Database Develop

tablet won't start after installing custom rom

Hi, I have a rooted galaxy tab. I recently just installed a custom rom and after, it doesn't boot anymore? It only stucks at the boot screen. May I know what's the issue here? Is it a brick or something? Any helps appreciated. Tks!

it sounds like a soft brick, which isn't too bad at all Just switch your tab over to Download Mode and then flash another ROM that is confirmed working on your device.
A hard brick would be if your tab didn't power on in any way at all no matter what, and that would be pretty bad :/

Hi, tks for ur reply! Do u mind telling me where to download those roms? Tks once again!
Sent from my HTC Legend using XDA App

bryanqjx said:
Hi, tks for ur reply! Do u mind telling me where to download those roms? Tks once again!
Sent from my HTC Legend using XDA App
Click to expand...
Click to collapse
yea sure, but what Tab do you have? For example, I have a Samsung Galaxy Tab 7 P1000 GSM (T-Mobile)

espionage724 said:
yea sure, but what Tab do you have? For example, I have a Samsung Galaxy Tab 7 P1000 GSM (T-Mobile)
Click to expand...
Click to collapse
Yah, mine is the galaxy tab 7 P1000 as well. But mine is not from the US. It's from Singapore.
Sent from my HTC Legend using XDA App

And I wanna gingerbread rom.
Sent from my HTC Legend using XDA App

espionage724 said:
yea sure, but what Tab do you have? For example, I have a Samsung Galaxy Tab 7 P1000 GSM (T-Mobile)
Click to expand...
Click to collapse
Hi! I managed to get my rom on samfirmware.com and even flashed it via odin. But one thing, it managed to go the boot screen but then it doesn't move at the "samsung" glowing screen after that. Did I do anything wrong?

Your best bet will be to restock according to Overcome method.
Find Overcome thread in dev forum.
Sent from my GT-P1000 using XDA

priyana said:
Your best bet will be to restock according to Overcome method.
Find Overcome thread in dev forum.
Sent from my GT-P1000 using XDA
Click to expand...
Click to collapse
K. I also came across this roto JME pre-rooted firmware v4. Will this work as well?
Sent from my HTC Legend using XDA App

You need dbdata.rfs
bryanqjx said:
Hi! I managed to get my rom on samfirmware.com and even flashed it via odin. But one thing, it managed to go the boot screen but then it doesn't move at the "samsung" glowing screen after that. Did I do anything wrong?
Click to expand...
Click to collapse
You may have a corrupted /dbdata. If that's true, no matter how many new ROMs or firmwares you install, it won't help you.
This should take care of your problem:
http://forum.xda-developers.com/showpost.php?p=23348040&postcount=121

yappoe said:
You may have a corrupted /dbdata. If that's true, no matter how many new ROMs or firmwares you install, it won't help you.
This should take care of your problem:
http://forum.xda-developers.com/showpost.php?p=23348040&postcount=121
Click to expand...
Click to collapse
I tried using the dbdata before. But it still doesn't work.
Sent from my HTC Legend using XDA

I have the same problem before when i was flsshing back to the original rom. But i set my tab to download mode and flash it into a new rom then everything is settle. Btw, am using OC 4.1.0 rom running on 2.3.6! Try it.
Sent from my GT-P1000 using xda premium

priyana said:
Your best bet will be to restock according to Overcome method.
Find Overcome thread in dev forum.
Sent from my GT-P1000 using XDA
Click to expand...
Click to collapse
Hi! Tks for your advice. I just read through the restocking steps on the teamovercome.net. But I've got a question. Is it compulsory to actually install the overcome kernel and rom?

Izachii said:
I have the same problem before when i was flsshing back to the original rom. But i set my tab to download mode and flash it into a new rom then everything is settle. Btw, am using OC 4.1.0 rom running on 2.3.6! Try it.
Sent from my GT-P1000 using xda premium
Click to expand...
Click to collapse
Did you flash the overcome rom?

bryanqjx said:
Hi! Tks for your advice. I just read through the restocking steps on the teamovercome.net. But I've got a question. Is it compulsory to actually install the overcome kernel and rom?
Click to expand...
Click to collapse
I installed overcome kernel with many other rom before moving to redpill (because of bluetooth keyboard compatibility). It works great with most of rom 2.3.3 and 2.3.6 base. Don't hesitate to try the kernel with other rom.
Btw, did you try pushing new pit file through odin?

yappoe said:
I installed overcome kernel with many other rom before moving to redpill (because of bluetooth keyboard compatibility). It works great with most of rom 2.3.3 and 2.3.6 base. Don't hesitate to try the kernel with other rom.
Btw, did you try pushing new pit file through odin?
Click to expand...
Click to collapse
I haven't tried this process yet cause I am curious whether if its necessary to flash the kernel and the rom. But since its good, I will try it later! Tks btw.
Sent from my HTC Legend using XDA

[Q] need help,browser not working

hi guys
i have re-stock GB 2.3.3 on my tab p1000 with kernel 3.3.1
everything is working cool and smooth but there is a problem internet is working on my tab but browsers doesnt work at all(any browser)
what should i do?

What is that kernel 3.3.1
Where did you get that info from.
Sent from my GT-P1000 using xda app-developers app

priyana said:
What is that kernel 3.3.1
Where did you get that info from.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
i found it while i was searching for kernel 4.0 but they suggested to use this.
somewhere from xda only
is it due to that?

Maybe, maybe not.
Just some unclear naming.
Currently all mainstream android should be using Linux kernel 2.6 and some now 3.0
The naming of kernel 3.3.1 and 4.0 must be a proprietary naming that is arbitrary chosen my the author.
Were you looking for overcome kernel 4.0 ?
If so, maybe you want to redo everything based on overcome guide to ensure 100% working good rom?
Go to overcome site
Http://www.teamovercome.net
Read the guide,
Missing pictures can be seen here.
http://forum.xda-developers.com/showthread.php?p=20974872
Follow the picture step by step.
Basically to restock:
Download GB-stock-safe-v5.zip, unzip it and and flash with ODIN according to the guide.
Stop there and you will have Gingerbread JQ1
You can continue with the rest, and you will get Overcome 4.1 and you won't regret.
From there you can then try AOKP or CM9, all requires you to have Overcome Kernel with its CWM recovery to flash.
Links are easy to find in their individual thread.
Sent from my GT-P1000 using xda app-developers app

for some reason i am not able to download from that site
no where else also i could find it
do u knw any other place to download it?

Is it because if my bad copy and paste?
http://www.teamovercome.net
Sent from my GT-P1000 using xda app-developers app

priyana said:
Is it because if my bad copy and paste?
http://www.teamovercome.net
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
no bro
the thing is that i can not download from those links due to some unknown reason
it starts downloading without any size n goes on and on

sinahidden said:
no bro
the thing is that i can not download from those links due to some unknown reason
it starts downloading without any size n goes on and on
Click to expand...
Click to collapse
you need another browser. When I download with safari (on Mac) I don't see file size, it just downloads the file.
Sent from my GT-P1000 using Tapatalk 2

sinahidden said:
no bro
the thing is that i can not download from those links due to some unknown reason
it starts downloading without any size n goes on and on
Click to expand...
Click to collapse
if you are just looking for the overcome kernel 4.0, you can download this, flash it via odin:
http://forum.xda-developers.com/attachment.php?attachmentid=1151095&d=1340489289
but before flashing the above, please MAKE SURE that you are looking for the overcome kernel 4.0: Your device I assume is p1000, for GSM.

How do I fully root the Note?

Hey guys, Recently my dad got a Galaxy Note (N7000) and he has been complaining about The Note 2 getting jelly bean and stuff.
I already rooted it for him with Superuser.
I want to install a custom rom for him but I read a lot of topics saying that theres a very high chance on bricking your device using CWM and stuff.
If anyone could post a step by step guide, That would be super-appreciated, Thank you in advance.
Phone info
-Android 4.0.4
Baseband - N7000DXLR1
Kernel - 3.0.15-N7000DXLR5-CL968032
Build Number - IMM76D.DXLR5

Hello, here's a link to a step by step. Follow it perfeclty, and u will not brick ur fone.
http://www.androidauthority.com/galaxy-note-gt-n7000-root-android-4-0-4-ics-xxlrg-102122/
Search for liquidsmooth rom and flash it. It's a great rom and very smooth as it's name.
{Helpful, thank me}
Sent from my GT-N7100 using xda premium

jgkhalil said:
Hello, here's a link to a step by step. Follow it perfeclty, and u will not brick ur fone.
http://www.androidauthority.com/galaxy-note-gt-n7000-root-android-4-0-4-ics-xxlrg-102122/
Search for liquidsmooth rom and flash it. It's a great rom and very smooth as it's name.
{Helpful, thank me}
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Thanks for the quick reply, question. Whats XXLRG firmware?

Xxlrg is related to german and liquidsmooth is based on dat firmware
Sent from my GT-N7000 using xda app-developers app

jgkhalil said:
Hello, here's a link to a step by step. Follow it perfeclty, and u will not brick ur fone.
http://www.androidauthority.com/galaxy-note-gt-n7000-root-android-4-0-4-ics-xxlrg-102122/
Search for liquidsmooth rom and flash it. It's a great rom and very smooth as it's name.
{Helpful, thank me}
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
He's already rooted and on stock kernel, if he tries to flash a ROM using above CWM.zip or does factory reset on it, he will brick his device.
Best advice is to go Here, download PhilZ-cwm6-DXLR5-OLB-2.7-signed.zip (that's the one that is compatible with his ROM) and put it on external SD card. From there, boot into recovery mode, and flash Philz kernel from external storage. (It's the only one that can be flashed from stock recovery). Then phone will be fully rooted with safe stock kernel and safe CWM recovery. Only then should any attempt be made to flash ROMs from recovery.
Re: CWM.zip READ THIS

Easiest for me is to flash ICS of your choice using Odin. Then flash speedmod-kernel-n7000-ics-k3-13-Odin.tar using Odin. Select PDA in Odin to use this file. Google it up. Double check that the file you get is for ICS N7000 and that it is the Odin version.
The end result will be a rooted ICS that you can safely wipe. It also has Clockworkmod installed. This allows you to flash custom JB roms. You may get a yellow triangle upon reboot. Just buy Triangle Away on Google Play store. Reset the counter using the app.

But flashing philz from stock doesn't result in triangle, raised counter and need for triangle away. Surely easier
Sent from my GT-N7000 using xda app-developers app

If he has to ask what is xxLRG, thr i wont even advice him to flash custom roms.
Sell the Note and get your father a Note2. Chances are, he will complain of so many things "not normal" once in custom rom, etc.
Sent from my GT-N7000 using xda app-developers app

praetorius said:
If he has to ask what is xxLRG, thr i wont even advice him to flash custom roms....
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Yeah you're right - Noob Alert!
Sent from my GT-N7000 using xda app-developers app

+1 bro
Sent from my GT-N7000 using xda app-developers app

Deathsongx3 said:
Hey guys, Recently my dad got a Galaxy Note (N7000) and he has been complaining about The Note 2 getting jelly bean and stuff.
I already rooted it for him with Superuser.
I want to install a custom rom for him but I read a lot of topics saying that theres a very high chance on bricking your device using CWM and stuff.
If anyone could post a step by step guide, That would be super-appreciated, Thank you in advance.
Phone info
-Android 4.0.4
Baseband - N7000DXLR1
Kernel - 3.0.15-N7000DXLR5-CL968032
Build Number - IMM76D.DXLR5
Click to expand...
Click to collapse
you read the stickies in forum section, search for dr ketans guide. All your info is already available
btw you cant root with super user alone....
Sent from my GT-N7000 using Tapatalk 2

Official ICS help

Hi guys, my friend has an OB and wants to upgrade to ICS, i've looked on the web and i've seen flashing with KDZ and others, can u link me or tell me how to flash the official firmware. Also if possible, can u give feedback on how smooth it works. Thnx. I personally own a samsung phone so im more familiar with ODIN. Are there any chances of bricking the OB if done the correct procedure? Thnx again.

If the phone is rooted it can easily be flash thru cwm
Sent from my LG-P970 using xda app-developers app

lei0418 said:
If the phone is rooted it can easily be flash thru cwm
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
No its stock gb rom :< he didnt want to root, he's all the offcial type lol unlike meh.

I think the official ics rom gives massive battery drain that's why we choose to install custom ics rom instead try browsing the general forum for the step by step guide of flashing of the ofc rom thru sft,hope i helped
Sent from my LG-P970 using xda app-developers app

You can find all your answers about flash and brick here and about ics here.
Please search a little before you ask a question.

Newbie

Hi everyone. Just bought new galaxy note basebrand N7000XXLRB, build number IMM76D.XXLRI, 11.july, v4.0.4and i want to root to start using custom ROM. Any clear guide? I found no thread related to my device.
Sent from my GT-N7000 using xda app-developers app

hoursenghong said:
Hi everyone. Just bought new galaxy note basebrand N7000XXLRB, build number IMM76D.XXLRI, 11.july, v4.0.4and i want to root to start using custom ROM. Any clear guide? I found no thread related to my device.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1329360
^^ Is a good place to start, I would say the easiest way would be to download philz kernel for your version (LRB) and flash it through the stock recovery, this will give you root and CWM and from there on the limits are endless.
or you can use philz ODIN version or even HydraCore ODIN version and flash them using ODIN (obviously ) but this will give you yellow triangle (easily removed with triangle away app)

Flash philz kernel, then use pc odin or mobile odin to flash your custom rom.
Anyway you can use the search functions to get more in deep information.
Sent from my GT-N7000 using xda app-developers app

feartheanonymity said:
http://forum.xda-developers.com/showthread.php?t=1329360
^^ Is a good place to start, I would say the easiest way would be to download philz kernel for your version (LRB) and flash it through the stock recovery, this will give you root and CWM and from there on the limits are endless.
or you can use philz ODIN version or even HydraCore ODIN version and flash them using ODIN (obviously ) but this will give you yellow triangle (easily removed with triangle away app)
Click to expand...
Click to collapse
too heavy for me, please give me an easy method(u recommend) include download link, and one more thing is i dont have credit card for mobile ODIN.

hoursenghong said:
Hi everyone. Just bought new galaxy note basebrand N7000XXLRB, build number IMM76D.XXLRI, 11.july, v4.0.4and i want to root to start using custom ROM. Any clear guide? I found no thread related to my device.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
-Download This
http://www.mediafire.com/?kesmwbjbnux4i1p
and copy to ext SD card
-reboot to recovery
-select install/update zip from ext SD
-choose zip (file you have copied)
-Flash
done
This s short procedure but though i recommend to read above said thread to get detail information.

Hey bro. I dont have ext sd card. Can i use it with my usb storage?
Sent from my GT-N7000 using xda app-developers app

no.. stock recovery only flashes from external storage.. use the exynos exploit app by chainfire to root .. then use mobile odin to install Philz or speedmod or hydracore.. then you are set to flash custom roms
its the 0.Root with apk procedure in the thread mentioned by Dr ketan

This is much harder than my old infuse 4g. M so confuse... Now u mean i need to root using exynos blabla then install file(mediafire link above) using odin? I dont have credit card for mobile odin, but i have pc odin.
Sent from my GT-N7000 using xda app-developers app

not the above link but you need to use tar.md5 file version of kernel.. as mobile odin wont recognize that,,
here link to MO by its Dev
http://forum.xda-developers.com/showthread.php?t=1347899
You can use pc odin but that will increase the counter and cause yellow triangle at boot

Rooted using exynos already. Installing MO and mobileODIN flashkernel N7000 already. Then what?
Sent from my GT-N7000 using xda app-developers app

?
What kernel did you flash using mo?

OP said if i install MO lite i need to install flashkernel N7000 v3.0.apk i didnt flash anything yet
Sent from my GT-N7000 using xda app-developers app

First install the mo kernel and then open mo again. Then flash the custom kernel of your choice.

Can u give me kernel link for my device?
Sent from my GT-N7000 using xda app-developers app

Got philz now... 2question:
1. If i want to install custom rom, what m gonna do? Do i need right one like " for XXLRI blabla"?
2. Where can i get stock 4.0.4 without root?
Sent from my GT-N7000 using xda app-developers app

hoursenghong said:
Got philz now... 2question:
1. If i want to install custom rom, what m gonna do? Do i need right one like " for XXLRI blabla"?
2. Where can i get stock 4.0.4 without root?
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
if u already have a rooted and philz installed...just download the custom RoM of ur choice in the Development sector and use the recovery to flash it.
and if u want stock 4.0.4 ..use this thread http://forum.xda-developers.com/showthread.php?t=1424997