Database Develop

[Q] My phone is stuck in Galaxy note N7000 screen, can´t enter to recovery mode

Ok, so I Flash rocket rom on my note and when i rebooted the phone it stucks on the screen of samsung galaxy note, i can not enter to CMW mode so i can do anything...What do i do? i think i just screw up my cellphone please help me

Probably get a usb jig. Take your battery off.. Insert battery and connect jig. Your phone will boot into download mode. Then remove jig and connect your data cable and flash any stock Rom via odin
Sent from my GT-N7000

Pactalix said:
Ok, so I Flash rocket rom on my note and when i rebooted the phone it stucks on the screen of samsung galaxy note, i can not enter to CMW mode so i can do anything...What do i do? i think i just screw up my cellphone please help me
Click to expand...
Click to collapse
Try to enter download mode and then flash a stock rom with odin.

aibo said:
Try to enter download mode and then flash a stock rom with odin.
Click to expand...
Click to collapse
Well, i can enter to download mode in the cellphone, but i dont know what i have to do, sorry im a noob :/ can you explain me??

download odin for the pc and a stock rom and flash it

Pactalix said:
Well, i can enter to download mode in the cellphone, but i dont know what i have to do, sorry im a noob :/ can you explain me??
Click to expand...
Click to collapse
Go to this site http://www.sammobile.com/firmware/?page=3 and you will find Odin 1.85. Firmware for your country/region and flashguide. Register first, it`s free
It`s not so hard: download Odin 1.85, download the right firmware.
Put the firmware in PDA in Odin, close Kies and kies trayagent and PDLR in your windows toolbar (rightclick and go to taskmanager), put your phone in downloadmode, connect with computer and when you see ADDED in the left corner window of Odin and the the ID.com left upper window turns yellow press start and flash and let it boot. Done

http://forum.xda-developers.com/showthread.php?t=1160580

gee2012 said:
Go to this site and you will find Odin 1.85. Firmware for your country/region and flashguide. Register first, it`s free
It`s not so hard: download Odin 1.85, download the right firmware.
Put the firmware in PDA in Odin, close Kies and kies trayagent and PDLR in your windows toolbar (rightclick and go to taskmanager), put your phone in downloadmode, connect with computer and when you see ADDED in the left corner window of Odin and the the ID.com left upper window turns yellow press start and flash and let it boot. Done
Click to expand...
Click to collapse
The only firmware that I see for the note is the one from Honk Kong...I´m from Mexico, that matters? D:

now do little more effort, n type N7000 in search field, If you dont know it then simply
Go here http://forum.xda-developers.com/showthread.php?t=1424997

This happened to mee to once... I yanked the battery 10 minutes... Then suddenly i could get into recovery again.....try it....
Sent from my GT-N7000 using Xparent Blue Tapatalk

and i have the same problem... stuck on the SGN7000 screen with yellow triangle. ALSO can't get into recovery mode...
Hence, i was told to use odin1.85 to flash back the stock rom.... during the progress... it stuck on factoryfs.img
have did some battery pull for 5-10mins, use different pc, different usb cable... also no use.
Does that means i need to pay samsung to restore back for me?

Hello guys, even I am stuck factoryfs.img when trying to flash stock ROM.
I bricked my phone trying to install rocket ROM ICS.
I am using PC ODIN and LA5 firmware, I tired KL3 too, but no luck. I am just stuck at around 95% with odin saying flashing factoryfs.img.
PLEASE HELP

If you are able to enter recover, wipe cache, wipe delvic cache, wipe off data
then reflash

I am not able to enter into recovery. Only download mode is working, but when trying to flash the stock rom, it is stuck at factoryfs.img.

You may try different ROM
Sent from my GT-N7000 using xda premium

dr.ketan said:
You may try different ROM
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
any particular suggestion? Or should I take it to the servicing center? Would they charge me ?

happen to me once..thanx to dr. ketan n some user that guide me..like dr ketan said..u can try different rom and make sure u use the main usb port(if u use desktop)the one at the back...

anilisanil said:
any particular suggestion? Or should I take it to the servicing center? Would they charge me ?
Click to expand...
Click to collapse
Not specific, you select any different, n as balok said connect directly to usb port, n close if antivirus running. Better download rom without antivirus, some time antivirus can cause problem, if any component of rom falsely consider as trojan.
Sent from my GT-N7000 using xda premium

anilisanil said:
I am not able to enter into recovery. Only download mode is working, but when trying to flash the stock rom, it is stuck at factoryfs.img.
Click to expand...
Click to collapse
have got myself into CWM Recovery finally after flashing the FM Kernel v2 with Odin PC... BUT my previous backup (darkyROM) got errors while restoring even i wanna do a fresh flash on DarkyROM, it just stuck on halfway (symlinking....)

edwtw4u said:
and i have the same problem... stuck on the SGN7000 screen with yellow triangle. ALSO can't get into recovery mode...
Hence, i was told to use odin1.85 to flash back the stock rom.... during the progress... it stuck on factoryfs.img
have did some battery pull for 5-10mins, use different pc, different usb cable... also no use.
Does that means i need to pay samsung to restore back for me?
Click to expand...
Click to collapse
SAME HERE Spending hours but no use....PLEASE HELP!

Restarting problem

Hello,my Samsung galaxy s is restarting constantly it started today after my phone frozen and I took out the battery after it booted it just showed Samsung logo and then goes to devil kernel logo after that just stays there and wont boot up and then restarts.I tried getting into recovery mode but it doesn't want to,only download mode works but phone doesn't get recognized by PC so cant do anything.
EDIT
When I charge the phone battery icon isn't showing like its charging it just shows empty battery and spinning indicator is frozen.

Seems like you have overclocked your phone too much or undervolted too much. What you need to do is go to cwm recovery and install a different kernel and see if it works.
Sent from my GT-I9000 using XDA

I cant because my phone wont get in recovery mode,only download mode works but phone isn't recognized when plugged into PC.

ivanzu said:
I cant because my phone wont get in recovery mode,only download mode works but phone isn't recognized when plugged into PC.
Click to expand...
Click to collapse
Okay. Put the phone in download mode, ope odin on your pc then connect your phone to the pc and let me know if its recognized
Sent from my GT-I9000 using XDA

Its recognized so what firmware/pit should I download?Do i need to take out SD card and sim card?

ivanzu said:
Its recognized so what firmware/pit should I download?Do i need to take out SD card and sim card?
Click to expand...
Click to collapse
Search up how to flash stock rom via odin
Sent from my GT-I9000 using XDA

Did you fix the problem?
Sent from my GT-I9000 using XDA

Not yet going to try that later today.

To flash a kernel put your galaxy into download mode, connect via cable to pc, start odin, select in PDA a *.tar file and flash!
here you can download semaphore kernel for ICS Roms:
http://www.semaphore.gr/downloads/gt-i9000-ics
good luck!

Odin fixed the restarting problem,but now when i get in recovery mode its giving unknown volume and cant mount sd card error so is there anyway to install rom via odin?

ivanzu said:
Odin fixed the restarting problem,but now when i get in recovery mode its giving unknown volume and cant mount sd card error so is there anyway to install rom via odin?
Click to expand...
Click to collapse
LOL man just go find a firmware on sammobile.com (find JVK one) download it, put the phone into download mode, connect to odin. Put the biggest file thats in the firmware zip as PDA, CSC in csc ect. Tick "repatriation" "f reset time" and flash it. Then root it via CF-Root. (Find it on XDA - i hope you're able to do that) then itll all be good
Sent from my GT-I9000 using XDA

i've got the exact same problem as the above mentioned. is there any help for us?
i downloaded the zip from sammobile.com already, but i just have 2 files in the zip: JVI_JV2_JVO.tar and SS_DL.dll.
i wonder how i should put csc in csc etc.
any help out there?

like i said i had the same issue.
to resolve it just follow this thread http://forum.xda-developers.com/showthread.php?t=1665643

[Q] Help. Bricked?

Hi, a friend of mine tried upgrading from Froyo to Gingerbread on his phone. I used ODIN for him in download mode and tried flashing 2.3.4 DXKPD firmware (Singapore). After flashing, his phone would not boot up. It shows a black screen (with some backlight), and nothing else. Then I tried to open download mode and reflash the thing again and it says PASS but it still doesn't boot up. After leaving the phone there for awhile, we realised that we could only occasionally go into download mode, and nothing shows up on the screen but ODIN detects it alright.
After that, I tried reflashing it again and now it's stuck at setup connection in ODIN. Somebody help? Is it a hard brick? What can I do?
PS: His warranty has already expired I think.

if you can go into download mode its not hard brick
try flashing other firmware like xxkpk or ddkq7

dheeraj (dhlalit11) said:
if you can go into download mode its not hard brick
try flashing other firmware like xxkpk or ddkq7
Click to expand...
Click to collapse
Okay... But now when I press the download mode key-combination (vol down+power+home), nothing shows up on the screen but occassionally the phone is detected in ODIN, but the flashing doesn't get past setup connection. So what could be the problem, and would flashing other firmware solve it?

Maybe try a different version of odin?
Sent from my GT-S5570 using xda premium

hi,
try removing and reinserting the battery before pressing the button combo. and the firmware package you used, is it one package or multiple files?
i think you will need multiple files ( boot, phone pda and csc ).

sachin273 said:
hi,
try removing and reinserting the battery before pressing the button combo. and the firmware package you used, is it one package or multiple files?
i think you will need multiple files ( boot, phone pda and csc ).
Click to expand...
Click to collapse
You need multiple files for flashing to gingerbread from froyo? I was using one package.

you should use the four package and do not use bootloader removed firmware until you are not gb

tietganFTW said:
You need multiple files for flashing to gingerbread from froyo? I was using one package.
Click to expand...
Click to collapse
Yes you do. download the multi package (any region would do) and flash it. once the phone boots, flash it with the single package for your region so that the date and time are automatically updated via the SIM card. hope this helps you. One more thing, from windows task manger close KIES related processes if you see them.
regards.

sachin273 said:
Yes you do. download the multi package (any region would do) and flash it. once the phone boots, flash it with the single package for your region so that the date and time are automatically updated via the SIM card. hope this helps you. One more thing, from windows task manger close KIES related processes if you see them.
regards.
Click to expand...
Click to collapse
Aight, thanks. I'll try again and post the results.

Alright, in my attempt to flash via ODIN again, I realised that the phone is not going into download mode anymore. When I plug it in to my USB, I can see that the backlight turns on but nothing shows on the screen. So I tried the following:
1. Taking out my battery, pressing the button combination for download mode, and putting the battery back in while holding the buttons
Result: nothing happened, the backlight wouldn't even turn on now.
2. Plugging out USB cable, pressing button combination and putting USB cable back in while holding the buttons
Result: nothing happened too, backlight also wouldn't even turn on.
Now I think it's bricked, and can somebody help me?
EDIT:
Or at least confirm that it's bricked with the symptoms.

try using a jig then

dheeraj (dhlalit11) said:
try using a jig then
Click to expand...
Click to collapse
Where do I buy a jig from? Never used one before, or never had to use one before. Do you think electronics shops sells them? i don't wanna buy online btw.

local repair shops keeps at least one ask them to make the mobile boot into download mode

i can't go into recovery or download mode after flashing

Hi,
could anyone help!
my device is galaxy ace s5830i
i have already rooted my device and used CW Recovery and taken a copy of my original system .oki
i wanted to set up a custom rom i restarted and reset and deleted the cash then installed the rom.
i think it was Retribution beta
then i wanted to update to that custom rom (MindCR ICS)
all i did i restarted my phone of course went into R mode and reset and deleted the cash then installed that next custom rom .
after installing completed when i rebooted it only gave me (samsung galaxy ace s5830i) logo and doesn't open the system when i restart it doesn't go into recovery or download mode it only gives me again the same logo.
even when i press long power button it shuts down and opens automatically.
is there any help knowing that i have already taken a copy of my system.

dana25 said:
After installing completed when i rebooted it only gave me (samsung galaxy ace s5830i) logo and doesn't open the system when i restart it doesn't go into recovery or download mode it only gives me again the same logo.
even when i press long power button it shuts down and opens automatically.
is there any help knowing that i have already taken a copy of my system.
Click to expand...
Click to collapse
I think you have a hard brick.....
Maybe JIG / JTAG can help.
Sent from my GT-S5830i using xda premium

RubenStauttener said:
I think you have a hard brick.....
Maybe JIG / JTAG can help.
Sent from my GT-S5830i using xda premium
Click to expand...
Click to collapse
would you provide me with that or tell me how?

dana25 said:
Hi,
could anyone help!
my device is galaxy ace s5830i
i have already rooted my device and used CW Recovery and taken a copy of my original system .oki
i wanted to set up a custom rom i restarted and reset and deleted the cash then installed the rom.
i think it was Retribution beta
then i wanted to update to that custom rom (MindCR ICS)
all i did i restarted my phone of course went into R mode and reset and deleted the cash then installed that next custom rom .
after installing completed when i rebooted it only gave me (samsung galaxy ace s5830i) logo and doesn't open the system when i restart it doesn't go into recovery or download mode it only gives me again the same logo.
even when i press long power button it shuts down and opens automatically.
is there any help knowing that i have already taken a copy of my system.
Click to expand...
Click to collapse
I have this problem before and i managed to use ODIN3 v1.83 (can use Odin3 v3.07) to detect my phone and flash a stock rom onto the device. I followed the advice given on this excellent thread by Supermini.
http://forum.xda-developers.com/showthread.php?t=1071970
As mentioned on his thread make sure you have the latest stock firmware from the sammobile site or by using Check Fus Downloader as per the guide in Rafael thread http://forum.xda-developers.com/showthread.php?t=1551156, a working samsung USB driver to detect your mobile on your PC and a copy of ODIN3 v1.83 (or v1.84, v1.87, v3.07 run ODIN in administrator mode if using in windows). Ultimately if this this fails you could always try a USB jig which can be purchased from ebay, etc. to get the phone into download mode.
Good luck and if this helps make sure you send a thank you to Supermini.

Viprdxd said:
I have this problem before and i managed to use ODIN3 v1.83 (can use Odin3 v3.07) to detect my phone and flash a stock rom onto the device. I followed the advice given on this excellent thread by Supermini.
http://forum.xda-developers.com/showthread.php?t=1071970
As mentioned on his thread make sure you have the latest stock firmware from the sammobile site or by using Check Fus Downloader as per the guide in Rafael thread http://forum.xda-developers.com/showthread.php?t=1551156, a working samsung USB driver to detect your mobile on your PC and a copy of ODIN3 v1.83 (or v1.84, v1.87, v3.07 run ODIN in administrator mode if using in windows). Ultimately if this this fails you could always try a USB jig which can be purchased from ebay, etc. to get the phone into download mode.
Good luck and if this helps make sure you send a thank you to Supermini.
Click to expand...
Click to collapse
thanks and sorry for late but as i told you i cant go into rev or download mode i tried to use odin 1.8 and the latest version but it doesn't recognize my phone shall i lose hope!

bro i think u most probably bricked ur phone but dont worry try opening download mode. then using the odin u install ur stock rom. Then u can access ur r mode. but try to read the entire procedure..of flashing the rom.

dana25 said:
thanks and sorry for late but as i told you i cant go into rev or download mode i tried to use odin 1.8 and the latest version but it doesn't recognize my phone shall i lose hope!
Click to expand...
Click to collapse
So . . . last thing to rescue your phone is buy on e-bay or in other place JIG if it isn't help you then try in phone service and say you tried install new ROM with Kies and your phone is brick (maybe it'll work).

Say to Service Centre Representatives that you kept your at charging last night
And when you woke up
It was not booting up
Pretend as if you dunno anything about root or ROM
They fixed my bricked phone
I am not sure if I am breaking any forum rule by telling this

Hey bro sorry for the late reply also, please before you do anything else try following my instructions.
1) download Odin v3.07
2) source the stock firmware you want to flash from sammobile.
3) make sure you have the Samsung mobile driver.
4) open and run Odin as administrator and load the single file in the PDA and highlight the tick box.
5) shut the phone down and take out your Sim card.
6) put the mobile into download mode as normal (press both up/down vol keys +power)
7) connect the phone to the PC and check in Odin to make sure its com port is detected.
8) then flash through Odin as normal.
I understand what your saying about no download screen appearing, I have found through experience that custom kernels can cause no download screen to appear. Normally with stock kernel this is not a problem but with custom kernels sometimes all you get is a black screen. Ignore this and just make sure that Odin is detecting the phone and try to flash, chances are it will flash the stock ROM and kernel. If you get the setup connection error in Odin and the fail 0\1 just try another USB port on your PC and keep persevering.
Please keep us updated so we can help you if you need it.
Sent from my Nexus 7 using xda app-developers app

Why will it be hardbricked if the custom roms are based on s5830i stock roms?

But it is probable that we did I not flash the rom properly as per procedure..so is there a chance that it be bricked? Else the rom may have some problem... just telling the probability
Sent from my GT-S5830i using xda premium

Help me .
help me on fixing my ace s5830i , my problem is after flashing it with RazoDroiD my phone seems to be ok , i decided to change my firmware by a stockrom using Odin mode or the Volume Up+Down+On off it stays on blank screen . Can you help me on fixing this ? and what do you call this problem .

Try following my instructions.
1) download Odin v3.07
2) source the stock firmware you want to flash from sammobile.
3) make sure you have the Samsung mobile driver.
4) open and run Odin as administrator and load the single file in the PDA and highlight the tick box.
5) shut the phone down and take out your Sim card.
6) put the mobile into download mode as normal (press both up/down vol keys +power)
7) connect the phone to the PC and check in Odin to make sure its com port is detected.
8) then flash through Odin as normal.
I understand what your saying about no download screen appearing, I have found through experience that custom kernels can cause no download screen to appear. Normally with stock kernel this is not a problem but with custom kernels sometimes all you get is a black screen. Ignore this and just make sure that Odin is detecting the phone and try to flash, chances are it will flash the stock ROM and kernel. If you get the setup connection error in Odin and the fail 0\1 just try another USB port on your PC and keep persevering.
Follow this and don't worry about black screen just make sure Odin detects your PC com port.
Sent from my Nexus 7 using xda app-developers app

[Q]What should I do? (Bricked Phone)

Hello, this is my first post, but no one cares. Right?
I have a little story... Today I tried to Upgrade from CM 10.1 to CM 10.2 but I had a little problem. Because I wanted to have a fresh instalation I first tried to flash with ODIN 3.0.4 official 2.3.6. In the middle of instalation... I had a power outage for 5 seconds. Now my problem is:
1. It can't enter Recovery;
2. It can't enter Download Mode;
3. It can't boot System.
When i plug the usb cable, it shows me this message: "Firmware upgrade encountered an issue. Please select recovery mode in kies and try again. ", but that's a little strange because I don't even have Kies installed on PC. This is the only scree I can see.
I don't know how, but somehow I entered Download Mode for 5-10 seconds, but my PC doesn't recognize my phone. After that the phone just shuted down.
I already browse all topics about soft brick, but nothing helped me...
Before take my phone to a service, what are my other choices?

DanuTzCarbon said:
Hello, this is my first post, but no one cares. Right?
I have a little story... Today I tried to Upgrade from CM 10.1 to CM 10.2 but I had a little problem. Because I wanted to have a fresh instalation I first tried to flash with ODIN 3.0.4 official 2.3.6. In the middle of instalation... I had a power outage for 5 seconds. Now my problem is:
1. It can't enter Recovery;
2. It can't enter Download Mode;
3. It can't boot System.
When i plug the usb cable, it shows me this message: "Firmware upgrade encountered an issue. Please select recovery mode in kies and try again. ", but that's a little strange because I don't even have Kies installed on PC. This is the only scree I can see.
I don't know how, but somehow I entered Download Mode for 5-10 seconds, but my PC doesn't recognize my phone. After that the phone just shuted down.
I already browse all topics about soft brick, but nothing helped me...
Before take my phone to a service, what are my other choices?
Click to expand...
Click to collapse
Sorry my friend only samsung can help you!!!
Sent from my GT-S5570 using xda premium

uninstall your kies. then install samsung usb driver.
then odin your phone.

dzeig said:
uninstall your kies. then install samsung usb driver.
then odin your phone.
Click to expand...
Click to collapse
I can't enter Download Mode and I haven't KIES installed.

Since you had a power outbreak during Odin flashing, it might not fully flash the bootloader (boot.img file), or the fat.bin file, both of them are essential for proper phone operation.
Install Kies, and try the recovery mode in it, see if it works.
Also, try to charge your battery, maybe this will help somehow.
If nothing works, service is your only option, as you cannot manually repair a partially flashed boot.img or fat.bin.

boot.img is not bootloader,

Boot.img is kernel
Tapnięte z mojego mini 2

MrMateczko said:
Since you had a power outbreak during Odin flashing, it might not fully flash the bootloader (boot.img file), or the fat.bin file, both of them are essential for proper phone operation.
Install Kies, and try the recovery mode in it, see if it works.
Also, try to charge your battery, maybe this will help somehow.
If nothing works, service is your only option, as you cannot manually repair a partially flashed boot.img or fat.bin.
Click to expand...
Click to collapse
Well, I installed Kies.
I can't use "Emergency firmware recovery" because my PC doesn't recognize my phone.
I can't use "Firmware Upgrade and Initialisation". When I enter the details about my phone I get "'GT-S6500D' does not support initializing.".
I don't think I have other option in Kies...

Another problem:
My phone is absolutely unresponsive.
Maybe because of battery.
I can't charge it. I have a friend with S6500D...
I will try with he's battery.
Maybe I could try some tricks to enter in Download Mode. (God, please help me!!)

Instal drivers and go to download mode !
Tapnięte z mojego mini 2

hheelloo said:
Instal drivers and go to download mode !
Tapnięte z mojego mini 2
Click to expand...
Click to collapse
I have drivers. Isn't that the problem. And I said I can't enter Download Mode.

Sorry but your phone is hard bricked so you can't fix your phone yourself.You have to send it to samsung to fix it.The hard brick was caused by failed bootloader update.But if you have power surges i recommend you to flash your phone from a laptop.

darkshadow1997 said:
Sorry but your phone is hard bricked so you can't fix your phone yourself.You have to send it to samsung to fix it.The hard brick was caused by failed bootloader update.But if you have power surges i recommend you to flash your phone from a laptop or flash stock rom with bootloader removed link:http://forum.xda-developers.com/showthread.php?t=1551586
Click to expand...
Click to collapse
Thanks for the advice.

Please ignore the link to stock firmware without bootloader because i did not know your phone was galaxy mini 2 because sometimes mini 2 questions are posted in mini 1.And i have both mini and mini 2.

If boot.img is not the bootloader (it's the kernel, I'm sorry for telling you wrong before), then why the Download Mode does not work?

darkshadow1997 said:
Please ignore the link to stock firmware without bootloader because i did not know your phone was galaxy mini 2 because sometimes mini 2 questions are posted in mini 1.And i have both mini and mini 2.
Click to expand...
Click to collapse
It doesn't matter... I saw it was for Mini... Anyway download mode still not working so don't worry.
Thanks for the idea of stock firmwares without bootloader... maybe i could edit stock firmwares for my phone.

You can edit stock rom without the risk of hardbrick.just upack your stock rom then delete bootloader then download a software to create tar do not use tar editor because just deleting the bootloader doesn't mean odin will load it maybe because of md5.So did you send your phone to samsung.

darkshadow1997 said:
You can edit stock rom without the risk of hardbrick.just upack your stock rom then delete bootloader then download a software to create tar do not use tar editor because just deleting the bootloader doesn't mean odin will load it maybe because of md5.So did you send your phone to samsung.
Click to expand...
Click to collapse
Well... my brother know a guy who know another guy. This guy have a service or something like that. I sent the phone to him. Maybe he could do something. If not... I will try to find the famous Usb Jig for my model of mini. I found for GT-S5570 but still searching for GT-S6500D

Fixed
Well... I sent my phone to a service but there they could only fix download mode. LOL. They tried to install firmware update, but the phone was stuck in bootloop. From there, I fixed by myself.
I will ask them how did they fix it.