Related
Hi guys,
I have a few problems with my Motorola Milestone.
1. I can't get in to recovery. I only get an black screen (backlight is on)
2. I don't get any video in the bootloader. but RSD lite does recognizes it, and is able to flash it. When it's flashing I do get video only stating that there is software update busy.
3. When I boot up my phone I don’t get, a Motorola logo, but just a black screen (back light on) followed by the Android logo after a few minutes.
4. If I try to wake up the phone, the screen remains black, but the hardware keys to light up, I have to press the lock button multiple times to activate the screen. - Note when the screen remains black, it is responsive and I can unlock the phone, but it still remains black. And sometimes the colors are inverted, but when i make a screen of it with Screen Grabber (shoot me) it's in normal colors.
That kind of sums it up.
I have tried a few things to fix it. I have:
1. Cleared caches, and personal data
2. Flashed a different SBF en recovery
And since I can’t get in to recovery, I had to get Root via Z4 Root method and it works fine.
Afterwards I downloaden Rom-manger, and installed the ClockWork recovery, and tried to boot in Recovery via clockwork, but that didn’t work either. I also can’t get in to Recovery via a cold boot
I think the problems started when I was using CyanogenMod 7 RC4. It worked just fine, but after I installed it I couldn't get in to recovery.
Can I try something else to fix it? or should I flash it back to original state and RMA it?
Edit some additional information:
Frimware: 2.2.1
Frimware configuration: GAS_EMEA_UCAMS1FRYOQWRTEU_P005
Baseband version: 3GSMPU91A_U_91.09.00I
Baseband configuratuin version:UCALHLSMR2EMEAB1B806E.0R
Kernel Versuin: 2.6.32.9-ge635aa4 [email protected]#1
Build Number: SHOLS_U2_05.06.0
And is it possible to restore the orginal boot animation, without recovery?
TL.DR: Motorola Milestone --> CyanogenMod 7 RC4 --> no recovery & no video @ bootloader, plus additinal video problems --> back to orginal --> same problems.
BUMP: is there anyone with a possible soulution?
ClockWork recovery doesn't work on milestone.
So CM7 does boot up?
zeppelinrox said:
ClockWork recovery doesn't work on milestone.
So CM7 does boot up?
Click to expand...
Click to collapse
CM7 doesn't anymore as I removed it, and flashed a different SBF and recovery.
CyanogenMod 7 RC4 worked fine but I had a few video problems, and I could get in to recovery.
I will flash a different recovery tonight and try it out.
Only use androidiani open recovery
Sent from my Milestone using Tapatalk
zeppelinrox said:
Only use androidiani open recovery
Sent from my Milestone using Tapatalk
Click to expand...
Click to collapse
Flashed a different .sbf and placed the androidiani open recovery files on the Sd card root, but i still can't get in to recovery. I won't even get the /!\ screen. The phone does turn on, but will only get a black screen.
Which sbf?
Sent from my Milestone using Tapatalk
UK SHOLS_U2_02.36.0
I think I bricked it, I'm going to try to restore it or buy a new phone... >.<
BloemBlaster said:
UK SHOLS_U2_02.36.0
I think I bricked it, I'm going to try to restore it or buy a new phone... >.<
Click to expand...
Click to collapse
I don't think you bricked it... but damaged it in some way.
Could also be some hardware related stuff in the end.
Anyway try to wipe everything, that could be wiped.
Start into bootloader and try to install G.O.T. 2.2.1 using RSD again.
This one got the vulnerable recovery already integrated.
Then try to use the specific G.O.T. OpenRecovery on your sdcard to check system integrity.
Please try to take care of every single step and check out what happens....
If your hardware is doing fine, i'm pretty sure that you will get a working phone again.
P.S.: How about your bootloader version?
Good luck,
scholbert
scholbert said:
I don't think you bricked it... but damaged it in some way.
Could also be some hardware related stuff in the end.
Anyway try to wipe everything, that could be wiped.
Start into bootloader and try to install G.O.T. 2.2.1 using RSD again.
This one got the vulnerable recovery already integrated.
Then try to use the specific G.O.T. OpenRecovery on your sdcard to check system integrity.
Please try to take care of every single step and check out what happens....
If your hardware is doing fine, i'm pretty sure that you will get a working phone again.
P.S.: How about your bootloader version?
Good luck,
scholbert
Click to expand...
Click to collapse
I think my boatloader is 90.47 I'm not sure as I won't get any video in the boatloader.
I flashed the G.O.T 2.2.1but I can't get in to recovery, there is still no video only a blackscreen.
Is it posible the may have deleted the files for the logo?
BloemBlaster said:
I think my boatloader is 90.47 I'm not sure as I won't get any video in the boatloader.
I flashed the G.O.T 2.2.1but I can't get in to recovery, there is still no video only a blackscreen.
Is it posible the may have deleted the files for the logo?
Click to expand...
Click to collapse
You can try upgrading your bootloader to 90.78 from here.
Then try flashing GOT 2.2.1, then see if AOR boots up.
sileshn said:
You can try upgrading your bootloader to 90.78 from here.
Then try flashing GOT 2.2.1, then see if AOR boots up.
Click to expand...
Click to collapse
I flashed 90.78, and then reflashed GOT 2.2.1, but is still can't get into te recovery. I getting the same result, no motorola logo and a black screen with no /!\ logo
If your phone is recognised in adb, then you can use the link below to get into AOR directly. Just make sure you have AOR extracted to your sdcard.
http://forum.xda-developers.com/showthread.php?t=625950
Check the commands in the last post and enter them in order.
I was just looking at QtADB for somebody else's problem but it looks like you can use QtADB to boot recovery if the phone is recognized.
http://qtadb.wordpress.com/features/
Hi guys,
sorry for the late reply, but I'm also moving at the moment.
I have tired numerous things.
If I flash the 2.2.1 Firmware SHOLS_U2_05.26, I can get to the recovery selection screen, with the /!\ screen.
But if apply update.zip I will get an error message, stating "EOCD marker occurs after start of EOCD E:signature verification failed", something like that, I don't know the specific message out of my head
And if I flash a vurnable recovery only sbf, with the SHOLS_U2_05.26 I can't get the recovery screen, only a black screen.
zeppelinrox said:
I was just looking at QtADB for somebody else's problem but it looks like you can use QtADB to boot recovery if the phone is recognized.
http://qtadb.wordpress.com/features/
Click to expand...
Click to collapse
I will try thiss when I get home.
sileshn said:
If your phone is recognised in adb, then you can use the link below to get into AOR directly. Just make sure you have AOR extracted to your sdcard.
http://forum.xda-developers.com/showthread.php?t=625950
Check the commands in the last post and enter them in order.
Click to expand...
Click to collapse
I will try this if zepplelinrox method fails becaus I don't have any experince with adb. But the phone is recognised.
...........strange....
BloemBlaster said:
If I flash the 2.2.1 Firmware SHOLS_U2_05.26, I can get to the recovery selection screen, with the /!\ screen.
But if apply update.zip I will get an error message, stating "EOCD marker occurs after start of EOCD E:signature verification failed", something like that, I don't know the specific message out of my head
Click to expand...
Click to collapse
This is standard error, if vulnerable recovery is not installed and you try to start OpenRecovery.
BloemBlaster said:
And if I flash a vurnable recovery only sbf, with the SHOLS_U2_05.26 I can't get the recovery screen, only a black screen.
Click to expand...
Click to collapse
This is strange behaviour...
My last guess is, that something might be wrong with your vulnerable recovery sbf file (file corruption ???). There should have been some errors during flash...
Anyway, you might grab it here and try again:
http://gitorious.org/droid/openrecovery/blobs/master/zips/SHOLS/vulnerable_recovery.sbf
Good luck!
scholbert
sileshn said:
If your phone is recognised in adb, then you can use the link below to get into AOR directly. Just make sure you have AOR extracted to your sdcard.
http://forum.xda-developers.com/showthread.php?t=625950
Check the commands in the last post and enter them in order.
Click to expand...
Click to collapse
Still trying this, no luck yet. ADB isn't my strongest point
zeppelinrox said:
I was just looking at QtADB for somebody else's problem but it looks like you can use QtADB to boot recovery if the phone is recognized.
http://qtadb.wordpress.com/features/
Click to expand...
Click to collapse
The same goes for you, no luck yet. QtADB, work and it recognise my phone, but i can't any (re)boot commands.
scholbert said:
This is standard error, if vulnerable recovery is not installed and you try to start OpenRecovery.
This is strange behaviour...
My last guess is, that something might be wrong with your vulnerable recovery sbf file (file corruption ???). There should have been some errors during flash...
Anyway, you might grab it here and try again:
http://gitorious.org/droid/openrecovery/blobs/master/zips/SHOLS/vulnerable_recovery.sbf
Good luck!
scholbert
Click to expand...
Click to collapse
I actually have no idea how to download the sbf, form the site you have provided.
nevermind, I found it out . but now if my phone to connect to windows it doesn't recognizes it :S
BloemBlaster said:
but now if my phone to connect to windows it doesn't recognizes it :S
Click to expand...
Click to collapse
Before or after flashing the vulnerable recovery again?
Confusing...
scholbert
scholbert said:
Before or after flashing the vulnerable recovery again?
Confusing...
scholbert
Click to expand...
Click to collapse
Sorry for being confusing, it was after flashing vulnerable recovery, but my I'm flashing with a different system now and it working just fine.
If I try the .sbf you provided RSD gives a error "Failed flashing process. failed flashing process (0x17100);phone connected"
BloemBlaster said:
Sorry for being confusing, it was after flashing vulnerable recovery, but my I'm flashing with a different system now and it working just fine.
Click to expand...
Click to collapse
No problem...
BloemBlaster said:
If I try the .sbf you provided RSD gives a error "Failed flashing process. failed flashing process (0x17100);phone connected"
Click to expand...
Click to collapse
O.K. seems that something went wrong during download grab it here:
http://forum.xda-developers.com/showpost.php?p=13039348&postcount=17
BTW the link points to the OpenRecovery developers git rep... so this file is absolutely save.
Cheers,
scholbert
Hey guys,
I just recently got a refurb Droid 3 after my old one had the backlight go out, I hand't had a chance to bootstrap it and put ICS on it. But I was able to get it rooted. I restarted my phone today and ever since it has been stuck at the M logo screen and I've tried everything I can find to remedy this.
I updated this morning to the most recent OTA update (5.7.906 I believe) and then rooted it.
To fix the issue I've tried a few different things. I tried Pete's SBF to 5.7.890 but I was getting an error about the cbt.bin file. I found that with the recent changed to 5.7.906 you aren't able to directly flash over it to go back to 5.7.890. I then found another post on here which had a script to go back to 5.7.890 from 5.7.906. I ran that and still had the same result.
Any other ideas or anything that I am missing?
I can get into fastboot, I've been using the scripts with moto-fastboot. Normal boot is just leaving me at the M logo, booting into recovery yields the same result.
Any help would be appreciated since I have no clue what else I can do at this point...
seems like a soft brick... should be fixable...
With the phone off, hold me, then the power button... then go down to BT TOOLS and select it ( volume up is the select button _ so when u do that it doesnt go to it?
try following this thread
http://forum.xda-developers.com/showthread.php?t=1336980
heres a download link
http://minus.com/lbkaxv58pO5MDp
Juicy555 said:
seems like a soft brick... should be fixable...
With the phone off, hold me, then the power button... then go down to BT TOOLS and select it ( volume up is the select button _ so when u do that it doesnt go to it?
try following this thread
http://forum.xda-developers.com/showthread.php?t=1336980
heres a download link
http://minus.com/lbkaxv58pO5MDp
Click to expand...
Click to collapse
I don't have a BT Tools selection. I do have BP Tools though. I selected it and it just sits there on the M logo as well...
I've tried a few of Pete's scripts with no luck so far (worked on the old Droid 3 when I put it back to stock before shipping it back).
Juicy555 said:
seems like a soft brick... should be fixable...
With the phone off, hold me, then the power button... then go down to BT TOOLS and select it ( volume up is the select button _ so when u do that it doesnt go to it?
try following this thread
http://forum.xda-developers.com/showthread.php?t=1336980
heres a download link
http://minus.com/lbkaxv58pO5MDp
Click to expand...
Click to collapse
Gave the one that you linked a try, get "Preflash validation failure" for Recovery and Boot.
Any other ideas?
imperpetual said:
Gave the one that you linked a try, get "Preflash validation failure" for Recovery and Boot.
Any other ideas?
Click to expand...
Click to collapse
it will not flash if your phone is not charged to at least 50%.. make sure its charged...
Juicy555 said:
it will not flash if your phone is not charged to at least 50%.. make sure its charged...
Click to expand...
Click to collapse
It is charged. When it's not charged it gives the "LOW BATTERY" error.
click the link in my signature
and follow the directions in my thread and you will be fine
you updated your phone to. 906 all of the older sbf's wont work..but mine will as it is specifically for. 906
ovelayer said:
click the link in my signature
and follow the directions in my thread and you will be fine
you updated your phone to. 906 all of the older sbf's wont work..but mine will as it is specifically for. 906
Click to expand...
Click to collapse
Your 1 Click SBF ran fine and completed without errors but I'm still getting the same result, stuck at M logo.
Is there something I could be missing which is making it not boot that most SBFs don't include? That's the only thing I can think of at this point.
imperpetual said:
Your 1 Click SBF ran fine and completed without errors but I'm still getting the same result, stuck at M logo.
Is there something I could be missing which is making it not boot that most SBFs don't include? That's the only thing I can think of at this point.
Click to expand...
Click to collapse
okay right after you use the 1click sbf
go HERE
download the. 906 update
place it on your external sdcard..
reboot into STOCK recovery and install the update
reboot
try that
ovelayer said:
okay right after you use the 1click sbf
go HERE
download the. 906 update
place it on your external sdcard..
reboot into STOCK recovery and install the update
reboot
try that
Click to expand...
Click to collapse
I'm fairly certain that could work, if I could ever get into the Stock recovery....I'm not able to boot into anything. Going to try a few other things, if nothing else works I'll just take it in and see if I can get yet another warranty replacement.
Thanks for the responses, if you have any other ideas just let me know.
I think the main thing that needs to be addressed is that I need to be able to get into recovery and then I will be set to fix it. Right now it just sits at the M logo for Recovery (and any other options from the boot menu).
Hi!
I just rooted my brand new LG optimus 4x HD, and when I was going to install cyanogenmod on it, the phone stopped working. I pressed to restart in recovery and installing the rom, but when it was about to restart, it only says something like: unrecoverable boot loader, and something with kernel. I don't know what this means, but I hope there is a way to fix this, because the phone is brand new, and now I can't even start it.
Some suggestions?
Taynor said:
Hi!
I just rooted my brand new LG optimus 4x HD, and when I was going to install cyanogenmod on it, the phone stopped working. I pressed to restart in recovery and installing the rom, but when it was about to restart, it only says something like: unrecoverable boot loader, and something with kernel. I don't know what this means, but I hope there is a way to fix this, because the phone is brand new, and now I can't even start it.
Some suggestions?
Click to expand...
Click to collapse
Just flash original stock KDZ file with kdz flasher.
If you want to install CM, you do not need a rooted phone, but an unlocked bootloader.
Check the respective threads for details on how to unlock the phone and then flash CM.
Taynor said:
Hi!
I just rooted my brand new LG optimus 4x HD, and when I was going to install cyanogenmod on it, the phone stopped working. I pressed to restart in recovery and installing the rom, but when it was about to restart, it only says something like: unrecoverable boot loader, and something with kernel. I don't know what this means, but I hope there is a way to fix this, because the phone is brand new, and now I can't even start it.
Some suggestions?
Click to expand...
Click to collapse
try flashing the stock rom again
to fix this problem
seems like something went wrong maybe
go in dev section to find how
Soul reaper said:
try flashing the stock rom again
to fix this problem
seems like something went wrong maybe
go in dev section to find how
Click to expand...
Click to collapse
But how am I supposed to do anything when I can't even start my phone? :/
Taynor said:
But how am I supposed to do anything when I can't even start my phone? :/
Click to expand...
Click to collapse
Enter software upgrade mode. Better yet http://forum.xda-developers.com/showthread.php?t=2069723
anGel_pLayer said:
Enter software upgrade mode. Better yet http://forum.xda-developers.com/showthread.php?t=2069723
Click to expand...
Click to collapse
ok, i'll try that in a couple of hours when I get home, Thanks everyone! I'll be back if there is another problem
in the lg pc suite that comes with the phone there is an option in "Device" for "emergency firmware recovery" this should be a relatively easy way to restore your phone if it allows you to do it without booting up otherwise use the method posted earlier. to get into the correct mode on the phone turn phone off, then whilst holding vol- plug in the usb (don't press power button) this should enter software upgrade mode.
after this you will lose root and if you unlocked your bootloader will relock it.
i used this http://forum.xda-developers.com/showthread.php?t=2256392 all in one tool to root and this http://forum.xda-developers.com/showpost.php?p=40918727&postcount=108 to unlock bootloader, you can use the all in one tool (from rooting) to install cwm after you have unlocked bootloader.
I hope this helps
maff90 said:
in the lg pc suite that comes with the phone there is an option in "Device" for "emergency firmware recovery" this should be a relatively easy way to restore your phone if it allows you to do it without booting up otherwise use the method posted earlier. to get into the correct mode on the phone turn phone off, then whilst holding vol- plug in the usb (don't press power button) this should enter software upgrade mode.
after this you will lose root and if you unlocked your bootloader will relock it.
i used this http://forum.xda-developers.com/showthread.php?t=2256392 all in one tool to root and this http://forum.xda-developers.com/showpost.php?p=40918727&postcount=108 to unlock bootloader, you can use the all in one tool (from rooting) to install cwm after you have unlocked bootloader.
I hope this helps
Click to expand...
Click to collapse
I tried to root via the all-in-one toolbox, but I don't get how I am supposed to do... And after trying to do some things and factory resets, I'm unable to start my phone again. This time i'm stuck on bootscreen. And I can't seem to get to the S/W Upgrade screen again, i don't know why...
Is there something i can do with ADB sideload?
Taynor said:
I tried to root via the all-in-one toolbox, but I don't get how I am supposed to do... And after trying to do some things and factory resets, I'm unable to start my phone again. This time i'm stuck on bootscreen. And I can't seem to get to the S/W Upgrade screen again, i don't know why...
Is there something i can do with ADB sideload?
Click to expand...
Click to collapse
Open and reinsert your battery. It may help.
It helped me when couldn't get into s/w upgrade mode after flashing CyanogenMod RC2.
Subhajitdas298 said:
Open and reinsert your battery. It may help.
It helped me when couldn't get into s/w upgrade mode after flashing CyanogenMod RC2.
Click to expand...
Click to collapse
I try to flash to RC2 too... But without success. How do I get into S/W Upgrade mode? nothing works, and holding down volume button doesn't make anything happen :/
Taynor said:
I try to flash to RC2 too... But without success. How do I get into S/W Upgrade mode? nothing works, and holding down volume button doesn't make anything happen :/
Click to expand...
Click to collapse
to get into S/W upgrade mode, remove battery, insert battery, hold the vol-, and plug in a usb attached to a computer (keep holding vol-).
hope this helps. also try a different pc usb port or a different cable (just to eliminate any variables)
maff90 said:
to get into S/W upgrade mode, remove battery, insert battery, hold the vol-, and plug in a usb attached to a computer (keep holding vol-).
hope this helps. also try a different pc usb port or a different cable (just to eliminate any variables)
Click to expand...
Click to collapse
For how long do I need to hold down the volume button?
Taynor said:
For how long do I need to hold down the volume button?
Click to expand...
Click to collapse
it should only be about 15secs before the s/w update mode starts
just to make it clear i made a video http://www.youtube.com/watch?v=F0Vw-ZTr3xY
maff90 said:
it should only be about 15secs before the s/w update mode starts
just to make it clear i made a video http://www.youtube.com/watch?v=F0Vw-ZTr3xY
Click to expand...
Click to collapse
Thank you so much for the video, it worked and now my phone is rooted and alive, now I just have to figure out how to flash a custom rom into it and the CMW recovery...
Good to see you ok. CWM needs unlocked bootloader not just root.
Taynor said:
Thank you so much for the video, it worked and now my phone is rooted and alive, now I just have to figure out how to flash a custom rom into it and the CMW recovery...
Click to expand...
Click to collapse
I don't know why didn't you understand my words but glad that you are running well now. For CWM or a custom rom, you need unlocked the bootloader not root.
I've managed to fix it now, I don't know how, but it worked thanks everyone for the help, running cm10.1 now
Is there anyway i can dowbload lg+ tag and quick memo? It isnt included in the rom :/
No, but I did a factory reset and flashed the rom, and then the stock apps werent included
astr_x said:
If you want to install CM, you do not need a rooted phone, but an unlocked bootloader.
Check the respective threads for details on how to unlock the phone and then flash CM.
Click to expand...
Click to collapse
Hi astr_x,
Do you have any example links for the respective threads you mention? I have tried adb and fastboot. I hold Volume down + plug into my computer and I get the Unrecoverable bootloader error that was mentioned above. In fact, I get this error even when I plug my phone to a normal plug (and not PC). Anyway, I connect my phone to my laptop (I always get the error mentioned) and when I type the relative adb+fastboot command in cmd (after installing all the relative drivers), I get "Error: Unknown device".
Any thoughts?
Hi everyone
After a lot of reading i decided to install a ROM. Now i was able to try to but none of them worked, so i ve been trying now for 3 days. I think i did it all as stated in this forums, it launched but never go to really open the OS, used to get stuck at the motorola or nexus logos or what ever logo from the different ROMs i downloaded.
I was able to go back to the original ROM but today im not being able to do so...
What can i do? Im at recovery and im able to restore boot but at system it says:Error while restoring /system!
I had it backedup at pc so i have also removed the one at sd card and tried with the one from PC.
What can i do (that doesnt involve getting another phone)
You can try RSDLite to flash back stock ROM just be careful and flash right ROM, otherwise you can brick your phone. You can't flash custom ROMs with RSD.
mm166 said:
You can try RSDLite to flash back stock ROM just be careful and flash right ROM, otherwise you can brick your phone. You can't flash custom ROMs with RSD.
Click to expand...
Click to collapse
Attempting in 3..2..1..................
It doesnt let me use decompress and flash... im decompressing and will see if there is an option to flash after that...
Ok my issue is that phone is not recognized by the RSD... i know update the drivers bla blaaa... how if its not recognized and the MDM needs the phone connected to be updated and in my country i know noone else with a damn Motorola phone... ideas ?
MrPersonality said:
Ok my issue is that phone is not recognized by the RSD... i know update the drivers bla blaaa... how if its not recognized and the MDM needs the phone connected to be updated and in my country i know noone else with a damn Motorola phone... ideas ?
Click to expand...
Click to collapse
Boot the phone into bootloader/fastboot?
You have an unlocked bootloader and custom recovery installed? I assume you have both since you were trying to install custom ROMs.
I have tried to the fastboot... im trying AP fastboot and theres where i am stuck right now.
Yes custome recovery and unlocked bootloader there. I had the phone moved to another couple of roms but the never loaded correctly so i went back to my original ROM, i tried a few other ROMs and none worked so this time i try to go back but it doesnt come back anymore... :laugh:
Try downloading PhilzAdvanced CWM Recovery. It is based off the latest CWM and should be able to flash your backups or ROMS. Maybe not your backups unless you made them with a CWM based recovery, but it should get you booted up.
kingatmos said:
Try downloading PhilzAdvanced CWM Recovery. It is based off the latest CWM and should be able to flash your backups or ROMS. Maybe not your backups unless you made them with a CWM based recovery, but it should get you booted up.
Click to expand...
Click to collapse
Is it possible to do that? I mean right now my phone only boots to fastboot you know... i may flash a rom (which didnt work with any from this forum neither with CM) but i cant install anything in my phone so... how can i do that?
MrPersonality said:
Is it possible to do that? I mean right now my phone only boots to fastboot you know... i may flash a rom (which didnt work with any from this forum neither with CM) but i cant install anything in my phone so... how can i do that?
Click to expand...
Click to collapse
1. Read the Myth Tools OP
2. Download Myth Tools
3. Download Philz CWM
4. Download a stock fastboot
5. Place the fastboot zip and the extracted recovery/cwm.img in their respected folders
6. Run Myth's executable and follow the instructions
7. If that doesn't work then read the faqs here and in the RAZR HD forums, all your questions have been answered already.
Still with same issue...
Phone is not recognized by the computer (tried 3 different laptops)
Cannot download the Drivers as its an automated process that begins when you connect the phone...
Does anyone knows an alternative to install AHD drivers ?
MrPersonality said:
Still with same issue...
Phone is not recognized by the computer (tried 3 different laptops)
Cannot download the Drivers as its an automated process that begins when you connect the phone...
Does anyone knows an alternative to install AHD drivers ?
Click to expand...
Click to collapse
Did you not see the mythtools menu option for drivers?
Sent from my MB886 using xda app-developers app
palmbeach05 said:
Did you not see the mythtools menu option for drivers?
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
Again, my main issue device not detected by pc... so i cant download drivers using automatic tools that detects the phone because again phone is not detected and mythtools goes straight to the motorola device manager which needs a phone connected to act... so in a very bad circle i am... and i would try to use someone else phone but here in Costa Rica i know of noone else with a Motorola phone... everyone thinks it no longer exists... and i havent found a way to download the specific drivers for my specific device in a way it doesnt require to be connected.
You can boot into recovery? If so download the latest philztouch cwm recovery, put it on your sd card, and flash it from recovery. Then flash the ROM you want.
Sent from my MB886 using Tapatalk
kingatmos said:
You can boot into recovery? If so download the latest philztouch cwm recovery, put it on your sd card, and flash it from recovery. Then flash the ROM you want.
Sent from my MB886 using Tapatalk
Click to expand...
Click to collapse
Nice i managed to flash the philztouch recovery... the damn phone doesn't want to accept any ROM... keeps aborting them. So far thanks a lot... ill read like crazy today again and ill ask for help if failure salutes me again!
:highfive:
If you made a backup of your stock after rooting try flashing that and then hooking your phone up to your pc
Sent from my MB886 using Tapatalk
It finally works
It works... i think somehow the recovery stopped working at some point... now with Philz phone was recognized by pc and i was able to use Myth tools to do the job. I think this will be my last Motorola...
Things to highlight:
1 i did read a lot before doing anything, still somehow screwed up, did read lots before asking here, still needed to ask... got answers, still needed to ask more... it was fun as everyone at work said: " its bricked fool buy a new one and stop playing to be good at something" but hell yeah its fixed!
2 i will try again to install another rom, i wont give up damn it!
3 i might begin with my wife Note 1, its old so its ok to brick it ha ha ha
4 damn it guys you are cool... wish i were 10% of you guys!
5 I think instead of all those different options out there we should recommend only to use the myth tools, its a complete package and its easy to use even with examples for newbies like me.
Again thanks and questions on friday after i brick it again e he he he...
The other stuff is there so you can understand what the automated stuff is actually doing.
Sent from my MB886 using Tapatalk
Ok so i have started the process again. I cant tell what i am doing wrong. I have flashed 2 different roms and none worked... its like im missing something.
I root the device, unlock bootloader... set the recovery with cwm... flash the rom... and it goes to moto logo and then black screen... am i missing something?
I did the exact same for the stock rom and it did work... also i did it all exactly the same using now myth tools... so any ideas? Should i leave the phone alone because its just simply not going to work or am i missing anything?
I have root and unlocked bootloader. I did an update of lg and thereafter blocked, do not know if this was the problem.
Install the CWM by room (room enox iodak08 +), I can enter the bootloader, installing, when reboot the sistem entering the boot but does not start with the system and back to CWM after being taken. I can not get into the room and I can get into CWM. I've done factory reset and wipecache, I returned instal to the room, and nothing, enters the boot but does not start with the room.
I'm in a tricky situation, I stopped to have a mobile phone and I stick one paperweights. Need a little help.
Manholas said:
I have root and unlocked bootloader. I did an update of lg and thereafter blocked, do not know if this was the problem.
Install the CWM by room (room enox iodak08 +), I can enter the bootloader, installing, when reboot the sistem entering the boot but does not start with the system and back to CWM after being taken. I can not get into the room and I can get into CWM. I've done factory reset and wipecache, I returned instal to the room, and nothing, enters the boot but does not start with the room.
I'm in a tricky situation, I stopped to have a mobile phone and I stick one paperweights. Need a little help.
Click to expand...
Click to collapse
As always - flash a kdz and start from scratch if you can't get it working. And ... SEARCH
SimonTS said:
As always - flash a kdz and start from scratch if you can't get it working. And ... SEARCH
Click to expand...
Click to collapse
I can not get the pc to recognize the phone. I already have the KDZ file (V20A_00.kdz)
Manholas said:
I can not get the pc to recognize the phone. I already have the KDZ file (V20A_00.kdz)
Click to expand...
Click to collapse
Install or reinstall latest drivers from LG and try again when it does'nt work change usb port or try it on other PC.
Good Luck..
as I am in CWM recovery, removed the sd card and put a room.zip and flash. Did the installation but when "reboot sistem" back to cwm recovery.
The problem is that the Phone was locked into CWM recovery. And I have no way to recognize the phone on PC. Is there any way to unlock the CWM recovery v6.0.4.5?
Manholas said:
The problem is that the Phone was locked into CWM recovery. And I have no way to recognize the phone on PC. Is there any way to unlock the CWM recovery v6.0.4.5?
Click to expand...
Click to collapse
no. boot into s/w mode and flash kdz. there are plenty of guides. if your pc cant detect your phone while it's in s/w mode, then reinstall drivers
Manholas said:
The problem is that the Phone was locked into CWM recovery. And I have no way to recognize the phone on PC. Is there any way to unlock the CWM recovery v6.0.4.5?
Click to expand...
Click to collapse
As you stated in your first post...
Manholas said:
I have root and unlocked bootloader. I did an update of lg and thereafter blocked, do not know if this was the problem.
Click to expand...
Click to collapse
It has been stated time and time again that your must NEVER carry out a vendor OTA on a rooted or modified device. It causes a problem 90% of the time as the OTA has no flexibility to deal with something it isn't expecting to find - so you get exactly what you have.
Just be thankful that it is almost impossible to hard-brick our device or you really would have a paperweight. Instead you just need to search and read a little to get it back up and running.
Flying_Bear said:
no. boot into s/w mode and flash kdz. there are plenty of guides. if your pc cant detect your phone while it's in s/w mode, then reinstall drivers
Click to expand...
Click to collapse
If you turn on the mobile it goes into CWM recovery. The problem is that the Phone was locked into CWM recovery. And I have no way to recognize the phone on PC. Is there any way to unlock the CWM recovery v6.0.4.5?
SimonTS said:
As you stated in your first post...
It has been stated time and time again that your must NEVER carry out a vendor OTA on a rooted or modified device. It causes a problem 90% of the time as the OTA has no flexibility to deal with something it isn't expecting to find - so you get exactly what you have.
Just be thankful that it is almost impossible to hard-brick our device or you really would have a paperweight. Instead you just need to search and read a little to get it back up and running.
Click to expand...
Click to collapse
Ok, thanks for the warning was a real oversight. But, .. and help. I'm just locked into CWM recovery and I can not enter the phone otherwise. thanks
Flying_Bear said:
no. boot into s/w mode and flash kdz. there are plenty of guides. if your pc cant detect your phone while it's in s/w mode, then reinstall drivers
Click to expand...
Click to collapse
Manholas said:
Ok, thanks for the warning was a real oversight. But, .. and help. I'm just locked into CWM recovery and I can not enter the phone otherwise. thanks
Click to expand...
Click to collapse
As @Flying_Bear has already said to you...
Manholas said:
Ok, thanks for the warning was a real oversight. But, .. and help. I'm just locked into CWM recovery and I can not enter the phone otherwise. thanks
Click to expand...
Click to collapse
You need to get your PC to recognise the phone, thats the first step in this repair (unless the usb port is broken, there's no reason why it wont recognise, whats your OS and version, usb 2 or 3?)
why not put cm10.1 on a microsd and flash it from there?
JoinTheRealms said:
You need to get your PC to recognise the phone, thats the first step in this repair (unless the usb port is broken, there's no reason why it wont recognise, whats your OS and version, usb 2 or 3?)
why not put cm10.1 on a microsd and flash it from there?
Click to expand...
Click to collapse
it still won't work, after upgrading it ota while having custom recovery installed, a person will be locked to recovery for some reason (atleast other people were). the only way to fix it that i know of is to reflash a kdz
Manholas said:
If you turn on the mobile it goes into CWM recovery. The problem is that the Phone was locked into CWM recovery. And I have no way to recognize the phone on PC. Is there any way to unlock the CWM recovery v6.0.4.5?
Click to expand...
Click to collapse
cmon, pay some attention you don't need to turn on the phone, or boot into the system itself to boot into s/w mode. now, there are tons (like 3 or 4 guides, plus many other topics opened by people with exact same problem like you) threads that tell you what to do (hint: figure out how to boot into s/w mode), so i'll let you search around for the guide.
I suggest using this method: http://forum.xda-developers.com/showthread.php?t=2682146
It's easier, faster and safer than flashing a .kdz file. (Plus, it tells you how to get into the s/w upgrade mode!)
Greetings from my Nexus 7 FHD!
balloon27 said:
I suggest using this method: http://forum.xda-developers.com/showthread.php?t=2682146
It's easier, faster and safer than flashing a .kdz file. (Plus, it tells you how to get into the s/w upgrade mode!)
Greetings from my Nexus 7 FHD!
Click to expand...
Click to collapse
I think this method also flashes a kdz, but does it automatically for you. But yeah, this one is easier than manually flashing. Thanks for posting it
Also, thiy method will format internal sd card. My suggestion is to do a data/system format from cwm before you go in to flashing a kdz, either manually or automatically, so you don't end up with formatted internal sd card
A big thanks to SimonTS, JoinTheRealms, Flying_Bear and balloon27. This is a fantastic forum and you guys are spectacular. Due to professional reasons only going back to the forum after seven days, I go to the sea and I'm without net. Got this getaway just to thank you for the care provided, the mobile phone is the same and will just touch it after a week. Once again, thank you very much.
I just make the process advised by balloon27 (http://forum.xda-developers.com/show....php?t=2682146). I have my 4X hd back .... yupi, yupi, yupi, yupi, yupi, ..... you guys are just the greatest. Once again a big thank you all of you. The 4X HD is working like a charm, a thank-you to the forum.