I recently started using the Miui 4.2.2 version by deepss1 , and I noticed that gapps wasn't there but had a chinese alternate play-store.
Will it be okay if I just flashed a normal 4.2.2 gapps zip for it instead?
Hey
Normal 4.2.2 gapps will be fine.
Make sure u boot once after flashing miui 4.2.2 and then flash gapps 4.2.2...
Sent from my Amazing Galaxy S III..!
tchindalia said:
Hey
Normal 4.2.2 gapps will be fine.
Make sure u boot once after flashing miui 4.2.2 and then flash gapps 4.2.2...
Sent from my Amazing Galaxy S III..!
Click to expand...
Click to collapse
Wow, that's it? thanks!
dandrake47 said:
Wow, that's it? thanks!
Click to expand...
Click to collapse
In CWM recovery: wipe all (data, cache, dalvik cache), install ZIP of Gapps for 4.2x and reboot.
Wiping cache might spare you a bootloop experience. It could work fine also without wiping but wiping can't do any harm
tetakpatak said:
In CWM recovery: wipe all (data, cache, dalvik cache), install ZIP of Gapps for 4.2x and reboot.
Wiping cache might spare you a bootloop experience. It could work fine also without wiping but wiping can't do any harm
Click to expand...
Click to collapse
I always do a full wipe before installing a new rom anyway
And as for Miui, it rocks! Not a day goes by without me checking for new updates
Same for me ,but with CM 10.2 :good::laugh::laugh:
dandrake47 said:
I
And as for Miui, it rocks! Not a day goes by without me checking for new updates
Click to expand...
Click to collapse
Related
Hey everyone.
I am running stock ics 4.0.3 , with Hydrocore kernel also my device is rooted and have CWM mod.
Im just wondering how i go about getting Android 4.1.1 Jelly Bean via ParanoidAndroid custom ROM.
Using the download off the rom on the site:
http://www.androidauthority.com/gal...-4-1-1-jelly-bean-paranoidandroid-rom-116835/.
Any help is appreciated thank you.
Nazeiro said:
Hey everyone.
I am running stock ics 4.0.3 , with Hydrocore kernel also my device is rooted and have CWM mod.
Im just wondering how i go about getting Android 4.1.1 Jelly Bean via ParanoidAndroid custom ROM.
Using the download off the rom on the site:
http://www.androidauthority.com/gal...-4-1-1-jelly-bean-paranoidandroid-rom-116835/.
Any help is appreciated thank you.
Click to expand...
Click to collapse
Since you are on Hydracore it is safe to wipe. But just to be sure just take a nandroid backup, by Booting in to recovery
Selecet Backup & restore--> Select Backup & do a nandroid backup Then just follow the installation procedure below
Keep both the ROM & Gapps file on your SD card
Wipe data / factory reset
Wipe Cache Partition
Go to Advanced - > Wipe Dalvik Cache
Select Install Zip from SD Card--> Select either internal card or SD card (external sd ) based on where you kept the file-->Install the zip file of the ROM
Same way Select & install the Gapps package
Go Back & wipe Cache Partion & Dalvik Cache once again
Reboot & you are Paranoid...:good:
the best advice I can just offer you is to go to the respective Paranoid Android ROM thread and post this question there. There many people there as well willing to help you. Or you can wait for someone who has PA already on their device and perhaps they can give you some nice info on how to go about installing PA on your phone.
sorry, I can't do much help on you as I'm not using JB for now.
You can flash any custom rom if you are on safe kernel, hydracore is safe and you can simply boot into cwm recovery and flash the rom zip followed by gapps.
Help i am stuck on the PA logo
singh.harvinder said:
You can flash any custom rom if you are on safe kernel, hydracore is safe and you can simply boot into cwm recovery and flash the rom zip followed by gapps.
Click to expand...
Click to collapse
My phone is now stuck on the boot logo for paranoid androd. How do i fix this , it will not boot?
You havent done full wipe or wiped cache/dalvik, probably.
Skickat från min GT-N7000 via Tapatalk 2
Do i need to...
Utacka said:
You havent done full wipe or wiped cache/dalvik, probably.
Skickat från min GT-N7000 via Tapatalk 2
Click to expand...
Click to collapse
I wiped the wiped both of the cache including the dalvik , i havent wipe/factory reset my phone , do i need to do that?
Nazeiro said:
I wiped the wiped both of the cache including the dalvik , i havent wipe/factory reset my phone , do i need to do that?
Click to expand...
Click to collapse
Yes you need to factory reset when coming from another rom that is not aosp based, i.e stock gb/ics.
Skickat från min GT-N7000 via Tapatalk 2
Nazeiro said:
My phone is now stuck on the boot logo for paranoid androd. How do i fix this , it will not boot?
Click to expand...
Click to collapse
I think you need to read instructions to the point before carrying them out. I had posted you the method for installation of PA which so far as I know is the correct one coming from any non AOSP based ROM. Pls. do follow the instructions. In case you are in doubt just ask for a reconfirmation.
Also any ROM developer will have the instructions posted in the OP thread, which you should definitely follow.
As others have told you, do a full wipe coming from a non AOSP based ROM..
By the Way if your problem is solved just change the OP title to Solved..
In regards to doing a full wipe: When doing the same process a couple of weeks back, coming from a stock ICS rom to PA i read you need to do a full wipe.
google brought me to this page: http://checkrom.com/threads/full-wipe-the-correct-way.432/
do you guys consider wipe/factory reset to be sufficient or is it a good idea to do this manual format of the /system/ /data/ and /cache/ partitions as per the above guide?
I was in a bit of doubt on that one at the time, so i did it anyway to be on the safe side and it all worked fine.
Paranoid android
Hey :laugh:
Someone can tell me what's the difference between the Paranoid rom from Imilka (PARANOIDANDROID 2.1 http://forum.xda-developers.com/showthread.php?t=1797698) and the Paranoid rom from Utacka (PARANOIDANDROID 2.15 http://forum.xda-developers.com/showthread.php?t=1871713)????
To be sure
OK, just to be sure I want to make everything straight... So if a have Hydracore kernel and a non-AOSP rom (for example ClassicRom V5) I can flash ParanoidAndroid? Even without AOSP rom? Just having Hydracore kernel and non-AOSP rom I can install ParanoidAndroid safely? I just have to do a Full wipe, then flash paranoid, flash Gapps, wipe cache and dalvik and reboot and thats it? Thanks in advance for the answer
kokodv said:
OK, just to be sure I want to make everything straight... So if a have Hydracore kernel and a non-AOSP rom (for example ClassicRom V5) I can flash ParanoidAndroid? Even without AOSP rom? Just having Hydracore kernel and non-AOSP rom I can install ParanoidAndroid safely? I just have to do a Full wipe, then flash paranoid, flash Gapps, wipe cache and dalvik and reboot and thats it? Thanks in advance for the answer
Click to expand...
Click to collapse
yea, hydracore is safe, flashing using hydracore is safe
Skickat från min GT-N7000 via Tapatalk 2
Hi all .. First thx for the Amazing Forum
Well I installed the AOKP rom on my galaxy mini everey things went right until rebooting the system
the phone stay repeating the bootanimation without turning ON
Plz Help Me I'm n**b
Go to cwm, wipe cache and dalvik, reboot. If it doesn't help reflash ROM or restore backup.
yackovsky said:
Go to cwm, wipe cache and dalvik, reboot. If it doesn't help reflash ROM or restore backup.
Click to expand...
Click to collapse
I tried to wipe cache and dalvik .. didn't work
i'll try to flash it to android 2.3.6 by odin & reinstall the aokp rom
thx for reply
still having the same problem
Err... you don't need to flash stock ROM again... just do a clean install of aokp... or any other ROM if it gives you trouble
yackovsky said:
Err... you don't need to flash stock ROM again... just do a clean install of aokp... or any other ROM if it gives you trouble
Click to expand...
Click to collapse
I installed CM10 .. thx for help ... i think there is a problem in the new version of AOKP
There's no problem for me are you sure you've got the latest?
you wiped cache and dalvik cache
but you will also need to wipe data
dheeraj (dhlalit11) said:
you wiped cache and dalvik cache
but you will also need to wipe data
Click to expand...
Click to collapse
I try it too But Still having the problm
Anyway Thx all I installed the cm10 now and it worked pretty cool
or can i just dirty wipe and wipe dalvik cache and im good to go?
thanks
Jamal Ahmed said:
or can i just dirty wipe and wipe dalvik cache and im good to go?
thanks
Click to expand...
Click to collapse
Not sure about this particular case, but I'll tell you my approach is to *always* do a full wipe + format partitions and internal sdcard before flashing *any* ROM. This way I'm sure there's nothing old left (app data, config etc.). Using this approach I've been running many ROMs without most of the bugs users report (using XXLSA now), I think it's worth the time to reinstall and reconfig everything. If you don't need to keep old data and config:
1) Wipe data & cache
2) Wipe dalvik cache
3) Format /system & /preload
4) Format internal sdcard (make sure you save anything you need before)
5) Flash ROM
6) Wipe cache again
7) Wipe dalvik cache again
8) Reboot
(Not sure if 6 and 7 are needed, but I prefer to be a bit paranoid in this case.)
Jamal Ahmed said:
or can i just dirty wipe and wipe dalvik cache and im good to go?
thanks
Click to expand...
Click to collapse
I think it depends on which custom rom u r currently on & which one you are gonna flash..for ex: flashing Ultimate v5 XXLSA over Alliance v1 XXLS7 may not work..
dbolivar said:
Using this approach I've been running many ROMs without most of the bugs users report (using XXLSA now))
Click to expand...
Click to collapse
I agree with you. If you perform a full wipe before to install a new rom, the probabilities of occur in some rom's issue (like FC or just a "simple" weird lag) are low. Tested personally.
It always better/advised to perform a full wipe.
In the end, you could do a nandroid backup of your last used rom, wipe everything, install the new rom, and then try to restore the data partition only. If you get some errors or general issue, you can easily full wipe everything again, and reinstall the new rom again... at least, you tried
Jamal Ahmed said:
or can i just dirty wipe and wipe dalvik cache and im good to go?
thanks
Click to expand...
Click to collapse
What does the OP states? Flashing ROMs is STILL a dangerous business.
Read the OP for the ROM you are installing
Jamal Ahmed said:
or can i just dirty wipe and wipe dalvik cache and im good to go?
thanks
Click to expand...
Click to collapse
leaks always require full wipe for it to function properly.
I flash LenioV3-noGapps.
But do not work Quick Settings (tiles) in the status bar.
If you have someone that mistake?
And how can I solve this.
stety said:
I flash LinaroV3-noGapps.
But do not work Quick Settings (tiles) in the status bar.
If you have someone that mistake?
And how can I solve this.
Click to expand...
Click to collapse
yes, happened to me also...but got it work after this (im talking about cm10.1 without gapps, wich is same) : 1. flash rom 2. wipe everything 3. install gapps 4. wipe cache and dalvik cache 5. reboot
Nixoman said:
yes, happened to me also...but got it work after this (im talking about cm10.1 without gapps, wich is same) : 1. flash rom 2. wipe everything 3. install gapps 4. wipe cache and dalvik cache 5. reboot
Click to expand...
Click to collapse
If in the rom are Gapps, so quick settings works.
But I want a rom without Gapps.
stety said:
If in the rom are Gapps, so quick settings works.
But I want a rom without Gapps.
Click to expand...
Click to collapse
than ask developer of rom, i toght you had problem with gapps instalation
i think u should try reflash this rom with full wipe data/cache/system because im using this without gapps with not problem.its work perfectly but using alot of ram (sometime my free ram is < 1mb).
ROM's based on original firmware and CM 11 work fine. Doom/Zombie/etc kernels work fine.
But SlimKAT, any official 4.1 or 4.2, Vanir or any other ROM causes hot reboot when opening camera for second time.
First time everything is OK, I can use e.g. PAC ROM for several days, but if I close the camera and open it again (without rebooting) it causes hot reboot. Always.
But CM11 is rock stable so is any original 4.3 and higher.
Any help with that?
Thanx!
slimKAT weekly 5.6's camera works without any problems .bro.
Orangewanted said:
slimKAT weekly 5.6's camera works without any problems .bro.
Click to expand...
Click to collapse
Yes, I know. Once ...
If I start if again it causes hor reboot.
CM 11, stock 4.3/4.4 no problems ...
Z O X said:
Yes, I know. Once ...
If I start if again it causes hor reboot.
CM 11, stock 4.3/4.4 no problems ...
Click to expand...
Click to collapse
Have you done a fresh installation ?
In CWM perform wipe data/factory reset and in mounts and storage section format system.
In TWRP choose advanced in wipe section and wipe dalvik cache, cache, system and data.
or please check your gapps which may cause the problem.
always use the gapps from here http://forum.xda-developers.com/showthread.php?t=2397942
Orangewanted said:
Have you done a fresh installation ?
In CWM perform wipe data/factory reset and in mounts and storage section format system.
In TWRP choose advanced in wipe section and wipe dalvik cache, cache, system and data.
or please check your gapps which may cause the problem.
always use the gapps from here http://forum.xda-developers.com/showthread.php?t=2397942
Click to expand...
Click to collapse
Yes, always fresh.
Point is, even flashed TFT ver 4.1 and 4.2 have same issues. Only 4.3 and 4.4 work OK :-/
Those are the GAPPS I always use ... Don't know. I'll try replacing camera libraries with version that work and see how that goes ...