Go here : http://forum.xda-developers.com/showthread.php?t=1797292
Justin has several options now.
i suppose i cant flash those gapps unless i want to totaly start over, right?
im already runnin liquid and all set up. and the directions say a total wipe and install rom.
93fuelslut said:
i suppose i cant flash those gapps unless i want to totaly start over, right?
im already runnin liquid and all set up. and the directions say a total wipe and install rom.
Click to expand...
Click to collapse
I think gapps are installed in /system so if you wipe system, cache, and dalvik, then reflash the ROM and the inverted gapps, I think that would do it without having to wipe out data.
Someone correct me if I'm wrong.
I might test this out later today if I have time.
Sent from my Droid 4 - LiquidSmooth
i think we are on a different page. im running liquid with the regular white gapps. iv got my rom all set up with themed holo apps (some).
but if i flash the inverted gapps like the directions say, wont i be starting complety over?
or is there a way to flash the inverted gapps to replace the regular gapps without starting all over?
Links are down? Where do I go?
Related
so im new to the android world please be gentle. i just got my nexus one today trying to get it rooted so that i can get the modacos desire rom up and running. so far using these instructions
http://theunlockr.com/2010/01/08/how-to-load-a-custom-rom-on-the-nexus-one/
ive gotten the phone to reboot with a padlock at the bottom, it will let me run torch so i assumed it was rooted. i put both nandroid folder and the sense ui rom zip files but when i try to put the phone into recovery mode it gives me the android dude and an exlamation mark. sorry if this is a common problem or i missed some simple instructions. thanks for any help.
Sounds like you did step I on that page, but might have missed step II completely and didn't flash the custom recovery rom.
Try here instead for a full tutorial on the exact steps needed to get to the Desire rom:
http://forum.xda-developers.com/showthread.php?t=636795
But you can skip the unlocking of the bootloader, as it seems you got that done.
amazing! thank you
hey ive tried a couple different methods but cant seem to get rid of this com.google.process.gapps message after i enter my google info. ive removed everything from my memory card. wiped a hundred times, flashed several diffent roms. it popped up first on the newest cyogen rom after installing a couple of programs, not sure which one did it. is there a way to manually clear the google info on the phone because it seems to be stored in there. thanks
So I'm assuming you already got recovery... Did you wipe data / cache / dalvik before flashing the ROM? Did you also flash Gapps? Give that a try. That should help.
yeah i wipe all the devlik/ cache along with regular wipe each time before a install. what is gapps?
GoogleApps.
Go to this link
http://forum.cyanogenmod.com/index....xus-one-v506-04152010/page__view__getnewpost?
Download Google Addon
Flash over cyan ROM.
thatg said:
yeah i wipe all the devlik/ cache along with regular wipe each time before a install. what is gapps?
Click to expand...
Click to collapse
cool that did it, back to cyogen, wish the desire rom was as fast as the cyogen. thanks for the help man!
if theres a desire status bar i want to install can i just flash the zip or do i have to back everything up do a wipe and install everything all over again?
Yes, you can flash themes over the ROM without wiping, as long as the theme is compatible with the ROM.
thatg said:
cool that did it, back to cyogen, wish the desire rom was as fast as the cyogen. thanks for the help man!
if theres a desire status bar i want to install can i just flash the zip or do i have to back everything up do a wipe and install everything all over again?
Click to expand...
Click to collapse
Hello all,
I'm running super E at the moment, really fast but no market.
I tried both BiffModGapps and gapps-mdpi-tiny-20100814-signed.
Is there another way to get the market onto my phone, or is there a special procedure for flashing gapps?
Thanks in advance.
outamoney said:
Hello all,
I'm running super E at the moment, really fast but no market.
I tried both BiffModGapps and gapps-mdpi-tiny-20100814-signed.
Is there another way to get the market onto my phone, or is there a special procedure for flashing gapps?
Thanks in advance.
Click to expand...
Click to collapse
BiffMod is a froyo rom and tiny are gapps or google addons for froyo only, super E is an eclair rom and i think gapps are included in the rom so you dont need to flashe them separately. do a wipe and flash it again or (if you are lazy) just wipe cache and dalvik and get the gapps here, put them on sdcard and flash from recovery of course...
Google Addon: ERE36B
http://forum.xda-developers.com/showthread.php?t=688262
etu_aty said:
BiffMod is a froyo rom and tiny are gapps or google addons for froyo only, super E is an eclair rom and i think gapps are included in the rom so you dont need to flashe them separately. do a wipe and flash it again or (if you are lazy) just wipe cache and dalvik and get the gapps here, put them on sdcard and flash from recovery of course...
Google Addon: ERE36B
http://forum.xda-developers.com/showthread.php?t=688262
Click to expand...
Click to collapse
Thank you sir.
From CM10.1 to CM10.
Won't that cause any problems? I want to flash back from CM10.1 nightly back to CM10 stable. Do I need to install gapps? If yes, which ones?
Thanks in advance. Ready to rise your thank meter
Sent from my GT-I9000 using xda premium
No that shouldn't cause any problems. The partitionlayout is the same, so i think it will be enough to wipe only data and delvik. If you want to get sure that you have a clean system, additional format system in mounts an storage. If you still have issues or fcs or something then do a new install with full wipe/factory reset.
And yes you have to flash gapps on top. Some say just behind the rom, other say first led phone boot after installation of the rom and then back in recover to flash the gapps. I did always flashed the gapps just behind.
And the gapps are different to 10.1...you can find and download them here:
http://goo.im/gapps in second line there should be the right ones.
I flash LenioV3-noGapps.
But do not work Quick Settings (tiles) in the status bar.
If you have someone that mistake?
And how can I solve this.
stety said:
I flash LinaroV3-noGapps.
But do not work Quick Settings (tiles) in the status bar.
If you have someone that mistake?
And how can I solve this.
Click to expand...
Click to collapse
yes, happened to me also...but got it work after this (im talking about cm10.1 without gapps, wich is same) : 1. flash rom 2. wipe everything 3. install gapps 4. wipe cache and dalvik cache 5. reboot
Nixoman said:
yes, happened to me also...but got it work after this (im talking about cm10.1 without gapps, wich is same) : 1. flash rom 2. wipe everything 3. install gapps 4. wipe cache and dalvik cache 5. reboot
Click to expand...
Click to collapse
If in the rom are Gapps, so quick settings works.
But I want a rom without Gapps.
stety said:
If in the rom are Gapps, so quick settings works.
But I want a rom without Gapps.
Click to expand...
Click to collapse
than ask developer of rom, i toght you had problem with gapps instalation
i think u should try reflash this rom with full wipe data/cache/system because im using this without gapps with not problem.its work perfectly but using alot of ram (sometime my free ram is < 1mb).
Received this phone a month ago, just got around to rooting it yesterday. Root with motochopper went fine. Unlocked the handset with motopocalypse, everything went fine. Installed latest CM10.2 nightly and everything ran fine, even restarted phone and it worked fine. I then realized I forgot to install Gapps, So i went to CWM and installed the Gapps through "install zip from sd card". Now phone will not progress past the bootloader unlocked warning screen. I can restart and put phone into recovery or fastboot no problem but I don't know where to go from here. I tried a factory reset and reinstallation of CM but to no success. I am a bit of a newb when it comes to external programs like RSD Lite and haven't used it. Is there something obvious I'm missing in my progress of trying to fix my phone?
clear cache and dalvik cache under advanced then restart.
if you still loop do the above steps plus data reinstall cm10.2.
if you still loop do all above steps but also format system under mounts be re-install.
if you loop after all that then try a different ROM.
PS what version of gapps did you use.
frog1982 said:
clear cache and dalvik cache under advanced then restart.
if you still loop do the above steps plus data reinstall cm10.2.
if you still loop do all above steps but also format system under mounts be re-install.
if you loop after all that then try a different ROM.
PS what version of gapps did you use.
Click to expand...
Click to collapse
i can't post outside links yet but on the wiki.cyanogen site in the Gapps section I used the 10.2 20130813 1f51b5cc6370c1f45dc951109b6ce6ed release. I will attempt those steps once i can find a legitimate charger in my house. Phone doesn't accept power unless its on and i need just a bit of juice to boot it up
frog1982 said:
clear cache and dalvik cache under advanced then restart.
if you still loop do the above steps plus data reinstall cm10.2.
if you still loop do all above steps but also format system under mounts be re-install.
if you loop after all that then try a different ROM.
PS what version of gapps did you use.
Click to expand...
Click to collapse
Here's the official name. Installed cm-10.2-2-130814-NIGHTLY-mb886.zip for the cm and gapps-jb-20130813-signed.zip for the GApps, both latest versions I believe
frog1982 said:
clear cache and dalvik cache under advanced then restart.
if you still loop do the above steps plus data reinstall cm10.2.
if you still loop do all above steps but also format system under mounts be re-install.
if you loop after all that then try a different ROM.
PS what version of gapps did you use.
Click to expand...
Click to collapse
none of the above steps worked unfortunately. Is there a set order of certain things to be mounted and unmounted in the mount section? Such as the system or sd card?
yodelyfish said:
none of the above steps worked unfortunately. Is there a set order of certain things to be mounted and unmounted in the mount section? Such as the system or sd card?
Click to expand...
Click to collapse
try changing the mount status of the cache
also are you getting any funny messages in cwm
PS are you flashing gapps before first boot up
frog1982 said:
try changing the mount status of the cache
also are you getting any funny messages in cwm
PS are you flashing gapps before first boot up
Click to expand...
Click to collapse
i got Cyanogen up and working. And no I was not flashing gaps Before first boot. i will try doing that before everything else
I got both GApps and cyanogenmod to install properly and the phone boots normally, but now I don't see any of the GApps actually present on the phone. Did I F somethin over again?
yodelyfish said:
I got both GApps and cyanogenmod to install properly and the phone boots normally, but now I don't see any of the GApps actually present on the phone. Did I F somethin over again?
Click to expand...
Click to collapse
did you flash gapps before flashing the ROM because the ROM flash will overwrite the gapps.
PS I suggest using zgapps http://forum.xda-developers.com/showthread.php?t=2240652 because they are stripped down which tends to prevent a lot of issues and if you want a 4.3 ROM try skeevydudes PAC ROM it is more stable plus has more features.
frog1982 said:
did you flash gapps before flashing the ROM because the ROM flash will overwrite the gapps.
PS I suggest using zgapps http://forum.xda-developers.com/showthread.php?t=2240652 because they are stripped down which tends to prevent a lot of issues and if you want a 4.3 ROM try skeevydudes PAC ROM it is more stable plus has more features.[/Q]
Awesome. Pac-Rom already looks better on review. I get to the dl page tho and have a monster list of choices. Which one do I go for?
Click to expand...
Click to collapse
frog1982 said:
did you flash gapps before flashing the ROM because the ROM flash will overwrite the gapps.
PS I suggest using zgapps http://forum.xda-developers.com/showthread.php?t=2240652 because they are stripped down which tends to prevent a lot of issues and if you want a 4.3 ROM try skeevydudes PAC ROM it is more stable plus has more features.
Click to expand...
Click to collapse
Thank you for all the help. PACROM is up and running swimmingly, all of the features are there and it is definitely better than CM by itself. Thanks again