I flash LenioV3-noGapps.
But do not work Quick Settings (tiles) in the status bar.
If you have someone that mistake?
And how can I solve this.
stety said:
I flash LinaroV3-noGapps.
But do not work Quick Settings (tiles) in the status bar.
If you have someone that mistake?
And how can I solve this.
Click to expand...
Click to collapse
yes, happened to me also...but got it work after this (im talking about cm10.1 without gapps, wich is same) : 1. flash rom 2. wipe everything 3. install gapps 4. wipe cache and dalvik cache 5. reboot
Nixoman said:
yes, happened to me also...but got it work after this (im talking about cm10.1 without gapps, wich is same) : 1. flash rom 2. wipe everything 3. install gapps 4. wipe cache and dalvik cache 5. reboot
Click to expand...
Click to collapse
If in the rom are Gapps, so quick settings works.
But I want a rom without Gapps.
stety said:
If in the rom are Gapps, so quick settings works.
But I want a rom without Gapps.
Click to expand...
Click to collapse
than ask developer of rom, i toght you had problem with gapps instalation
i think u should try reflash this rom with full wipe data/cache/system because im using this without gapps with not problem.its work perfectly but using alot of ram (sometime my free ram is < 1mb).
Related
or can i just dirty wipe and wipe dalvik cache and im good to go?
thanks
Jamal Ahmed said:
or can i just dirty wipe and wipe dalvik cache and im good to go?
thanks
Click to expand...
Click to collapse
Not sure about this particular case, but I'll tell you my approach is to *always* do a full wipe + format partitions and internal sdcard before flashing *any* ROM. This way I'm sure there's nothing old left (app data, config etc.). Using this approach I've been running many ROMs without most of the bugs users report (using XXLSA now), I think it's worth the time to reinstall and reconfig everything. If you don't need to keep old data and config:
1) Wipe data & cache
2) Wipe dalvik cache
3) Format /system & /preload
4) Format internal sdcard (make sure you save anything you need before)
5) Flash ROM
6) Wipe cache again
7) Wipe dalvik cache again
8) Reboot
(Not sure if 6 and 7 are needed, but I prefer to be a bit paranoid in this case.)
Jamal Ahmed said:
or can i just dirty wipe and wipe dalvik cache and im good to go?
thanks
Click to expand...
Click to collapse
I think it depends on which custom rom u r currently on & which one you are gonna flash..for ex: flashing Ultimate v5 XXLSA over Alliance v1 XXLS7 may not work..
dbolivar said:
Using this approach I've been running many ROMs without most of the bugs users report (using XXLSA now))
Click to expand...
Click to collapse
I agree with you. If you perform a full wipe before to install a new rom, the probabilities of occur in some rom's issue (like FC or just a "simple" weird lag) are low. Tested personally.
It always better/advised to perform a full wipe.
In the end, you could do a nandroid backup of your last used rom, wipe everything, install the new rom, and then try to restore the data partition only. If you get some errors or general issue, you can easily full wipe everything again, and reinstall the new rom again... at least, you tried
Jamal Ahmed said:
or can i just dirty wipe and wipe dalvik cache and im good to go?
thanks
Click to expand...
Click to collapse
What does the OP states? Flashing ROMs is STILL a dangerous business.
Read the OP for the ROM you are installing
Jamal Ahmed said:
or can i just dirty wipe and wipe dalvik cache and im good to go?
thanks
Click to expand...
Click to collapse
leaks always require full wipe for it to function properly.
Received this phone a month ago, just got around to rooting it yesterday. Root with motochopper went fine. Unlocked the handset with motopocalypse, everything went fine. Installed latest CM10.2 nightly and everything ran fine, even restarted phone and it worked fine. I then realized I forgot to install Gapps, So i went to CWM and installed the Gapps through "install zip from sd card". Now phone will not progress past the bootloader unlocked warning screen. I can restart and put phone into recovery or fastboot no problem but I don't know where to go from here. I tried a factory reset and reinstallation of CM but to no success. I am a bit of a newb when it comes to external programs like RSD Lite and haven't used it. Is there something obvious I'm missing in my progress of trying to fix my phone?
clear cache and dalvik cache under advanced then restart.
if you still loop do the above steps plus data reinstall cm10.2.
if you still loop do all above steps but also format system under mounts be re-install.
if you loop after all that then try a different ROM.
PS what version of gapps did you use.
frog1982 said:
clear cache and dalvik cache under advanced then restart.
if you still loop do the above steps plus data reinstall cm10.2.
if you still loop do all above steps but also format system under mounts be re-install.
if you loop after all that then try a different ROM.
PS what version of gapps did you use.
Click to expand...
Click to collapse
i can't post outside links yet but on the wiki.cyanogen site in the Gapps section I used the 10.2 20130813 1f51b5cc6370c1f45dc951109b6ce6ed release. I will attempt those steps once i can find a legitimate charger in my house. Phone doesn't accept power unless its on and i need just a bit of juice to boot it up
frog1982 said:
clear cache and dalvik cache under advanced then restart.
if you still loop do the above steps plus data reinstall cm10.2.
if you still loop do all above steps but also format system under mounts be re-install.
if you loop after all that then try a different ROM.
PS what version of gapps did you use.
Click to expand...
Click to collapse
Here's the official name. Installed cm-10.2-2-130814-NIGHTLY-mb886.zip for the cm and gapps-jb-20130813-signed.zip for the GApps, both latest versions I believe
frog1982 said:
clear cache and dalvik cache under advanced then restart.
if you still loop do the above steps plus data reinstall cm10.2.
if you still loop do all above steps but also format system under mounts be re-install.
if you loop after all that then try a different ROM.
PS what version of gapps did you use.
Click to expand...
Click to collapse
none of the above steps worked unfortunately. Is there a set order of certain things to be mounted and unmounted in the mount section? Such as the system or sd card?
yodelyfish said:
none of the above steps worked unfortunately. Is there a set order of certain things to be mounted and unmounted in the mount section? Such as the system or sd card?
Click to expand...
Click to collapse
try changing the mount status of the cache
also are you getting any funny messages in cwm
PS are you flashing gapps before first boot up
frog1982 said:
try changing the mount status of the cache
also are you getting any funny messages in cwm
PS are you flashing gapps before first boot up
Click to expand...
Click to collapse
i got Cyanogen up and working. And no I was not flashing gaps Before first boot. i will try doing that before everything else
I got both GApps and cyanogenmod to install properly and the phone boots normally, but now I don't see any of the GApps actually present on the phone. Did I F somethin over again?
yodelyfish said:
I got both GApps and cyanogenmod to install properly and the phone boots normally, but now I don't see any of the GApps actually present on the phone. Did I F somethin over again?
Click to expand...
Click to collapse
did you flash gapps before flashing the ROM because the ROM flash will overwrite the gapps.
PS I suggest using zgapps http://forum.xda-developers.com/showthread.php?t=2240652 because they are stripped down which tends to prevent a lot of issues and if you want a 4.3 ROM try skeevydudes PAC ROM it is more stable plus has more features.
frog1982 said:
did you flash gapps before flashing the ROM because the ROM flash will overwrite the gapps.
PS I suggest using zgapps http://forum.xda-developers.com/showthread.php?t=2240652 because they are stripped down which tends to prevent a lot of issues and if you want a 4.3 ROM try skeevydudes PAC ROM it is more stable plus has more features.[/Q]
Awesome. Pac-Rom already looks better on review. I get to the dl page tho and have a monster list of choices. Which one do I go for?
Click to expand...
Click to collapse
frog1982 said:
did you flash gapps before flashing the ROM because the ROM flash will overwrite the gapps.
PS I suggest using zgapps http://forum.xda-developers.com/showthread.php?t=2240652 because they are stripped down which tends to prevent a lot of issues and if you want a 4.3 ROM try skeevydudes PAC ROM it is more stable plus has more features.
Click to expand...
Click to collapse
Thank you for all the help. PACROM is up and running swimmingly, all of the features are there and it is definitely better than CM by itself. Thanks again
I recently started using the Miui 4.2.2 version by deepss1 , and I noticed that gapps wasn't there but had a chinese alternate play-store.
Will it be okay if I just flashed a normal 4.2.2 gapps zip for it instead?
Hey
Normal 4.2.2 gapps will be fine.
Make sure u boot once after flashing miui 4.2.2 and then flash gapps 4.2.2...
Sent from my Amazing Galaxy S III..!
tchindalia said:
Hey
Normal 4.2.2 gapps will be fine.
Make sure u boot once after flashing miui 4.2.2 and then flash gapps 4.2.2...
Sent from my Amazing Galaxy S III..!
Click to expand...
Click to collapse
Wow, that's it? thanks!
dandrake47 said:
Wow, that's it? thanks!
Click to expand...
Click to collapse
In CWM recovery: wipe all (data, cache, dalvik cache), install ZIP of Gapps for 4.2x and reboot.
Wiping cache might spare you a bootloop experience. It could work fine also without wiping but wiping can't do any harm
tetakpatak said:
In CWM recovery: wipe all (data, cache, dalvik cache), install ZIP of Gapps for 4.2x and reboot.
Wiping cache might spare you a bootloop experience. It could work fine also without wiping but wiping can't do any harm
Click to expand...
Click to collapse
I always do a full wipe before installing a new rom anyway
And as for Miui, it rocks! Not a day goes by without me checking for new updates
Same for me ,but with CM 10.2 :good::laugh::laugh:
dandrake47 said:
I
And as for Miui, it rocks! Not a day goes by without me checking for new updates
Click to expand...
Click to collapse
ROM's based on original firmware and CM 11 work fine. Doom/Zombie/etc kernels work fine.
But SlimKAT, any official 4.1 or 4.2, Vanir or any other ROM causes hot reboot when opening camera for second time.
First time everything is OK, I can use e.g. PAC ROM for several days, but if I close the camera and open it again (without rebooting) it causes hot reboot. Always.
But CM11 is rock stable so is any original 4.3 and higher.
Any help with that?
Thanx!
slimKAT weekly 5.6's camera works without any problems .bro.
Orangewanted said:
slimKAT weekly 5.6's camera works without any problems .bro.
Click to expand...
Click to collapse
Yes, I know. Once ...
If I start if again it causes hor reboot.
CM 11, stock 4.3/4.4 no problems ...
Z O X said:
Yes, I know. Once ...
If I start if again it causes hor reboot.
CM 11, stock 4.3/4.4 no problems ...
Click to expand...
Click to collapse
Have you done a fresh installation ?
In CWM perform wipe data/factory reset and in mounts and storage section format system.
In TWRP choose advanced in wipe section and wipe dalvik cache, cache, system and data.
or please check your gapps which may cause the problem.
always use the gapps from here http://forum.xda-developers.com/showthread.php?t=2397942
Orangewanted said:
Have you done a fresh installation ?
In CWM perform wipe data/factory reset and in mounts and storage section format system.
In TWRP choose advanced in wipe section and wipe dalvik cache, cache, system and data.
or please check your gapps which may cause the problem.
always use the gapps from here http://forum.xda-developers.com/showthread.php?t=2397942
Click to expand...
Click to collapse
Yes, always fresh.
Point is, even flashed TFT ver 4.1 and 4.2 have same issues. Only 4.3 and 4.4 work OK :-/
Those are the GAPPS I always use ... Don't know. I'll try replacing camera libraries with version that work and see how that goes ...
Hi what is the best way to uninstall a custom rom to clean completely my phone?
I installed Paranoid Rom and Gapps + werewolf kernel too
How can I clean completely my P880 to Install a new Custom rom?
Pinuccio67 said:
Hi what is the best way to uninstall a custom rom to clean completely my phone?
I installed Paranoid Rom and Gapps + werewolf kernel too
How can I clean completely my P880 to Install a new Custom rom?
Click to expand...
Click to collapse
You kidding right?... How do you install custom rom if you don't know how to wipe one.
OK, procedure is, enter recovery wipe system, data, cache and dalvik cache and then install desired rom, gapps and kernel if you want( for ex. if you install cm11 from demetris you don't need to flash other kernel because built in kernel is great) and wipe cache and dalvik cache and you have new custom rom on your phone...reboot, wait until phone is fully booted (leave him alone for 5 min) and then make another reboot and you are good to go...
xperia u20i said:
You kidding right?... How do you install custom rom if you don't know how to wipe one.
OK, procedure is, enter recovery wipe system, data, cache and dalvik cache and then install desired rom, gapps and kernel if you want( for ex. if you install cm11 from demetris you don't need to flash other kernel because built in kernel is great) and wipe cache and dalvik cache and you have new custom rom on your phone...reboot, wait until phone is fully booted (leave him alone for 5 min) and then make another reboot and you are good to go...
Click to expand...
Click to collapse
I'm not kidding .
I just want to bu sure and don't brick my phone. thanks :laugh: