Related
Please don't unnecessarily kill any more chickens.
Have you tried Android SDK usb drivers? Someone else on the forum said it works.
Thank you for the reply. But it didn't work. Said can't find "USB Gadget"
hi
i had same problem,i installed samsung pc studio package and managed to flash with odin without any problem
following tutorial in the sdk kit, I got "adp" to recognice my phone from a command prompt in USB debug mode. But when I connect in downloading mode, I get this "Gadget Serial" driver issue. Gadget Serial is not one of the drivers in any of the USB driver packages I downloaded. Anyone know where I can get this?
any answers?
i got the same issue and my phone stuck on the samsung screen restarting over and over
I have posted latest x64 drivers from samsung here on this forum. You can try to use them.
Sent from my GT-I9000 using XDA App
Also restart windows with enforce driver signing disabled. Try other usb ports.
Sent from my GT-I9000 using XDA App
Please please can someone help i was using the new 4.01 ics on samsung galaxy s. Now i cannot conect to pc. I Get an error message all the time saying Usb malfunctioned and i cant use odin to revert back or anything. I have looked everywhere tried reinstalling drivers ect but no joy
I know a while has gone by but just in case someone else stumbles on this thread with the same problem or in case you're still looking for an answer try dialing *#7284# which takes you to the PhoneUtil. Under USB section click on MODEM and then click on USB. Give it a try, it should work
there is a direct download for the nexus drivers found here : http://androiddrivers.net/samsung-android-drivers/download-nexus-s-drivers/ , also suggested in another similar post is to clean the usb port of your phone with alcohol and a fine brush(but remove battery if doing so)
Hi, i'm noob in Galaxy Flashing so this is my problem:
I have a Samsung Galaxy S GT-I9000 blocked from italian carrier.
Few times ago i tried to enable 3-buttons download/recovery mode installing Aries_P-SBL.tar.md5 with Odin. The installation finished successfully but the download/recovery mode still didn't work.
After some reboots (where the phone worked right), now the phone stucks in the boot screen (the one with Galaxy S GT-I9000 SAMSUNG).
With the JIG i can enter download mode but my computer can't detect the phone (Windows feels my USB connection but Odin does not detect it).
If i connect the phone to the computer in normal mode (not in download mode, so with stuck screen), Kies can detect the phone but says that it can't talk with phone in this way(like if it was in USB Debug mode).
I Hope someone can help me
Restart your computer>>>Go to task manager and close all Kies applications (I usually have 2 Kies running from startup)>>>Start Odin and select all the files>>>Put your phone into download mode and connect>>>It should be detected now.
If it is still not detected, close odin, disconnect phone. Start Kies go to tools and install drivers. Once this is complete. Close Kies and start from the top of this post...restart...
Solution Is HEIMDALL.....
Here Comes your solution:
You can easily back your phone with Heimdall.
It's a flashtool which is more complicated than ODIN.
If interesting,simply PM me and we will do it.
I'm Here...
Well,first go to here:
http://forum.xda-developers.com/showthread.php?t=755265
Second: Download 7-zip PC software & extract your official md5 firmware to obtain several other files.
Third:Search the web for a Heimdall How-To(if you didn't find,I'll provide You links)
Last:You'll flash the firmware via Heimdall & again your peace of mind will be back.
Try to reflash your phone normaly with another Rom, it should work
peter_dizai said:
Here Comes your solution:
You can easily back your phone with Heimdall.
It's a flashtool which is more complicated than ODIN.
If interesting,simply PM me and we will do it.
Click to expand...
Click to collapse
Sorry, your advice didn't work, Odin still doesn't detect the phone
Try to change the USB port and install ONLY the phone driver -if you don't find you can contact me.
Inviato dal mio GT-I9000 usando Tapatalk
I don't understand, your download mode works?
Sent from my Galaxy S with ICS 4.0.4 (Italy)
he said download mode works but odin cant detect the phone .
Try reinstalling the samsung usb drivers and/or try from another pc and see if it shows the same thing (meaning nothing) .
Hi,
sorry but i tried all the ways, Odin and Heimdall.
I tried Odin on Windows and Heimdall on MacOSX but always they say
"Failed to detect compatible download-mode device."
I'm sure that phone is in download mode
May i install drivers on OSX with Heimdall?
I have not original samsung USB cable, but i think this is not a problem
Rooted my GT-I9000, and now it has crashed!
First off all my Galaxy I9000 was trying to software update via Kies, and it failed. The it would not start, but i managde to root it with a stock "VOD" rom.. But after a while i wantet to root it back to "Nordic Version"... But i could not do this, because the 3 button combo dont work on my Galaxy I9000 anymore.. :/ So there for i baought a USB JTAG, that puts it into download mode. So far, So good But when it is finished rooting, it fails to mount/unmount a bunch of stuff.. I have a picture of the screen, so that you guys can se what the problem is. I have tryed to root it with the same version that worked before, but it dont work. I have also tryed with som pit files, and so on... I give up, i need help with my Samsung Galaxy S - GT-i9000. Please help me out with this..
Getting Hopeless...?
1)For you to become sure,my Galaxy S Aka I9000 was exactly the same as yours and right now there is nothing wrong with that of course after flashing by HEIMDALL.
2)Remember,if your are going to do anything,Your first and your last key,is your HOPE so be so hopeful and let's start to get over this.
3)Download I9000 USB driver from here and simply install it on WINDOWS OS.
http://hotfile.com/dl/48893334/93383a1/I9000_USB_driver.rar.html
4)Before Using Heimdall, Enter it's folder and you'll see another sub folder called driver and you'll see just ONE executable program,run it and follow these instructions:
(I'll Shortly Provide You A How-to)
5)Enter Heimdall and follow these instructions:
(I'll Shortly Provide You A How-to)
6)Flash firmware
7)Enjoy
8)Press my THX Button.
---------- Post added at 01:15 AM ---------- Previous post was at 01:07 AM ----------
Ghoststavanger said:
First off all my Galaxy I9000 was trying to software update via Kies, and it failed. The it would not start, but i managde to root it with a stock "VOD" rom.. But after a while i wantet to root it back to "Nordic Version"... But i could not do this, because the 3 button combo dont work on my Galaxy I9000 anymore.. :/ So there for i baought a USB JTAG, that puts it into download mode. So far, So good But when it is finished rooting, it fails to mount/unmount a bunch of stuff.. I have a picture of the screen, so that you guys can se what the problem is. I have tryed to root it with the same version that worked before, but it dont work. I have also tryed with som pit files, and so on... I give up, i need help with my Samsung Galaxy S - GT-i9000. Please help me out with this..
Click to expand...
Click to collapse
Ok,Right now I'm here and you are so damn lucky.
1-Simply put your phone into download mode with your cable.
2-Change your cable with an standard Samsung cable.
3-Download a stock firmware which contains 3 files(PDA,Phone,CSC)
4-Load Odin and flash the firmware.
5-All Done,How lucky Your Are.....
6-Feel Free to hit my THANX...
peter_dizai said:
Well,first go to here:
http://forum.xda-developers.com/showthread.php?t=755265
Second: Download 7-zip PC software & extract your official md5 firmware to obtain several other files.
Third:Search the web for a Heimdall How-To(if you didn't find,I'll provide You links)
Last:You'll flash the firmware via Heimdall & again your peace of mind will be back.
Click to expand...
Click to collapse
I tried your method but heimdall says that it can not find a connected download-mode device. My device is in download mode, i put it in this mode with JIG
Hi, excuse my for my stupid question,
there are problem in flashing with non original Samsung USB cable? Isn't it the same with any Micro USB adapter??
espinho said:
Hi, excuse my for my stupid question,
there are problem in flashing with non original Samsung USB cable? Isn't it the same with any Micro USB adapter??
Click to expand...
Click to collapse
generally no, but I recommend strongly to try another micro USB-Cable & another USB Port!
No one of these method does work for me,
any suggest?? my main problem is that the pc does not detect the phone when it's in download-mode. I know how to flash it, but there is not a program that can talk with it!
Can you try to make the operation on another computer?-install usb driver first...
Sent from my Galaxy S with ICS 4.0.4 (Italy)
mrchat9 said:
Can you try to make the operation on another computer?-install usb driver first...
Sent from my Galaxy S with ICS 4.0.4 (Italy)
Click to expand...
Click to collapse
i'll try and i'll make you know
At this time maybe an operating system problem...I'm waiting for your answer!
Sent from my Galaxy S with ICS 4.0.4 (Italy)
Solved
mrchat9 said:
At this time maybe an operating system problem...I'm waiting for your answer!
Sent from my Galaxy S with ICS 4.0.4 (Italy)
Click to expand...
Click to collapse
Hi, changing computer worked. I tried on OSX and didn't work, on Windows 7 on VMware Fusion and didn't work. After all, i tried on a laptop with Windows XP and it solved my problem. Now i get a mobile network error, with one carrier it works and with another it does not. The mobile network detected is always really low.
Dear Forum,
I have a I9001. I've been busy with it for a week now and read and tried allot. Nothing seems to work!
So , my I9001 doesn't have a recovery any more. No root or CWM. The rom works (2.3.5) but crashes or freezes. Then tried every
combo in the book to get into the recovery mode but nothing works.
So I ask you biggest android forum of the world: What the hell is going on??
Tried to get into recovery by recovery boot by pc, tried installing other roms or kernels or whatever.
Also getting a mmc boot mbr read failed when trying above stuff by odin.
Also when I shutdown the phone and I start it up again then it has to be installed again like country and date etc etc...
Thanks in forward for answering.
Greetz,
Happybeat
But download mode still working? Then you could try to flash the recovery via Odin again or a stock Rom, AFAIK those contain the stock recovery as well so afterwards you'll have a "fresh" installed phone... Might work, no other ideas...
M322 said:
But download mode still working? Then you could try to flash the recovery via Odin again or a stock Rom, AFAIK those contain the stock recovery as well so afterwards you'll have a "fresh" installed phone... Might work, no other ideas...
Click to expand...
Click to collapse
AFAIK? I don't know what that is sorry...And yes the download mode works fine.
happybeat said:
AFAIK? I don't know what that is sorry...And yes the download mode works fine.
Click to expand...
Click to collapse
I think that CW did an update and pushed it out to devices or something. I am having the same situation as you, I am unable to grab the device into CWR.
Dark_Savior said:
I think that CW did an update and pushed it out to devices or something. I am having the same situation as you, I am unable to grab the device into CWR.
Click to expand...
Click to collapse
It's insane haha im still trying stuff. Now when I reboot the phone I have to says what country etc etc...but when I try to connect to wifi it says TWLauncher chrashed...I still have connection with the phone by PC. Is there maybe anything what I can change or do?
happybeat said:
AFAIK? I don't know what that is sorry...And yes the download mode works fine.
Click to expand...
Click to collapse
AFAIK - As Far As I Know
happybeat said:
Is there maybe anything what I can change or do?
Click to expand...
Click to collapse
Well if your phone is in such a "bad condition" I would download my stock Rom from sammobile and flash it via Odin, then it should be "factory fresh". The only thing that is annoying is that you set up your phone again...
Sent from my GT-I9001 using xda app-developers app
ell if your phone is in such a "bad condition" I would download my stock Rom from sammobile and flash it via Odin, then it should be "factory fresh". The only thing that is annoying is that you set up your phone again...
Sent from my GT-I9001 using xda app-developers app[/QUOTE]
Ok ill check that out. I'll let you know.
Well I tried and nothing. It says that it passed and that odin did its thing but it didn't.
Is there a program that can do a clean install? Or cant I just clean it when I hook it up to a pc? Because I have access to the internal memory of the phone by pc.
happybeat said:
Well I tried and nothing. It says that it passed and that odin did its thing but it didn't.
Is there a program that can do a clean install? Or cant I just clean it when I hook it up to a pc? Because I have access to the internal memory of the phone by pc.
Click to expand...
Click to collapse
Well I think it should be a clean install and if I connect my phone in download mode to the pc I haven't access to the internal storage!
Did you do it like it is supposed in this tutorial? http://forum.xda-developers.com/showthread.php?t=1922505
By the way are you on a stock rom or not?
Yes, it's important to tell are you on stock or custom Rom
Mikroos said:
Yes, it's important to tell are you on stock or custom Rom
Click to expand...
Click to collapse
Sorry for my late answer!
stock I think. This is every info I have on the phone:
About phone:
Firmware: 2.3.5
baseband: i9001xxkpf
kernel: 2.6.35.7-perf [email protected] #1
build: gingerbread.xxkpg
when I do *#1234#:
pda: i9001xxkpg
phone: i9001xxkpf
csc: i9001xenkp1
That's it...
Ok...this is strange...I just connected it to my pc and have access to it...but when I deleted something what was in download it says delete permant I say yes...when I restart it and connect it back to the pc and go to download its back??
Sorry don't know any solution but I'm quite new in here so maybe you can post it into/revive this thread because the Q&A is (in my opinion) not well visited by I9001 users because it's meant to be for i9000.
http://forum.xda-developers.com/showthread.php?t=1826216
Sent from my GT-I9001 using xda app-developers app
happybeat said:
Ok...this is strange...I just connected it to my pc and have access to it...but when I deleted something what was in download it says delete permant I say yes...when I restart it and connect it back to the pc and go to download its back??
Click to expand...
Click to collapse
Try a reset and if that is not working try a restock.
fotbal5 said:
Try a reset and if that is not working try a restock.
Click to expand...
Click to collapse
Thats the problem. There is no way of getting into recovery mode. I can get into download mode but not into recovery mode. It's like it is vanished.
And I dont know if someone from the mods could put this into the 9100 section? I thought I had to put questions here since there isn't a Q/A for 9001...
happybeat said:
Thats the problem.
Click to expand...
Click to collapse
You can do a factory reset over the dialer on a stock Rom by entering a certain code, you can look it up in the xda wiki about the I9001
Sent from my GT-I9001 using xda app-developers app
M322 said:
You can do a factory reset over the dialer on a stock Rom by entering a certain code, you can look it up in the xda wiki about the I9001
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
Yep did that. Doesnt work. The thing is also that I cant change anything. Everytime when I reboot I need to install again. So it doesnt remember. Same when I connect it to the pc and I remove a file from download that I do not need it doesn't remove the file because the next time I reboot its back. It's like the internal is locked?
I can't find a good page with an explanation, so I'll just type it out myself. If anything isn't clear, ask!
You can try getting into recovery mode using the Android SDK, maybe that could work...
Install the latest version of Samsung Kies if you haven't already (for the USB driver)
Install the Android SDK (http://developer.android.com/sdk/index.html) You'll need just the SDK, everything else is useless for this
Open a command prompt and go to the directory where you have installed the Android SDK (basically you'll run the command cd "<folder>", where folder is something like "C:\Program Files (x86)\Android\android-sdk")
Start your phone and go to Settings > Applications > Development
Enable USB debugging (if it's not there, just find that option and enable it )
Connect your phone using a USB cable
Go back to your command prompt and run the command tools\adb reboot recovery
Hopefully your phone will boot in recovery mode
Good luck!
Marshian said:
I can't find a good page with an explanation, so I'll just type it out myself. If anything isn't clear, ask!
You can try getting into recovery mode using the Android SDK, maybe that could work...
Install the latest version of Samsung Kies if you haven't already (for the USB driver)
Install the Android SDK (http://developer.android.com/sdk/index.html) You'll need just the SDK, everything else is useless for this
Open a command prompt and go to the directory where you have installed the Android SDK (basically you'll run the command cd "<folder>", where folder is something like "C:\Program Files (x86)\Android\android-sdk")
Start your phone and go to Settings > Applications > Development
Enable USB debugging (if it's not there, just find that option and enable it )
Connect your phone using a USB cable
Go back to your command prompt and run the command tools\adb reboot recovery
Hopefully your phone will boot in recovery mode
Good luck!
Click to expand...
Click to collapse
Ok so thank you for this but unfortunatly it just didnt work. I think it is dead. Does Jtagg do any difference? Like hook it up to that machine?
So what it does at this moment:
It starts up but everytime you start up it will ask you to install everything again. So it asks what country etc.etc...
When I am in it appears to work but starting apps just makes it all crash or freeze.
Im a bit lost at the moment to do anything. It just looks that it doesnt memorize.
I can hook it up to the pc but you cant remove or add anything. You can just look and scroll through it.
I'm trying to connect my S-5830L to my PC, and when I do, the phone charges, but there is no option to access mass storage.
It's recognized in Kies, I even update the phone with it, and a hidden removable disk appears when I connect the phone, yet I still can't access the storage.
I tried installing both the driving independently and via Kies.
There is no notification about it in the phone, and I have USB debugging turned on, and I also tried with it off
Anyone knows what I could be doing wrong?
ZeroAE said:
I'm trying to connect my S-5830L to my PC, and when I do, the phone charges, but there is no option to access mass storage.
It's recognized in Kies, I even update the phone with it, and a hidden removable disk appears when I connect the phone, yet I still can't access the storage.
I tried installing both the driving independently and via Kies.
There is no notification about it in the phone, and I have USB debugging turned on, and I also tried with it off
Anyone knows what I could be doing wrong?
Click to expand...
Click to collapse
Was the USB Mass Storage working earlier in your PC? What rom do you use? Is your phone rooted?
mahithm said:
Was the USB Mass Storage working earlier in your PC? What rom do you use? Is your phone rooted?
Click to expand...
Click to collapse
No, a guy I know passed me this phone, and I haven't be able to use the mass storage since the beginning. It's using stock (in fact, I just updated it via Kies), I have never tweaked it before. And no, it seems it isn't rooted.
ZeroAE said:
No, a guy I know passed me this phone, and I haven't be able to use the mass storage since the beginning. It's using stock (in fact, I just updated it via Kies), I have never tweaked it before. And no, it seems it isn't rooted.
Click to expand...
Click to collapse
Go to Recovery Mod and do a "Wipe Data/ Factory Reset" & "Wipe Cache Partition". That should pretty much solve the issue. But if the issue still exists, try flashing the stock rom using odin. Here is the link on how to install stock rom using odin along with all firmwares,
Flash stock rom on Samsung Galaxy Ace S5830 using odin
Once installed, go to Recovery Mod and do a "Wipe Data/ Factory Reset" & "Wipe Cache Partition" (otherwise bootloop might occur). Then restart. Now you have successfully flashed the stock rom. Here is the link for rooting and installing CWM 5 on Samsung Galaxy Ace,
How To Root and Unroot Samsung Galaxy Ace?
CWM 5.0.2.6 fix for Samsung Galaxy Ace S5830
Do post your results. Hope I Helped
It appears I'll have to flash the stock rom, since wiping the data and cache didn't work.
But does it matter which version of ODIN I use?
The one I'm supposed to use doesn't recognize the phone, but the one I used for the Galaxy S4 and S2 do recognize the phone.
might be problem with your samsung mobile driver on your pc.
I have faced same problem.
connect your mobile to pc right click on my computer icon go to manage-device manger
check whether driver is working if not try to reinstall it
ZeroAE said:
It appears I'll have to flash the stock rom, since wiping the data and cache didn't work.
But does it matter which version of ODIN I use?
The one I'm supposed to use doesn't recognize the phone, but the one I used for the Galaxy S4 and S2 do recognize the phone.
Click to expand...
Click to collapse
I completely agree with @amtdwan. It's most probably the drivers that's causing the problem. Updating/ reinstalling it will solve it
I removed the ones that Windows install automatically, and reinstalled the Kies ones, but each time I connect the phone to my PC, Windows install the drivers again.
Is that a problem?
Also, the USB utilities setting is greyed out. And I can't seem to open the file explorer with Kies, it says "drive not valid".
ZeroAE said:
I removed the ones that Windows install automatically, and reinstalled the Kies ones, but each time I connect the phone to my PC, Windows install the drivers again.
Is that a problem?
Also, the USB utilities setting is greyed out. And I can't seem to open the file explorer with Kies, it says "drive not valid".
Click to expand...
Click to collapse
BTW does "Turn on USB Storage" pop up now in your phone when you connect it to PC? If yes click it, then can you try opening using Windows file explorer rather than Kies? Do post the result. Hope I Helped
mahithm said:
BTW does "Turn on USB Storage" pop up now in your phone when you connect it to PC? If yes click it, then can you try opening using Windows file explorer rather than Kies? Do post the result. Hope I Helped
Click to expand...
Click to collapse
Nope, it doesn't =(
ZeroAE said:
Nope, it doesn't =(
Click to expand...
Click to collapse
Which version of odin are you using?
mahithm said:
Which version of odin are you using?
Click to expand...
Click to collapse
I'm trying to use 'Odin Multi Downloader V.4.42", but it doesn't recognize the phone.
But when I try to use Odin3 V1.85 or Odin3 V3.09, it recognizes it.
ZeroAE said:
I'm trying to use 'Odin Multi Downloader V.4.42", but it doesn't recognize the phone.
But when I try to use Odin3 V1.85 or Odin3 V3.09, it recognizes it.
Click to expand...
Click to collapse
Each device has its own odin. For Samsung Galaxy Ace S5830, the most stable odin is S5830 Odin Multi Downloader v4.38. You can find this in the link mentioned previously. I will provide the same the link again. Go to the "Preparation" section where you will find all the necessary downloads including the drivers.
Flash stock rom on Samsung Galaxy Ace S5830 using odin
Can you try this version of odin with the drivers mentioned above and see if it works? Do post the results. Hope I Helped
mahithm said:
Each device has its own odin. For Samsung Galaxy Ace S5830, the most stable odin is S5830 Odin Multi Downloader v4.38. You can find this in the link mentioned previously. I will provide the same the link again. Go to the "Preparation" section where you will find all the necessary downloads including the drivers.
Flash stock rom on Samsung Galaxy Ace S5830 using odin
Can you try this version of odin with the drivers mentioned above and see if it works? Do post the results. Hope I Helped
Click to expand...
Click to collapse
I was able to flash the phone using your steps, but it still doesn't open in explorer.
I guess I'm giving up, since nothing I've tried worked.
Thanks anyways, mahithm.
ZeroAE said:
I was able to flash the phone using your steps, but it still doesn't open in explorer.
I guess I'm giving up, since nothing I've tried worked.
Thanks anyways, mahithm.
Click to expand...
Click to collapse
So does "Turn on USB Storage" pop up now in your phone when you connect it to PC? Did you use the firmware from the site I mentioned? This problem could be caused if you have a faulty firmware. Also make sure you have a working sdcard. Sometimes faulty sdcard also cause such errors. Last but no the least, you can use the USBMassStorage app I developed. For it to work, you need a rooted phone. I'll provide you all the necessary link. Don't forget to read all the guidelines before using the app.
How To Root and Unroot Samsung Galaxy Ace?
CWM 5.0.2.6 fix for Samsung Galaxy Ace S5830
USBMassStorage App for Samsung Galaxy Ace S5830
I hope this solution works. Also we at XDA Developers are always happy to help our fellow comrade in trouble
does your pc shows
device is not recognize by windows
Hello.I am in some kind of a trouble..I just bought a phone with firmware problems,hoping i could make it work.The problem is this,someone tried to update the firmware,unsuccesfully,and now it's stuck with no OS.I can only start recovery and bootloader.
Recovery is Teamwin 2.6.3.3.Already tried to clear cache and everything,to use an USB with OTG,but it's not recognised,ADB sideload also it's not working.
adb devices shows the phone is not connected,and FastBoot says "Waiting for device".Any idea? I've tried,read a lot,but I can't really work it out..
Also,I can't find the device in Device Manager,neither in ADB nor Fastboot.
I tried using Windows 8.1 and 7..Same deal.
Thank you!
chris_b0ss said:
Hello.I am in some kind of a trouble..I just bought a phone with firmware problems,hoping i could make it work.The problem is this,someone tried to update the firmware,unsuccesfully,and now it's stuck with no OS.I can only start recovery and bootloader.
Recovery is Teamwin 2.6.3.3.Already tried to clear cache and everything,to use an USB with OTG,but it's not recognised,ADB sideload also it's not working.
adb devices shows the phone is not connected,and FastBoot says "Waiting for device".Any idea? I've tried,read a lot,but I can't really work it out..
I tried using Windows 8.1 and 7..Same deal.
Thank you!
Click to expand...
Click to collapse
Is it a M8 or a M7, because your title says M8 but you have posted in the M7 forum.
Sorry,I am quite scared.It's M7.
chris_b0ss said:
Sorry,I am quite scared.It's M7.
Click to expand...
Click to collapse
First, follow instructions given in this post to install the latest android sdk-tools and the latest htc drivers. Also make sure you don't have HTC Sync installed on your computer.
Then connect your phone to you computer with the original cable (or any other cable already known to work for data transfer - some usb cable are only providing power), reboot the phone in bootloader mode by holding vol down and power. Make sure you see the red "fastboot usb" caption on the screen, if not use vol up/down and power to select the "fastboot" menu. Once there open a command window form the android sdk-tools folder and type "fastboot getvar all". Copy/paste the ouput of this command here (except the imei and serialno).
I've followed that,and still not working.pics attached.
It's very weird,because I was expecting for a soundfrom the Windows,like a new device connected .But ..nothing
Sent from my GT-I9100 using XDA Free mobile app
chris_b0ss said:
I've followed that,and still not working.pics attached.
It's very weird,because I was expecting for a soundfrom the Windows,like a new device connected .But ..nothing
Sent from my GT-I9100 using XDA Free mobile app
Click to expand...
Click to collapse
With your phone in bootloader/fastboot mode, go to your windows device manager, take a screenshot of your device manager and post it here please.
The unknown device is related to my laptop.Nothing happens when I connect the phone.
chris_b0ss said:
The unknown device is related to my laptop.Nothing happens when I connect the phone.
Click to expand...
Click to collapse
Ok so its not detected at all
Might be caused by
a bad usb cable --> Try another one that you are 100% sure its working
a bad usb port on the computer (use only usb 2.0 ports btw)
a problem with the computer ---> Try another computer.
a bad usb port on the phone ---> need to replace the usb/front mic board
Might also worth to fix your laptop drivers problem. Might be causing problem if the "unknown" device is an adapter or usb controller...
Then reboot the computer.
I think we can exclude the first two,because I've tried 2 different USB cables,and with my S2 ,both of them are working,even ADB.I will try to replace the usb port from the phone,and then try again.But,do you think it will work ?
Thank you!
chris_b0ss said:
I think we can exclude the first two,because I've tried 2 different USB cables,and with my S2 ,both of them are working,even ADB.I will try to replace the usb port from the phone,and then try again.But,do you think it will work ?
Thank you!
Click to expand...
Click to collapse
Its hard to tell, there isn't any background info about what was done on that phone. The usb board is pretty cheap so it worth a try if you are 100% sure everything else is fine (computer, cables etc..)
I understand,but,I mean,as far as I know,it's not hard brick,because the phone is still booting..in some way ..so if I manage to connect it,I can flash the rom..am I right?
Sent from my GT-I9100 using XDA Free mobile app
chris_b0ss said:
I understand,but,I mean,as far as I know,it's not hard brick,because the phone is still booting..in some way ..so if I manage to connect it,I can flash the rom..am I right?
Sent from my GT-I9100 using XDA Free mobile app
Click to expand...
Click to collapse
Normally it should be pretty easy to fix if you can get fastboot and adb connectivity. You could then update the firmware so you can flash the correct RUU to restore the phone back to stock, already made the research and all the files (firmware and ruu) you'll need are available.
alray said:
Normally it should be pretty easy to fix if you can get fastboot and adb connectivity. You could then update the firmware so you can flash the correct RUU to restore the phone back to stock, already made the research and all the files (firmware and ruu) you'll need are available.
Click to expand...
Click to collapse
Sorry for the late reply,the phone is now in service,in 1-2 days they should fix the USB board,and I will get back with more info soon.
Thank you very much for your quick answers and for taking time to help me!
Good news,I've managed to unbrick it.I asked a friend with a Mac to check it out,and his Mac recognized with no problems.Installed the Os,but still,Windows can't detect it.I've tried on 2 pc's(7 and 10) with the proper drivers.Weird..
Anyway,thank you for your time @alray !