[Q] Galaxy Mini bricked after exiting Clockworkmod after wiping data - Samsung Galaxy Mini

SO here's the long story short :
I installed minisense 4 rom on my mini.then tried to install cyanmobile X.for doing the latter I wiped data + cache + dalvik cache. then rebooted the system forgetting to recover the minisense 4 back from the nandroid backup I did. now my phone's bricked. I can't get into downloading mode (nothing happens if I press vol down + home +power ). I presses vol up + down + hom+ power . that installed the drivers...and odin detects is as "Android" not GT-S5570. I have found similar threads but nothing has worked so far. I still haven't used the USB jig method yet though..... Please help me out here!! :crying:
by the way I needed to recover minisense 4 because the installation of the cyanmobile X (update-CyanMobile-eXperience-Blade-20120721-Release.zip) didn't install...gave a status 7 ( when later pointed out by a member here it was for blade no galaxy mini [obviously] )
Thanks in advance! :angel:

please some one!! :'(

Since, u have no Download Mode, so, if odin is somehow detecting ur phone, try flashing stock firmware that way only. By the way, odin only show yellow com port mapping box indication as soon as you connect ur phone to pc. It shows model no. on its title bar due to that ops file you've selected(regardless of whether you've physically connected ur device to pc OR NOT). Also, use Galaxy Mini mobile drivers on ur pc(ur drivers might also be corrupt).
Otherwise, take it to Service Center & get it repaired there.:thumbup::thumbup:
Sent Via XDA™ Premium

Galaxy_Rohit said:
Since, u have no Download Mode, so, if odin is somehow detecting ur phone, try flashing stock firmware that way only. By the way, odin only show yellow com port mapping box indication as soon as you connect ur phone to pc. It shows model no. on its title bar due to that ops file you've selected(regardless of whether you've physically connected ur device to pc OR NOT). Also, use Galaxy Mini mobile drivers on ur pc(ur drivers might also be corrupt).
Otherwise, take it to Service Center & get it repaired there. :thumbup: :thumbup:
Sent Via XDA™ Premium
Click to expand...
Click to collapse
hey thanks Rohit!... I downloaded the samsung galaxy mini firmware for india and also the ops file requited. it set them up in odin but odin get's stuck at "set up connection" and another question : the firmware S5570DDKQ7_S5570ODDKQ6_S5570DDKQ7_HOME.tar.md5 came with a dll file "SS_Dl.dll" where do I use this dll file ?

Nilabhra said:
hey thanks Rohit!... I downloaded the samsung galaxy mini firmware for india and also the ops file requited. it set them up in odin but odin get's stuck at "set up connection" and another question : the firmware S5570DDKQ7_S5570ODDKQ6_S5570DDKQ7_HOME.tar.md5 came with a dll file "SS_Dl.dll" where do I use this dll file ?
Click to expand...
Click to collapse
Try another USB port or even another firmware. I too was stuck at setup connection when flashing Gingerbread DDKT3, so I went for FROYO & it worked. But u can also try another USB port(to connect ur phone).
Don't touch/delete that "SS_DL.dll" file. Just use that firmware package file(.tar.md5) and place it in One Package field in Odin. Place ops file, and click start.
Done!!
Sent Via XDA™ Premium

Galaxy_Rohit said:
Try another USB port or even another firmware. I too was stuck at setup connection when flashing Gingerbread DDKT3, so I went for FROYO & it worked. But u can also try another USB port(to connect ur phone).
Don't touch/delete that "SS_DL.dll" file. Just use that firmware package file(.tar.md5) and place it in One Package field in Odin. Place ops file, and click start.
Done!!
Sent Via XDA™ Premium
Click to expand...
Click to collapse
okay thanks again rohit! okay so where do I get the froyo firmware ? samfirmware doesn't have it sadly .I have tried differnt port and isntalled/uninstalled the driver. and if can please tell me what exactly is wrong wiith my phone? I wiped the data that means it's like a PC without an OS right ? so why don't I get the boot screen?

GT-S5570 DXKB1 FROYO 2.2.1
http://www.mediafire.com/?c32k2du6gwmpe2n
Sent Via XDA™ Premium

Galaxy_Rohit said:
GT-S5570 DXKB1 FROYO 2.2.1
http://www.mediafire.com/?c32k2du6gwmpe2n
Sent Via XDA™ Premium
Click to expand...
Click to collapse
I have been searching that for 20 mins and you got it? where di you get the link!! and thanks a ton! sure hope it works!

ur welcome...
Sent Via XDA™ Premium

it's not downloading rohit !! "Repair Download" comes up... (which obviously down't repair anything)

I've just tried. It's downloading bro!!. From phone, use UC browser & long press download & select "save as"(3G/Wifi preferred).
Sent Via XDA™ Premium

Galaxy_Rohit said:
I've just tried. It's downloading bro!!. From phone, use UC browser & long press download & select "save as"(3G/Wifi preferred).
Sent Via XDA™ Premium
Click to expand...
Click to collapse
ya it's downloading...hope it works.. :fingers-crossed:

nope.... still stuck at setup connection in froyo... :'( what's wrong with it?

First, try switching it on now... Do u see that screen indicating
"phone-----/!\-----computer". If u see this, then remove battery re-insert it & go for download mode. It should enter now.
OR try this...
Place all files correctly. There r usually four files in Froyo fw. The correct order is(see the stating filename):-
OPS:- TASS_v1.0.ops
BOOT:- APBOOT....
PHONE:- MODEM....
PDA:- CODE....
CSC:- CSC...
Sent Via XDA™ Premium

okay...trying...

what goes in EFS ? the kernel ? and trid that method... the phone's disconnecting from pc when I try to power up, nothing else happens (yellow box disappears and usb connection sound plays in pc )

Remove usb cable, then switch it on. Is phone responsing now? Post a screenshot(if possible.)
Sent Via XDA™ Premium

Galaxy_Rohit said:
Remove usb cable, then switch it on. Is phone responsing now? Post a screenshot(if possible.)
Sent Via XDA™ Premium
Click to expand...
Click to collapse
no phone is completely unresponsive as before but these are the set of observations I have made :
when usb is connected
1 ) if I press the power button + home + vol up + vol down - it connects to pc and installs drivers
2 ) if I press just the power button + home vol down - it disconnects
3 ) if I press just the power button it disconnects
4 ) the battery heats up If I leave it connected to PC
I haven't observed anything else...otherwise phone's just as if there's no battery

O.K. Try flashing Froyo or Gingerbread again or do this (with least luck...)
1. Remove sim/sdcard & battery.
2. Connect ur phone to pc with odin ready.
3. Press download mode combo keys(without battery)
4. Insert battery while holding keys.
See if something happens(download mode) or if odin detects ur phone, etc.
Sent Via XDA™ Premium

Galaxy_Rohit said:
O.K. Try flashing Froyo or Gingerbread again or do this (with least luck...)
1. Remove sim/sdcard & battery.
2. Connect ur phone to pc with odin ready.
3. Press download mode combo keys(without battery)
4. Insert battery while holding keys.
See if something happens(download mode) or if odin detects ur phone, etc.
Sent Via XDA™ Premium
Click to expand...
Click to collapse
nope, phone's not detected at all by this method

Related

All gone wrong.

Something really gone wrong for me here and have a feeling I have a brick.
1. Flashed ROCKET ROM-V19-XXLA4 from external sd using CWM.
2. Flash was confirmed rebooted.
3. Got Bootloop (Rocket Logo)
4. Could boot into download mode but PC not seeing device.
5. Removed battery for over 1 min.
6. Still no difference, the device just cant be seen. Even after reinstalling the drivers. via Kies trouble shooting.
Anyone have any ideas??
exceluk1 said:
Something really gone wrong for me here and have a feeling I have a brick.
1. Flashed ROCKET ROM-V19-XXLA4 from external sd using CWM.
2. Flash was confirmed rebooted.
3. Got Bootloop (Rocket Logo)
4. Could boot into download mode but PC not seeing device.
5. Removed battery for over 1 min.
6. Still no difference, the device just cant be seen. Even after reinstalling the drivers. via Kies trouble shooting.
Anyone have any ideas??
Click to expand...
Click to collapse
Did you follow hus advuce to a t.
Did you have a backup
Can yiuget into recovery via vol up.home.power if si restore last working config.
Failing that its odin and stock rom
Its virtually impossible to brick a samsung phone yesvit can occur but v v unlikely
Sent from my GT-N7000 using xda premium
I can boot into "Odin Mode" but the device is just not responding via USB.
I do have a backup on an external device but without being able to boot into CWM or My laptop to recognise the device im stuck.....
exceluk1 said:
I can boot into "Odin Mode" but the device is just not responding via USB.
I do have a backup on an external device but without being able to boot into CWM or My laptop to recognise the device im stuck.....
Click to expand...
Click to collapse
So if you open odin on pc making sure kies is closed fully inc tray icon and then plug the phone in it does not show in odin as ready ir cinnected
Sent from my GT-N7000 using xda premium
I had the same problem today, but it worked when i did this:
- Volume down + Home + Power
- Do not press continue yet
- Open Odin
- Connect it to the computer
- Choose Continue on the Note
Now the computer should install two new drivers (modem and another one), and then the phone will pop up on the computer.
Odin is seeing :- 0:[COM4]
Thanks so much really thought I'd bricked it. Forgot all about Odin A Beer and a thanks to you both.
Just a note, not sure what went wrong but I had to flash a full stock ROM including the Modem, Code and Multi to get it working again.
exceluk1 said:
Odin is seeing :- 0:[COM4]
Thanks so much really thought I'd bricked it. Forgot all about Odin A Beer and a thanks to you both.
Just a note, not sure what went wrong but I had to flash a full stock ROM including the Modem, Code and Multi to get it working again.
Click to expand...
Click to collapse
Well least ya back up and running thats all that matters.
I can now sleep Didnt want to leave ya hanging lol
We have all had that scare moment when it goes wrong but so sweet when she boots up again
Sent from my GT-N7000 using xda premium
2nd attempt took all of 5 - 6 mins with no issues at all

[Q] Help Needed in Unbricking Samsung Galaxy Pop (GT S5570)

Please help me out on this....
(Sorry if I posted in wrong section)
I successfully upgraded my Pop to gingerbread 2.3.6 and rooted it. It was working fine for some days after which It got messed up
when I updated the titanium backup app from the market. The app asked for some su permissions and suddenly the screen went blank.
After that I realized that its a hard bricked. The screen is blank whatever I do. I searched for many tutorials to unbrick it but no fruitful results yet.
I tried a lot to enter download mode and after several attempts luckily the three button combo worked and it got shown in ODIN on some port connected.
When I started the process of firmware upgrade it gets stuck in "Connection Setup Phase".
Does USB Jig method is worth trying in this situation ??
Pease tell me the solution of it. I am attaching the screenshot of the ODIN. Please Please Please help.
Thanks a lot in advance...
what is on your mobile screen download mode or something like phone--!--computer picture
ok whatever try this
close Odin, turn off mobile, start Odin and put files turn on mobile in download mode connect the cable and start flashing
PS : phone--!--conputer shows on the screen when upgrade get fail, not to worry it is just like another version of Odin
until you can light up the mobile its not a hard brick
I will suggest you to use firmware which are available without bootloader as you were previously on gb, just to remove the risk of hard brick
nothing on screen
yagnesh55 said:
Please help me out on this....
(Sorry if I posted in wrong section)
I successfully upgraded my Pop to gingerbread 2.3.6 and rooted it. It was working fine for some days after which It got messed up
when I updated the titanium backup app from the market. The app asked for some su permissions and suddenly the screen went blank.
After that I realized that its a hard bricked. The screen is blank whatever I do. I searched for many tutorials to unbrick it but no fruitful results yet.
I tried a lot to enter download mode and after several attempts luckily the three button combo worked and it got shown in ODIN on some port connected.
When I started the process of firmware upgrade it gets stuck in "Connection Setup Phase".
Does USB Jig method is worth trying in this situation ??
Pease tell me the solution of it. I am attaching the screenshot of the ODIN. Please Please Please help.
Thanks a lot in advance...
Click to expand...
Click to collapse
dheeraj (dhlalit11) said:
what is on your mobile screen download mode or something like phone--!--computer picture
ok whatever try this
close Odin, turn off mobile, start Odin and put files turn on mobile in download mode connect the cable and start flashing
PS : phone--!--conputer shows on the screen when upgrade get fail, not to worry it is just like another version of Odin
until you can light up the mobile its not a hard brick
I will suggest you to use firmware which are available without bootloader as you were previously on gb, just to remove the risk of hard brick
Click to expand...
Click to collapse
There is nothing shown on my screen...
no computer like symbol....
nothing whatever i do...
It just goes sometimes in download mode when the 3 button combos is pressed (very rarely), gets detected by ODIN but stucks on connection error...
yagnesh55 said:
There is nothing shown on my screen...
no computer like symbol....
nothing whatever i do...
It just goes sometimes in download mode when the 3 button combos is pressed (very rarely), gets detected by ODIN but stucks on connection error...
Click to expand...
Click to collapse
First of all delet all drivers on pc and install them new, just to be on the save side! Then get firmware for your country i suggest you to use 4file pack no the 1file ones! Then get odin v4.38 put your device in download mode and conect to pc put all 4files in the right place in odin and start flashing!! It should not take longer then 6min!! Let odin finish when you see blue pass disconect and be lucky!!
Sent from my GT-S5570 using xda premium
It Doesnt Help
galaxy mini said:
First of all delet all drivers on pc and install them new, just to be on the save side! Then get firmware for your country i suggest you to use 4file pack no the 1file ones! Then get odin v4.38 put your device in download mode and conect to pc put all 4files in the right place in odin and start flashing!! It should not take longer then 6min!! Let odin finish when you see blue pass disconect and be lucky!!
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
I tried this thing many times but still ODIN stucks on connection setup...
Also tried on different machine...
Please help....
yagnesh55 said:
I tried this thing many times but still ODIN stucks on connection setup...
Also tried on different machine...
Please help....
Click to expand...
Click to collapse
Have you tried using a different port? Or a different cable? Also, try unchecking the reset time option on ODIN.
tietganFTW said:
Have you tried using a different port? Or a different cable? Also, try unchecking the reset time option on ODIN.
Click to expand...
Click to collapse
there are two data cables of the same shape but their holes (which goes in mobile port) are of different size try the data cable whose hole is much big
I will try to post a pic
in short use the original Samsung one
1st try flashing cwm via odin n then wipe data wipe sd partition n then go to stock rom via odin
Flash Stock Rom for ur device using odin..... Please do not do any thing you area not aware of..
Files the steps and will make ur device ok
Click THANKS button if I helped, or u liked my post.
Will be honored.
dheeraj (dhlalit11) said:
there are two data cables of the same shape but their holes (which goes in mobile port) are of different size try the data cable whose hole is much big
I will try to post a pic
in short use the original Samsung one
Click to expand...
Click to collapse
ya I got ur point regarding the port size...
I m using the port of samsung original having big hole....
sanjay.ghanchi said:
1st try flashing cwm via odin n then wipe data wipe sd partition n then go to stock rom via odin
Click to expand...
Click to collapse
The screen is completely blank whatever I do so I cant do these steps ....
debanikonline said:
Flash Stock Rom for ur device using odin..... Please do not do any thing you area not aware of..
Files the steps and will make ur device ok
Click THANKS button if I helped, or u liked my post.
Will be honored.
Click to expand...
Click to collapse
Ya m flashing stock ROM using ODIN but it gets stuck on connection setup stage forever (see attached file)...
Please help...
Anyone having idea if USB jig work in this case...
yagnesh55 said:
Anyone having idea if USB jig work in this case...
Click to expand...
Click to collapse
USB jig only boots mobile in download mode
but you are saying you can sometimes boot in download mode so no use of USB jig is required
you should take it to samsung
Weird. I dont know how you could brick your phone with titanium backup app.
Your battery could be dead. Charge your phone for 2 hours.
Then try using Odin using a different USB Port.
chemicalrage said:
Weird. I dont know how you could brick your phone with titanium backup app.
Your battery could be dead. Charge your phone for 2 hours.
Then try using Odin using a different USB Port.
Click to expand...
Click to collapse
Nop I charged my battery full with another battery charger before using ODIN but still the problem persist.
I think I have to take it to Samsung service center but my warranty is over so I think they will take a huge amount
to fix it.
Anyone still having some idea on this...
Pease help...
yagnesh55 said:
Nop I charged my battery full with another battery charger before using ODIN but still the problem persist.
I think I have to take it to Samsung service center but my warranty is over so I think they will take a huge amount
to fix it.
Anyone still having some idea on this...
Pease help...
Click to expand...
Click to collapse
Dude We are On the Same Boat I Tryed Searching With All My resources But Now There Is Only 1 Option Left for Me to Visit to a Service Center
Service Centre Sucks
amxthan0 said:
Dude We are On the Same Boat I Tryed Searching With All My resources But Now There Is Only 1 Option Left for Me to Visit to a Service Center
Click to expand...
Click to collapse
I gave my phone to service centre (warranty is over ) before few days and they told than some connector in the circuit is damaaged and need to be replaced with new
one and its cost is 4278 INR . Can u believe that ??? 4278 bucks. Its better to buy a new phone.
yagnesh55 said:
I gave my phone to service centre (warranty is over ) before few days and they told than some connector in the circuit is damaaged and need to be replaced with new
one and its cost is 4278 INR . Can u believe that ??? 4278 bucks. Its better to buy a new phone.
Click to expand...
Click to collapse
You should have tried another stock firmware or another USB port when your phone luckily entered download mode. Same problem happene with me & get solved by flashing another stock firmware.
Sent Via XDA™ Premium
Galaxy_Rohit said:
You should have tried another stock firmware or another USB port when your phone luckily entered download mode. Same problem happene with me & get solved by flashing another stock firmware.
Sent Via XDA™ Premium
Click to expand...
Click to collapse
Tried every damn thing but ODIN gets stuck on connection setup step....

my galaxy mini is not turning on

this is d screen i get wen i try to restart d fone..... please help
Turn it in download mode after removing battery once and then flash new rom using odin. ...
Thats only solution i think as i have experienced same problem several times
sent from heaven
arpitkh96 said:
Turn it in download mode after removing battery once and then flash new rom using odin. ...
Thats only solution i think as i have experienced same problem several times
sent from heaven[/ive tried it.. but odin is not working.. it s force closing.. as u can see from my screen image that download from pc to mobile is disabled..
Click to expand...
Click to collapse
I've gotten this before. I think it's caused by a failed flash in a rom, either interrupted or something else. The way I solved this was to pluck out the battery, put it back in, boot into download mode (power+home+vol down buttons). Then make sure u have Samsung usb driver installed and then run Odin as administrator. Continue to flash the stock firmware.
Sent from my GT-S5570 using xda app-developers app
take it as second download mode
just connect it with Odin and flash the firmware
this normally happens when flashing process is interrupted
as u can see from my screen image that download from pc to mobile is disabled..
Click to expand...
Click to collapse
Also, the exclamation mark (!) between the computer and phone icons do not symbolise unable to connect to pc. It means something like "the phone needs to be connected to the computer to flash another firmware."
dheeraj (dhlalit11) said:
take it as second download mode
just connect it with Odin and flash the firmware
this normally happens when flashing process is interrupted
Click to expand...
Click to collapse
i ve tried that earlier.. but it says..' odin has stopped working'.... after clicking start in odin
use different firmware or odin
dheeraj (dhlalit11) said:
use different firmware or odin
Click to expand...
Click to collapse
it happened to me last week,,, try another usb port,,, or another computer,,,
vinup dasari said:
this is d screen i get wen i try to restart d fone..... please help
Click to expand...
Click to collapse
Bro, Don't worryYou can have it working. The exact scenario happened with me too. It happens when you enter in download mode & then due to some reason, you try to switch it on normally. In such case, it won't open either normally or in recovery, but only in Download Mode. So, remove battery, insert it again & press the Download Mode combo keys to enter download mode (Download mode works in such cases) & follow these guidelines:-
1. If odin is crashing, try another pc.
2. If odin is not recognizing your device even when correct drivers are installed, Then check the name of OPS file. For MINI it should be "Tass_v1.0.ops" (without quotes). Note that, device model number appears in Odin's Title Bar.
3. After that If Odin is hanging in btw (for ex: in setup connection), try another USB port.
5. If still problem persists, try another stock firmware.
6. If firmware update is successful and phone bootloops, remove battery, go to stock recovery mode & wipe data/factory reset. Then, wipe cache.
If you implement these correctly, it's 100% gauranteed that your phone should be normal.
Your problem should be solved by then.
Sent Via XDA™ Premium

i can't go into recovery or download mode after flashing

Hi,
could anyone help!
my device is galaxy ace s5830i
i have already rooted my device and used CW Recovery and taken a copy of my original system .oki
i wanted to set up a custom rom i restarted and reset and deleted the cash then installed the rom.
i think it was Retribution beta
then i wanted to update to that custom rom (MindCR ICS)
all i did i restarted my phone of course went into R mode and reset and deleted the cash then installed that next custom rom .
after installing completed when i rebooted it only gave me (samsung galaxy ace s5830i) logo and doesn't open the system when i restart it doesn't go into recovery or download mode it only gives me again the same logo.
even when i press long power button it shuts down and opens automatically.
is there any help knowing that i have already taken a copy of my system.
dana25 said:
After installing completed when i rebooted it only gave me (samsung galaxy ace s5830i) logo and doesn't open the system when i restart it doesn't go into recovery or download mode it only gives me again the same logo.
even when i press long power button it shuts down and opens automatically.
is there any help knowing that i have already taken a copy of my system.
Click to expand...
Click to collapse
I think you have a hard brick.....
Maybe JIG / JTAG can help.
Sent from my GT-S5830i using xda premium
RubenStauttener said:
I think you have a hard brick.....
Maybe JIG / JTAG can help.
Sent from my GT-S5830i using xda premium
Click to expand...
Click to collapse
would you provide me with that or tell me how?
dana25 said:
Hi,
could anyone help!
my device is galaxy ace s5830i
i have already rooted my device and used CW Recovery and taken a copy of my original system .oki
i wanted to set up a custom rom i restarted and reset and deleted the cash then installed the rom.
i think it was Retribution beta
then i wanted to update to that custom rom (MindCR ICS)
all i did i restarted my phone of course went into R mode and reset and deleted the cash then installed that next custom rom .
after installing completed when i rebooted it only gave me (samsung galaxy ace s5830i) logo and doesn't open the system when i restart it doesn't go into recovery or download mode it only gives me again the same logo.
even when i press long power button it shuts down and opens automatically.
is there any help knowing that i have already taken a copy of my system.
Click to expand...
Click to collapse
I have this problem before and i managed to use ODIN3 v1.83 (can use Odin3 v3.07) to detect my phone and flash a stock rom onto the device. I followed the advice given on this excellent thread by Supermini.
http://forum.xda-developers.com/showthread.php?t=1071970
As mentioned on his thread make sure you have the latest stock firmware from the sammobile site or by using Check Fus Downloader as per the guide in Rafael thread http://forum.xda-developers.com/showthread.php?t=1551156, a working samsung USB driver to detect your mobile on your PC and a copy of ODIN3 v1.83 (or v1.84, v1.87, v3.07 run ODIN in administrator mode if using in windows). Ultimately if this this fails you could always try a USB jig which can be purchased from ebay, etc. to get the phone into download mode.
Good luck and if this helps make sure you send a thank you to Supermini.
Viprdxd said:
I have this problem before and i managed to use ODIN3 v1.83 (can use Odin3 v3.07) to detect my phone and flash a stock rom onto the device. I followed the advice given on this excellent thread by Supermini.
http://forum.xda-developers.com/showthread.php?t=1071970
As mentioned on his thread make sure you have the latest stock firmware from the sammobile site or by using Check Fus Downloader as per the guide in Rafael thread http://forum.xda-developers.com/showthread.php?t=1551156, a working samsung USB driver to detect your mobile on your PC and a copy of ODIN3 v1.83 (or v1.84, v1.87, v3.07 run ODIN in administrator mode if using in windows). Ultimately if this this fails you could always try a USB jig which can be purchased from ebay, etc. to get the phone into download mode.
Good luck and if this helps make sure you send a thank you to Supermini.
Click to expand...
Click to collapse
thanks and sorry for late but as i told you i cant go into rev or download mode i tried to use odin 1.8 and the latest version but it doesn't recognize my phone shall i lose hope!
bro i think u most probably bricked ur phone but dont worry try opening download mode. then using the odin u install ur stock rom. Then u can access ur r mode. but try to read the entire procedure..of flashing the rom.
dana25 said:
thanks and sorry for late but as i told you i cant go into rev or download mode i tried to use odin 1.8 and the latest version but it doesn't recognize my phone shall i lose hope!
Click to expand...
Click to collapse
So . . . last thing to rescue your phone is buy on e-bay or in other place JIG if it isn't help you then try in phone service and say you tried install new ROM with Kies and your phone is brick (maybe it'll work).
Say to Service Centre Representatives that you kept your at charging last night
And when you woke up
It was not booting up
Pretend as if you dunno anything about root or ROM
They fixed my bricked phone
I am not sure if I am breaking any forum rule by telling this
Hey bro sorry for the late reply also, please before you do anything else try following my instructions.
1) download Odin v3.07
2) source the stock firmware you want to flash from sammobile.
3) make sure you have the Samsung mobile driver.
4) open and run Odin as administrator and load the single file in the PDA and highlight the tick box.
5) shut the phone down and take out your Sim card.
6) put the mobile into download mode as normal (press both up/down vol keys +power)
7) connect the phone to the PC and check in Odin to make sure its com port is detected.
8) then flash through Odin as normal.
I understand what your saying about no download screen appearing, I have found through experience that custom kernels can cause no download screen to appear. Normally with stock kernel this is not a problem but with custom kernels sometimes all you get is a black screen. Ignore this and just make sure that Odin is detecting the phone and try to flash, chances are it will flash the stock ROM and kernel. If you get the setup connection error in Odin and the fail 0\1 just try another USB port on your PC and keep persevering.
Please keep us updated so we can help you if you need it.
Sent from my Nexus 7 using xda app-developers app
Why will it be hardbricked if the custom roms are based on s5830i stock roms?
But it is probable that we did I not flash the rom properly as per procedure..so is there a chance that it be bricked? Else the rom may have some problem... just telling the probability
Sent from my GT-S5830i using xda premium
Help me .
help me on fixing my ace s5830i , my problem is after flashing it with RazoDroiD my phone seems to be ok , i decided to change my firmware by a stockrom using Odin mode or the Volume Up+Down+On off it stays on blank screen . Can you help me on fixing this ? and what do you call this problem .
Try following my instructions.
1) download Odin v3.07
2) source the stock firmware you want to flash from sammobile.
3) make sure you have the Samsung mobile driver.
4) open and run Odin as administrator and load the single file in the PDA and highlight the tick box.
5) shut the phone down and take out your Sim card.
6) put the mobile into download mode as normal (press both up/down vol keys +power)
7) connect the phone to the PC and check in Odin to make sure its com port is detected.
8) then flash through Odin as normal.
I understand what your saying about no download screen appearing, I have found through experience that custom kernels can cause no download screen to appear. Normally with stock kernel this is not a problem but with custom kernels sometimes all you get is a black screen. Ignore this and just make sure that Odin is detecting the phone and try to flash, chances are it will flash the stock ROM and kernel. If you get the setup connection error in Odin and the fail 0\1 just try another USB port on your PC and keep persevering.
Follow this and don't worry about black screen just make sure Odin detects your PC com port.
Sent from my Nexus 7 using xda app-developers app

samsung galaxy mini 2 GT-S6500 always in download mode

who can help me ?
why my samsung galaxy mini 2 GT-S6500 cannot open recovery mode and always boot to download mode ? who can help me fix it ?
jiesheng06 said:
who can help me ?
why my samsung galaxy mini 2 GT-S6500 cannot open recovery mode and always boot to download mode ? who can help me fix it ?
Click to expand...
Click to collapse
If your phone stays in download mode flash it through odin and revive it... Also instructions are provided by Google so please search "flash galaxy mini 2 gingerbread odin".
Sent from my Galaxy mini using Tapatalk 2
ashu.bigsmoke said:
If your phone stays in download mode flash it through odin and revive it... Also instructions are provided by Google so please search "flash galaxy mini 2 gingerbread odin".
Sent from my Galaxy mini using Tapatalk 2
Click to expand...
Click to collapse
but odin cannot connet to my phone why will like tis ? how can fix it ?
ashu.bigsmoke said:
If your phone stays in download mode flash it through odin and revive it... Also instructions are provided by Google so please search "flash galaxy mini 2 gingerbread odin".
Sent from my Galaxy mini using Tapatalk 2
Click to expand...
Click to collapse
me go google type flash galaxy mini2 gingerbread odin , it is tell me how to root samsung galaxy mini 2 , but me root aready , my problem is when me boot phone , it will auto go to download mode and cannot open recovery mode , and me use odin flash again recovery mode , the odin no connet to the phone , me flash it always fail
Have you installed Kies? You need to install Samsung drivers on your PC for the phone to be able to connect.
LiskatFlow said:
Have you installed Kies? You need to install Samsung drivers on your PC for the phone to be able to connect.
Click to expand...
Click to collapse
if is samsung kies , me gt , my phone n my pc aslo gt but me dun know how 2 connet it, because the phone always in download mode , cannot connet 2 pcme dun know how 2 connet -.- can teach me ?
jiesheng06 said:
who can help me ?
why my samsung galaxy mini 2 GT-S6500 cannot open recovery mode and always boot to download mode ? who can help me fix it ?
Click to expand...
Click to collapse
Have u done something b4.
Sent Via XDA™ Premium
Galaxy_Rohit said:
Have u done something b4.
Sent Via XDA™ Premium
Click to expand...
Click to collapse
install zip , tat zip is for fix cm9 wifi and bluetooth problem de
Once it enter download mode, it can't b turned on either normally or in recovery. So,
*Download exact gingerbread firmware of ur country and mobile drivers for ur model no. and flash guide (visit www.samfirmware.com)
*Install drivers on pc.
*Open odin.
*Flash the f/w by following the flash guide.
*Done.
If however, ur phone still goes to download mode when u press power button, then it might be the malfunctioning of ur phone's hardware keys (that helps enter download mode). So, give it to service center for repairing coz u can't do more than this…
Sent Via XDA™ Premium
Galaxy_Rohit said:
Once it enter download mode, it can't b turned on either normally or in recovery. So,
*Download exact gingerbread firmware of ur country and mobile drivers for ur model no. and flash guide (visit www.samfirmware.com)
*Install drivers on pc.
*Open odin.
*Flash the f/w by following the flash guide.
*Done.
If however, ur phone still goes to download mode when u press power button, then it might be the malfunctioning of ur phone's hardware keys (that helps enter download mode). So, give it to service center for repairing coz u can't do more than this…
Sent Via XDA™ Premium
Click to expand...
Click to collapse
when me ectract the zip , me gt see 2 ting , flash all 2 or tat md5 onli ? and put it wat side ? at PDA side ? tat SS.DL.dll ting cannot flash it-.- me flash the zip file , the odin will not responding
Galaxy_Rohit said:
Once it enter download mode, it can't b turned on either normally or in recovery. So,
*Download exact gingerbread firmware of ur country and mobile drivers for ur model no. and flash guide (visit www.samfirmware.com)
*Install drivers on pc.
*Open odin.
*Flash the f/w by following the flash guide.
*Done.
If however, ur phone still goes to download mode when u press power button, then it might be the malfunctioning of ur phone's hardware keys (that helps enter download mode). So, give it to service center for repairing coz u can't do more than this…
Sent Via XDA™ Premium
Click to expand...
Click to collapse
when me flash finish tat md5 file , the samsung galaxy mini 2 go reboot , i see boot animation , when the boot animation finish , than it will always reapet the boot animation , and cannot go in...
jiesheng06 said:
when me flash finish tat md5 file , the samsung galaxy mini 2 go reboot , i see boot animation , when the boot animation finish , than it will always reapet the boot animation , and cannot go in...
Click to expand...
Click to collapse
It seems that Download Mode problem no longer exists(i.e. solved). Hmm... ur phone is bootlooping now. Do this:-
1. Take out & then re-insert bettery.
2. Goto Recovery mode.
3. Wipe data/factory reset.
4. Wipe cache.
5. Reboot system now.
Done.:thumbup:
U may press thnks if u want
Sent Via XDA™ Premium
Galaxy_Rohit said:
It seems that Download Mode problem no longer exists(i.e. solved). Hmm... ur phone is bootlooping now. Do this:-
1. Take out & then re-insert bettery.
2. Goto Recovery mode.
3. Wipe data/factory reset.
4. Wipe cache.
5. Reboot system now.
Done.:thumbup:
U may press thnks if u want
Sent Via XDA™ Premium
Click to expand...
Click to collapse
me gt try it , but aslo cannot go to recovery mode -.-
Galaxy_Rohit said:
It seems that Download Mode problem no longer exists(i.e. solved). Hmm... ur phone is bootlooping now. Do this:-
1. Take out & then re-insert bettery.
2. Goto Recovery mode.
3. Wipe data/factory reset.
4. Wipe cache.
5. Reboot system now.
Done.:thumbup:
U may press thnks if u want
Sent Via XDA™ Premium
Click to expand...
Click to collapse
juz now , me try it again , finally , my samsung galaxy mini 2 boot normaly , thx for your help
jiesheng06 said:
juz now , me try it again , finally , my samsung galaxy mini 2 boot normaly , thx for your help
Click to expand...
Click to collapse
Finally...!!! You made it...:thumbup:
Add "Solved" tag then, so that others may benefit.
Sent Via XDA™ Premium

Categories

Resources