Hi, a friend of mine tried upgrading from Froyo to Gingerbread on his phone. I used ODIN for him in download mode and tried flashing 2.3.4 DXKPD firmware (Singapore). After flashing, his phone would not boot up. It shows a black screen (with some backlight), and nothing else. Then I tried to open download mode and reflash the thing again and it says PASS but it still doesn't boot up. After leaving the phone there for awhile, we realised that we could only occasionally go into download mode, and nothing shows up on the screen but ODIN detects it alright.
After that, I tried reflashing it again and now it's stuck at setup connection in ODIN. Somebody help? Is it a hard brick? What can I do?
PS: His warranty has already expired I think.
if you can go into download mode its not hard brick
try flashing other firmware like xxkpk or ddkq7
dheeraj (dhlalit11) said:
if you can go into download mode its not hard brick
try flashing other firmware like xxkpk or ddkq7
Click to expand...
Click to collapse
Okay... But now when I press the download mode key-combination (vol down+power+home), nothing shows up on the screen but occassionally the phone is detected in ODIN, but the flashing doesn't get past setup connection. So what could be the problem, and would flashing other firmware solve it?
Maybe try a different version of odin?
Sent from my GT-S5570 using xda premium
hi,
try removing and reinserting the battery before pressing the button combo. and the firmware package you used, is it one package or multiple files?
i think you will need multiple files ( boot, phone pda and csc ).
sachin273 said:
hi,
try removing and reinserting the battery before pressing the button combo. and the firmware package you used, is it one package or multiple files?
i think you will need multiple files ( boot, phone pda and csc ).
Click to expand...
Click to collapse
You need multiple files for flashing to gingerbread from froyo? I was using one package.
you should use the four package and do not use bootloader removed firmware until you are not gb
tietganFTW said:
You need multiple files for flashing to gingerbread from froyo? I was using one package.
Click to expand...
Click to collapse
Yes you do. download the multi package (any region would do) and flash it. once the phone boots, flash it with the single package for your region so that the date and time are automatically updated via the SIM card. hope this helps you. One more thing, from windows task manger close KIES related processes if you see them.
regards.
sachin273 said:
Yes you do. download the multi package (any region would do) and flash it. once the phone boots, flash it with the single package for your region so that the date and time are automatically updated via the SIM card. hope this helps you. One more thing, from windows task manger close KIES related processes if you see them.
regards.
Click to expand...
Click to collapse
Aight, thanks. I'll try again and post the results.
Alright, in my attempt to flash via ODIN again, I realised that the phone is not going into download mode anymore. When I plug it in to my USB, I can see that the backlight turns on but nothing shows on the screen. So I tried the following:
1. Taking out my battery, pressing the button combination for download mode, and putting the battery back in while holding the buttons
Result: nothing happened, the backlight wouldn't even turn on now.
2. Plugging out USB cable, pressing button combination and putting USB cable back in while holding the buttons
Result: nothing happened too, backlight also wouldn't even turn on.
Now I think it's bricked, and can somebody help me?
EDIT:
Or at least confirm that it's bricked with the symptoms.
try using a jig then
dheeraj (dhlalit11) said:
try using a jig then
Click to expand...
Click to collapse
Where do I buy a jig from? Never used one before, or never had to use one before. Do you think electronics shops sells them? i don't wanna buy online btw.
local repair shops keeps at least one ask them to make the mobile boot into download mode
Related
I followed instructions on a link via the cyanogenmod website, to try and get cm7 on my phone. The instructions were on a wiki website which I now know is not reliable!
I got to the stage "flashing cyanagonmod" to find out that the zip files had to be in the internal sd card BEFORE starting the whole process!
I can still access download mode and recovery. But my phone gets stuck on the "Samsung galaxy i9000" intro screen.
I tried restoring and factory reset but still no joy...
any help is very appreciated!
Download some odin flashable ROM, and flash that in download mode.
where do I find an odin ROM and how do I know which one to use?
corrected: samfirmware.com
If you want a custom rom, then look through here however your going to have to read which is odin flashable...
This is a guide and rom i have used myself. Click here
BTW this is obviously assuming you are on SGS I9000 the second link should be quite clear...
here's a nice link to finding stock firmwares and using Odin:
http://forum.xda-developers.com/showthread.php?t=1102881
Talon26 said:
samsungfirmware.com
If you want a custom rom, then look through here however your going to have to read which is odin flashable...
This is a guide and rom i have used myself. Click here
BTW this is obviously assuming you are on SGS I9000 the second link should be quite clear...
Click to expand...
Click to collapse
Thanks for your post. Only problem is ODin doesn't recognise when my phone is plugged in? i.e. there isn't that yellow box showing...help!
Ok so im guessing your trying the 3 button combo for download mode (vol up + home + power). Alternatives to force download is a homemade jig, which is easily obtainable from ebay for a relatively cheap price. Other ways you can try is holding the combo for as long as you can, some have reported it may even work after 3 mins. Another method is hold the combo and then whilst holding it insert the battery. Also the last method but have the usb plugged into with odin open, then put the battery in. Many many ways... just search
Is that what you mean or that you CAN get to download mode and Odin and the computer does NOT recognise when you plug it in. If this is try re-installing the drivers using kies, its under the tools menu. Try a different version of odin, plug phone in then try the combo (with battery already in, then without). Have you closed all Kies applications background processes? (use task manager in windows). Use another computer..
Also have you read this
Edit: Forgot to add, can you get into Recovery? Then use your nandroid backup which you should always do before flashing.. If you dont have a back up try use ADB to force download mode "adb reboot download"
Need to know what options you have available in-order to help, what can you do? Is there any response from your phone with pressing buttons or key combinations??
Ok i put my device into download mode with picture then flashed my i9000 with http://forum.xda-developers.com/show....php?t=1160580
i now know this was the wrong FW for my device since then i cannot boot my phone normally nor get into download mode with the picture
it works fine just if i pull battery or turn off the phone
all i get is a black screen with "home & back buttons lit up"
however when i attach my device to odine it recognizes the phone first time
i dont have to do anything, i've tried flashing stock FW
same result black screen buttons lit up no DL mode with pic no boot
i've tried flashing FW with sbl success odine tells me,
no luck again, also when i try to flash 3 files
it always hangs then fails on modem, however if i flash allinone it works
but only boots with odine & not on its own & without samsung boot image
i can flash modem on its own via psa tab with success, i've also tried the jig to get into normal DL mode, but to no avail
also when i plug usb cable in & take out battery phone turns off
its like the usb is not a power source, ive tried on my laptop, ac adapter & pc all same result
to summerise:
i can flash my phone however if i turn off device i it will not boot
on its own & have to reflash via odine but with no boot logo only sounds
im thinking the only solution is samsung service centre but i can hazard a guess the price of a new mobo will prob be the same as the phone its self secondhand on ebay
any ideas? thanks
P.S when i flash 2 or more files i use pit 512, what if i didnt use a pit or used a different one would it make a difference?
P.P.S kies does recognize device once its flashed but cant find any updates on FW
would doing an emergency restore with an .sbu file fix this boot issue?
& where could i get an .sbu file from as i didnt do a backup
Did you also check “repartition“ in odin when you flash with the pit file?
It sounds like you've toasted the bootloader flashing a wrong firmware. But since you can get Odin connected and flash you might be able to recover.
You'll need to flash a stock firmware with bootloaders, Darky RE should have bootloaders. Follow the instructions on the page.
Good luck
In fact if you can't go into DL mode you can use a thing called JIG repair.
you'll need a 300K resistor (which exactly 301K) and a micro-USB plug.
http://mobile-devices-phones.factoidz.com/how-to-unbrick-your-samsung-vibrant-galaxy-s/
It works for me!
Unbrickable mod will fix it.
liraindon said:
Did you also check “repartition“ in odin when you flash with the pit file?
Click to expand...
Click to collapse
odine automatically clicks re-partition when i check a pit file
ansonscleung said:
In fact if you can't go into DL mode you can use a thing called JTAG repair.
you'll need a 300K resistor (which exactly 301K) and a micro-USB plug.
http://mobile-devices-phones.factoidz.com/how-to-unbrick-your-samsung-vibrant-galaxy-s/
It works for me!
Click to expand...
Click to collapse
is this not similar to a jig?
rax22 said:
It sounds like you've toasted the bootloader flashing a wrong firmware. But since you can get Odin connected and flash you might be able to recover.
You'll need to flash a stock firmware with bootloaders, Darky RE should have bootloaders. Follow the instructions on the page.
Good luck
Click to expand...
Click to collapse
ok followed all instructions flashed phone now phone still wont boot gets caught up in a loop keeps saying "welcome to darkyrom 10.2 extreme edition" thats after i powered down device
stevo-p said:
is this not similar to a jig?
Click to expand...
Click to collapse
What ansonscleung linked to is a Jig, Jtag is something completely different all together. If Odin won't recover your phone, I can't guarantee the jig will work. Although it will help getting to download mode and maybe help flashing the proper firmware.
stevo-p said:
ok followed all instructions flashed phone now phone still wont boot gets caught up in a loop keeps saying "welcome to darkyrom 10.2 extreme edition" thats after i powered down device
Click to expand...
Click to collapse
If you can boot into recovery "home + vol up + power", wipe data, and cache and reboot. Might fix it
does anyone have a basic .sbu file with no data on that i could use with kies?
would it work?
clarkey15 said:
What ansonscleung linked to is a Jig, Jtag is something completely different all together. If Odin won't recover your phone, I can't guarantee the jig will work. Although it will help getting to download mode and maybe help flashing the proper firmware.
If you can boot into recovery "home + vol up + power", wipe data, and cache and reboot. Might fix it
Click to expand...
Click to collapse
You're correct, guy. A JIG cost about HK$15.5 ($15 for a Micro USB port and $0.5 resistor) (approx. US$1.99 €1.5 not incl. transportation fee) or spend US$8 here.
Hope you can pass through those stuff and enjoy back your phone!
clarkey15 said:
What ansonscleung linked to is a Jig, Jtag is something completely different all together. If Odin won't recover your phone, I can't guarantee the jig will work. Although it will help getting to download mode and maybe help flashing the proper firmware.
If you can boot into recovery "home + vol up + power", wipe data, and cache and reboot. Might fix it
Click to expand...
Click to collapse
already tried jig, no affect, also i cannot getinto recovery mode also
im assuming im already in download mode as odine recognizes my phone
but i have no pic on phone
Unbrickable mod will fix it.
stevo-p said:
ok followed all instructions flashed phone now phone still wont boot gets caught up in a loop keeps saying "welcome to darkyrom 10.2 extreme edition" thats after i powered down device
Click to expand...
Click to collapse
Do you get the Galaxy S logo when the phone is turned on? If you do then your bootloaders are now OK and you can boot into recovery and flash a CWM ROM.
rax22 said:
Do you get the Galaxy S logo when the phone is turned on? If you do then your bootloaders are now OK and you can boot into recovery and flash a CWM ROM.
Click to expand...
Click to collapse
does my phone have to be rooted to use a cwm rom?
as i never rooted my device
woolf clubs said:
Unbrickable mod will fix it.
Click to expand...
Click to collapse
i've researched that method, i know little about soldering
and asked in a phone shop & they knew nothing about it
so i wouldn't attempt it as i would probably screw it up
stevo-p said:
does my phone have to be rooted to use a cwm rom?
as i never rooted my device
Click to expand...
Click to collapse
also i just re-flashed with darky rom same as before "boot loop with pic & welcome to darkyrom 10.2 extreme edition" so turned off phone
thinking great i finally got a pic on boot......no
turned phone on no pic no sound black screen with buttons lit up
nothing else
Have you tried installing stock firmware with re-partition?
http://forum.xda-developers.com/showthread.php?t=1102881
UPDATE*
i've flashed my phone with
PIT: 512
PDA: PDA_XWJVZ_Sbl.tar
PHONE: PHONE_XXJVT.tar
CSC: CSC_OXXJV9.tar
KERNEL: Semaphore_kernel_JVT_1.8.0.tar
I now have the download mode pic so im thinking great
color is abit off but atleast i had the startup samsung logo
fantastic just turned off phone rebooted it
back to square one, black screen bottom 2 buttons lit up?
Fallen04 said:
Have you tried installing stock firmware with re-partition?
http://forum.xda-developers.com/showthread.php?t=1102881
Click to expand...
Click to collapse
yes multiple stock fw's all work until i turn off device
then try turn on black screen 2 buttons lit up
Hi everyone. Im not normally in this section as i have an x8 but my friend has seen all the roms,mods and updates ive done so he tried to do it to his galaxy s i9000 without rooting or unlocking his bootloader. I asked him what he did he said he just tried to update software with keis but now it wont turn on just white screen with a red triangle in the middle i hope its download mode as i dont have a galaxy i dont really no but the battery has died and it wont charge im guessing hes damaged the bootloader am i right and if so whats the best corse of action to tepair it. Thanks.
You can check if it is in download mode by pluggin it in pc with odin. See the wiki page what it says about soft brick.
Soft-Bricked
After flashing a rom you might not be able to enter the Download Mode by pressing Volume Down + Home + Power. In this case a so called 'JIG' would be helpfull.
You could build it on your own: [HOWTO] [REF] Get Download Mode without 3-button combo using homemade JIG
... or buy a preassembled one on a well known marketplace.Hint: There is no difference between a JIG for Samsung S/S2 or S-Plus.
See if you can go into d0wnload mode with vol down home and power. If that works go and try to find the stock firmware for the phone and download and extract. Download odin and put csc pda and phone/modem in there rightful places. 512 pit in pit section. Pit usually comes with odin download. If not find it somewhere. Repartition checked and hit start. It should reboot when done. It will problaby take a couple of min to boot but be patient. If it starts to go into boot loop put back into download mode again and reflash. Its very hard to mess up the phone to where you cant fix it. So relax and watch tuts or whatever helps you best. I know of a link i that i will find and post for you when i do.
Sent from my GT-I9000 using XDA
http://forum.xda-developers.com/showthread.php?t=1102881
Sent from my GT-I9000 using XDA
DEAD bricked phone
So, my friend's phone (hopefully she'll stay my friend after this) was turning itself on and off all on it's own. So I (no good deed goes unpunished) suggested that I will upgrade her firmware for her. She had 2.3.3 firmware. I downloaded the odin1.7 as well as a package of all the info for 2.3.5 firmware upgrade. I flashed the phone- originally only using the PDA option with a file called: CODE_I9000XXJVS_CL565837_REV03_user_low_ship
It worked, the phone restarted and showed the firmware as being 2.3.5.
I don't know why, but I thought it would be a good idea to update the CSC and the pit and the modem as well- so I did that. when this was finished - though odin said that the flashing was successful the phone is completely unresponsive. The computer doesn't recognize it, it doesn't show any signs of life at all- like it's in the dark ages and there is no electricity in it.
HELP!!!
First question: do you think a jig will work? how dangerous is it?
second question: is there any other option to try that I haven't come across other than changing the motherboard, and if there isn't do you know where I can get one, bear in mind I live in Israel.
Please e-mail me a copy of the response to [email protected] if you can...
Odin dosnt pick it up atall plus the batteries dead aswell now and the stupid thing wont charge so i cant evan try any thing till i find away or some one to charge it but thanks for the tips.
gavster26 said:
Hi everyone. Im not normally in this section as i have an x8 but my friend has seen all the roms,mods and updates ive done so he tried to do it to his galaxy s i9000 without rooting or unlocking his bootloader. I asked him what he did he said he just tried to update software with keis but now it wont turn on just white screen with a red triangle in the middle i hope its download mode as i dont have a galaxy i dont really no but the battery has died and it wont charge im guessing hes damaged the bootloader am i right and if so whats the best corse of action to tepair it. Thanks.
Click to expand...
Click to collapse
Try to recharge the battery from other phone or use another battery.
Check whether you have the download mode working. (Home+Power+Volume down)
If yes, put phone in download mode and flash Darky RE or any other Rom via ODIN. Try to get the recovery mod after rooting and then try ROMs.
Or try restarting the phone it may work without update also. Long press power in download mode restarts the phone. However be careful.
What is the status of the device can you go to download mode
Post your firmware files name and how you choose in the odin flasher.
Dont try anything crazy you will bricked your device more:banghead:
Sent from my GT-P1000 using XDA
Alternate way to Download mode
Hi gavster26
I have been there with a buddy's phone... not a nice place.
Found a link showing this other trick ... but you have to trial and error this one on the different combos:
1. Phone off
2. USB cable pluged in
3. Odin running
4. Down (or Up - test both) Volume button + Home button + plug in the USB cable.
This booted my dead "bricked" phone into download mode.
Try it.
First of all, I'm sorry if the answer is somewhere, I searched, but I "only" found many threads with suggestions for JIG use... The three stickies of Q&A also don't present related information I believe...
After some stuck situation in odin, I can't boot the phone. I get a yellow triangle, between a phone and a computer icons. Even if I try to charge the Phone, I get that static screen.
There's anything I can do without using JIG? I cannot enter download mode (at least with the traditional way), I always get that screen. As fair as I know, the phone is still 2.1 with official firmware (i was trying to apple the 2.3.6)
Maxxd01 said:
First of all, I'm sorry if the answer is somewhere, I searched, but I "only" found many threads with suggestions for JIG use... The three stickies of Q&A also don't present related information I believe...
After some stuck situation in odin, I can't boot the phone. I get a yellow triangle, between a phone and a computer icons. Even if I try to charge the Phone, I get that static screen.
There's anything I can do without using JIG? I cannot enter download mode (at least with the traditional way), I always get that screen. As fair as I know, the phone is still 2.1 with official firmware (i was trying to apple the 2.3.6)
Click to expand...
Click to collapse
you are still in download mode, without a proper ROM, so just connect with ODIN and it will function once USB cable is plugged in and flash the correct i9000 gingerbread ROM for your location
xsenman said:
you are still in download mode, without a proper ROM, so just connect with ODIN and it will function once USB cable is plugged in and flash the correct i9000 gingerbread ROM for your location
Click to expand...
Click to collapse
The problem is, when entering ODIN, with the phone in this state, the phone is not detected at all by the computer, so ODIN fails to start...
Maxxd01 said:
The problem is, when entering ODIN, with the phone in this state, the phone is not detected at all by the computer, so ODIN fails to start...
Click to expand...
Click to collapse
follow the procedure on My Android solutions, link below for connection problems, or else flash with a lap top or on a another PC. But First power down the phone, remove battery, remove EXT SD card and SIM Card and power up again using combo keys for download mode
xsenman said:
follow the procedure on My Android solutions, link below for connection problems, or else flash with a lap top or on a another PC. But First power down the phone, remove battery, remove EXT SD card and SIM Card and power up again using combo keys for download mode
Click to expand...
Click to collapse
Yes, I tried the "first step solution" and all other ways you mention to enter download mode, but with no success
Maxxd01 said:
Yes, I tried the "first step solution" and all other ways you mention to enter download mode, but with no success
Click to expand...
Click to collapse
Install drivers of your phone to your laptop or PC. If you have correct drivers it should pick your phone straight way.
Sent from my GT-I9000 using xda app-developers app
rajamahbub said:
Install drivers of your phone to your laptop or PC. If you have correct drivers it should pick your phone straight way.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
I already have the drivers, they were installed back then when I tried to update the phone, so they are present now.
The problem is, I cant get out of the black screen of death.. in fact, I'm not sure if this model/version can enter download mode through combo keys, yesterday when the phone was borrowed to me, I tried and I couldn't, so I was using adb reboot download shell command - but anyway, the drivers are there.
Maxxd01 said:
I already have the drivers, they were installed back then when I tried to update the phone, so they are present now.
The problem is, I cant get out of the black screen of death.. in fact, I'm not sure if this model/version can enter download mode through combo keys, yesterday when the phone was borrowed to me, I tried and I couldn't, so I was using adb reboot download shell command - but anyway, the drivers are there.
Click to expand...
Click to collapse
Then try on different PC. It might have corrupted. If you can see the triangle it means it is on download mode so it should connect to PC.
Sent from my GT-I9000 using xda app-developers app
rajamahbub said:
Then try on different PC. It might have corrupted. If you can see the triangle it means it is on download mode so it should connect to PC.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Yes. I'm wondering if my Google Nexus S drivers didn't not conflicted with the drivers I installed. I don't know.
Well, I'll try with another laptop, if that don't work, is it advisable to use a jig connector from a "trusted" seller? I'm asking because I already saw a comment or two along the about blewed (is this a word?) up phones.
Hey mate had the same issue your gonna have to get a jig as a lot of the i9000's came with corrupted boot loaders so you can't get into download without the jig and the screen your on isn't download mode I know which one your talking about with the phone the triangle and the computer
Sent via that ninja standing right behind you
Latrop said:
Hey mate had the same issue your gonna have to get a jig as a lot of the i9000's came with corrupted boot loaders so you can't get into download without the jig and the screen your on isn't download mode I know which one your talking about with the phone the triangle and the computer
Sent via that ninja standing right behind you
Click to expand...
Click to collapse
Do I risk blowing up the phone using JIG?
No the jig basicly makes it so a certain voltage signal is sent to the CPU triggering download mode no risk at all
Sent via that ninja standing right behind you
I tried with another laptop with very well configured drivers, and didn't worked. Still didn't detected by odin. When I tried with another galaxy it works, after entering download mode...
I'm not admired, because before the brick, I was not able to enter the download mode with como keys, I shouldnt be surprised that does not happen now..
Follow this tutorial: http://forum.xda-developers.com/showthread.php?t=1494493
1) Uninstall your drivers, and re-install the ones following the instructions and link above.
2) Pull your battery out for a few mins and then put it back in and go into download mode (power, volume down, home button).
3) Download stock + odin from the link above, and start odin, and connect phone to pc through usb.
Your phone should be detected -- this is where you got stuck right? I'll assume if its detected, the rest you can figure out (plus its in the link above)
Good luck bro!
xmavrickx2005 said:
Follow this tutorial: http://forum.xda-developers.com/showthread.php?t=1494493
1) Uninstall your drivers, and re-install the ones following the instructions and link above.
2) Pull your battery out for a few mins and then put it back in and go into download mode (power, volume down, home button).
3) Download stock + odin from the link above, and start odin, and connect phone to pc through usb.
Your phone should be detected -- this is where you got stuck right? I'll assume if its detected, the rest you can figure out (plus its in the link above)
Good luck bro!
Click to expand...
Click to collapse
That would be a good suggestion if could get into download mode Tried everything, including some other solutions that I found around the Web. Looks like the bootloader was corrupted since the beginning, and now that I need it more than ever (because the black screen of death phone-!-pc), I stucked until (hopefully) i get a JIG... Already bought one, have to wait a few days to receive it. Until then, I'm going to use a old nokia.
Jig is only option then install a stock gingerbread that will fix 3 button combos
Sent via that ninja standing right behind you
Hello guys.
Finally solved the problem using JIG. Many thanks for all your help.
Maxxd01 said:
Hello guys.
Finally solved the problem using JIG. Many thanks for all your help.
Click to expand...
Click to collapse
Maxxd01 said:
Hello guys.
Finally solved the problem using JIG. Many thanks for all your help.
Click to expand...
Click to collapse
Hello, i've got the same prob with you but my bought JIG couldn;t solve the prob.
May I know where did you buy the JIG?
Thanks a lot.
bakatenchu said:
Hello, i've got the same prob with you but my bought JIG couldn;t solve the prob.
May I know where did you buy the JIG?
Thanks a lot.
Click to expand...
Click to collapse
eBay.
Maxxd01 said:
eBay.
Click to expand...
Click to collapse
Thanks a lot. Managed to get one that revived my phone well.
Hi all. I have a problem with an S5830 which was on 2.3.6 Stock+Root. It was network locked (even if with the code to check it said every lock was off), so I tried the factory reset solution listed here http://forum.xda-developers.com/showpost.php?p=9006090&postcount=1 using the code *2767*3855#. After the reboot my phone got stuck in a bootloop. I tried flashing with Odin many different fw, with and without data.rfs just to be sure it wasn't corrupted, but my phone just keep looping after the samsung logo.
Is there an easy way to fix it?
Thanks
Just in case it can be useful, more details:
1) After the Odin autoreboot it keeps lopping without even displaying the samsung logo (display just go on and off), but if i remove/insert battery and turn it on it loops after the samsung logo.
2) Download mode, Special download, and Ramdump mode works, but Recovery mode don't.
matrixino said:
Hi all. I have a problem with an S5830 which was on 2.3.6 Stock+Root. It was network locked (even if with the code to check it said every lock was off), so I tried the factory reset solution listed here http://forum.xda-developers.com/showpost.php?p=9006090&postcount=1 using the code *2767*3855#. After the reboot my phone got stuck in a bootloop. I tried flashing with Odin many different fw, with and without data.rfs just to be sure it wasn't corrupted, but my phone just keep looping after the samsung logo.
Is there an easy way to fix it?
Thanks
Just in case it can be useful, more details:
1) After the Odin autoreboot it keeps lopping without even displaying the samsung logo (display just go on and off), but if i remove/insert battery and turn it on it loops after the samsung logo.
2) Download mode, Special download, and Ramdump mode works, but Recovery mode don't.
Click to expand...
Click to collapse
For Recovery mode: did you tried when you release "Power" button, button "Vol Up" hold longer (when you see Samsung logo then release "Vol Up" button)?
Jonny_Brravo said:
For Recovery mode: did you tried when you release "Power" button, button "Vol Up" hold longer (when you see Samsung logo then release "Vol Up" button)?
Click to expand...
Click to collapse
The recovery mode in S5830 is only Home+Power, Home+Power+VolUP is RamDump mode.
matrixino said:
The recovery mode in S5830 is only Home+Power, Home+Power+VolUP is RamDump mode.
Click to expand...
Click to collapse
Ohh sorry, I have two smartphone (S5830 and S9001) and in this case my mind they went on S9001 - he have R.Mode with Vol Up + Power button
Jonny_Brravo said:
Ohh sorry, I have two smartphone (S5830 and S9001) and in this case my mind they went on S9001 - he have R.Mode with Vol Up + Power button
Click to expand...
Click to collapse
Ye I know I also have a I9000 and I9300 and it's like that too. This is just some phone a friend gave me because he didn't use it anymore.
Anyone to help this guy?
Reboot to recovery and do a factory data reset
Shaaan said:
Reboot to recovery and do a factory data reset
Click to expand...
Click to collapse
Please read the first post:
Just in case it can be useful, more details:
1) After the Odin autoreboot it keeps lopping without even displaying the samsung logo (display just go on and off), but if i remove/insert battery and turn it on it loops after the samsung logo.
2) Download mode, Special download, and Ramdump mode works, but Recovery mode don't.
Click to expand...
Click to collapse
Try reflashing via odin.
Sent from my GT-S5830 using xda premium
Venomous Viper 119 said:
Try reflashing via odin.
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
Read my first post. I tried.
matrixino said:
Read my first post. I tried.
Click to expand...
Click to collapse
Go to www.themythace.com/flash-stock-rom.html & follow the steps. After flashing, odin shows, closing serial port & rebooting device or something like that. Wait until pass appears. This time your device ends up in a boot loop. Now, take off battery & go back to downloading mode & reflash via odin. This time your device might boot. Atleast for me it did...
I never had a head ache & some one recommended me rooting !!!
Hmmm I'm afraid yours is bricked, though not unfixable.
When in odin did you use the right .ops file ?
Also, which recovery were you using ?
It is possible that your partitions are corrupted.
TjBurn said:
Hmmm I'm afraid yours is bricked, though not unfixable.
When in odin did you use the right .ops file ?
Also, which recovery were you using ?
It is possible that your partitions are corrupted.
Click to expand...
Click to collapse
I used the correct Cooperv1 ops (I had flashed with it other times when I was trying custom roms). I was using CWM as recovery. Also I tought about the partition getting corrupted, that's why I downloaded an old stock rom with all the filesystem .rfs files (including data) to recreate them, but still it didn't work. At this point my only guess is that efs got corrupted in some way (I even have a backup of it but dunno how to restore it, did it with the "cat xxx > /file" procedure while tring to get the network unlock code).
When you say it's not unfixable, what you mean exactly? Anything that I can do at home without sending it to Samsung?
Thanks for your time.
Hmmm. I suspect your guess is right, perhaps someone else may know how to restore it.
I had to send mine to Samsung, and although they said they gave me a new motherboard I suspect they simply used jtag.
Sent from my GT-S5830 using xda app-developers app
TjBurn said:
Hmmm. I suspect your guess is right, perhaps someone else may know how to restore it.
I had to send mine to Samsung, and although they said they gave me a new motherboard I suspect they simply used jtag.
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
What is this Jtag? Something that I can build at home? Any scheme?
matrixino said:
What is this Jtag? Something that I can build at home? Any scheme?
Click to expand...
Click to collapse
You can try searching about jtag & oneclickunbrick on google or on xda. Not sure what the processes involve but they help booting into downloading mode if you weren't able to before. But did you try what I suggested before ??
I used to have beautiful life before. Now I'm in engineering...!
Venomous Viper 119 said:
You can try searching about jtag & oneclickunbrick on google or on xda. Not sure what the processes involve but they help booting into downloading mode if you weren't able to before. But did you try what I suggested before ??
I used to have beautiful life before. Now I'm in engineering...!
Click to expand...
Click to collapse
Oh then it wouldn't help. I can boot in download mode, but flashing a stock rom didn't fix it. I tried several times.
Put it in download mode again and flash again or try a different rom. If you have download mode it isn't bricked its fixable from home
DEMOCRACY™NT
brewy said:
Put it in download mode again and flash again or try a different rom. If you have download mode it isn't bricked its fixable from home
DEMOCRACY™NT
Click to expand...
Click to collapse
I tried many times, with different roms, one package and not. Nothing fixed it. If it's the efs corrupted I think there is nothing you can do, even if I can go in download mode.
I think there is a way to flash cwm recovery via Odin you could try that, it could fix it but I'm not to sure but it's always worth ago
And when using Odin you just need ops file checked and one package checked and untick the first box were the three boxes are
DEMOCRACY™NT