i am trying to unlock this freak that i got from a relative from japan to work with any sim. i have downloaded diamond unlocker by olipro which is a three step-by-step process. so there, everything all set. but i cannot get to flash hardspl! tried all versions of it, signed, unsigned, developers edition, even jockyw's mfg spl. but none of them worked. unable to start the process because i cannot even do the first step which is the hardspl! i've here for a while and played with many htc devices but this is the first time i've encountered something like this. even tried flashing by bootloader, via activesync, internal storage, all possible methods i can think of, but to no avail. all just end up stuck at 0% and nothing happens until an error message comes up.
is there someone out there who had the same issue before and found a solution to this?
seems like it is nearly impossible to unlock this.
the phone is in japanese language, and the annoying "usim nag screen" keeps popping up! really frustrating! someone pls help!
here are details:
DIAM100 64M
SPL-1.73.0000
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
hope someone can help!
thanks in advance!
i am not even sure if one those paid unlock via imei process floating over the web will work on this.
Related
hi all
sorry for my english,
I have a HTC Diamond Operator ORANGE, I flashed with the official ROM and I sim unlocked it and since it works flawlessly.
except yesterday when I contact a person with such, it was closed at once and since it does not open but now I have to tweak a little open but I do see lines everywhere in green or red and sometimes a few points across, not a permanent screen always different so I thought that my screen is a grill or any time by removing the battery and leaving the CPP 's Opens and I could see the screen HTC Diamond and the home screen of Windows Mobile but after it freezes over.
while searching on your wonderful forum I found a tutorial and I tried handling but no sign of the fact I had access to the BootLoader flash but nothing impossible (i can't flash my htc)
sometimes I see a gray screen sometimes a black screen with dots sometimes vibrates every 30sec, frankly I do not know what to do
in bootloader i see this informations
security unlocked
DIAM100 MFG 64M
SPL-1.40.OLINEX
MicroP-Diam (led) V11
PSOC-DIAM STAGE_PVT v0*30
usb
but i can't terminate the flash, i have error 270 every time, I'm desperate, I do not know what to do he shows no sign of life and I can not access the internal memory to flash memory or access usb with activsync
Once again I am sorry for my English is so bad (because I have not found a solution in the French forum)
Thank you for help.
try flashing hardspl 1.24 see if that will work mate.
Singelton said:
try flashing hardspl 1.24 see if that will work mate.
Click to expand...
Click to collapse
...
go into Bootloader mode (reset and volume down) the connect to your PC via USB and try flashing a ROM (any).
Hi
I am having some problems when trying to upgrade my Orange SPV M700 to Hard SPL. I have followed the instructions given in "TrinityGuides.info" but I am not convinced the Hard SPL has actually worked okay. This is what happens:
1) I follow the initial instructions (run ROMUpdateUtility.exe) and click on the various screens ("I understand" "I completed") etc
2) I get to the point where the screen says "You are now ready to update your ROM image. This operation takes approximately 10 minutes"
3) I then click on "Next", the progress bar screen appears and I get the message on my SPV about running programs - I select 'yes' on the SPV.
4) Immediately I hear the Windows XP 'dum-dum' noise letting me know that a USB device has been disconnected. Also my ActiveSync is gone. I have not done anything to cause this though - the connection just goes down.
5) I then get a message telling me that the device is not connected and I have to exit the Hard SPL routine.
6) After reading the FAQs on TrinityGuides.info I re-run the "ROMUpdateUtility.exe" and get to the progress bar screen again. This time I see the grey screen on the SPV, with progress bar rapidly completing on both the SPV and my Desktop screen progress bar.
7) After literally a few seconds I get a screen telling me "Congratulations! Your ROM update is now complete etc"
Even though I see the congratulations message I am not convinced it has successfully installed Hard SPL.
Firstly, whereas the messages suggest it can take up to ten minutes to do the Hard SPL mine only takes a few seconds. Secondly, when I follow the TrinityGuides.info instructions on how to check the Hard SPL (by pressing power, camera and soft reset) I see this:
On my tri-colour screen this is displayed:
IPL-0.50
SPL 1.07.0000
The "TrinityGuides.info" instructions say that I should see this:
TRIN100
IPL-0.50 (your device may show IPL-1.00)
TRIN100 MFG
SPL-1.20.Olipro
I have tried both the "Hard SPL 1.20.Olipro" and "Des' Crash-Proof SPL" but nothing makes any difference to the display I see.
Can anyone help me? I am concerned that if I don't have the Hard SPL correctly installed I am going to risk bricking my SPV if I try upgrading the ROM, unlocking the SIM etc (which is what I want to do). Is there any other way I can tell whether Hard SPL is installed correctly?
Thanks in anticipation!
Spivvy
If i remember correctly hard SPL is a quick process, it's the ROM flashing that takes ten minutes or so. As to why it's not working i can't offer any help, sorry.
Hi DeeDee
Thanks for taking the time to reply. If, as you say, the Hard SPL does happen very quickly (in my case it seems a second or so) then that's good to hear as I was sure something had gone wrong.
Does anyone know if what I see on my tri-colour screen is correct? (i.e. IPL-0.50, SPL 1.07.0000) as before I proceed with any more drastic updates I'd like to make sure my SPV is protected against bricking.
Thanks again
Spivvy
UPDATE.....
I spotted this person's solution to what seemed to be a similar problem to mine:
http://forum.xda-developers.com/showthread.php?t=382246&highlight=ActiveSync+disconnects
I decided to try his fix. I used Olipro 1.20 Hard SPL.
The Hard SPL procedure did continue in a more convincing manner than my previous attempts, and the progress bar took a bit longer to complete, and I also received a message telling me that the operation was successful. I then did a soft reset and felt that maybe this time it had worked.
In a rare moment of feverish optimism I pressed the buttons to check the SPL version now on my Orange SPV (power, camera and soft reset). However, it is still telling me this:
IPL-0.50
SPL 1.07.0000
i.e. nothing seems to have changed. No sign of Olipro's SPL again.
In a word, I am flummoxed.
In two words, I am very flummoxed.
So, I am still putting out an appeal to you clever bods as to how I establish if I have a safe Hard SPL on my Orange SPV, or is it still looking a bit iffy (a technical term for "not very good")
Thanks
Spivvy
i am seeing the latter version with OliPro SPL, OK it's v1.2 but it's still different from yours.
Are you trying this on Vista or XP, personally i have always used XP for flashing. Whether that's going to make any difference i don't know.
I have a question along similar lines, although not identical. I'm completely unable to get from the triband screen to the bootloader screen. I'm trying to flash from my mini-SD card, but one it gets into that SSPL triband screen, it doesn't do a thing. I'm running vista on my PC, and can't seem to get any useful action trying to flash from there. Getting a little frustrated, cause I haven't even been able to SIM unlock my phone so far... Considering going the IMEI route, although that won't do anything for bootloader and upgrapding ROM later on... Any advice, or should I just use IMEI and go the easy way?
Dan
Hi DeeDee
I am using Windows XP, which I think is the preferred OS for this type of operation. Very puzzling.
Thanks
Spivvy
Hmmmm.....
It's looking like I am not going to resolve this problem as no one has posted an actual solution. I am not sure what to do now - my gut feeling is that my SPV M700 has not been Hard SPLed (based on what it displays as described earlier).
All I know is that I have followed the TrinityGuides instructions (and other postings with information about this type of thing) accurately. I have done it several times (using both Olipro 1.2 and Des Crash Proof) - but, for some inexplicable reason, my SPV M700 would appear to refuse to accept the Hard SPL.
As no one has said otherwise I have to assume that the tri-colour screen information I see in bootloader mode does mean that I have not successfully SPLed?
I can't understand why some (in fact most) people seem to get the Hard SPL flashing performed okay and yet mine refuses. I know from searching the postings that there are a few unlucky souls like me who have not been able to do it successfully.
If anyone does have any suggestions I really would be grateful to hear them, but for now it looks like I have drawn a blank. Pity.
I have run out of ideas - could it be some other program I have installed is interferring with the process? Is it my version of ActiveSync (4.5.0)? Is it some setting I have got on the SPV M700 that is preventing the Hard SPL? There surely has to be a reason why the Hard SPL is not working?
Still hanging on, hoping that some shaft of light might shine on my SPV M700 one day...
Ho hum...
Spivvy
Hey u are not alone, my Trinity ( Dopod D810 variant ) just simply refuses to flash to any hard spl as well, same problem as yours, i am using windows xp to flash so i doubt its the driver problem.
I found a solution to this problem though, i use SSPL to flash cooked rom to my device.
http://forum.xda-developers.com/showthread.php?t=293632
Just paste the .exe onto your trinity and open it using file explorer, it should enter bootloader with a "by des" behind the bootloader number, it should be safe to flash then.
I tested flashing WM 6.5 by savesaint, Finix's 6.1 with no problem
ADDons: Anyway the reason i suspect is because my one has been flashed with HTC P3600 rom, yes, by HTC without dopod branding, hence the problem
Hi there - thanks for that tip. I will try that link you suggested, and have a go with the file. I'll get back to let you know how it all went.
Many thanks for taking the time to post your suggestion.
Cheers
Spivvy
Hi
I thought I would report back as to the progress (or lack of it) regarding the failure to Hard SPL my Orange SPV-M700. There's not much to report I'm afraid, which may be largely to do with my lack of confidence etc.
I checked out the link suggested above by "/b/-TarD" (using SSPL to flash cooked rom to device - as described at:
http://forum.xda-developers.com/showthread.php?t=293632
However, when I read the various posts and experiences I still felt that this might not be the solution I was looking for. I am not very technical with all this ROM flashing but the original Hard SPL method seemed to me to give me some insurance against bricking my SPV-M700. This SSPL does not seem to leave you with a Hard SPLed device (I am not exactly sure what it does to be honest), and in fact some people seem to have had quite difficult problems after using it.
Call me a cowardly old geezer but I have backed away from trying the suggested solution at the moment (but still very grateful to user "/b/-TarD" for his suggestion).
My aim was to:
1) Get the basic HARD SPL on my SPV-M700 - Olipro or Des, but having followed all the Trinity guides faithfully, it would appear that my device doesn't wanna play ball with me — very frustrating.
2) Re-instate/upgrade the GPS radio thingy (which I believe you lose after you Hard SPL)
3) Unlock my Orange SPV-M700 so that I can use any SIM card in it
4) Then, finally, consider upgrading the ROM to one of the newer WM6 versions, or a better WM5 version.
But, at the moment, it would seem that it's not to be.
Ho hum....
I've recently gotten a Touch Diamond from Verizon and I'm looking to flash it. I have experience from flashing and cooking for my original Touch, but I've found this Diamond to be much more stubborn/fickle.
I'm interested in flashing a new Bootloader, Radio, and ROM on to the phone because the default install is disappointing (resource usage). I've all over this site, google, and modmydiamond.info and haven't been able to resolve my issue, so I'm looking for additional help by posting.
When trying to load a bootloader (Hard-SPL 1.40 Olinex SIGNED, and the Jockyw2001 Hard-SPLs), my phone will prompt me, saying something is trying to run on my phone, I tell it to allow it, and the spinning color wheel comes up then freezes after a short amount of time. The installer on my computer will eventually time out. I restart the phone and it's good to go. I guess I'd like to start there, I think if I can get a Hard-SPL loaded I should be able to do the rest without much issue. Current bootloader information reads:
Security Unlocked
DIAM400
SPL-0.58.0000
MicroP-Diam (LED) v81
PSOC-Diam STAGE_EVT_v20
Serial
Any help is appreciated, thank you.
I've done some more digging and trying and, I've obviously come across this thread in this forum, http://forum.xda-developers.com/showthread.php?t=544872. When trying to lock or unlock my phone using the links provided in that thread I get "Invalid Model ID".
Edit: Just realize it's not intended to work on Verizon phones... Any help is appreciated.
God I cant find a solution for this either
Did you try the HARD RESET and after the HARD RESET not letting phone load, instead pressing POWER/DOWN to go into bootloader?
Uhm... Is it Sprint? or Verizon?
If it's Sprint, let it reboot and install .NET CF 3.5 before launching Diamond Unlocker.exe
If it's Verizon, try using the SSPL-manual.exe <-- it's posted everywhere.
Good luck!
That doesn't work
sspl manual just gets you to the point where you realize that the hardspl doesn't work on verizon diamonds... wrong model #. us VZ users could really use a new cellphone company that doesn't cut the specs of a great phone down to that of a Motorola VU204... stupid big red...
hi to all.
My problem here:
Every Rom i test, become unusable in a while.
My diamond was bricked few days ago, and i received a new one by my phisical and logical damage insurance.
I'm not a noob (but not a pro )
I've always followed instruction for rom changing. hspl, radio and rom.
I was trying to test several roms, (i'm italian, i've tryed Lovers 6.5, but was slow, so i turned back to 6.1 roms).
I've tryed Kimera, and lot of italian roms. Every time that i begin to customize them (by installations of Oxios Memory, cleartemp, google maps, restore from pimbackup, changing tf3d background, facebook linking my contacts etc) every rom stuck, become slow, and for every operation take more than a minute. Many application shortcut become unavailable, and when it is impossible to reach the reset application (different application from any roms, same problem) and attempt manual reset (soft reset) it performs HARD RESET!!!
Sometimes also performing hard reset, installation batch says "installation error", or error occourred while attempting to install (application name).
First time i was thinking about a rom problem, (strange because many other users doesn't see this problem) so i've changed to another, same problem, another rom same problem, and so on.
So i try to change hspl, from 1.93 to 1.40, same things, several tryes, same problem, so i now turn to hspl 1.34...
_________________
Edit: Hspl 1.34, 1.37 (signed or not), 1.38 and 1.93 show me (in bootloader, or three-colored screen) the same message:
In the red zone
Code:
DIAM100 MFG 64M
SPL-1.40.OlinNex
MicroP-Diam (LED) v11
In the green zone
Code:
PSOC-Diam STAGE_PVT v0x32
Is this situation normal?
_________________
Now i'm testing on 1.34 hspl. If it shows another problem?
Do you think about an hardware error on diamond?
How can i solve/fix this?
Edit: Testing in 1.34 give same problem.
Any Ideas?
Please any help needed, Thanks in advance for patient in reading my bad and ugly english...
SOLVED:
Ruu i was using for Hspl flashing was not correct.
I've tryed another one and it worked.
Now on hspl 1.93 Olinex (now visible on bootloader screen)
Roms don't crash anymore (until now XD)
Thanks for attention, problem solved, now can close this thread
i am trying to unlock this freak that i got from a relative from japan to work with any sim. i have downloaded diamond unlocker by olipro which is a three step-by-step process. so there, everything all set. but i cannot get to flash hardspl! tried all versions of it, signed, unsigned, developers edition, even jockyw's mfg spl. but none of them worked. unable to start the process because i cannot even do the first step which is the hardspl! i've here for a while and played with many htc devices but this is the first time i've encountered something like this. even tried flashing by bootloader, via activesync, internal storage, all possible methods i can think of, but to no avail. all just end up stuck at 0% and nothing happens until an error message comes up.
is there someone out there who had the same issue before and found a solution to this?
seems like it is nearly impossible to unlock this.
the phone is in japanese language, and the annoying "usim nag screen" keeps popping up! really frustrating! someone pls help!
here are details:
DIAM100 64M
SPL-1.73.0000
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
hope someone can help!
thanks in advance!
i am not even sure if one those paid unlock via imei process floating over the web will work on this.
Please post in the appropriate sections. Thanks! Thread moved.
Sent from my Galaxy Nexus using Tapatalk 2