Database Develop

[experimental] Overclock kernel (2.6.29) and how to

!!! IMPORTANT !!!
This is an experimental attempt.
The system might be made unstable, and the device be damaged.
Therefore, I do not recommend this to be used daily.
---
Last week, I found a hint of overclocking.
Droid Eris Android Development: a thread by zanfur
http://forum.xda-developers.com/showthread.php?t=679102
Click to expand...
Click to collapse
And at last, I succeeded to do it.
To say the conclusion at first, it works fine around 730MHz while a week.
At 768MHz and more over, it causes hunging up the system frequently.
Over 800MHz? I couldn't in this time. I think it needs VDD control and managing the freq tables more better to do it.
To get resources for overclocking, please refer the second post.

resources
The update for CM6RC2 on Legend: here to download. (build26, zipped)
FIXED: PERFLOCK disabled
Only the 'kernel' module for test other ROMs: here to download. (build26, not archived)
FIXED: PERFLOCK disabled
How to do it for kernel_legend_13be9c9c:
At first, you should read zanfur's post and his patch.
I just modified two tables in acpuclock-arm11.c excluding his having written.
1. modify cpufreq.c to let SetCPU to access freq tables
2. modify acpuclock-arm11.c to let HTC Legend be able to overclocking
3. modify msm7227_defconfig to disable PERFLOCK [optional]
You might not need modify defconfig when you use SetCPU which can purchase in Android Market.
SetCPU can disable PERFLOCK by setting. ([menu] -> [Perflock Disabler])
(acpuclock-arm11.c which I use is here)
FIXED: updated the correct file

Congratulations!
I will test soon

build26
My first kernel (build25) was built with CONFIG_PERFLOCK=y.
SetCPU can disable PERFLOCK.
However, I noticed there were few users of SetCPU now.
So I built it for HTC Legend users who do not have SetCPU.
Thanks,

Thanks to you, Kyosa, you make better this community with your work.

Screenshots
SetCPU - Recommendation settings
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Linpack - The result at 768MHz
Quadrant - The result at 768MHz
EDIT: resize images, rescaled at 768MHz and modified a banner for gentlemen and kids

Hi, if i use your CM6 RC2 Rom, is it just to flash this one: The update for CM6RC2 on Legend: here to download. (build26, zipped)
FIXED: PERFLOCK disabled and flash it with Clockworkmod then its done?
Edit, fixed it. I just flashed the One i talkd about and it Works perfect

OMG...940!!!!! I'm still on Eclair Rom with Sense and Quadrant gives me only 378 pts ....so far from your result!
Just a question: does your kernel module work with Eclair too ?

what do i wrong:
i follow all the step's but when i flash the patch my phone doesnt do anything.
it keep showing the HTC logo on a white screen.
if i flash the normal cm66 my phone works great again.

whitecobra87 said:
what do i wrong:
i'm follow the all the step's but when i flash the patch my phone doesnt do anything.
it keep showing the HTC logo on a white screen.
if i flash the normal cm66 my phone works great again.
Click to expand...
Click to collapse
Have the same problem with CM Legend 6.0.0 RC2 Build 66.

I have the same problem. Maybe someone could make a CM6RC2 build with OC-kernel?
Koysa: Thank you for all your work on the Legend

SRD720 said:
I have the same problem. Maybe someone could make a CM6RC2 build with OC-kernel?
Koysa: Thank you for all your work on the Legend
Click to expand...
Click to collapse
Working fine here with build 66

nobody could run?
ahh... It seems too immature to release.
give me a time to solve the problem on booting up.
I apologize that it is no use.
P.S.
My testing flow is below.
1. flash CM6RC2-build66 (with ClockWorks Recovery)
2. flash this kernel (build26) WITHOUT WIPE (with ClockWorks Recovery)
3. run SetCPU or other overclock tools

kyosa said:
nobody could run?
ahh... It seems too immature to release.
give me a time to solve the problem on booting up.
I apologize that it is no use.
P.S.
My testing flow is below.
1. flash CM6RC2-build66 (with ClockWorks Recovery)
2. flash this kernel (build26) WITHOUT WIPE (with ClockWorks Recovery)
3. run SetCPU or other overclock tools
Click to expand...
Click to collapse
Strange that it works for some people with build 66 and not for some people with the same build, hope you manage to solve that, have been waiting for this for some time now

Can anyone make a zip to test with official 2.03 rom? I'm very unexperienced so I don't know what to do with just the kernel file.
Anyways keep up the good work

It Works for me with cm6 rc2 build 66, just flashed it with clockwork
Sent from my HTC Legend using Tapatalk

I have the same problem when trying to flash on cm6...
To the people who have managed to flash it succesfully, is the cpu overclocked as soon as you boot, or do you have to change it in setCpu?
If so, maybe the problem as to why it works for some people and not others is that some cpu's cannot take the stress of the overclock and others can?

MichaelAlexanderBull said:
I have the same problem when trying to flash on cm6...
To the people who have managed to flash it succesfully, is the cpu overclocked as soon as you boot, or do you have to change it in setCpu?
If so, maybe the problem as to why it works for some people and not others is that some cpu's cannot take the stress of the overclock and others can?
Click to expand...
Click to collapse
i use SetCPU to toggle the overclock, and on mine it works perfectly

Works right out of the box for me with kyosas cm6.
Question: I am not really interested in overclocking, speed is fine as it is. But will this kernel make it possible to save battery by underclocking? Does the original kernel lower cpu speed e.g. at screen off? Or do I need this kernel and SetCPU profiles to lower cpu frequency?

Hello,
Is there any improvements in 3d gaming? Raging Thunder 2 or Gameloftgames for example...
greetz

Custom ROM/Kernel for Samsung Galaxy Mini (GT-S5570)

is there any info regarding custom roms or custom kernel for galaxy mini?
so we can overclock or get better performance for this phone....
thanks,

also...is any update to gingerbread?
thanks,

really waiting for it

I have to start developing the kernel, for the custom rom is not yet.
For now i focusing to overclock and add more feature in kernel.
The progress until now is i can get stable on 800mhz.
Sent from my Ideos

please provide an update...

tj_style said:
I have to start developing the kernel, for the custom rom is not yet.
For now i focusing to overclock and add more feature in kernel.
The progress until now is i can get stable on 800mhz.
Sent from my Ideos
Click to expand...
Click to collapse
hallo tj_style , so your member of this board too, remember me "cacau" member of kaskus forum lil G.
say how do you manage to install the custom kernel into your lil G, coz im having dificulties to maping the bml partition?

any updates?
Sent from my GT-S5570 using XDA App

Can't wait for this

Yeah.. I really can't wait for this
Sent from my GT-S5570 using XDA App

NOTE: Me are not responsible any problems caused by installed kernels.
So, Do it at your own Risk..!
For flashing this kernel is need the root access, because it will use SetCPU or similiar tool for managing the frequency.
Step:
1. Download the needed file --> TASS_OC.7z
2. Extract TASS_OC.7z
3. Run S5570_Odin Multi Downloader v4.38.exe
4. Click OPS button and choose TASS_v1.0.ops
5. Clink PDA buton and choose CODE_S5570DXKA8_REV02_OC.tar.md5
6. Power up Phone to Download Mode (Center key + Vol Down key + Power key)
7. After Odin detected the Phone, Click Start button
8. Wait for flashing process is finnished, and install SetCPU or similliar tool.
After that, you can configure the frequency...
For back to stock kernel, the step is same as above. but you choose the CODE_S5570DXKA8_REV02.tar.md5 for PDA.
Note: If the phone is hang or reboot, choose the lower frequency until you find the stable frequency.
I can play AngryBird RIO very smooth on 825MHZ with Performance for Scaling profile..
Just press Thanks button if you like my compiled kernel..

Cool! Finally, we have one Thank you!
Besides OC, what are/is the difference of this ROM from the stock?
Does it still use Samsung file system (rfs) or ext2/4?

Great. But how about the battery usage?
Post it to kaskus lil'G Forum.

tj_style said:
NOTE: Me are not responsible any problems caused by installed kernels.
So, Do it at your own Risk..!
For flashing this kernel is need the root access, because it will use SetCPU or similiar tool for managing the frequency.
Step:
1. Download the needed file -->
2. Extract TASS_OC.7z
3. Run S5570_Odin Multi Downloader v4.38.exe
4. Click OPS button and choose TASS_v1.0.ops
5. Clink PDA buton and choose CODE_S5570DXKA8_REV02_OC.tar.md5
6. Power up Phone to Download Mode (Center key + Vol Down key + Power key)
7. After Odin detected the Phone, Click Start button
8. Wait for flashing process is finnished, and install SetCPU or similliar tool.
After that, you can configure the frequency...
For back to stock kernel, the step is same as above. but you choose the CODE_S5570DXKA8_REV02.tar.md5 for PDA.
Note: If the phone is hang or reboot, choose the lower frequency until you find the stable frequency.
I can play AngryBird RIO very smooth on 825MHZ with Performance for Scaling profile..
Just press Thanks button if you like my compiled kernel..
Click to expand...
Click to collapse
can you post a screenshot of your setcpu settings, im completely noob on this one

SetCPU Setting:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SetCPU Info:

tj_style said:
SetCPU Setting:
View attachment 562013
SetCPU Info:
View attachment 562014
Click to expand...
Click to collapse
why is is that yours is 844 mhz, minei s just at 825

deathbringer6 said:
why is is that yours is 844 mhz, minei s just at 825
Click to expand...
Click to collapse
for now the 844mhz is not yet stable. so I release the stable kernel (825mhz)
Sent from my Ideos

im getting lots of crashes and restarts, any help?
Sent from my GT-S5570 using XDA App

deathbringer6 said:
im getting lots of crashes and restarts, any help?
Sent from my GT-S5570 using XDA App
Click to expand...
Click to collapse
there's not any crash in my galaxy mini. i use S5570DXKA3 firmware.
Sent from my Ideos

Wow.. finaly!! Thanks a lot bro..

tj_style said:
there's not any crash in my galaxy mini. i use S5570DXKA3 firmware.
Sent from my Ideos
Click to expand...
Click to collapse
im using dxka8 maybe a firmware conflict?
Sent from my GT-S5570 using XDA App

[Q] [KERNEL]2.3.4 overclock

Kernel for 2.3.4
Program for overclock SetCPU,CPU master
V1
Add overclock gpu 240Mhz(Does not work)
V2
Add overlock cpu 120-1300Mhz(stable)
V3
Off LG DVFS
Add swap init.d
V4
Source kernel 20Q
Add Smartass v2
Add SIO I/O Schedulers
Next version
Update EXT4
Overclock to 1370Mhz
Overclock GPU 220MHZ
Scheduler bfq
Installing a recovery

Nice! Waiting for that 1370mhz OC !

tested and working
1.3 GHz OC is stable. Confirmed for :
1. Supressed ROM series
2. PRADA ROM series and
3. SAPPHIRE ROM series.
good work. however, i cannot comment yet on battery consumption and heat.
gotta use it a bit more for these and any related instability.
thanks.

This kernel based on Gingerbread Official kernel or CM7 kernel?
(Seeing as they have only been tested by @achyut)

Works on all roms ?
EDIT: with 2.3.4

FunkyGanja said:
This kernel based on Gingerbread Official kernel or CM7 kernel?
(Seeing as they have only been tested by @achyut)
Click to expand...
Click to collapse
U got answer in first post.:banghead:

This kernel is not so good on the optimus max rom because I have make a full benchmark with quadrant and antutu and I got 870 and 2100 so it's under the stock rom score

it is can for CM7 based? the information not clear for what this kernel stock or CM7? thanks.

I dnt know about this .. i have xeus 6.3n rom and the kernel i havent toutched yet.. can some one explain . Thnx
Sent from my LG-P970 using xda premium. If I Helped You, Hit The Thanks Boutton. Jesus !!

puisicintaqu said:
it is can for CM7 based? the information not clear for what this kernel stock or CM7? thanks.
Click to expand...
Click to collapse
Yes it is clear. CM7 use kernel 2.3.7.
This is 2.3.4, which is stock kernel

ok i install this kernel on zeus 6.3n. i know, that was madness.
seem to work, lg bootup, but when i switch screen on home screen, was laggy,even how to set the 1300 MHz which cpu master.
test in Quadrant in 5 round per row show only max 1056 points.
I tested about 20 minutes, so the more I can not tell
sry for my bad english

marius987 said:
ok i install this kernel on zeus 6.3n. i know, that was madness.
seem to work, lg bootup, but when i switch screen on home screen, was laggy,even how to set the 1300 MHz which cpu master.
test in Quadrant in 5 round per row show only max 1056 points.
I tested about 20 minutes, so the more I can not tell
sry for my bad english
Click to expand...
Click to collapse
Can anyone confirm this?
Is it really working that bad under Zeus 6.3?

It works fine over V20O and Q as far as i tested no heating but more speed!

i can confirm this kernel is good enough for me.
scaling/governor: performance;
I/O scheduler: sio
check the CPU SPY screen shot.
the cell mainly stays on the minimum scaling when not used, which is very essential for the battery.
overall, the performance is snappier than stock (obvious thing)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

whenever i am tryin to OC on the default kernel of Suppressed ROM...it doesnt work...whenever i slide the MIN CPU to 1000Mhz using SetCPU, the CPU becomes 300Mhz and i had to pull the battery out to reboot then slide it back to default MAX 1000Mhz and MIN 300Mhz..
so does this kernel like really solves this problem? and how do i install it?

CalamitySir said:
whenever i am tryin to OC on the default kernel of Suppressed ROM...it doesnt work...whenever i slide the MIN CPU to 1000Mhz using SetCPU, the CPU becomes 300Mhz and i had to pull the battery out to reboot then slide it back to default MAX 1000Mhz and MIN 300Mhz..
so does this kernel like really solves this problem? and how do i install it?
Click to expand...
Click to collapse
flash it via recovery....the screenshot is from supressed rom.

achyut said:
flash it via recovery....the screenshot is from supressed rom.
Click to expand...
Click to collapse
I can also confirm it works flawless on Noa .

does the V4 have the V3 fix? sorry this might be a stupid question but just wanna confirm it...

CalamitySir said:
does the V4 have the V3 fix? sorry this might be a stupid question but just wanna confirm it...
Click to expand...
Click to collapse
yes it has.

How's Smartreflex and MPU? You can check via dmesg. If something shows "hub_opp_init: MPU does not support XXXX MHz" then you have a problem. frequencies may show but there would be complications on voltages.
The slowness is via DVFS IMO. better use init.d, "scaling_max_freq" for OC.

[Q] Sleep of death in gingerdx v030

Someone's having the bug "sleep of death" with gingerdx v30? In v29 worked perfectly
PS: I'm using Alfs v09c CM7

fps_fan said:
Someone's having the bug "sleep of death" with gingerdx v30? In v29 worked perfectly
PS: I'm using Alfs v09c CM7
Click to expand...
Click to collapse
sometimes i've had that with gdx v29 too. I presume it depends by a some different factors...

kust0r said:
sometimes i've had that with gdx v29 too. I presume it depends by a some different factors...
Click to expand...
Click to collapse
I have same experience as you...
I'm on stock kernel
sent from.......
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

For me in v029 it did never happen (tried with v09a and v09c)... In gingerzaraki final also never happened (push the button and the screen does not turn on instantly).
But it often happens in v030, returning to gingerzaraki... Simple and fast :laugh:

What is sleep of death btw????

HemdonG said:
What is sleep of death btw????
Click to expand...
Click to collapse
According to the name....
Screen goes off & never come back...
No matter what u do until pull the battery out
sent from.......

haven't tried gdx 30 YET. but i've experienced the wake up bug on some jb roms. now the problem may have different causes, but have you guys tried staying on ondemand governor? or setting a higher min frequency on cpu? like i said, it's probably not going to work, but it's worth a try.
[cAs]

People having this problem can try the next flashable zip: http://forum.xda-developers.com/attachment.php?attachmentid=1667297&d=1358875962 .
As I've explained before in the GingerDX thread ( http://forum.xda-developers.com/showpost.php?p=37044702&postcount=12246 ), at least in stock kernel, the PERFORMANCE governor is the default and it is reverted back as the default after each reboot, you can change it in the Performance menu but it will not pick up the values set in hw_config.sh.
For those of you who are with a custom kernel, you can check this by going to the Performance menu and entering CPU Settings. If PERFORMANCE is selected as the governor and you haven't touched this, it means that the custom kernel version has the same problem as the stock one.
Why does this matter? This might have something to do with the phone not being able to come out of deep sleep. So you can try the flashable zip. It basically guarantees that ONDEMAND is selected as the default governor with the values that have been working for our phone.

Fortun said:
People having this problem can try the next flashable zip: http://forum.xda-developers.com/attachment.php?attachmentid=1667297&d=1358875962 .
As I've explained before in the GingerDX thread ( http://forum.xda-developers.com/showpost.php?p=37044702&postcount=12246 ), at least in stock kernel, the PERFORMANCE governor is the default and it is reverted back as the default after each reboot, you can change it in the Performance menu but it will not pick up the values set in hw_config.sh.
For those of you who are with a custom kernel, you can check this by going to the Performance menu and entering CPU Settings. If PERFORMANCE is selected as the governor and you haven't touched this, it means that the custom kernel version has the same problem as the stock one.
Why does this matter? This might have something to do with the phone not being able to come out of deep sleep. So you can try the flashable zip. It basically guarantees that ONDEMAND is selected as the default governor with the values that have been working for our phone.
Click to expand...
Click to collapse
So after flashing your zip..
Deep sleep problem will be solved??
sent from.......

Gogeta said:
So after flashing your zip..
Deep sleep problem will be solved??
Click to expand...
Click to collapse
I can't guarantee that.
The X8 here never had that problem and it's running with the script that's inside the flashable zip. So, as I said, it might solve the issue.
What I can guarantee is that, at least for stock kernel, the intended governor with its intended values will be loaded. That's not the case with the latest release of GingerDX. The values are there, but they're not loaded correctly.

I had deep sleep only when screen was off and I pluged in charger. Gdx v30 + alfs 9c

What cpu gouvernor are you using ?
Sent from my Nexus 7 using xda premium

I tried settind the governor on ondemand & checked 'set on Boot' in cyanogen mod settings & after reboot it wasn't reset to performance
It was still ondemand
sent from.......

Mockingbird said:
What cpu gouvernor are you using ?
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
I made no change performance in CyanogenMod settings, did not check what was the governator and native frequency, but I am back to gingerzaraki in this i never had this problem =D I did proper installation on v030: full wipe, rom (the same kernel v09c), libsensors and gapps

Gogeta said:
I tried settind the governor on ondemand & checked 'set on Boot' in cyanogen mod settings & after reboot it wasn't reset to performance
It was still ondemand
Click to expand...
Click to collapse
As I've explained in the GingerDX thread, you can do that but the values for the governor won't be loaded. What values? These:
Code:
echo 80 > /sys/devices/system/cpu/cpu0/cpufreq/ondemand/up_threshold
echo 40 > /sys/devices/system/cpu/cpu0/cpufreq/ondemand/down_differential
echo 400000 > /sys/devices/system/cpu/cpu0/cpufreq/ondemand/sampling_rate
echo 122880 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
They're present in the hw_config.sh and are expected to be loaded at boot, as ONDEMAND is. They don't. They slightly modify how the governor behaves for our phone.
Having said that, just changing ONDEMAND as the governor via CyanogenMod Settings might do the trick.

[KERNEL] CM11 OC KERNEL (Thor)

Hi,
Here is an OC kernel for you to try. The max cpu frequency is overclocked to 2.35 Ghz instead of 2.15 Ghz. The stability is not well tested but i could play 20 minutes of Asphalt 8. Note that benchmarks does not seems to profit a lot from this overclock, i guess the thermal engine is always optimizing speeds no matter what. That's said i can say that for general use i can feel a little difference.
To be flashed via TWRP recovery (this is for 7" hdx, thor)
Changelog
=========
- v2 : actually include the oc kernel

Awesome! I'm gonna try it and report back

Awesome!
You should consider adding more CPU governors too.

I flashed it, but should I see the change in the tweaking apps? No Frills CPU Control and Trickster Mod still report 2.15.

icedtrip said:
I flashed it, but should I see the change in the tweaking apps? No Frills CPU Control and Trickster Mod still report 2.15.
Click to expand...
Click to collapse
Same here I don't see any change in trickster mod or performance for CPU freq's.
Sent from my Kindle Fire HDX using XDA Free mobile app

Hum Strange, did you guys looked in the CM cpu settings ? I'll take a look soon.

Cpasjuste said:
Hum Strange, did you guys looked in the CM cpu settings ? I'll take a look soon.
Click to expand...
Click to collapse
How about RAM memory sir , my HDX 7 CM11 only 1642 MB ( 1742 MB stock )
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Cpasjuste said:
Hum Strange, did you guys looked in the CM cpu settings ? I'll take a look soon.
Click to expand...
Click to collapse
Where are the CM CPU Settings? I looked under "About this Tablet" and other areas within the settings, but can't find anything that reports on the CPU speed. I do show this as the kernel, 3.4.0-perf-g625444.

My flashable zip must be broken :x

Cpasjuste said:
Hum Strange, did you guys looked in the CM cpu settings ? I'll take a look soon.
Click to expand...
Click to collapse
Yeah checked there as well in settings > performance and CPU does not show OC.
Sent from my Nexus 6 using XDA Free mobile app

Don't bother, i packed the wrong boot.img (stock one), so stupid Uploading the correct one, OC to 2.35 Ghz as it seems stable (at least on my device).
Edit: uploaded

Cpasjuste said:
Don't bother, i packed the wrong boot.img (stock one), so stupid Uploading the correct one, OC to 2.35 Ghz as it seems stable (at least on my device).
Edit: uploaded
Click to expand...
Click to collapse
Okay, now it is working! Will report back after testing for a while.
Sent from my Kindle Fire HDX using XDA Free mobile app

Will flashing this fix the bluetooth in the other ROM?

TheZander said:
Will flashing this fix the bluetooth in the other ROM?
Click to expand...
Click to collapse
No...

Using Apollo and jealous with Thor user....

So far everything seems stable. I do see a slight, but noticeable improvement in performance. I got over 42000 in antutu with this kernel. Thanks @Cpasjuste

Cpasjuste said:
Don't bother, i packed the wrong boot.img (stock one), so stupid Uploading the correct one, OC to 2.35 Ghz as it seems stable (at least on my device).
Edit: uploaded
Click to expand...
Click to collapse
Everything is working now
WARpig5 said:
So far everything seems stable. I do see a slight, but noticeable improvement in performance. I got over 42000 in antutu with this kernel. Thanks @Cpasjuste
Click to expand...
Click to collapse
Impressive! I hit over 40000....better than the 39000 I got before.

tuanda82 said:
Using Apollo and jealous with Thor user....
Click to expand...
Click to collapse
If you have a spare Apollo around for me ....

Cpasjuste said:
If you have a spare Apollo around for me ....
Click to expand...
Click to collapse
Too bad I am in Vietnam...

I hate to be that person all the time but I just received 31,000 in my antutu. How is that possible. I flashed the OC kernel. Set governor to performance. It went to 2342mhz.
Ran it and got that tiny score... How did the other member gave 40,000????