Database Develop

[Q] [CWM Problem] can't load cache

Ok so i tried flashing Epic got into a bootloop...so went to stock KF1...ODINed the Cognition kernel with CWM...flashed Fasty II V2.0 onto it...The ROM booted up just fine!
Then I went to Market to Download TiBu..but got a error message saying "Device doesn't have sufficient space blah blah" ...I know this..just need to wipe cache partition and am back up running...but when I boot into Recovery...I get this message:
E: can't open /cache/recovery/command
E: can't open /cache/recovery/log
E: can't open /cache/recovery/log
E: can't open /cache/recovery/last_log
E: can't open /cache/recovery/last_log
And every time I try to wipe cache partition..it just skips the wipe and gives the above error again
Shot a PM to LostLogic...till then anyone else who knows the solution to the problem please help me
How do I remove these errors?

Mount cache in cwm before wipe?
Sent from my MB860

Pirateghost said:
Mount cache in cwm before wipe?
Sent from my MB860
Click to expand...
Click to collapse
It gave Error can't mount cache...
Anyways I fixed this by :
1) ODINed back to Stock KF1
2) ODINed the Stock KH3 tar file onto it
3) ODINed boog's kernel
4) Installed Fasty II V2.0 using CWM 4.0
Now everything seems to be fine again.
No errors while going into Recovery!

[Q] need HELP ~ dead p990 ~

i installed CUSTOM Kernel
now the phone is stoked
won't boot (stoc on lg logo / and after boot in recovery )
and when you turn on your phone now automatically goes into recovery with the following errors:
E:Can't mount /cache/recovery/command
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/command
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
won't boot in s/w update ??
any help
THX

Can you get into CWM with power + volume down?

LarsPT said:
Can you get into CWM with power + volume down?
Click to expand...
Click to collapse
yes but into recovery with the following errors:
E:Can't mount /cache/recovery/command
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/command
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
Can't mount /system
Can't mount / emmc
Can't mount /data

Do you think it would be possible to plug the phone into your PC and reflashing recovery?
EDIT: Also, have you explored NVFlash?
http://forum.cyanogenmod.com/topic/32319-optimus-2x-stuck-on-lg-logo/

yes but i get this error
and i can't set the port

This?
http://thehowto.wikidot.com/lg-optimus-2x
-> Restore your dead/semi-dead LG O2X

this is the error

Have you done a backup with cwm before?
Sent from my LG-P990 using xda premium

iExitus said:
Have you done a backup with cwm before?
Sent from my LG-P990 using xda premium
Click to expand...
Click to collapse
YES - i can restore it
but when i reboot - i am back to recovery

Have you tried NVFlash?

Datasafe Disaster via NVFlash
hi, take a look in Optimus 2x Android Development. There is a thread written by Rusty called "DataSafe Disaster via NVFlash". It install a full clean MCW recovery, then you restore your backup.
Also you can use SmartFlash.

Scougar said:
Have you tried NVFlash?
Click to expand...
Click to collapse
on NVFlash -

presto_92_ said:
hi, take a look in Optimus 2x Android Development. There is a thread written by Rusty called "DataSafe Disaster via NVFlash". It install a full clean MCW recovery, then you restore your backup.
Also you can use SmartFlash.
Click to expand...
Click to collapse
no.. still nothing .. it boot in CWM again again and again

final - after HARD reset / format all -emmc / data / cache / system - was corrupted / installed BIN_LGP990AT-01-V10c-226-01-FEB-26-2011+0
but when tried to restore backup -> same prob .
remaining on stock for the moment

Thx all for the support / help

Have you tried smartflash?

That means you got it working?? That's great man, happy for you I hope you'll be back into flashing ROMs again in the future

Have you found something?
I got the same problem when flashing custom kernel.
Have tried NVFlash, smartflash tool and I'm out of ideas.

Can't mount errors

Hi guys,
I've tried to flash a new rom and now my phone doesnt start. When i power on the LG logo displays and i automatically enter the clockworkmod menü with this message:
ClockworkMod Recovery v5.0.2.0
E: Cant mount /cache/recovery/command
E: Cant mount /cache/recovery/log
E: Cant open /cache/recovery/log
E: Cant mount /cache/recovery/last_log
E: Cant open /cache/recovery/last_log
I cant even get into the recovery mode.
Is there anything i can do? Ive tried to wipe the cache and everything a few times but had no success!
I hope you can help me!
Edit: I have tried the instructions from here: http://forum.xda-developers.com/showthread.php?t=1007825
And i got this error message at the end: http://s1.directupload.net/file/d/2833/czj32463_jpg.htm
Is my phone Dead? :-(
Edit Nr.2: Ok my Optimus got a second chance XD
I just changed the usb port. Used the fron one before. Its better to use one on the back side of the computer. The nvflash was sucessull. Startet Smartflash and flashed the official 20l.
Now everything is fine. Puh i realy thought this was the end XD

Problem with kernel (2.6.32.61 and 2.6.32.60)

My goal was to install the ROM JB-4.1.2.
I've rooted my phone with flashtool, uncloked the bootloader also with flashtool and since then everything went great.Next step which wasn't hard at all was to flash the kernel via flashtool and it also happened with great result.The problem appeared when I was turning phone on, the system haven't turned up and my phone had showed only CWM Recovery.I knew that something went wrong but I made full wipe, cache and dalvik cache and installed JB-4.1.2. The CWM has said that system has been installed but when I've tried to boot phone JB didn't show up; again there was only CWM.
I've tried few times the procedure ( installing stock 2.1 android from Update Service, rooting phone with Flashtool, and flashing the kernel) but I'm facing the same problem with CWM.
Maybe I did something wrong, but don't know exactly what; or maybe my phone is not suitable for kernel?
I'm waiting for help!

Did you format the partitions before flashing the rom?

Yes, I did and nothing has changed.I again saw a screen with CWM and under options to choose at CWM I had a message from CWM like that:
E:Can't open /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't open /cache/recovery/last_log
E:Can't open /cache/recovery/last_log

Can anybody help with that odd problem?

[Q] Completely stumped - Bricked phone? (Odin fails to flash, CWM showing error)

Hi everyone!
I have a Galaxy S3 4G, I9305, and I have no idea what's happened to it. To make it short and sweet:
I can boot into Odin, it has triggered the counter.
To be exact it says:
HTML:
ODIN MODE
PRODUCT NAME: GT-I9305
CUSTOM BINARY DOWNLOAD: Yes (3 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
I tried to flash a new CWM tar-file, as well as TWRP and a Sammy-ROM (can't remember which one), everyone gives it a FAIL in Odin. The program itself shows "Added!" when I connect my phone, so it's something. Still, it fails me on the tar-files I've tried, no specific reason, just a fail.
When I open CWM, I'm greeted with these messages:
HTML:
CWM-based Recovery v5.5.0.4 : : CF-v1.5
E: Can't open /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't open /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
These messages will come up every time I enter an option like advanced, mount etc. If I try to select "install zip from sdcard" I get "Can't mount /sdcard/", and if I try to install zip from internal sdcard, the phone reboots.
If I try to wipe the phone, it says "formatting /data..." for a few seconds, before it reboots.
Is there any hope at all for this phone, or is it completely bricked? Could it be hardware related?
Thanks to everyone replying!

Try to flash latest version of TWRP and format everything again.

Thanks for your reply!
As I stated in the post, everything I flash gives me an error - TWRP as well
Anything else I can do?