position. What is your opinion about this ? Anyone having such problems ?
Thanks.
Click to expand...
Click to collapse
Please look through the accessories forum, here:
http://forum.xda-developers.com/nexus-6/accessories
aniyan.rajan6 said:
Hello,
I have a question regarding this kind of Wallet. I am very doubtful, whether the Power & Volume Buttons on the case will damage the actual Power & Volume Buttons on the phone. I feel that it would be safer if I could press those buttons on the phone with my finger, as the buttons on the Wallet Case may be in a wrong position. What is your opinion about this ? Anyone having such problems ?
Thanks.
Click to expand...
Click to collapse
I've been using this case for 2 months now, and I'm not entirely happy with it.
The protection is excellent, also the buttons are perfectly aligned so no risk there. It's just easy to press the wrong one.
The main problem is that this case is really, REALLY bulky and heavy (keep in mind that I'm not new to phablets, I've been using them exclusively for 3 years now), because of the flat back. Also, the leather is wearing out quite a lot at the corners.
veesix said:
I've been using this case for 2 months now, and I'm not entirely happy with it.
The protection is excellent, also the buttons are perfectly aligned so no risk there. It's just easy to press the wrong one.
The main problem is that this case is really, REALLY bulky and heavy (keep in mind that I'm not new to phablets, I've been using them exclusively for 3 years now), because of the flat back. Also, the leather is wearing out quite a lot at the corners.
Click to expand...
Click to collapse
Thanks bari for the info. So which one do you suggest ?
aniyan.rajan6 said:
Thanks bari for the info. So which one do you suggest ?
Click to expand...
Click to collapse
I'm not sure, actually, haven't searched yet for a replacement. I'd suggest to look for a wallet case that follows the curved back of the phone.
veesix said:
I'm not sure, actually, haven't searched yet for a replacement. I'd suggest look for a wallet case that follows the curved back of the phone.
Click to expand...
Click to collapse
You are right. But I think that can be only found in a Back Cover Protector (Bumper). I think all the wallets that I have seen are flat at the back side.
aniyan.rajan6 said:
You are right. But I think that can be only found in a Back Cover Protector (Bumper). I think all the wallets that I have seen are flat at the back side.
Click to expand...
Click to collapse
That stilgut book case you posted looks fine and follows the shape of the phone. Sure, it's quite expensive.
veesix said:
That stilgut book case you posted looks fine and follows the shape of the phone. Sure, it's quite expensive.
Click to expand...
Click to collapse
Yes , I remember it is curvy at the back side. But too much expensive in my place (India). It is around 3 times the price of that Spigen Wallet S. It might be good quality, but I can buy a phone for that price Also another disadvantage with Stilgut is that it doesn't cover (protection) the top and bottom at all. No magnetic closure etc.
aniyan.rajan6 said:
Yes , I remember it is curvy at the back side. But too much expensive in my place (India). It is around 3 times the price of that Spigen Wallet S. It might be good quality, but I can buy a phone for that price Also another disadvantage with Stilgut is that it doesn't cover (protection) the top and bottom at all. No magnetic closure etc.
Click to expand...
Click to collapse
Well, as I said, the protection is excellent with the Spiegen. Some pictures, so you can judge by yourself:
veesix said:
Well, as I said, the protection is excellent with the Spiegen. Some pictures, so you can judge by yourself:
Click to expand...
Click to collapse
Yes I can see the leather worn out at the corners. It also seems bulky. Have you tried Qi Wireless charging with this wallet ?
Thanks.
aniyan.rajan6 said:
Yes I can see the leather worn out at the corners. It also seems bulky. Have you tried Qi Wireless charging with this wallet ?
Thanks.
Click to expand...
Click to collapse
You're welcome
I don't have a wireless charger, so no, I haven't tried.
veesix,
This one has a curvy back, with cutouts for all ports. But the top and bottom side of the phone are still open. Actually, there is no perfect wallet or case
aniyan.rajan6 said:
veesix,
This one has a curvy back, with cutouts for all ports. But the top and bottom side of the phone are still open. Actually, there is no perfect wallet or case
Click to expand...
Click to collapse
No, there's no such thing as a perfect case
I wouldn't mind if the top and bottom of the phone are less protected. Most important thing is the screen, and I don't want to use a screen protector.